Green and sustainable approaches for the Friedel–Crafts reaction between aldehydes and indoles

• Periklis X. Kolagkis,
• Eirini M. Galathri and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2024, 20, 379–426, doi:10.3762/bjoc.20.36

• counterparts, due to their recyclability, ease of handling, and low cost [40]. Carbon-based solid acid catalysts especially are an interesting catalyst class, because they display low corrosiveness, toxicity, and higher catalytic activity, while also being insoluble in most organic solvents. The large amount

• 100 nm, exhibit various benefits, such as tailoring the scaffold of the catalyst, the recyclability of the nanocompounds, as well as the elevated catalytic activity offered. These benefits stem from their high surface area, that provides more active sites for the reactants to absorb into and collide

• facile recyclability, with the silica layer preventing the Fe3O4 from aggregation. The LPMNPs managed to provide impressive yields, while employing an amount of 2.5 mol % in water, with the help of conventional heating at 50 °C, which facilitated the organocatalytic process that required 1 to 1.5 hours

A novel recyclable organocatalyst for the gram-scale enantioselective synthesis of (S)-baclofen

• Gyula Dargó,
• Dóra Erdélyi,
• Balázs Molnár,
• Péter Kisszékelyi,
• Zsófia Garádi and
• József Kupai

Beilstein J. Org. Chem. 2023, 19, 1811–1824, doi:10.3762/bjoc.19.133

• cinchona squaramide organocatalyst. Its catalytic activity and recyclability were examined in a new stereoselective synthesis of baclofen, which is used to treat muscle spasms [30]. Finally, the catalyst was easily recycled by centrifugation over five reaction cycles without significant loss of activity

• the 1 mol % catalyst loading. Gram-scale synthesis of baclofen Finally, we planned to demonstrate the recyclability of our lipophilic organocatalyst 2 in the gram-scale synthesis of baclofen precursor (S)-17. The catalyst loading was set to 1 mol % to reduce the needed catalyst amount and the reaction

Synthesis of 5-arylidenerhodanines in L-proline-based deep eutectic solvent

• Stéphanie Hesse

Beilstein J. Org. Chem. 2023, 19, 1537–1544, doi:10.3762/bjoc.19.110

• promising emerging class of green solvents as they offer numerous advantages, such as low volatility, non-flammability, chemical and thermal stability, recyclability, and above all a good biodegradability [10]. Moreover, their synthesis is usually easy and cheap as DES are formed by simply mixing an H-bond

N-Sulfenylsuccinimide/phthalimide: an alternative sulfenylating reagent in organic transformations

• Fatemeh Doraghi,
• Seyedeh Pegah Aledavoud,
• Mehdi Ghanbarlou,
• Bagher Larijani and
• Mohammad Mahdavi

Beilstein J. Org. Chem. 2023, 19, 1471–1502, doi:10.3762/bjoc.19.106

• ) [44]. Among different Lewis acid catalysts, such as Cu(OTf)2, Mg(OTf)2, Zn(OTf)2, Sc(OTf)3, Eu(OTf)3, and Yb(OTf)3, it was found that Sc(OTf)3 gave higher product yield. In addition, the combination of Sc(OTf)3/ILs displayed good recyclability in this transformation. In 2014, Anbarasan and Saravanan

Clauson–Kaas pyrrole synthesis using diverse catalysts: a transition from conventional to greener approach

• Dileep Kumar Singh and
• Rajesh Kumar

Beilstein J. Org. Chem. 2023, 19, 928–955, doi:10.3762/bjoc.19.71

• different areas of chemistry. Various pyrrole containing molecules. A tree-diagram showing various conventional and green protocols for Clauson-Kaas pyrrole synthesis. Reusability of catalyst γ-Fe2O3@SiO2-Sb-IL in six cycles. Recyclability of β-cyclodextrin-SO3H. Plausible mechanism for the formation of N

A new oxidatively stable ligand for the chiral functionalization of amino acids in Ni(II)–Schiff base complexes

• Alena V. Dmitrieva,
• Oleg A. Levitskiy,
• Yuri K. Grishin and
• Tatiana V. Magdesieva

Beilstein J. Org. Chem. 2023, 19, 566–574, doi:10.3762/bjoc.19.41

• -stereocenter [32]; a significant downfield shift of this signal (up to 0.5 ppm) could be expected for the diastereomer with the ᴅ-α-stereocenter with respect to the ʟ-isomer. To prove the recyclability of the t-Bu-containing (S)-N-benzylproline-derived ligand L7, the ʟ-(pMeCysNi)L7 complex was decomposed by

Inline purification in continuous flow synthesis – opportunities and challenges

• Jorge García-Lacuna and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 1720–1740, doi:10.3762/bjoc.18.182

• products that can be purified by SiO2 column chromatography, other noteworthy advantages are the possibility of isolating side products that may aid in mechanistic studies, and the recyclability and robustness of the SiO2 columns. One of the main issues that can be found with this purification technique is

Redox-active molecules as organocatalysts for selective oxidative transformations – an unperceived organocatalysis field

• Elena R. Lopat’eva,
• Igor B. Krylov,
• Dmitry A. Lapshin and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2022, 18, 1672–1695, doi:10.3762/bjoc.18.179

• under visible light irradiation. The advantages of this mixed hetero-/homogeneous catalytic system include the easy separation of the products from NHPI and TiO2, recyclability, selectivity control by TiO2/NHPI ratio, and high efficiency at low TiO2 loading due to the radical chain nature of the

An alternative C–P cross-coupling route for the synthesis of novel V-shaped aryldiphosphonic acids

• Stephen J. I. Shearan,
• Enrico Andreoli and
• Marco Taddei

Beilstein J. Org. Chem. 2022, 18, 1518–1523, doi:10.3762/bjoc.18.160

• flask at the end is simply unreacted phosphite, which would ideally need to be investigated to assess its recyclability, and lead to a process with greener attributes. In this sense, the phosphite is likely to be the last product coming over via distillation, and should be relatively pure, but further

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• (Scheme 21). The product yield was significantly lower only by decreasing the reaction temperature. The amino groups present on the POP backbone enable a suitable electronic surrounding of the cobalt species which promotes the reaction. The catalyst showed excellent recyclability for 8 successive runs

Green synthesis of C5–C6-unsubstituted 1,4-DHP scaffolds using an efficient Ni–chitosan nanocatalyst under ultrasonic conditions

• Soumyadip Basu,
• Sauvik Chatterjee,
• Suman Ray,
• Suvendu Maity,
• Prasanta Ghosh,
• Asim Bhaumik and
• Chhanda Mukhopadhyay

Beilstein J. Org. Chem. 2022, 18, 133–142, doi:10.3762/bjoc.18.14

• . In contrast, our work unites various aspects of green chemistry, such as a minimal reaction time, a high conversion rate, a green solvent, environmentally friendly reaction conditions, and an effortless separation and recyclability of the catalyst. Altogether, the detailed summary in Table 3

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

• ), column robustness/ease of recyclability and the facile nature of reaction condition and substrate screening. To increase the greenness and reduce the consumption of the catalyst, Yamamoto and Nakashima have recently developed a proline tetrazole 51 packed-bed reactor system, exploiting the low solubility

Heterogeneous photocatalytic cyanomethylarylation of alkenes with acetonitrile: synthesis of diverse nitrogenous heterocyclic compounds

• Guanglong Pan,
• Qian Yang,
• Wentao Wang,
• Yurong Tang and
• Yunfei Cai

Beilstein J. Org. Chem. 2021, 17, 1171–1180, doi:10.3762/bjoc.17.89

• given its low cost, recyclability, and high chemical/thermal stability [37][38][39]. Meanwhile, CN-K has a band gap of 2.72 eV with suitable valence band and conduction band potentials, which allows its promising use in organic synthesis for oxidation and reduction of various substrates [40][41][42][43

• recyclability, broad substrate scope, and high functional group tolerance (Scheme 1). Results and Discussion Our initial investigation focused on the CN-K photocatalyzed cascade alkyl radical addition/cyclization reaction of the N-arylallylamine 1a with tert-butyl N-hydroxyphthalimide (NHPI) ester (2a), a

Nitroalkene reduction in deep eutectic solvents promoted by BH₃NH₃

• Chiara Faverio,
• Monica Fiorenza Boselli,
• Patricia Camarero Gonzalez,
• Alessandra Puglisi and
• Maurizio Benaglia

Beilstein J. Org. Chem. 2021, 17, 1041–1047, doi:10.3762/bjoc.17.83

• reproducible protocol to isolate the product without the use of any organic solvent was established, and the recyclability of the DES mixture was successfully investigated. Keywords: alternative solvents; atom economy; DES; nitro derivatives; reduction; Introduction The search for alternative solvents, not

• report the results of our explorative studies, aimed to develop a chemoselective nitroalkene reduction in DESs, with the goals to establish a reliable and reproducible protocol to isolate the product without the use of any organic solvent and to assess the recovery and the recyclability of the DES

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

Tuning the solid-state emission of liquid crystalline nitro-cyanostilbene by halogen bonding

• Subrata Nath,
• Alexander Kappelt,
• Matthias Spengler,
• Bibhisan Roy,
• Jens Voskuhl and
• Michael Giese

Beilstein J. Org. Chem. 2021, 17, 124–131, doi:10.3762/bjoc.17.13

• interactions, which allow for dynamic responses to external stimuli [1]. In addition, the self-assembly of the complementary molecular entities provides an easy access to functional systems and enables recyclability and self-healing properties of the materials [2]. With respect to the formation of

A novel and robust heterogeneous Cu catalyst using modified lignosulfonate as support for the synthesis of nitrogen-containing heterocycles

• Bingbing Lai,
• Meng Ye,
• Ping Liu,
• Minghao Li,
• Rongxian Bai and
• Yanlong Gu

Beilstein J. Org. Chem. 2020, 16, 2888–2902, doi:10.3762/bjoc.16.238

• to the fast deactivation of catalysts, which consequently impair the recyclability of the catalysts [8][9][10][11]. Therefore, special efforts should be paid to enhancing the robustness of heterogeneous metal catalysts. Sodium lignosulphonate (LS) is a waste from the paper-making industry, containing

• recyclability. However, the stability and durability of LS was very limited especially in polar solvents such as H2O, EtOH and at harsh conditions. In a further study of our previous work [15], a LS/dicationic ionic liquid composite was prepared via an ion exchange process, and then used as catalyst support for

• , which may be ascribed to the low loading capacity of Cu species (Table 6, entry 1 vs entries 2 and 3). In addition, by increasing the amount of catalyst, the yields could reach the ideal level (Table 6, entries 4 and 5). The recyclability of LS-FAS-Cu was investigated based on the three-component

One-pot multicomponent green Hantzsch synthesis of 1,2-dihydropyridine derivatives with antiproliferative activity

• Giovanna Bosica,
• Kaylie Demanuele,
• José M. Padrón and
• Adrián Puerta

Beilstein J. Org. Chem. 2020, 16, 2862–2869, doi:10.3762/bjoc.16.235

• reported by Cao and collaborators [19]. Catalyst characterization and recyclability The catalyst was analyzed by X-ray fluorescence (XRF) spectroscopy in order to ascertain the PW/Al2O3-support ratio. The mass percentage ratio of tungsten, which is the main component of the catalyst, and aluminium, the

Synergy between supported ionic liquid-like phases and immobilized palladium N-heterocyclic carbene–phosphine complexes for the Negishi reaction under flow conditions

• Edgar Peris,
• Raúl Porcar,
• María Macia,
• Jesús Alcázar,
• Eduardo García-Verdugo and
• Santiago V. Luis

Beilstein J. Org. Chem. 2020, 16, 1924–1935, doi:10.3762/bjoc.16.159

• -like phases (SILLPs) [33][34][35][36][37][38]. In these systems, the microenvironment provided by the ionic liquid-like units can have a remarkable influence on the overall process, particularly on the catalytic activity and recyclability of the supported species. Indeed, the appropriate design of the

• (Figure 6b). Under these conditions, the catalytic system was less active, but the leaching was reduced even further reaching a value of 0.04 ppm. The recyclability of the systems was also tested. In general, the catalysts assayed maintained the catalytic activity as far as an additional amount of RuPhos

• used for their preparation and this significantly affects its activity but also their recyclability [35][39]. The capacity to generate active catalytic species from the MNPs is essential in the first run, but the capacity of the system, including imidazolium fragments and remaining MNPs, to efficiently

One-pot synthesis of isosorbide from cellulose or lignocellulosic biomass: a challenge?

• Isaline Bonnin,
• Raphaël Mereau,
• Thierry Tassaing and
• Karine De Oliveira Vigier

Beilstein J. Org. Chem. 2020, 16, 1713–1721, doi:10.3762/bjoc.16.143

•  3). Optimal reaction conditions for the first step are middle temperatures to enhance the recyclability of Ru/C catalyst. 59% of sorbitol was obtained at 170 °C with 0.5 M of H2SO4, 20 bar of H2 for 2 h and in the presence of 0.02 mmol of Ru. The second step was performed starting from the first

• activity and recyclability of the catalyst was improved. A modification of the Ru/C hydrogenation catalyst’s surface by sulfonation and oxidative treatment was performed and had a significant effect on the catalyst properties in the isosorbide synthesis. Hence, strong acid sites are generated on the

• strong and medium acid site of NbOPO4-pH2 after its impregnation. The recyclability of NbOPO4-pH2 was performed for the two-step conversion of cellulose to isosorbide as the Ru/NbOPO4-pH2 recyclability was proved in a previous study in the conversion of cellulose to isosorbide [29]. A decrease of

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

• chemistry as previously discussed. This combines the ease of separation and recyclability of a heterogeneous catalyst, with the detailed characterisation, accessibility and synthetic versatility of a homogeneous photocatalyst. Some desirable properties of a solid support are hence; (i) a strong

Reaction of indoles with aromatic fluoromethyl ketones: an efficient synthesis of trifluoromethyl(indolyl)phenylmethanols using K₂CO₃/n-Bu₄PBr in water

• Thanigaimalai Pillaiyar,
• Masoud Sedaghati and
• Gregor Schnakenburg

Beilstein J. Org. Chem. 2020, 16, 778–790, doi:10.3762/bjoc.16.71

• advantages of this protocol. Keywords: C–C-bond formation; C3-funtionalization of indole; diindolylmethane; Friedel–Crafts reaction; indole; indole-3-carbinol; large-scale synthesis; recyclability; Introduction (1H-Indol-3-yl)methanols have emerged as versatile pre-electrophiles for C–C functionalization

• this reaction. The base-catalyzed reaction has a benefit because it may avoid the formation of diindolylmethane and biindoles as byproducts [28]. Although these methods were useful, they have limitations and drawbacks, which are the use of organic solvents [24], difficulties in recyclability of the

• indole (1b, 8.5 mmol) with 2a (9.4 mmol, Scheme 1). In both reactions, the desired products are achieved in excellent yields (3a: 2.14 g, 98%; 3b: 2.39 g, 96%). The recyclability of the catalytic system n-Bu4PBr/K2CO3 of this protocol was investigated in the preparation of 3a using 1a (3.40 mmol), 2a

A systematic review on silica-, carbon-, and magnetic materials-supported copper species as efficient heterogeneous nanocatalysts in “click” reactions

• Pezhman Shiri and
• Jasem Aboonajmi

Beilstein J. Org. Chem. 2020, 16, 551–586, doi:10.3762/bjoc.16.52

• , the desired triazole products were generated through the [3 + 2] cycloaddition of the azide and alkyne. The recyclability analysis of these IPSi-supported Cu(I) and Cu(II) catalysts indicated seven consecutive runs with almost equivalent performances. In 2018, silica modified with a benzimidazole

• proceeded well using a catalytic amount of the synthesized catalyst 58 in water at 70 °C to create 1,4-disubstituted 1,2,3-triazole products in good to high yields (Scheme 9). In terms of recyclability, there was a continuous decrease in the catalytic activity of 58 from the first to the second to the third

• 24 h to produce a precipitate that was gathered and washed with water and ethanol (Scheme 18). It should be noted that 5.0 mol % of the 3D graphene/Cu nanocomposite 87 were sufficient to generate a high yield of the desired products in EtOH/H2O (1:1) at 70 °C. To screen the recyclability of 87, the

Recent advances in photocatalyzed reactions using well-defined copper(I) complexes

• Mingbing Zhong,
• Xavier Pannecoucke,
• Philippe Jubault and
• Thomas Poisson

Beilstein J. Org. Chem. 2020, 16, 451–481, doi:10.3762/bjoc.16.42

• about the future availability of these metals at a reasonable cost. With regards to organic dyes, impressive developments have been achieved, but these catalysts might suffer from a low photochemical stability, and thus hampering their use and recyclability [7]. Therefore, alternative solutions have to

Oligomeric ricinoleic acid preparation promoted by an efficient and recoverable Brønsted acidic ionic liquid

• Fei You,
• Xing He,
• Song Gao,
• Hong-Ru Li and
• Liang-Nian He

Beilstein J. Org. Chem. 2020, 16, 351–361, doi:10.3762/bjoc.16.34

• recyclability and product separation. After decanting the upper product and washing the remaining IL with a small amount of dichloromethane, the weight of [HSO3-BDBU]H2PO4 was examined and then the fresh ricinoleic acid was added for the next cycle synthesis of oligomeric ricinoleic acid. The IL catalyst was