Institute of Chemistry, Chemnitz University of Technology, Straße der Nationen 62, 09111 Chemnitz, Germany biaxial nematics liquid crystals phase engineering thiadiazoles V-shaped mesogens A series of V-shaped, shape-persistent thiadiazole nematogens, based on an oligo(phenylene ethynylene) scaffold with ester groups connected via alkyloxy spacers, was efficiently prepared by a two-step procedure. Phase engineering results in an optimum of the mesophase range and low melting temperature when the nematogens are desymmetrised with a butoxy and a heptyloxy spacer. The mesophases are enantiotropic and over the whole temperature range nematic. For the optimised mesogen structure, optical investigations by conoscopy monitored a uniaxial nematic phase upon cooling from the isotropic phase to room temperature (Δ T = 150 °C). X-ray studies on magnetic-field-aligned samples of this mesogen family revealed a general pattern, indicating the alignment of two molecular axes along individual directors in the magnetic field. These observations may be rationalised with larger assemblies of V-shaped molecules isotropically distributed around the direction of the magnetic field.

Most molecules forming nematic liquid crystals, the nematogens, are based on rod-shaped (calamitic), anisometric cores with peripheral flexible chains along the molecular long axis . Nematic phases are the simplest liquid crystalline mesophases, in which phase anisotropy of crystals is combined with fluid properties of liquids. In the nematic phases of calamitic mesogens only the molecular long axes are oriented along a so called director and the molecular centres of gravity are distributed like in a liquid. In models, the molecules are thought to turn rapidly about their long axis and therefore the shape of nematogens in theoretical studies has been simplified to a spherocylinder . These phases are called uniaxial. Almost 40 years ago, M. J. Freiser predicted that real nematogens possess a non-cylindrical shape and thus should be able to form biaxial nematic phases at an appropriate low temperature . What is a biaxial nematic phase and why is it so interesting? Uniaxial and biaxial phases can be best understood by the property from which this classification originates: the behaviour when light propagates in the material. The optical property of a uniaxial phase in a monodomain can be described by two refractive indices spanning a rotationally symmetric ellipsoid, also called indicatrix ( , left side). There is one particular direction, perpendicular to the circular cross section of this special ellipsoid, along which the propagating linear polarised light does not change its polarisation. This direction is called the optical axis. In a uniaxial phase there is only one optical axis. However, if the monodomains of materials have to be optically described with three different refractive indices, the indicatrix is an ellipsoid spanned by three different semi-principal axes, possessing two different circular cross sections and consequently two optical axes ( , right side). In a biaxial nematic phase three molecular axes align along individual directors resulting in a material with three different refractive indices. However, at the same time this material has a liquid-like distribution of the molecular centres of gravity. In spite of the high molecular mobility the high order should be maintained. These two parameters have to be balanced extremely precise in order to obtain a thermotropic biaxial nematic with molecules of low molar mass . Historically, a biaxial nematic phase was found first in lyotropic mixtures, where the micellar shape can be gradually tuned . A thermotropic biaxial nematic phase of molecules of low molar mass is in high demand because of its potential application in display technology. After the discovery of the biaxial nematic phase in lyotropic materials, many claims of biaxial thermotropic nematic phases were published without being accepted . During this period also banana-shaped molecules were discovered and theoreticians highlighted the possibility to use bent-shaped molecules with rigorously defined shape (bending angle) for the formation of the desired phase . But it was not until 2004 that sufficient evidence was presented for biaxiality of nematic phases in the series of V-shaped oxadiazoles by X-ray diffraction and solid-state 2 H NMR spectroscopy . This has been recently confirmed by various other methods . Since then several new materials have been designed and reported to be biaxial, among others tetrapodes and banana-shaped oligoesters . However, there is still a controversial discussion about the phase biaxiality of these materials and their switching behaviour . All these latter molecular structures are, however, flexible and can change their conformation and thus their shape. Since theoretically biaxial nematic phases were predicted for a molecule with a defined shape and angle, we aimed to design a shape-persistent molecular scaffold of type I ( ) based on oligo(phenylene ethynylene) building blocks. These molecules show liquid crystal behaviour only with a flat bending unit possessing a dipole along the apex of the mesogen, sufficiently long aliphatic chains R and at least one pyridyl or acceptor substituted aromatic unit at the periphery of the molecule . Fluorenone , oxadiazole , thiazole and thiadiazole derivatives have been synthesised and evidence for biaxiality in their monotropic nematic phases has been presented. Monotropic phases are metastable and crystallise, thus making detailed studies of these phases extremely difficult. Therefore, low temperature stable (enantiotropic) phases are urgently demanded. In an earlier theoretical work, weak hydrogen bonds were suggested to possibly induce and stabilise biaxial nematic phases . Therefore, we modified our design concept and attached ester groups to the peripheral aromatic unit via an alkyloxy spacer to obtain the general structures of type II . The esters may be subsequently cleaved, in order to generate carboxylic acids and thus hydrogen bonded dimers and oligomers. In this article, the synthesis of a series of thiadiazoles of general structure II is presented and the successful approach to low temperature, enantiotropic nematic liquid crystals in the family of bent-shaped oligo(phenylene ethynylenes) will be discussed.

The shape-persistent arms of the new nematogens were prepared following the recent optimised procedure , using the mono-protected diethynylbenzene derivative 4 as a key compound ( ). The peripheral aromatic units 5 were obtained by etherification of 4-iodophenol with the corresponding ethyl ω-bromoalkanoate . Cross-coupling of iodobenzene 5 with ethynyl compound 4 and subsequent cleavage of the silyl protecting group afforded the arm derivatives 6 . As in the previously published two-step synthesis, the arms 6 were linked successively to the non-symmetric thiadiazole bending unit 7 ( ) . All compounds were carefully purified and characterised by 1 H, 13 C NMR, mass spectrometry and elemental analysis (see experimental section).

The thermotropic behaviour of all materials was investigated by differential scanning calorimetry (DSC) and polarised optical microscopy (POM). The results are collected in . Interestingly, all phenylene ethynylene oligomers show exclusively enantiotropic nematic liquid crystal phases, even for the hockey stick shaped intermediates 3 . However, the temperature intervals for the latter are small, approaching a maximum of 43 °C for compound 3c and melting in all cases occurs only above 100 °C ( ). In this series, an odd-even behaviour becomes apparent for the Cr–N, as well as for the N–I transition with increasing chain length (n = 4–7) . It is important to note that for the first three members ( 3a – c ) there is only a small impact of the chain length on the phase transition temperatures. Only with the heptyl chains do the transition temperatures decrease significantly. A closer look at transition enthalpies and entropies reveal very small values for 3a and 3b (Δ H = 0.1 kJ·mol −1 ; Δ S = 0.2 J·K −1 ·mol −1 ). Entropy values approaching zero, i.e. second order transitions, are predited for direct transitions from the isotropic liquid to the biaxial nematic phase for biaxial molecules . Thus, these hockey stick shaped derivatives may be good candidates for the investigation of the presence of phase biaxiality. POM studies reveal for derivatives 3a – e Schlieren textures with two and four brushed disclinations. Homeotropic alignment to study possible biaxiality of the samples was not obtained. Only for a sample of compound 3a could planar aligned thin LC films be prepared. Upon rotation of the sample the film became alternately dark at 0° and birefringent at 45°. compares the transitions of symmetric V-shaped compounds 1a – e . The transition temperatures I–N decrease from compounds with a short peripheral spacer between the aromatic and the ester group to long spacer derivatives. A clear odd-even effect is revealed. The transition enthalpies and entropies are relatively high (Δ H = 1.6–1.9 kJ·mol −1 ; Δ S = 3.6–4.2 J·K −1 ·mol −1 ) pointing to first order transitions. Melting temperatures and melting enthalpies follow a different progression; they decrease from 1a to 1b and increase again from 1b to 1e . All melting temperatures are relatively high (above 90 °C). In order to lower the latter, non-symmetric V-shaped mesogens 2 with two arms consisting of different peripheral building blocks have been prepared. The series of molecules 2a – c , 2f with a pentanoic acid ethyl ester group on one side shows a decrease in melting and clearing temperatures with increasing spacer lengths on the other arm. The decrease of melting temperature dominates and reaches a minimum for molecule 2c with an octanoic acid ethyl ester as a peripheral group. In this series of molecules no apparent odd-even effect can be monitored. The thermotropic properties in comparison with the increasing lengths of the peripheral alkanoic acid ethyl ester spacers are illustrated in . Apparently, the clearing temperature decreases with the total number of peripheral methylene groups (from 179.1 °C for 1a to 155.2 °C for 1e ). Note that non-symmetric compounds always possess lower melting and higher clearing temperatures compared to their symmetric counterparts with the same number of methylene groups (compare 1b / 2b and 1d / 2f ). It appears that a large difference in chain lengths results in higher stability of the mesophase, i.e. a low crystallisation tendency (see 2f , 2g , 2b and 2c and compare to 2d and 2a ). Maximum LC temperature intervals for enantiotropic liquid crystalline phases of 109 °C and 108 °C were found for 2b and 2c , showing the success of the strategy for this series of compounds. Note, as indicated in , that some of the samples can be supercooled without crystallisation. Some materials can be stored for more than 1 h at 25 °C without visible formation of crystal grains. Microscopy studies were performed to examine the nature of the mesophases. POM revealed for all samples Schlieren textures with two and four brushed disclinations ( ) typically observed for nematic phases. The high mobility of the phases, combined with a blaze of colours upon external pressure and the absence of homeotropic alignment after shearing, is also a sign of their nematic nature. The nematic materials aligned preferentially planar on conventional glass substrates and between glass coated with antiparallel rubbed polyimide alignment layers. Rotation of the samples exhibited alternately birefringent and dark textures. Conoscopy switched between a blurry conoscopic cross and birefringent photographs. However, the circular polariser could not reveal any optical axes. These results would be expected for uniaxial as well as biaxial nematic phases with planar alignment. Only homeotropic aligned samples allow distinction between uniaxial and biaxial phases. In the case of 2c small homeotropically aligned areas could be obtained on glass substrates. Conoscopy revealed positive optical anisotropy, thus the molecules’ long axes are aligned perpendicular to the glass substrate. The black texture between the crossed polarisers at all rotation angles of the sample indicates the uniaxial nature right after the phase transition, further confirmed by the conoscopic cross. Upon cooling, the sample becomes slightly birefringent in some areas. This process yielded an inhomogenous texture pointing to the formation of multiple small domains. The domains which remained dark revealed a conoscopic cross at all temperatures. The symmetry of the cross changed only slightly upon rotation of the sample. These observations are in good agreement with the uniaxial nature of the nematic phase of nematogen 2c even at room temperature.

X-ray studies were performed on magnetic-field-aligned samples with the X-ray beam perpendicular to the alignment direction. shows a typical X-ray pattern found for all investigated derivatives with three diffuse pairs of reflections (i–iii) and a halo (iv) corresponding to the average separation of the liquid-like chains. As shown in , reflections (i) are assigned to the separation of the molecules along the bisector. Reflections (ii) correspond to a distance which can be rationalised by the separation of two antiparallel thiadiazole rings along the molecular long axis. Reflections (iii) are typical for the π–π distance between conjugated molecules. Note that for reflections (i) and (iii) the reflection conditions cannot be simultaneously fulfilled. This points to the fact that at least two distinct domains are observed by the experiment . summarises the Bragg distances d together with the correlation lengths ξ/ d obtained by the Scherrer formula . It reveals that the values d (i–iv) are not a function of the spacer lengths between peripheral aromatic units and the ester groups. For example d (i) distances are almost constant in the range of 15–16 Å although the molecular length increases by 12 CH 2 units from compound 1a to 1e . Even the distances d (ii), attributed to the molecular long axis, on which the different spacer length should have the largest impact, remain constant between 9 and 10 Å. The latter can be rationalised when the electron-poor thiadiazole units interact with the electron-rich 2,5-dialkyloxybenzenes of an antiparallel aligned mesogen. As illustrated in , the sulfur atoms are then separated throughout the sample on average by 9–10 Å. The fact that with small angle X-ray scattering no reflection corresponding to the overall molecular length could be found is not fully understood. The correlation lengths ξ/ d are all in the range of 3–5 repeating units indicating the absence of any long range positional order and thus confirming the nematic nature of the mesophases. The π–π-distances are relatively large and only marginally smaller than the average separation of alkyl chains. However, at this temperature range similar values have been obtained previously in the series of fluorenone derivatives, in which the π–π interaction increased with decreasing temperature and moderated the uniaxial to biaxial transition . X-ray diffraction shows the orientation of two molecular axes in this mesogen family, which may be an indication for phase biaxiality. In contrast, the optical experiments of compound 2c point to the uniaxial nature of its nematic phase. In order to rationalise these two different results, it can be assumed on the bases of the correlation lengths that the thiadiazoles form small aggregates. These aggregates are responsible for the observed diffuse X-ray pattern, however, they either rotate about their long axis or the two different axes of the aggregates are isotropically distributed around the direction of the magnetic field, eventually resulting in a uniaxial phase even at room temperature. The latter model has been recently suggested by a theoretical work from Vanakaras , in which three different uniaxial and biaxial nematic phases based on aggregates or clusters have been proposed. The model is further supported by results obtained from a bent-shaped oxazole derivative, which forms polar clusters in the nematic phase . However, further work is in progress in order to draw a more detailed picture of the supramolecular organisation of thiadiazole derivatives 1 and 2 in their nematic phase.

Thiadiazole nematogens with ester groups connected via alkyloxy spacers could be efficiently prepared by a previously reported two-step procedure. These mesogens are capable of hydrogen bonding if the esters are cleaved. The mesophase range and the melting temperature reach an optimum when the nematogens are desymmetrised with a butoxy and a heptyloxy spacer. For this molecule, optical observations by conoscopy monitored a uniaxial nematic phase over the whole temperature range of 150 °C upon cooling from the isotropic phase to room temperature. X-ray diffraction points to the alignment of two axes in the magnetic field in this family of mesogens. Both features may be rationalised if larger assemblies of V-shaped molecules are isotropically distributed around the direction of the magnetic field, thus leading only to uniaxial nematic phases. Work is in progress to synthesise molecules with a smaller bending angle in order to induce possibly a biaxial order at high temperature.

Chemicals were obtained from Fisher Scientific and Sigma-Aldrich and used as received. The synthesis of compounds 4 and 7 was described previously. Column chromatography was carried out on silica 60 (Merck, mesh 70–230). PFT 1 H and 13 C NMR spectra were recorded in CDCl 3 with a Varian Oxford 400 MHz spectrometer with the residual solvent signal at 7.26 ppm as a reference. Mass spectra were obtained on a Finnigan MAT95 (FD MS). Elemental analysis was carried out in the microanalytical laboratory at the University of Mainz. POM observations were made with a Zeiss Axioscop 40 equipped with a Linkam THMS600 hot stage. DSC was performed using a Perkin Elmer Pyris 1. X-ray diffraction measurements were carried out on powder samples in glass capillaries of 1.5 mm diameter. The nematic phases were aligned in a magnetic field (1T) upon cooling from the isotropic to the nematic phase. The WAXS measurements were performed by using a standard copper anode (2.2 kW) source with pinhole collimation equipped with a X-ray mirror (Osmic typ CMF15-sCu6) and a Bruker detector (High-star) with 1024 × 1024 pixels. The diffraction data were calibrated by using silver behenate as a calibration standard . The X-ray patterns were evaluated using the datasqueeze software (http://www.datasqueezesoftware.com/).

The mixture of 1.0 equiv of thiadiazole 7 , 1.0 equiv of the corresponding terminal alkyne 6a – e , 0.1 equiv of Pd(PPh 3 ) 4 and 0.05 equiv of CuI in piperidine is stirred for 2 h at room temperature. Subsequently, the solvent is removed in vacuo and the products are isolated by column chromatography using a mixture of EtOAc/hexane. 2-{4-[4-{4-[4-(Ethoxycarbonyl)butoxy]phenylethynyl}-2,5-bis(hexyloxy)phenyl]ethynylphenyl}-5-(4-bromophenyl)-1,3,4-thiadiazole ( 3a ) Hexane/EtOAc = 6/1 ( R f  = 0.25), yellow solid; yield 0.12 g (78%). 1 H NMR (400 MHz, CDCl 3 ): δ = 7.99 (2H, AA′BB′), 7.89 (2H, AA′BB′), 7.64 (4H, AA′BB′), 7.46 (2H, AA′BB′), 7.02 (s, 1H), 7.01 (s, 1H), 6.86 (2H, AA′BB′), 4.14 (q, 2H, COOCH 2 CH 3 , J = 7.2), 4.05 (t, 2H, OCH 2 , J = 6.4), 4.04 (t, 2H, OCH 2 , J = 6.4), 3.99 (m, 2H, OCH 2 ), 2.39 (t, 2H, CH 2 COOEt, J = 7.2), 1.85 (m, 8H, CH 2 ); 1.55 (m, 4H, CH 2 ); 1.36 (m, 8H, CH 2 ); 1.26 (t, 3H, CH 3 , J = 7.2); 0.91 (t, 3H, CH 3 , J = 7.2), 0.90 (t, 3H, CH 3 , J = 7.2); 13 C NMR (100 MHz, CDCl 3 ): δ = 173.8 (C q , C=O), 167.9, 167.2 (C q , N=C–S); 159.3 (C q , C–OCH 2 ), 154.0, 153.3 (C q , C–OC 6 H 13 ), 133.2, 132.6, 132.4 (C t ), 129.4 (C t ), 129.1 (C q ), 127.9 (C t ), 126.8, 125.8 (C q ), 117.0, 116.8 (C t ); 115.4, 115.2 (C q ), 114.6 (C t ), 112.9 (C q ), 95.6, 94.0, 89.2, 84.7 (C≡C), 69.8, 69.7, 67.8 (OCH 2 ), 60.4 (COOCH 2 CH 3 ), 34.4 (CH 2 COOEt), 31.7, 29.5, 29.4, 29.0, 25.9, 25.8, 24.8, 22.8 (CH 2 ), 14.4, 14.2 (CH 3 ); EA: Calc. for C 59 H 53 BrN 2 O 5 S: C 68.28, H 6.20, N 3.25, S 3.72; Found: C 68.38, H 6.31, N 3.33, S 3.70; FD MS: m/z [%]:861.7 (87, [M+2] + ); 859.7 (100, M + ).

The mixture of 1.0 equiv of thiadiazole derivatives 3a – e , 1.0 equiv of the corresponding terminal alkine 6a – e , 0.2 equiv of Pd(PPh 3 ) 4 and 0.1 equiv of CuI in piperidine is stirred for 2 h at 65 °C. The solvent is then removed in vacuo and the products are isolated by means of column chromatography using a mixture of EtOAc/hexane. 2,5-Bis-{4-[4-{4-[4-(ethoxycarbonyl)butoxy]phenylethynyl}-2,5-bis(hexyloxy)phenyl]ethynylphenyl}-1,3,4-thiadiazole (1a) Hexane/EtOAc = 6/1 ( R f  = 0.1), yellow solid; yield 120 mg (74%). 1 H NMR (400 MHz, CDCl 3 ): δ = 8.00 (4H, AA′BB′), 7.64 (4H, AA′BB′), 7.46 (4H, AA′BB′), 7.02 (s, 2H), 7.01 (s, 2H), 6.86 (4H, AA′BB′), 4.13 (q, 4H, COOCH 2 CH 3 , J = 7.2), 4.04 (t, 4H, OCH 2 , J = 6.4), 4.03 (t, 4H, OCH 2 , J = 6.4), 3.98 (t, 4H, OCH 2 , J = 6.4), 2.34 (t, 4H, CH 2 COOEt, J = 7.2), 1.85 (m, 16H, CH 2 ), 1.55 (m, 8H, CH 2 ), 1.37 (m, 16H, CH 2 ), 1.26 (t, 6H, CH 3 , J = 7.2), 0.91 (t, 6H, CH 3 , J = 7.2), 0.90 (t, 6H, CH 3 , J = 7.2); 13 C NMR (100 MHz, CDCl 3 ): δ = 173.6 (C q , C=O), 167.8 (C q , N=C–S), 159.2 (C q , C–OCH 2 ), 154.0, 153.5 (C q , C–OC 6 H 13 ), 133.2, 132.3 (C t ), 129.6 (C q ), 127.9 (C t ), 126.7 (C q ), 117.0, 116.8 (C t ), 115.5, 115.2 (C q ), 114.6 (C t ), 112.9 (C q ), 95.5, 94.1, 89.2, 84.7 (C≡C), 69.8, 69.7, 67.6 (OCH 2 ), 60.5 (COOCH 2 CH 3 ), 34.1 (CH 2 COOEt), 31.8, 29.4, 28.7, 25.9, 22.81, 22.79, 21.7 (CH 2 ), 14.4, 14.2 (CH 3 ); EA: Calc. for C 84 H 98 N 2 O 10 S: C 75.99, H 7.44, N 2.11, S 2.41; Found: C 75.94, H 7.47, N 2.05, S 2.42; FD MS: m/z [%]: 1325.9 (100, M + ); 663.1 (70, M 2+ ).

Uniaxial nematic (left) and biaxial nematic (right) phases and their corresponding indicatrices.

Design of V-shaped, shape-persistent oligo(phenylene ethynylene) mesogens of type I and II (R, R′ = alkyl chains; n, m = 4–10).

Comparison of the mesophase ranges of intermediate hockey stick compounds 3 and symmetric V-shaped nematogens 1 .

Comparison of the thermal behaviour of symmetric and non-symmetric V-shaped molecules. The molecules are ordered from the bottom to the top by increasing total number of spacer CH 2 groups ( n + m ).

Textures of the nematic phase of 2c . a) Schlieren texture at 173 °C. b) and c) Planar alignment on rubbed polyimide at 167 °C (R = rubbing direction). d) Homeotropic aligned area of 2c on glass at 163 °C. e) Conoscopic picture at 161 °C and f) Conoscopic picture using the circular polariser.

X-ray study of nematic mesophases from V-shaped mesogens. A: Diffraction pattern of 2c at 70 °C. B: Model of the local molecular order and characteristic distances corresponding to reflections (i) and (ii).

Synthesis of arm derivatives 6 . Reaction conditions: (i) 1) Pd(PPh 3 ) 4 , CuI, piperidine, rt; 2) TBAF, THF, rt. Two-step synthesis of V-shaped nematogens: symmetric ( 1 ) and non- C 2 -symmetric ( 2 ) thiadiazoles. Reaction conditions: (i) Pd(PPh 3 ) 4 , CuI, piperidine, rt; (ii) Pd(PPh 3 ) 4 , CuI, piperidine, 65 °C. Compound Rate 10 °C/min (Onset [°C] / Δ H [kJ/mol]) a Δ S N [J·mol −1 ·K −1 ] 3a Cr 126 / 35.1 N 159 / 0.1 I 0.2 3b Cr 120 / 44.0 N 158 / 0.1 I 0.2 3c Cr 119 / 47.0 N 162 / 0.9 I 2.1 3d Cr 112 / 42.6 N 141 / 1.4 I 3.4 3e Cr 118 / 58.0 N 150 / 0.9 I 2.1 1a Cr 96 / 65.9 N 179 / 1.8 I 4.0 1b Cr 91 / 55.6 N 171 / 1.6 I 3.6 1c Cr 99 / 56.5 N 174 / 1.8 I 4.0 1d Cr 108 / 57.6 N 164 / 1.9 I 4.4 1e Cr 108 / 117.7 N 155 / 1.8 I 4.2 2a Cr 88 / 102.3 N 179 / 1.9 I 4.2 2b Cr 68 / 38.5 b N 178 / 1.9 I 4.2 2c Cr 67 / 37.0 b N 175 / 1.8 I 4.0 2d Cr 89 / 48.3 N 175 / 1.7 I 3.8 2e Cr 96 / 55.5 N 171 / 1.8 I 4.1 2f Cr 70 / 37.3 b N 168 / 1.7 I 3.9 2g Cr 77 / 53.6 b N 162 / 1.7 I 3.9 a Data are given for the second heating. b Data for the first heating.

Thermotropic behaviour of hockey stick compounds 3 and V-shaped molecules 1 and 2 .

Compound T [°C] d (i) [Å] (ξ/ d ) d (ii) [Å] (ξ/ d ) d (iii) [Å] (ξ/ d ) d (iv) [Å] (ξ/ d ) 1a 105 15.1 (4.0) 10.2 (4.2) 4.3 (5.2) 4.6 (4.3) 2a 80 14.9 (4.1) 9.8 (4.4) 4.2 (5.3) 4.4 (4.7) 1c 100 15.7 (3.4) 9.3 (4.3) 4.4 (5.4) 4.6 (4.1) 2c 70 15.2 (2.4) 9.5 (6.3) 4.0 (6.1) 4.7 (3.7) 1e 105 16.4 (2.8) 9.5 (4.3) 4.4 (5.4) 4.6 (3.9)

X-ray diffraction data. The correlation length ξ was estimated from the half width of the reflections by using the Scherrer formula .

ASJMTUJDIKZLMB-UHFFFAOYSA-N InChI=1S/C14H8BrIN2S/c15-11-5-1-9(2-6-11)13-17-18-14(19-13)10-3-7-12(16)8-4-10/h1-8H C1=C(C=CC(=C1)Br)C2=NN=C(C3=CC=C(C=C3)I)S2 N=1N=C(SC1C2=CC=C(C=C2)Br)C3=CC=C(C=C3)I |(313.19,-42.8,;301.68,-42.8,;298.12,-53.75,;307.43,-60.51,;316.74,-53.75,;327.65,-57.29,;330.04,-68.55,;340.99,-72.1,;349.54,-64.4,;347.15,-53.15,;336.2,-49.59,;360.45,-67.95,;287.21,-57.29,;278.66,-49.59,;267.72,-53.15,;265.32,-64.4,;273.88,-72.1,;284.82,-68.55,;254.42,-67.95,)| AuxInfo=1/0/N:13,17,8,12,14,16,9,11,7,6,15,10,5,3,19,18,1,2,4/E:(1,2)(3,4)(5,6)(7,8)/rA:19nNNCSCCCCCCCCCCCCCIBr/rB:s1;d2;s3;d1s4;s3;s5;d6;s8;d9;s10;s6d11;d7;s13;d14;s15;s7d16;s10;s15;/rC:313,1865,-42,8014,0;301,6779,-42,8014,0;298,1215,-53,7468,0;307,4322,-60,5114,0;316,7429,-53,7468,0;287,2141,-57,2908,0;327,6503,-57,2908,0;278,6615,-49,5900,0;267,7161,-53,1464,0;265,3233,-64,4035,0;273,8759,-72,1044,0;284,8213,-68,5480,0;330,0431,-68,5480,0;340,9885,-72,1044,0;349,5411,-64,4035,0;347,1483,-53,1464,0;336,2029,-49,5900,0;254,4159,-67,9476,0;360,4485,-67,9476,0; C14H8BrIN2S CDK 04252619202D 0 0 0 0 0 999 V3000 M V30 BEGIN CTAB M V30 COUNTS 19 21 0 0 0 M V30 BEGIN ATOM M V30 1 N 313.18652 -42.80139 0 0 M V30 2 N 301.67786 -42.80139 0 0 M V30 3 C 298.12152 -53.74678 0 0 M V30 4 S 307.43219 -60.5114 0 0 M V30 5 C 316.74289 -53.74678 0 0 M V30 6 C 287.21408 -57.2908 0 0 M V30 7 C 327.65033 -57.2908 0 0 M V30 8 C 278.6615 -49.59 0 0 M V30 9 C 267.71609 -53.14639 0 0 M V30 10 C 265.3233 -64.40355 0 0 M V30 11 C 273.87592 -72.10437 0 0 M V30 12 C 284.82129 -68.54799 0 0 M V30 13 C 330.04309 -68.54799 0 0 M V30 14 C 340.98849 -72.10437 0 0 M V30 15 C 349.54108 -64.40355 0 0 M V30 16 C 347.14832 -53.14639 0 0 M V30 17 C 336.20291 -49.59 0 0 M V30 18 I 254.41592 -67.9476 0 0 M V30 19 Br 360.44849 -67.9476 0 0 M V30 END ATOM M V30 BEGIN BOND M V30 1 1 1 2 M V30 2 2 2 3 M V30 3 1 3 4 M V30 4 1 4 5 M V30 5 2 5 1 M V30 6 1 3 6 M V30 7 1 5 7 M V30 8 2 6 8 M V30 9 1 8 9 M V30 10 2 9 10 M V30 11 1 10 11 M V30 12 2 11 12 M V30 13 1 12 6 M V30 14 2 7 13 M V30 15 1 13 14 M V30 16 2 14 15 M V30 17 1 15 16 M V30 18 2 16 17 M V30 19 1 17 7 M V30 20 1 10 18 M V30 21 1 15 19 M V30 END BOND M V30 END CTAB M END Synthetic procedures and analytical results for compounds 1b – e , 2a – g , 3b – e , 5a – e and 6a – e . We are grateful to the Bundesministerium für Bildung und Forschung (BMBF) and the Deutsche Forschungsgemeinschaft (DFG) for their financial support. We thank Prof. Herbert Meier, Annette Oehlhof and Dr. Norbert Hanold for the possibility to realize the FD MS and elemental analysis at the University of Mainz. We are especially grateful to Michael Bach and Prof. Jochen Gutmann for their support during X-ray measurements at the Max Planck Institute for Polymer Research in Mainz. Handbook of Liquid Crystals The director is a direction to which certain molecular axes point preferentially (in conventional nematic liquid crystals these are the molecular long axes). Handbook of Liquid Crystals Phys. Rev. Lett. Thin Solid Films Phys. Rev. Lett. Mol. Cryst. Liq. Cryst. Pramana Phys. Rev. Lett. Phys. Rev. Lett. EPL Eur. Phys. J. E Appl. Phys. Lett. J. Appl. Phys. Phys. Rev. E Phys. Rev. Lett. Phys. Rev. Lett. J. Am. Chem. Soc. Chem. Phys. Lett. Phys. Rev. E J. Appl. Phys. J. Appl. Phys. Mol. Cryst. Liq. Cryst. J. Mater. Chem. J. Mater. Chem. Chem. Commun. J. Mater. Chem. Liq. Cryst. Handbook of Liquid Crystals J. Am. Chem. Soc. And references therein In general, the molecular long axes are aligned with the magnetic field, however, domains may be isotropically distributed around the magnetic field vector. A similar X-ray diffraction pattern has been observed for cinnamic acid derivatives Mol. Cryst. Liq. Cryst. Introduction to X-ray Powder Diffractometry Nachr. Ges. Wiss. Goettingen, Math.-Phys. Kl. J. Chem. Phys. Adv. Funct. Mater. J. Appl. Crystallogr. This is an Open Access article under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The license is subject to the Beilstein Journal of Organic Chemistry terms and conditions: (http://www.beilstein-journals.org/bjoc)