Carbonylative synthesis and functionalization of indoles

• Alex De Salvo,
• Raffaella Mancuso and
• Xiao-Feng Wu

Beilstein J. Org. Chem. 2024, 20, 973–1000, doi:10.3762/bjoc.20.87

• carbon monoxide insertion, and Suzuki–Miyaura coupling reaction, from 2-gem-dibromovinylaniline [12]. In the presence of Pd(PPh3)4 (5 mol %) as catalyst, 5 equivalents of base (K2CO3), an aryl- or heteroarylboronic ester (1.1 equivalents), CO (12 bar), in dioxane at 100 °C after 16 h the indole

Synthesis and properties of 6-alkynyl-5-aryluracils

• Ruben Manuel Figueira de Abreu,
• Till Brockmann,
• Alexander Villinger,
• Peter Ehlers and
• Peter Langer

Beilstein J. Org. Chem. 2024, 20, 898–911, doi:10.3762/bjoc.20.80

• Abstract The development of a new and straightforward chemoselective method for the synthesis of uracil-based structures by combining Suzuki–Miyaura and Sonogashira–Hagihara cross-coupling is reported. The methodology was applied to synthesize a series of novel compounds. The tolerance of the combination

• this work, we report a new chemoselective method for the synthesis of a series of hitherto unknown uracil-based compounds by combining Suzuki–Miyaura and Sonogashira–Hagihara cross-coupling [60][61]. The method is designed to be flexible and could also be used to synthesize other structural motifs

• obtained. Compounds 3a–j were subsequently transformed to 5a–t by Suzuki–Miyaura cross-coupling. The bromination of 1 was performed by using Br2 (1 equiv), Ac2O (1.5 equiv), AcOH (25 °C, 1 h) and yielded the desired product in 52% [62]. With the starting material in hand, initial Sonogashira–Hagihara cross

Three-component N-alkenylation of azoles with alkynes and iodine(III) electrophile: synthesis of multisubstituted N-vinylazoles

• Jun Kikuchi,
• Roi Nakajima and
• Naohiko Yoshikai

Beilstein J. Org. Chem. 2024, 20, 891–897, doi:10.3762/bjoc.20.79

• Suzuki–Miyaura and Sonogashira couplings on 4aa or 4ba afforded the desired products 5 and 6 in 47% and 74% yields, respectively. In the former case, the C–Br bond on the pyrazole moiety remained intact, highlighting the superior leaving group ability of the BX group. Cu-catalyzed Ullmann coupling

Synthesis of π-conjugated polycyclic compounds by late-stage extrusion of chalcogen fragments

• Aissam Okba,
• Pablo Simón Marqués,
• Kyohei Matsuo,
• Naoki Aratani,
• Hiroko Yamada,
• Gwénaël Rapenne and
• Claire Kammerer

Beilstein J. Org. Chem. 2024, 20, 287–305, doi:10.3762/bjoc.20.30

• corresponding boronic acid 9 and a Suzuki–Miyaura cross-coupling between 8 and 9 gave rise to dimer 10, followed by the oxidation of both acenaphthene units into 1,8-naphthalic anhydrides. Installation of the thiepine ring was achieved by a double nucleophilic aromatic substitution induced by sodium sulfide

• corresponding bis(thiophenyl) thioether, which then underwent successive bromination and iodination to give intermediate 18. Next, a two-fold Suzuki–Miyaura cross-coupling occurring chemoselectively on the iodinated positions allowed the symmetric extension of the hydrocarbon scaffold, with the insertion of two

• thiepine via a two-fold Suzuki–Miyaura cross-coupling with 1,2-phenylenediboronic pinacol ester. The resulting S-doped extended tribenzothiepine 21 proved stable under ambient conditions for several months and exhibited good solubility in common organic solvents, which is ascribed to the boat-shape

Construction of hexabenzocoronene-based chiral nanographenes

• Ranran Li,
• Di Wang,
• Shengtao Li and
• Peng An

Beilstein J. Org. Chem. 2023, 19, 736–751, doi:10.3762/bjoc.19.54

• ]azepine and tetrabromothiophene-S,S-dioxide, followed by oxidative aromatization in the presence DDQ to afford compound 25 in an overall 75% yield. Suzuki−Miyaura cross-coupling reaction of compound 25 with (4-ethylphenyl)boronic acid in the presence of Pd(CH3CN)2Cl2, SPhos, and K3PO4 then furnished the

• benzo[b]naphtho[2,3-f]oxepine 66 with tetrabromothiophene-S,S-dioxide in toluene followed by oxidative aromatization in the presence of DDQ afforded tetrabrominated aromatics 67 in an 81% yield. Subsequently, fourfold Suzuki–Miyaura cross-coupling of polybrominated compound 67 was performed, affording

• nanographenes 96 and 100 using helicene or oxa-helicene as the linkers, respectively [56]. The first π-extension started from the borylated penta-tert-butyl HBC 92. The chemical selective Suzuki−Miyaura cross-coupling reaction between 92 and 93 followed by Scholl oxidation produced compound 94 in an overall 50

Total synthesis of insect sex pheromones: recent improvements based on iron-mediated cross-coupling chemistry

• Eric Gayon,
• Guillaume Lefèvre,
• Olivier Guerret,
• Adrien Tintar and
• Pablo Chourreu

Beilstein J. Org. Chem. 2023, 19, 158–166, doi:10.3762/bjoc.19.15

• reactions, which witnessed considerable development in the last two decades [14], several cross-coupling methodologies involving soft nucleophiles, such as iron-mediated Suzuki–Miyaura cross-couplings, being reported [15]. The introduction of alkyl–alkenyl linkage by means of iron-catalyzed cross-coupling

Combining the best of both worlds: radical-based divergent total synthesis

• Kyriaki Gennaiou,
• Antonios Kelesidis,
• Maria Kourgiantaki and
• Alexandros L. Zografos

Beilstein J. Org. Chem. 2023, 19, 1–26, doi:10.3762/bjoc.19.1

• –cyclization of common synthetic intermediates 94 and 95 (Scheme 8). Compound 94 was obtained in three steps, with the key step being the Suzuki–Miyaura coupling of appropriately functionalized precursors 91 and 92 using Romo and co-worker’s protocol [52]. Reaction of 94 under PPTS acidic conditions initiated

Inline purification in continuous flow synthesis – opportunities and challenges

• Jorge García-Lacuna and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 1720–1740, doi:10.3762/bjoc.18.182

• obtain the pure compound that met the requirements (>99.5%) [41]. Another very recent report which couples a Suzuki–Miyaura reaction with inline purification, uses capture-SMB technology as its purification approach [42] (Table 2, entry 2). The crude material is directed into two twin C-18 columns that

• reported by Pitts and collaborators. This study achieves full removal of metal species after common homogenous catalytic reactions such as a Suzuki–Miyaura reaction, Sonogashira reaction or hydrogenation mediated by Wilkinson’s catalyst [84]. Other interesting examples to remove transition metals in

• successfully coupled to a Suzuki–Miyaura reaction [119]. Crystallization was identified as a suitable purification technique to separate products from unreacted starting materials while avoiding metal contamination. Water was used as antisolvent and two mixing units were needed in the crystallization process

Simple synthesis of multi-halogenated alkenes from 2-bromo-2-chloro-1,1,1-trifluoroethane (halothane)

• Yukiko Karuo,
• Atsushi Tarui,
• Kazuyuki Sato,
• Kentaro Kawai and
• Masaaki Omote

Beilstein J. Org. Chem. 2022, 18, 1567–1574, doi:10.3762/bjoc.18.167

• presence of KOH. In this reaction, halothane plays a key role in the construction of highly halogenated and structurally intriguing products. The tri-halogenated alkenyl ether has potential applications in organic chemistry, e.g., in Suzuki–Miyaura or Sonogashira cross-coupling reactions. Further

Introducing a new 7-ring fused diindenone-dithieno[3,2-b:2',3'-d]thiophene unit as a promising component for organic semiconductor materials

• Valentin H. K. Fell,
• Joseph Cameron,
• Alexander L. Kanibolotsky,
• Eman J. Hussien and
• Peter J. Skabara

Beilstein J. Org. Chem. 2022, 18, 944–955, doi:10.3762/bjoc.18.94

• [34], dibromodithienothiophene 24 is lithiated with n-butyllithium at −90 °C, and the resulting species is reacted in situ with triisopropyl borate. After aqueous workup, dithieno[3,2-b:2’,3’-d]thiophene-2,6-diylboronic acid (25) is obtained, enabling subsequent Suzuki–Miyaura cross-coupling [36

• previously by other groups [38][39], however, we here use a different protocol. Intermediates 25 or 26 were reacted in Suzuki–Miyaura couplings [36] with commercially available methyl 5-bromo-2-iodobenzoate [40], to obtain the key intermediate dimethyl 6,6’-(dithieno[3,2-b:2’,3’-d]thiophene-2,6-diyl)bis(3

• Information File 1. According to the literature [41], Aliquat 336® can be added to Suzuki–Miyaura reactions. Here, this did not improve the yield, but decreased its fluctuation from batch to batch. After sufficient amounts of intermediate 27 were isolated, attempts for ring-closure were made. Initial attempts

Palladium-catalyzed solid-state borylation of aryl halides using mechanochemistry

• Koji Kubota,
• Emiru Baba,
• Tamae Seo,
• Tatsuo Ishiyama and
• Hajime Ito

Beilstein J. Org. Chem. 2022, 18, 855–862, doi:10.3762/bjoc.18.86

• organic materials, typically through Suzuki–Miyaura coupling [1][2][3][4][5][6][7]. The palladium-catalyzed boryl substitution of aryl halides with boron reagents, termed Miyaura–Ishiyama borylation, is an efficient method for synthesizing arylboronates with high functional group compatibility [8][9][10

• transformations. Thus far, mechanochemical palladium-catalyzed cross-coupling reactions such as Suzuki–Miyaura [34][35][36][37][38][39][40][41][42][43][44][45][46][47], Buchwald–Hartwig [48][49][50][51][52], Sonogashira [53][54][55][56], Negishi [57], Mizoroki–Heck [58][59][60], and C–S bond-forming [61

Inductive heating and flow chemistry – a perfect synergy of emerging enabling technologies

• Conrad Kuhwald,
• Sibel Türkhan and
• Andreas Kirschning

Beilstein J. Org. Chem. 2022, 18, 688–706, doi:10.3762/bjoc.18.70

• flow conditions. In these reactions, the leaching of palladium was as low as 34 ppm for Suzuki–Miyaura reactions and 100 ppm for Heck reactions. Importantly, the functionalized nanoparticles could be reused several times without observing a decrease in catalytic activity. 3.2.4 Multistep processes: The

Borylated norbornadiene derivatives: Synthesis and application in Pd-catalyzed Suzuki–Miyaura coupling reactions

• Robin Schulte and
• Heiko Ihmels

Beilstein J. Org. Chem. 2022, 18, 368–373, doi:10.3762/bjoc.18.41

• -dioxaborolane was prepared and shown to be a suitable substrate for Pd-catalyzed Suzuki–Miyaura coupling reactions with selected haloarenes. It was demonstrated exemplarily that the novel monosubstituted 2-(1-naphthyl)norbornadiene, that is accessible through this route, is transformed to the corresponding

• derivatives may be metalated in a Li–halogen exchange reaction [27]. In another versatile approach, arylation and alkenylation reactions of the norbornadiene may be accomplished with a Suzuki–Miyaura coupling reaction. In this case, halogenated norbornadienes react with arylboronic acids or their esters to

• the corresponding aryl-substituted norbornadienes under optimized conditions [28][29][30][31]. To the best of our knowledge, however, no borylated norbornadiene derivatives have been employed in Suzuki–Miyaura coupling reactions so far, although this synthetic route appears to be a useful

Peptide stapling by late-stage Suzuki–Miyaura cross-coupling

• Hendrik Gruß,
• Rebecca C. Feiner,
• Ridhiwan Mseya,
• David C. Schröder,
• Michał Jewgiński,
• Kristian M. Müller,
• Rafał Latajka,
• Antoine Marion and
• Norbert Sewald

Beilstein J. Org. Chem. 2022, 18, 1–12, doi:10.3762/bjoc.18.1

• ]. Additionally, halotryptophans were incorporated in pentapeptides as building blocks for macrocyclisation by Suzuki–Miyaura cross-coupling (SMC) aiming at the preparation of bicyclic peptides [71]. Recently, intramolecular SMC has been successfully applied to side chain-to-tail cyclisation between

• stapling techniques to stabilise α-helical secondary structure motifs of peptides led to the design of modulators of protein–protein interactions, which had been considered undruggable for a long time. We disclose a novel approach towards peptide stapling utilising macrocyclisation by late-stage Suzuki

• –Miyaura cross-coupling of bromotryptophan-containing peptides of the catenin-binding domain of axin. Optimisation of the linker length in order to find a compromise between both sufficient linker rigidity and flexibility resulted in a peptide with an increased α-helicity and enhanced binding affinity to

Ligand-dependent stereoselective Suzuki–Miyaura cross-coupling reactions of β-enamido triflates

• Tomáš Chvojka,
• Athanasios Markos,
• Svatava Voltrová,
• Radek Pohl and
• Petr Beier

Beilstein J. Org. Chem. 2021, 17, 2657–2662, doi:10.3762/bjoc.17.179

• 43 Prague 2, Czech Republic 10.3762/bjoc.17.179 Abstract The stereoselective Suzuki–Miyaura cross-coupling of (Z)-β-enamido triflates is demonstrated. Depending on the nature of the ligand in the palladium catalyst, either retention or inversion of the configuration during the synthesis of β,β

• -diaryl-substituted enamides is observed. Thus, the method provides synthetic access to both isomers of the target enamides from (Z)-β-enamido triflates. Keywords: enamides; isomerization; Suzuki–Miyaura coupling; vinyl triflates; Introduction Enamides are substrates of high value in organic synthesis

Silica gel and microwave-promoted synthesis of dihydropyrrolizines and tetrahydroindolizines from enaminones

• Robin Klintworth,
• Garreth L. Morgans,
• Stefania M. Scalzullo,
• Charles B. de Koning,
• Willem A. L. van Otterlo and
• Joseph P. Michael

Beilstein J. Org. Chem. 2021, 17, 2543–2552, doi:10.3762/bjoc.17.170

• the unsubstituted pyrrole position (Scheme 5). This site was readily brominated with N-bromosuccinimide in N,N-dimethylformamide [71] to afford ethyl 7-bromo-6-phenyl-2,3-dihydro-1H-pyrrolizine-5-carboxylate (28) in 83% yield. Palladium(0)-catalyzed Suzuki–Miyaura coupling of 28 with phenylboronic

Synthesis and investigation on optical and electrochemical properties of 2,4-diaryl-9-chloro-5,6,7,8-tetrahydroacridines

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 2450–2461, doi:10.3762/bjoc.17.162

• /bjoc.17.162 Abstract A facile synthesis of 2,4-diaryl-9-chloro-5,6,7,8-tetrahydroacridine derivatives is reported which is based on POCl3-mediated cyclodehydration followed by double Suzuki–Miyaura cross-coupling. The absorption and fluorescence properties of the obtained products were investigated and

• 3,5-dibromoanthranilic acid (1) [61] with cyclohexanone in POCl3 through an adapted reported procedure [62] (Scheme 1). With precursor 2 in hand, we intended to expand the π-conjugation of the tetrahydroacridine core by adding diversely substituted aryl groups using the Suzuki–Miyaura cross-coupling

• to 91% yield. The trifold Suzuki–Miyaura coupling product, i.e., 2,4,9-triphenyl-5,6,7,8-tetrahydroacridine, could not be prepared, even after increasing the amount of phenylboronic acid to 4 equivalents and prolonging the reaction time. Our primary screening consisted in evaluating the effect of the

Synthesis of phenanthridines via a novel photochemically-mediated cyclization and application to the synthesis of triphaeridine

• Songeziwe Ntsimango,
• Kennedy J. Ngwira,
• Moira L. Bode and
• Charles B. de Koning

Beilstein J. Org. Chem. 2021, 17, 2340–2347, doi:10.3762/bjoc.17.152

• was demonstrated to be useful for the synthesis of the natural product trisphaeridine (3) [17]. Exposure of 1-bromo-2,4,5-trimethoxybenzene (19) to Suzuki–Miyaura coupling reaction conditions with boronic acid 20 resulted in the formation of aldehyde 21 (Scheme 5). Treatment of 21 with hydroxylamine

• substituents in a range of positions. In all cases at least one methoxy substituent was positioned ortho- to the biaryl axis. The other aromatic ring had to contain an oxime ester, which would form an iminyl electron donor, as shown in Scheme 2. As illustrated substrates 13a–f were accessed using the Suzuki

• –Miyaura cross-coupling reaction of a variety of halogenated methoxybenzene-containing compounds with 2-(formylphenyl)boronic acids in generally good yields [15]. As a next step, the biaryl aldehydes 13a–f were converted into their corresponding oximes 14a–f in good yields as a mixture of (E) and (Z

Photoredox catalysis in nickel-catalyzed C–H functionalization

• Lusina Mantry,
• Rajaram Maayuri,
• Vikash Kumar and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2021, 17, 2209–2259, doi:10.3762/bjoc.17.143

• a reliable strategy in modern organic synthesis. Palladium-catalyzed cross-coupling reactions such as Mizoroki–Heck [5][6][7][8], Suzuki–Miyaura [9][10][11], Buchwald–Hartwig [12][13], Negishi [14][15], Migita–Stille [16], Sonogashira [17], among others [18][19][20], significantly changed the design

Chemical syntheses and salient features of azulene-containing homo- and copolymers

• Vijayendra S. Shetti

Beilstein J. Org. Chem. 2021, 17, 2164–2185, doi:10.3762/bjoc.17.139

• synthesized from tropolone (21) in five steps (Scheme 21A). The Suzuki–Miyaura coupling reaction of 2,6-dibromoazulene (125) with 2,2’-(9,9-dioctyl-9H-flourene-2,7-diyl)di(1,3,2-dioxaborolane) (103) furnished the polymer 126 in 31% yield (Scheme 21B). The other polymer 129 was obtained from 2,6-dibromoazulene

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• ). Representative examples included indenoanthracenes 61a–c, bearing aryl groups linked to the alkyne, and indenoanthracenes 61d–f, containing tetramethylsilane groups at the terminal alkyne [46]. From commercially available 1,8-dichloroanthraquinone (62) and by using modified Suzuki–Miyaura coupling reaction

• conditions, Agarwal et al. synthesized a series of 1,8-diarylanthracene derivatives 64 in two steps (Scheme 14) [47]. First, the simple reduction of anthraquinone 62 employing the well-known reductive Zn/NH3 system and HCl provided 1,8-dichloroanthracene (63). A Suzuki–Miyaura coupling reaction in the

• published in 2018, de Koning and co-workers reported a new methodology to synthesize the benzo[a]anthracene skeleton of angucycline derivatives 146 by using a multistep strategy based on Suzuki–Miyaura, isomerization, and ring-closing metathesis reactions (Scheme 33) [67]. The commercially available 2

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• 134 were used as starting material in the Sonogashira and Suzuki reactions. The Sonogashira−Hagihara cross-coupling led to alkynylation at position 5 of the triazole ring in the presence of CuI and Pd(PPh3)4 as catalytic system as well as K3PO4 as base in THF as solvent at 65 °C. However, the Suzuki

• −Miyaura cross-coupling produced a series of 5-aryl-4-ethynyl triazoles 136 in the presence of Pd(PPh3)4 as catalyst and K3PO4 as base in 1,4-dioxane as solvent at 100 °C (Scheme 39) [62]. A paper by Sekar et al. described the synthesis of polycyclic triazoles 142 through a domino alkyne insertion and C–H

Double-headed nucleosides: Synthesis and applications

• Vineet Verma,
• Jyotirmoy Maity,
• Vipin K. Maikhuri,
• Ritika Sharma,
• Himal K. Ganguly and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2021, 17, 1392–1439, doi:10.3762/bjoc.17.98

Design, synthesis and photophysical properties of novel star-shaped truxene-based heterocycles utilizing ring-closing metathesis, Clauson–Kaas, Van Leusen and Ullmann-type reactions as key tools

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2021, 17, 1374–1384, doi:10.3762/bjoc.17.96

• be inspected from Scheme 7, our journey in this regard stem from the iodination of 2 using H5IO6/I2/H2SO4 in acetic acid–water solvent system to afford the desired triiodotruxene derivative 22 in 50% yield. Furthermore, Suzuki–Miyaura cross-coupling reaction of 22 with 4-formylphenylboronic acid (23

Synthetic accesses to biguanide compounds

• Oleksandr Grytsai,
• Cyril Ronco and
• Rachid Benhida

Beilstein J. Org. Chem. 2021, 17, 1001–1040, doi:10.3762/bjoc.17.82

• catalysts in various organic reactions [1] such as the Ullmann coupling, Suzuki coupling, Suzuki–Miyaura coupling, and the Heck reaction. Aside from being useful synthetic agents, biguanides gained particular interest from the perspective of medicinal chemistry. For the first time, the biological activity