Characterization of the mechanical properties of qPlus sensors

Scholarly Works

• Weymouth, A. J.; Gretz, O.; Riegel, E.; Giessibl, F. J. Measuring sliding friction at the atomic scale. Japanese Journal of Applied Physics 2022, 61, SL0801. doi:10.35848/1347-4065/ac5e4a
• Scheil, K.; Gruber, M.; Ondráček, M.; Berndt, R. Force Spectroscopy of Iron Tetraphenylporphyrin Molecules with Cl Tips. The Journal of Physical Chemistry C 2020, 124, 26889–26896. doi:10.1021/acs.jpcc.0c08894
• Zhang, X.; Gao, F.; Xide, L. Sensing Performance Analysis on Quartz Tuning Fork-Probe at the High Order Vibration Mode for Multi-Frequency Scanning Probe Microscopy. Sensors (Basel, Switzerland) 2018, 18, 336. doi:10.3390/s18020336
• Hao, L.; Wang, Q.; Peng, P.; Zhenxing, C.; Jiao, W.; Yang, F.; Liu, W.; Wang, R.; He, X. Calibrating conservative and dissipative response of electrically-driven quartz tuning forks. Ultramicroscopy 2016, 174, 106–111. doi:10.1016/j.ultramic.2016.12.015
• Dagdeviren, O. E.; Schwarz, U. D. Numerical performance analysis of quartz tuning fork-based force sensors. Measurement Science and Technology 2016, 28, 015102. doi:10.1088/1361-6501/28/1/015102
• Nony, L.; Bocquet, F.; Para, F.; Loppacher, C. Frequency shift, damping, and tunneling current coupling with quartz tuning forks in noncontact atomic force microscopy. Physical Review B 2016, 94, 115421. doi:10.1103/physrevb.94.115421
• Abrahamians, J.-O.; Van, L. P.; Regnier, S. Contributed Review: Quartz force sensing probes for micro-applications. The Review of scientific instruments 2016, 87, 071502. doi:10.1063/1.4958896
• Melcher, J.; Stirling, J.; Shaw, G. A. A simple method for the determination of qPlus sensor spring constants. Beilstein journal of nanotechnology 2015, 6, 1733–1742. doi:10.3762/bjnano.6.177
• Caffrey, N. M.; Buchmann, K.; Hauptmann, N.; Lazo, C.; Ferriani, P.; Heinze, S.; Berndt, R. Competing Forces during Contact Formation between a Tip and a Single Molecule. Nano letters 2015, 15, 5156–5160. doi:10.1021/acs.nanolett.5b01383
• Labidi, H.; Kupsta, M.; Huff, T.; Salomons, M.; Vick, D.; Taucer, M.; Pitters, J. L.; Wolkow, R. A. New fabrication technique for highly sensitive qPlus sensor with well-defined spring constant. Ultramicroscopy 2015, 158, 33–37. doi:10.1016/j.ultramic.2015.06.008
• Sweetman, A.; Jarvis, S.; Moriarty, P. Mechanochemistry at Silicon Surfaces. Noncontact Atomic Force Microscopy; Springer International Publishing, 2015; pp 247–274. doi:10.1007/978-3-319-15588-3_13
• Beekmans, S. V.; Iannuzzi, D. A metrological approach for the calibration of force transducers with interferometric readout. Surface Topography: Metrology and Properties 2015, 3, 025004. doi:10.1088/2051-672x/3/2/025004
• Telychko, M.; Berger, J.; Majzik, Z.; Jelínek, P.; Švec, M. Graphene on SiC(0001) inspected by dynamic atomic force microscopy at room temperature. Beilstein journal of nanotechnology 2015, 6, 901–906. doi:10.3762/bjnano.6.93
• Melcher, J.; Stirling, J.; Cervantes, F. G.; Pratt, J. R.; Shaw, G. A. A self-calibrating optomechanical force sensor with femtonewton resolution. Applied Physics Letters 2014, 105, 233109. doi:10.1063/1.4903801
• Hou, Y.; Lu, Q. The coefficient of the voltage induced frequency shift measurement on a quartz tuning fork. Sensors (Basel, Switzerland) 2014, 14, 21941–21949. doi:10.3390/s141121941
• Spadafora, E. J.; Berger, J.; Mutombo, P.; Telychko, M.; Švec, M.; Majzik, Z.; McLean, A. B.; Jelínek, P. Identification of Surface Defects and Subsurface Dopants in a Delta-Doped System Using Simultaneous nc-AFM/STM and DFT. The Journal of Physical Chemistry C 2014, 118, 15744–15753. doi:10.1021/jp503410j
• Falter, J.; Stiefermann, M.; Langewisch, G.; Schurig, P.; Hölscher, H.; Fuchs, H.; Schirmeisen, A. Calibration of quartz tuning fork spring constants for non-contact atomic force microscopy: direct mechanical measurements and simulations. Beilstein journal of nanotechnology 2014, 5, 507–516. doi:10.3762/bjnano.5.59
• Kim, J.; Won, D.; Sung, B.; An, S.; Jhe, W. Effective stiffness of qPlus sensor and quartz tuning fork. Ultramicroscopy 2014, 141, 56–62. doi:10.1016/j.ultramic.2014.03.009
• Shaw, G. A. Improvement in Uncertainty of Tuning Fork-Based Force Sensor Stiffness Calibration via the Indentation Method Using Direct Determination of Contact and Machine Compliance. MEMS and Nanotechnology, Volume 5; Springer International Publishing, 2013; pp 125–128. doi:10.1007/978-3-319-00780-9_16
• Resta, A.; Leoni, T.; Barth, C.; Ranguis, A.; Becker, C.; Bruhn, T.; Vogt, P.; Le Lay, G. Atomic structures of silicene layers grown on Ag(111): scanning tunneling microscopy and noncontact atomic force microscopy observations. Scientific reports 2013, 3, 2399. doi:10.1038/srep02399

Explore citations to this article at