A visible-light photodetector based on heterojunctions between CuO nanoparticles and ZnO nanorods

• Doan Nhat Giang,
• Nhat Minh Nguyen,
• Duc Anh Ngo,
• Thanh Trang Tran,
• Le Thai Duy,
• Cong Khanh Tran,
• Thi Thanh Van Tran,
• Phan Phuong Ha La and
• Vinh Quang Dang

Beilstein J. Nanotechnol. 2023, 14, 1018–1027, doi:10.3762/bjnano.14.84

• , these methods still face problems, including the requirements of controlling defects, scale-up for mass production, or troubles relating to decoration uniformity [31][32]. Another method is to form heterojunctions of ZnO and other narrow-bandgap semiconductors (NiO [33], PbS [34], CdS [35], and MoS2[36

• . There is a significant difference in stability as well as performance between devices with and without CuO NPs. Decoration of CuO NPs can narrow the bandgap of the heterostructure so that incident photons can quickly generate charge carriers. Interestingly, the CuO NPs/ ZnO NRs photodetector shows also

Antibody-conjugated nanoparticles for target-specific drug delivery of chemotherapeutics

• Mamta Kumari,
• Amitabha Acharya and
• Praveen Thaggikuppe Krishnamurthy

Beilstein J. Nanotechnol. 2023, 14, 912–926, doi:10.3762/bjnano.14.75

• specifically to the target site and inhibit the cancer progression. Nanoparticle surface decoration strategies Surface functionalization of NPs through conjugation of functional groups with biomolecules is one method to enhance the targeting efficiency (Figure 2b). For effective antibody functionalization, the

• techniques. (a) Carbodimide coupling, (b) maleimide coupling, and (c) click coupling of antibodies on nanoparticle surfaces. Non-covalent antibody functionalization on NP surfaces using adaptor molecules (such as avidin or streptavidin). Antibody decoration strategies on nanoparticle surfaces and therapeutic

A TiO₂@MWCNTs nanocomposite photoanode for solar-driven water splitting

• Anh Quynh Huu Le,
• Ngoc Nhu Thi Nguyen,
• Hai Duy Tran,
• Van-Huy Nguyen and
• Le-Hai Tran

Beilstein J. Nanotechnol. 2022, 13, 1520–1530, doi:10.3762/bjnano.13.125

• in Figure 2. They confirm that the TiO2@MWCNTs nanocomposite catalyst is successfully prepared via the hydrolysis reaction. It can be seen from Figure 2a that the morphology of MWCNTs is incoherent, curved, interlaced, and with little branching. Furthermore, a non-uniform decoration of TiO2 clusters

Zinc oxide nanostructures for fluorescence and Raman signal enhancement: a review

• Ioana Marica,
• Fran Nekvapil,
• Maria Ștefan,
• Cosmin Farcău and
• Alexandra Falamaș

Beilstein J. Nanotechnol. 2022, 13, 472–490, doi:10.3762/bjnano.13.40

• metallic layer [32], chemical synthesis [33], or nanosphere lithography. Usually, ZnO nanostructures are fabricated first, followed by the decoration with metallic nanostructures or a metallic layer, which is added by physical vapour deposition, including sputtering processes [6][34], ion sputtering, which

• allowed for the decoration of vertically aligned cone-shaped ZnO nanorods with Ag NPs on their sides and their top ends [35], and magnetron sputtering [7][36]. Electron beam evaporation of, for example, a 30 nm Au layer on ZnO nanopillars arrays [37] or of ZnO-elevated Au dimer nanostructures (Figure 2a,b

• metal-based nanocomposites can present several disadvantages, such as the use of complex polymer stabilizers, which result in toxic activity [40], SERS deactivation [41], or undesired signals in SERS analysis. Therefore, simple and rapid metal decoration methods have been applied recently. Some of these

Thermal oxidation process on Si(113)-(3 × 2) investigated using high-temperature scanning tunneling microscopy

• Hiroya Tanaka,
• Shinya Ohno,
• Kazushi Miki and
• Masatoshi Tanaka

Beilstein J. Nanotechnol. 2022, 13, 172–181, doi:10.3762/bjnano.13.12

• position of the steps. However, it should be noted that the step position indicated by the broken line at the upper-left corner changes significantly, indicating the decoration by the silicon atoms. Such a process is plausible because the silicon atoms on the substrate can be expelled via the oxidation

Morphology-driven gas sensing by fabricated fractals: A review

• Vishal Kamathe and
• Rupali Nagar

Beilstein J. Nanotechnol. 2021, 12, 1187–1208, doi:10.3762/bjnano.12.88

• to some excellent articles on hierarchical gas sensors that address such geometries [8][30][33][37]. Tin oxide-based fractals Yin et al. reported SnO2 nanoparticles with and without platinum (Pt) decoration synthesized using a sol–gel hydrothermal technique for gas sensing applications [63]. Figure

• comparison to pure SnO2 and different amounts of Pt decoration (viz. 0.2, 0.5, 1, and 2 atom %), the 1 atom % Pt-decorated SnO2 (Pt-SnO2) sample exhibited higher sensitivity, a faster response of 29 s at 350 °C, and was able to sense 0.08 ppm H2. The sensor response was highest for H2 as compared to CO, CH4

• hydrogen adsorption [64][65]. Figure 5d depicts the response of fab-fracs with D = 2.43 and 2.49 for different gases. Pt decoration can be seen to improve the sensing performance for all analyte vapors, and this can be attributed to the higher catalytic activity due to Pt 5d electrons and the fractal

The effect of cobalt on morphology, structure, and ORR activity of electrospun carbon fibre mats in aqueous alkaline environments

• Markus Gehring,
• Tobias Kutsch,
• Osmane Camara,
• Alexandre Merlen,
• Hermann Tempel,
• Hans Kungl and
• Rüdiger-A. Eichel

Beilstein J. Nanotechnol. 2021, 12, 1173–1186, doi:10.3762/bjnano.12.87

• fibres. In this study, cobalt-decorated fibres are prepared, and the influence of carbonisation temperature on the resulting particle decoration, as well as on fibre structure and morphology is discussed. Scanning electron microscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron

Fate and transformation of silver nanoparticles in different biological conditions

• Barbara Pem,
• Marija Ćurlin,
• Darija Domazet Jurašin,
• Valerije Vrček,
• Rinea Barbir,
• Vedran Micek,
• Raluca M. Fratila,
• Jesus M. de la Fuente and
• Ivana Vinković Vrček

Beilstein J. Nanotechnol. 2021, 12, 665–679, doi:10.3762/bjnano.12.53

• percentage of 20 nm particles in the case of AOT- and PVP-coated AgNPs. The major difference between different AgNPs was their potential values ζ, which were consistent with the charges of coating molecules used for their decoration. The ζ potential of AOT-AgNPs was strongly negative (−35.8 ± 6.9 mV), while

The impact of molecular tumor profiling on the design strategies for targeting myeloid leukemia and EGFR/CD44-positive solid tumors

• Nikola Geskovski,
• Nadica Matevska-Geshkovska,
• Simona Dimchevska Sazdovska,
• Marija Glavas Dodov,
• Kristina Mladenovska and
• Katerina Goracinova

Beilstein J. Nanotechnol. 2021, 12, 375–401, doi:10.3762/bjnano.12.31

• as specific motifs for the surface decoration of nanoscale carriers, mAbs generally improve the capacity of receptor-mediated active endocytosis and enhance the intracellular delivery of the carrier cargo [72][73]. However, it is ambiguous whether the downregulation effect is preserved when mAbs are

Nickel nanoparticle-decorated reduced graphene oxide/WO₃ nanocomposite – a promising candidate for gas sensing

• Ilka Simon,
• Alexandr Savitsky,
• Rolf Mülhaupt,
• Vladimir Pankov and
• Christoph Janiak

Beilstein J. Nanotechnol. 2021, 12, 343–353, doi:10.3762/bjnano.12.28

• 200 to 400 °C, which means a high power consumption [4]. WO3 is a wide-bandgap [12][13] n-type semiconductor [14][15] with good sensitivity towards NO2 [16] and CO [17]. Known successful routes to improve the MOS gas sensing performance are doping with transition metals, decoration with noble metals

• nanoparticles loaded with graphene have an enhanced acetone response at 350 °C with increased graphene loading level (best at 5 wt % graphene) [40]. ZnO nanostructures doped with nickel and rGO were used for hydrogen sensing at 100 °C [34]. The decoration of MOS with a noble metal, such as Pd or Pt, improves

• the sensitivity, response time and working temperature of MOS/rGO systems [15][41]. TiO2/rGO decorated with Pd and Pt nanoparticles was successfully used in the gas sensing of hydrogen gas [19]. The decoration of WO3/rGO nanosheets with Pt nanoparticles yielded a faster response for acetone at 200 °C

TiO_x/Pt₃Ti(111) surface-directed formation of electronically responsive supramolecular assemblies of tungsten oxide clusters

• Marco Moors,
• Yun An,
• Agnieszka Kuc and
• Kirill Yu. Monakhov

Beilstein J. Nanotechnol. 2021, 12, 203–212, doi:10.3762/bjnano.12.16

• within the hexagonal ring. STM images of the initially W3O9-covered w’-TiOx phase grown on Pt3Ti(111) after annealing the sample for 5 min. (a) Flashing the surface to 600 K leads to cluster agglomerations on the terraces and decoration of the step edges (98 × 98 nm; UB = 1.48 V; IT = 75 pA). (b) The

PEG/PEI-functionalized single-walled carbon nanotubes as delivery carriers for doxorubicin: synthesis, characterization, and in vitro evaluation

• Shuoye Yang,
• Zhenwei Wang,
• Yahong Ping,
• Yuying Miao,
• Yongmei Xiao,
• Lingbo Qu,
• Lu Zhang,
• Yuansen Hu and
• Jinshui Wang

Beilstein J. Nanotechnol. 2020, 11, 1728–1741, doi:10.3762/bjnano.11.155

• study, the carboxylated CNTs was conjugated with PEG groups after acidification, and subsequently modified by PEI. Although the functionalization approach and decoration sequence were different, the characterization results show that both approaches are feasible synthetic routes. Drug-loading efficiency

Scanning tunneling microscopy and spectroscopy of rubrene on clean and graphene-covered metal surfaces

• Karl Rothe,
• Alexander Mehler,
• Nicolas Néel and
• Jörg Kröger

Beilstein J. Nanotechnol. 2020, 11, 1157–1167, doi:10.3762/bjnano.11.100

• clusters of molecules can be discerned on the terrace without evidence for island formation or decoration of substrate step edges. These observations are indicative of an effectively reduced surface diffusion after adsorption, which lowers the mobility of adsorbed molecules and, thus, the formation of

Silver-decorated gel-shell nanobeads: physicochemical characterization and evaluation of antibacterial properties

• Marta Bartel,
• Katarzyna Markowska,
• Marcin Strawski,
• Krystyna Wolska and
• Maciej Mazur

Beilstein J. Nanotechnol. 2020, 11, 620–630, doi:10.3762/bjnano.11.49

• sulfonate beads modified with polyaniline followed by decoration with silver nanoparticles and demonstrated the considerable antibacterial activity of this material [24]. While the number of works on hybrid polymer/nanoparticle structures and their antibacterial activity is relatively limited, a great

• nanoparticles. This approach is similar in some aspects to synthetic strategies reported in the literature. For example, Li et al. [41] proposed the decoration of the surface of polystyrene microspheres with silver nanoparticles through adsorption (the Ag nanoparticles were generated in the solution through

Gold and silver dichroic nanocomposite in the quest for 3D printing the Lycurgus cup

• Lars Kool,
• Floris Dekker,
• Anton Bunschoten,
• Glen J. Smales,
• Brian R. Pauw,
• Aldrik H. Velders and
• Vittorio Saggiomo

Beilstein J. Nanotechnol. 2020, 11, 16–23, doi:10.3762/bjnano.11.2

• from the Roman Empire. Art historians and glass artists alike have wondered at the fabrication of its intricate structure since its first discovery [2]. Whether the cup was used as a drinking cup, lampshade or as decoration is still under debate [3]. The Lycurgus cup is worldwide admired in particular

Multiwalled carbon nanotube based aromatic volatile organic compound sensor: sensitivity enhancement through 1-hexadecanethiol functionalisation

• Nadra Bohli,
• Meryem Belkilani,
• Juan Casanova-Chafer,
• Eduard Llobet and
• Adnane Abdelghani

Beilstein J. Nanotechnol. 2019, 10, 2364–2373, doi:10.3762/bjnano.10.227

• spectroscopy (FTIR) were performed to characterize the gold nanoparticle decoration and to examine the thiol monolayer bonding to the MWCNTs. The detection of aromatic vapours using Au-MWCNT and HDT/Au-MWCNT sensors down to the ppm range shows that the presence of the self-assembled layer increases the

• , metal decoration or chemical functionalisation [13]. In the present work, we investigated the effect of gold nanoparticle decorated, multiwall carbon nanotubes functionalized with 1-hexadecanethiol on the sensor selectivity and sensitivity towards benzene and toluene vapours. Experimental Materials

• decoration of MWCNTs Prior to their deposition on the interdigitated electrode surface, the MWCNTs were treated by oxygen plasma to create oxygen vacancies on the walls of the CNTs in order to enhance their surface reactivity [14][15]. The detailed description of the experimental steps undertaken is

Gold-coated plant virus as computed tomography imaging contrast agent

• Alaa A. A. Aljabali,
• Mazhar S. Al Zoubi,
• Khalid M. Al-Batanyeh,
• Ali Al-Radaideh,
• Mohammad A. Obeid,
• Abeer Al Sharabi,
• Walhan Alshaer,
• Bayan AbuFares,
• Tasnim Al-Zanati,
• Murtaza M. Tambuwala,
• Naveed Akbar and
• David J. Evans

Beilstein J. Nanotechnol. 2019, 10, 1983–1993, doi:10.3762/bjnano.10.195

• development of a plant virus-based NP as a CT imaging agent. In this study, the plant cowpea mosaic virus (CPMV) was coated with a gold shell and the use as a CT contrast agent was evaluated. Although a few publications reported the decoration of the surface of virus capsids with preformed AuNPs in specific

Construction of a 0D/1D composite based on Au nanoparticles/CuBi₂O₄ microrods for efficient visible-light-driven photocatalytic activity

• Weilong Shi,
• Mingyang Li,
• Hongji Ren,
• Feng Guo,
• Xiliu Huang,
• Yu Shi and
• Yubin Tang

Beilstein J. Nanotechnol. 2019, 10, 1360–1367, doi:10.3762/bjnano.10.134

• /CBO composite were investigated by XRD (Figure 2a). For pure CBO, all characteristic diffraction peaks can be attributed to the monoclinic phase of CBO (JPCDS 72-493) [28]. After the decoration with Au NPs (2.5 wt % Au/CBO), there are two additional diffraction peaks at 38.2° and 44.4° that can be

Porous N- and S-doped carbon–carbon composite electrodes by soft-templating for redox flow batteries

• Maike Schnucklake,
• László Eifert,
• Jonathan Schneider,
• Roswitha Zeis and
• Christina Roth

Beilstein J. Nanotechnol. 2019, 10, 1131–1139, doi:10.3762/bjnano.10.113

• of the commercial felts (400 °C, up to 30 h) [7]. Also acid treatment [8], electrochemical activation [9], catalytic decoration with metal oxides [10][11], as well as methods to increase the surface area of the felts [12][13] have been reported as possible ways to obtain enhanced activity. Several

Synthesis of novel C-doped g-C₃N₄ nanosheets coupled with CdIn₂S₄ for enhanced photocatalytic hydrogen evolution

• Jingshuai Chen,
• Chang-Jie Mao,
• Helin Niu and
• Ji-Ming Song

Beilstein J. Nanotechnol. 2019, 10, 912–921, doi:10.3762/bjnano.10.92

• effective strategy, the combination of C-doping with nanocomposite semiconductors, is presented in this work. C-doped g-C3N4 (CCN) was prepared by supramolecular self-assembly and subsequently a number of CdIn2S4/CCN composite photocatalysts were designed and fabricated though in situ decoration of CdIn2S4

An iridescent film of porous anodic aluminum oxide with alternatingly electrodeposited Cu and SiO₂ nanoparticles

• Menglei Chang,
• Huawen Hu,
• Haiyan Quan,
• Hongyang Wei,
• Zhangyi Xiong,
• Jiacong Lu,
• Pin Luo,
• Yaoheng Liang,
• Jianzhen Ou and
• Dongchu Chen

Beilstein J. Nanotechnol. 2019, 10, 735–745, doi:10.3762/bjnano.10.73

• , Melbourne, VIC, Australia 10.3762/bjnano.10.73 Abstract The structurally colored surface of anodic aluminum oxide (AAO) is highly useful for decoration and anti-counterfeiting applications, which are of significance for both scientific and industrial communities. This study presents the first demonstration

Features and advantages of flexible silicon nanowires for SERS applications

• Hrvoje Gebavi,
• Vlatko Gašparić,
• Dubravko Risović,
• Nikola Baran,
• Paweł Henryk Albrycht and
• Mile Ivanda

Beilstein J. Nanotechnol. 2019, 10, 725–734, doi:10.3762/bjnano.10.72

• vacuum for one hour at temperatures from 480–560 °C was performed. In the VLS process, 26% SiH4 diluted in Ar with 270 sccm flow rate was deposited for 1 h. In each experiment, the annealing temperature was the same as the VLS process temperature. The Ag nanoparticle decoration of the horizontal SiNWs

• [35]). The influence of the capillary forces will be discussed in the following sections. Ag decoration and morphology of Si nanowires and immersion-induced changes Using 500 °C as the optimal VLS process temperature, we decorated SiNWs through Ag sputtering. The sputtering time varied from 3 to 30

Hydrophilicity and carbon chain length effects on the gas sensing properties of chemoresistive, self-assembled monolayer carbon nanotube sensors

• Juan Casanova-Cháfer,
• Carla Bittencourt and
• Eduard Llobet

Beilstein J. Nanotechnol. 2019, 10, 565–577, doi:10.3762/bjnano.10.58

• decoration of CNT sidewalls with Au nanoparticles, preventing their mobility and coalescence. The different thiols employed in this work were characterized by Raman spectroscopy (see Figure 2). A Peltier cell was used in order to keep samples at 4 °C and stabilize them, because unbound thiols present high

• CNTs with Au nanoparticles would lead to poor results [36]. Au is mobile on the surface of pristine CNTs, resulting in coalescence effects (uncontrolled size of particles and bad homogeneity in the decoration). Previous works have reported the benefits of employing oxygen-plasma-treated CNTs, which

• need to be subsequently decorated with Au nanoparticles. Oxygenated defects act as anchoring and nucleation sites. Therefore, high control in the decoration homogeneity and the size of Au nanoparticles (avoiding coalescence effects) have been reported in oxygen-plasma-treated CNTs [37]. Since

Ceria/polymer nanocontainers for high-performance encapsulation of fluorophores

• Kartheek Katta,
• Dmitry Busko,
• Yuri Avlasevich,
• Katharina Landfester,
• Stanislav Baluschev and
• Rafael Muñoz-Espí

Beilstein J. Nanotechnol. 2019, 10, 522–530, doi:10.3762/bjnano.10.53

• polyoxyethanyl α-tocopheryl sebacate [37] significantly reduces oxygen quenching. Last but not least, another possibility is to attach an oxygen scavenger (e.g., diphenylanthracene moieties) to the emissive dye itself [38]. Decoration of the molecular structure of cyanine dyes including a cyclodextrin complex

Targeting strategies for improving the efficacy of nanomedicine in oncology

• Gonzalo Villaverde and
• Alejandro Baeza

Beilstein J. Nanotechnol. 2019, 10, 168–181, doi:10.3762/bjnano.10.16

• . This example reflects how the combination of two targeting agents works on three levels of vectorization, namely tissular, cellular and subcellular targeting. As mentioned above, there are unwanted interaction effects between two agents, especially in the case of random decoration. Janus systems have