Scope and limitations of a DMF bio-alternative within Sonogashira cross-coupling and Cacchi-type annulation

  1. 1 ,
  2. 1 ,
  3. 2 ,
  4. 3 ,
  5. 1 and
  6. 1
1Department of Pure and Applied Chemistry, WestCHEM, University of Strathclyde, Thomas Graham Building, 295 Cathedral Street, Glasgow, G1 1XL, UK
2Sigma-Aldrich, The Old Brickyard, New Road, Gillingham, Dorset, SP8 4XT, UK
3School of Science and Technology, University of New England, Armidale, Australia, 2351
  1. Corresponding author email
Guest Editor: L. Vaccaro
Beilstein J. Org. Chem. 2016, 12, 2005–2011. https://doi.org/10.3762/bjoc.12.187
Received 18 Jul 2016, Accepted 22 Aug 2016, Published 08 Sep 2016
Full Research Paper
cc by logo

Abstract

Pd-catalysed C–C bond formation is an essential tool within the pharmaceutical and agrochemical industries. Many of these reactions rely heavily on polar aprotic solvents; however, despite their utility, these solvents are incompatible with the drive towards more sustainable chemical synthesis. Herein, we describe the scope and limitations of an alternative to DMF derived from renewable sources (CyreneTM) in Sonogashira cross-coupling and Cacchi-type annulations.

Introduction

The Sonogashira reaction [1,2] (Scheme 1) is a robust and broadly applicable Pd-catalysed bond-forming process that, alongside the Suzuki–Miyaura reaction [3], has steadily become an indispensible tool for C–C bond formation in the pharmaceutical industry [4]. While the Sonogashira reaction can be effectively carried out in a variety of media [1,2], in the general sense this process clearly relies upon the use of dipolar aprotic solvents, in particular DMF. Indeed, some 41% of all Sonogashira reactions reported using aryl iodides can be linked to the use of DMF as a solvent [5].

[1860-5397-12-187-i1]

Scheme 1: The Sonogashira reaction.

In this context, the sustainability movement within pharmaceutical research and development strives to substitute solvents that have regulatory and environmental issues for those with a lower perceived risk. Indeed, solvent replacement has been designated a key research area with numerous pharmaceutical companies detailing their efforts towards a more sustainable solvent selection as part of their overall sustainability programmes [6-23].

Based on its associated regulatory issues [24], it is perhaps no surprise that DMF continues to be a priority solvent for replacement. With legislation surrounding the use of DMF becoming increasingly stringent [24], numerous efforts have been made towards the use of alternative media in the Sonogashira reaction [25-30]. However, notwithstanding its issues, DMF is an excellent solvent for the Sonogashira reaction and its replacement frequently occurs at the expense of increased temperature (and therefore potentially substrate compatibility), reaction time, catalyst loading or the requirement for non-commercial/expensive catalysts, and yield [25-30]. Consequently, poor choice of solvent replacement can result in one of industry’s workhorse reactions becoming rather less predictable and robust.

In this regard, dihydrolevoglucosenone (Cyrene, Figure 1), accessed in two steps from cellulose [31,32], has been shown to possess similar physical properties to those of DMF and other dipolar aprotic solvents [31,32]. In addition to its renewability, Cyrene, as yet, has no associated pernicious effects and could potentially represent a direct and functional replacement in many of the fundamental reactions that typically employ DMF [31,32]. The replacement of solvents with regulatory issues with bio-derived alternatives has provided a series of advances within the cross-coupling arena [33], allowing efficient C–C bond formation via cornerstone Pd-based methods including Suzuki–Miyaura [34,35], Mizoroki–Heck [36,37], Sonogashira [38], Stille [39], Hiyama reactions [40], and hydroformylation reactions [41].

[1860-5397-12-187-1]

Figure 1: Cyrene vs. DMF – selected physical properties [31,32].

In the current study, we present the use of Cyrene as an alternative solvent (direct DMF replacement) for the Sonogashira reaction, as well as related Cacchi-type annulations [42,43], with an emphasis on scope and limitations of its application.

Results and Discussion

To explore the use of Cyrene in the context of the Sonogashira cross-coupling, we established a simple benchmark reaction using iodobenzene (1a) and phenylacetylene (2a) (Table 1). A typical literature-derived catalyst system was employed (Pd(PPh3)2Cl2 with CuI additive [44,45]) and conversion to diphenylacetylene (3a) was monitored.

Table 1: Reaction optimisation and comparison with existing solvents.a

[Graphic 1]
Entry Reaction conditions 3a (%)b
1 0.1 M, Et3N (3 equiv), 20 °C, 5 h 94
2 0.3 M, Et3N (3 equiv), 20 °C, 5 h 98
3 0.5 M, Et3N (3 equiv), 20 °C, 5 h 100
4 0.5 M, K3PO4 (3 equiv), 20 °C, 5 h c
5 0.5 M, Cs2CO3 (3 equiv), 20 °C, 5 h c
7 0.5 M, Et3N (1.1 equiv), 20 °C, 5 h 98
8 0.5 M, Et3N (1.1 equiv), 30 °C, 1 h 96
9d 0.5 M, Et3N (1.1 equiv), 30 °C, 1 h 81
10e 0.5 M, Et3N (1.1 equiv), 30 °C, 1 h 87

a1 (1 equiv, 0.25 mmol), 2 (1.05 equiv, 0.26 mmol), Pd(PPh3)2Cl2 (2 mol %), CuI (4 mol %), base (see table), Cyrene, temperature (see table), time (see table), N2. bIsolated yield. cReaction mixture solidified, product was not isolated. dTHF used as solvent. eDMF used as solvent.

Pleasingly, high conversion to product was immediately observed at room temperature in 5 h (94%, Table 1, entry 1). This high conversion was consistent across several reaction concentrations (Table 1, entries 2 and 3) allowing for a reduction in solvent volume, commensurate with the principles of green chemistry [46,47].

In attempts to further limit waste, we scanned a series of bases (see Supporting Information File 1); organic bases consistently performed more effectively and alternatives to Et3N provided no significant advantages. However, during this process we identified some potential limitations of this emerging solvent. Specifically, inorganic bases such as K3PO4 and Cs2CO3 (Table 1, entries 4 and 5) resulted in the generation of a solid reaction mixture. Further analysis revealed that the aldol products 4a and 4b (Figure 2) were generated under specific reaction conditions.

[1860-5397-12-187-2]

Figure 2: Aldol products 4a and 4b and single crystal X-ray structure of 4b.

The manufacturers note that when using Cyrene, materials to avoid are strong acids, and strong oxidising and reducing agents. Since sensitivity to base was not specified, we surveyed a range of bases at various temperatures to evaluate the limitations of Cyrene under such conditions (Table 2).

Table 2: Evaluation of the base sensitivity of Cyrene.a

Entry Base Temp. (°C) Reaction (Y/N)b
1 KOAc 25 N
50 Y
100 Y
2 Pyridine 25 N
50 Y
100 Y
3 K2CO3 25 Y
50 Y
100 Y
4 DIPEA 25 N
50 N
100 Y
5 Cs2CO3 25 Y
50 Y
100 Y
6 Et3N 25 N
50 N
100 Y
7 K3PO4 25 Y
50 Y
100 Y
8 DBU 25 Y
50 Y
100 Y
9 KOH 25 Y
50 Y
100 Y
10 t-BuOK 25 Y
50 Y
100 Y
11 NaH 25 Y
50 Y
100 Y

aReaction conditions: base (0.07 mmol) and Cyrene (0.5 mL) stirred at the indicated temeperature for 24 h before analysis by TLC and 1H NMR . bY = reaction occurs, N = no reaction. See Supporting Information File 1.

Under these specific reaction conditions, with the exception of Et3N and DIPEA, there was a clear base sensitivity displayed by Cyrene in the presence of all bases when the temperature was elevated above 25 °C. Organic bases such as pyridine (Table 2, entry 2), DIPEA (Table 2, entry 4), and Et3N (Table 2, entry 6) were tolerated at 25 °C with DIPEA and Et3N also tolerated at 50 °C. DBU, however, was not tolerated at any temperature (Table 2, entry 8). With the exception of KOAc (Table 2, entry 1), all inorganic bases resulted in reaction with the solvent at room temperature (Table 2, entries 3, 5, 7, and 9–11). The extent of the reaction varied from the generation of additional components, such as 4a and 4b, to gelation or complete solidification of the reaction mixture. However, in a moderately basic reaction mixture (e.g., using Et3N) at mild reaction temperatures this issue could be entirely avoided. As such, optimisation of the Sonogashira process allowed complete conversion and 96% isolated yield in 1 h at 30 °C (Table 1, entry 8). Importantly, the Cyrene-based system compared very favourably upon comparison with standard solvents (THF and DMF; Table 1, entries 9 and 10, respectively).

Continuing with the primary investigation and with an optimised set of reaction conditions, we sought to explore the generality of Cyrene in the Sonogashira cross-coupling (Scheme 2). Significantly, a broad range of functionalised aryl and heteroaryl iodides were tolerated (Scheme 2a).

[1860-5397-12-187-i2]

Scheme 2: Cyrene-based Sonogashira cross-coupling: Substrate scope. Isolated yields. aYield using DMF as solvent. b2 equiv of Et3N used. c24 h reaction time.

In addition, electron-deficient aryl bromides were accommodated, although with some variation in yield (3c, 3l, 3o, 3n). Functionality on the alkyne component was also typically well tolerated (Scheme 2b). While 3i and 3j required an extended reaction time, this was a substrate-specific problem for the use of 2a with these ortho-substituted aryl iodides that was not apparent for other alkyne/ortho-substituted iodoarene combinations (Scheme 2c).

Judicious selection of reacting components also enabled the development of a useful Cacchi-type annulation (Scheme 3) [42,43]. Specifically, employing ortho-amino (5) or ortho-hydroxyaryl iodides (6) in the Sonogashira process generated an alkyne intermediate that, upon increasing the reaction temperature from 30 °C to 60 °C, could undergo 5-endo-dig cyclisation to forge functionalised and pharmaceutically relevant indole, benzofuran, and aza-indole scaffolds in a single operation (7af) [48-52].

[1860-5397-12-187-i3]

Scheme 3: Cacchi-type annulation of o-amino/hydroxy iodoarenes. Isolated yields. aYield using DMF as solvent.

Finally, with the viewpoint of generality of DMF substitution by Cyrene, the base/temperature sensitivity issue may have potential implications for further applications of Cyrene within well-used organic transformations. For example, the majority of many other standard cross-coupling processes employ inorganic or organic bases and heat (e.g., Suzuki–Miyaura, Heck). Accordingly, Cyrene may be projected to be incompatible with standard conditions for these reactions and its use would necessitate base-free or exceptionally mildly basic reaction conditions. In contrast, amide-bond formation is the most practiced reaction in the pharmaceutical industry [4] and these are routinely performed in DMF at room temperature in the presence of organic bases [53]. As such, Cyrene may offer considerable potential in this area. However, additional work will be required to validate the practicality of Cyrene as a viable DMF replacement in these applications.

Conclusion

In summary, we have developed a mild and robust method for the Sonogashira reaction, employing the bio-derived and sustainable alternative to DMF, Cyrene. In addition, we have shown the capacity for extension of the utility of this new solvent towards enabling the cascade synthesis of functionalised indoles and benzofurans via a Cacchi-type annulation. Perhaps more importantly, we have documented some of the limitations of the use of Cyrene as a solvent, providing guidance emerging in relation to the thermal and chemical (base) stabilities of this promising green solvent.

Supporting Information

Supporting Information File 1: Experimental procedures, analytical data, copies of NMR spectra, and single X-ray crystal diffraction data of 4b.
Format: PDF Size: 9.4 MB Download

Acknowledgements

"Sigma-Aldrich Company Limited" is a subsidiary of Merck KGaA. We thank the University of Strathclyde for a PhD studentship (KLW), Sigma-Aldrich for financial and material support, Circa for Cyrene, and the EPSRC UK National Mass Spectrometry Facility at Swansea University for analyses.

References

  1. Chinchilla, R.; Nájera, C. Chem. Soc. Rev. 2011, 40, 5084–5121. doi:10.1039/c1cs15071e
    Return to citation in text: [1] [2]
  2. Chinchilla, R.; Nájera, C. Chem. Rev. 2007, 107, 874–922. doi:10.1021/cr050992x
    Return to citation in text: [1] [2]
  3. Miyaura, N.; Suzuki, A. Chem. Rev. 1995, 95, 2457–2483. doi:10.1021/cr00039a007
    Return to citation in text: [1]
  4. Roughley, S. D.; Jordan, A. M. J. Med. Chem. 2011, 54, 3451–3479. doi:10.1021/jm200187y
    Return to citation in text: [1] [2]
  5. A SciFinder search of Sonogashira reaction of aryl iodides revealed that of 341979 reactions, 140997 were performed in DMF. Search conducted 7th June 2016.
    Return to citation in text: [1]
  6. Breeden, S. W.; Clark, J. H.; Macquarrie, D. J.; Sherwood, J. Green solvents. In Green Techniques for Organic Synthesis and Medicinal Chemistry; Zhang, W.; Cue, B. W., Jr., Eds.; Wiley: Chichester, United Kingdom, 2012.
    Return to citation in text: [1]
  7. Prat, D.; Hayler, J.; Wells, A. Green Chem. 2014, 16, 4546–4551. doi:10.1039/C4GC01149J
    Return to citation in text: [1]
  8. Eastman, H. E.; Jamieson, C.; Watson, A. J. B. Aldrichimica Acta 2015, 48, 51–55.
    Return to citation in text: [1]
  9. Curzons, A. D.; Constable, D. C.; Cunningham, V. L. Clean Prod. Process. 1999, 1, 82–90.
    Return to citation in text: [1]
  10. Jiménez-González, C.; Curzons, A. D.; Constable, D. J. C.; Cunningham, V. L. Clean Technol. Environ. Policy 2004, 7, 42–50. doi:10.1007/s10098-004-0245-z
    Return to citation in text: [1]
  11. Constable, D. J. C.; Dunn, P. J.; Hayler, J. D.; Humphrey, G. R.; Leazer, J. L., Jr.; Linderman, R. J.; Lorenz, K.; Manley, J.; Pearlman, B. A.; Wells, A.; Zaks, A.; Zhang, T. Y. Green Chem. 2007, 9, 411–420. doi:10.1039/B703488C
    Return to citation in text: [1]
  12. Alfonsi, K.; Colberg, J.; Dunn, P. J.; Fevig, T.; Jennings, S.; Johnson, T. A.; Kleine, H. P.; Knight, C.; Nagy, M. A.; Perry, D. A.; Stefaniak, M. Green Chem. 2008, 10, 31–36. doi:10.1039/B711717E
    Return to citation in text: [1]
  13. http://www.acs.org/content/dam/acsorg/greenchemistry/industriainnovation/roundtable/solvent-selection-guide.pdf.
    AstraZeneca’s guidance.
    Return to citation in text: [1]
  14. Henderson, R. K.; Jiménez-González, C.; Constable, D. J. C.; Alston, S. R.; Inglis, G. G. A.; Fisher, G.; Sherwood, J.; Binks, S. P.; Curzons, A. D. Green Chem. 2011, 13, 854–862. doi:10.1039/c0gc00918k
    Return to citation in text: [1]
  15. Prat, D.; Pardigon, O.; Flemming, H.-W.; Letestu, S.; Ducandas, V.; Isnard, P.; Guntrum, E.; Senac, T.; Ruisseau, S.; Cruciani, P.; Hosek, P. Org. Process Res. Dev. 2013, 17, 1517–1525. doi:10.1021/op4002565
    Return to citation in text: [1]
  16. Byrne, F. P.; Jin, S.; Paggiola, G.; Petchey, T. H. M.; Clark, J. H.; Farmer, T. J.; Hunt, A. J.; McElroy, C. R.; Sherwood, J. Sustainable Chem. Processes 2016, 4, 7. doi:10.1186/s40508-016-0051-z
    Return to citation in text: [1]
  17. Alder, C. M.; Hayler, J. D.; Henderson, R. K.; Redman, A. M.; Shukla, L.; Shuster, L. E.; Sneddon, H. F. Green Chem. 2016, 18, 3879–3890. doi:10.1039/C6GC00611F
    Return to citation in text: [1]
  18. Chandrasekhar, S.; Narsihmulu, C.; Shameem Sultana, S.; Ramakrishna Reddy, N. Org. Lett. 2002, 4, 4399–4401. doi:10.1021/ol0266976
    Return to citation in text: [1]
  19. MacMillan, D. S.; Murray, J.; Sneddon, H. F.; Jamieson, C.; Watson, A. J. B. Green Chem. 2012, 14, 3016–3019. doi:10.1039/c2gc36378j
    Return to citation in text: [1]
  20. Taygerly, J. P.; Miller, L. M.; Yee, A.; Peterson, E. A. Green Chem. 2012, 14, 3020–3025. doi:10.1039/c2gc36064k
    Return to citation in text: [1]
  21. MacMillan, D. S.; Murray, J.; Sneddon, H. F.; Jamieson, C.; Watson, A. J. B. Green Chem. 2013, 15, 596–600. doi:10.1039/c2gc36900a
    Return to citation in text: [1]
  22. McGonagle, F. I.; MacMillan, D. S.; Murray, J.; Sneddon, H. F.; Jamieson, C.; Watson, A. J. B. Green Chem. 2013, 15, 1159–1165. doi:10.1039/c3gc40359a
    Return to citation in text: [1]
  23. Skowerski, K.; Białecki, J.; Tracz, A.; Olszewski, T. K. Green Chem. 2014, 16, 1125–1130. doi:10.1039/C3GC41943F
    Return to citation in text: [1]
  24. European Chemicals Agency (ECHA), Candidate List of Substances of Very High Concern for Authorisation. http://echa.europa.eu/candidate-list-table (accessed May 23, 2016).
    Return to citation in text: [1] [2]
  25. Fleckenstein, C. A.; Plenio, H. Green Chem. 2008, 10, 563–570. doi:10.1039/b800154e
    Return to citation in text: [1] [2]
  26. Bakherad, M. Appl. Organomet. Chem. 2013, 27, 125–140. doi:10.1002/aoc.2931
    Return to citation in text: [1] [2]
  27. Ibrahim, M. B.; Ali, B. E.; Malik, I.; Fettouhi, M. Tetrahedron Lett. 2016, 57, 554–558. doi:10.1016/j.tetlet.2015.12.086
    Return to citation in text: [1] [2]
  28. Gonçalves, R. S. B.; de Oliveira, A. B. V.; Sindra, H. C.; Archanjo, B. S.; Mendoza, M. E.; Carneiro, L. S. A.; Buarque, C. D.; Esteves, P. M. ChemCatChem 2016, 8, 743–750. doi:10.1002/cctc.201500926
    Return to citation in text: [1] [2]
  29. Camp, J. E.; Dunsford, J. J.; Dacosta, O. S. G.; Blundell, R. K.; Adams, J.; Britton, J.; Smith, R. J.; Bousfield, T. W.; Fay, M. W. RSC Adv. 2016, 6, 16115–16121. doi:10.1039/C5RA25712C
    Return to citation in text: [1] [2]
  30. McAfee, S. M.; Cann, J. R.; Josse, P.; Blanchard, P.; Cabanetos, C.; Welch, G. C. ACS Sustainable Chem. Eng. 2016, 4, 3504–3517. doi:10.1021/acssuschemeng.6b00554
    Return to citation in text: [1] [2]
  31. Sherwood, J.; De Bruyn, M.; Constantinou, A.; Moity, L.; McElroy, C. R.; Farmer, T. J.; Duncan, T.; Raverty, W.; Hunt, A. J.; Clark, J. H. Chem. Commun. 2014, 50, 9650–9652. doi:10.1039/C4CC04133J
    Return to citation in text: [1] [2] [3] [4]
  32. Koseki, K.; Ebata, T.; Kawakami, H.; Matsushita, H.; Itoh, K.; Naoi, Y. Method of producing (S)-4-hydroxymethyl-γ-lactone. U.S. Patent 5112994, May 12, 1992.
    Return to citation in text: [1] [2] [3] [4]
  33. Ilgen, F.; König, B. Green Chem. 2009, 11, 848–854. doi:10.1039/b816551c
    Return to citation in text: [1]
  34. Azua, A.; Mata, J. A.; Heymes, P.; Peris, E.; Lamaty, F.; Martinez, J.; Colacino, E. Adv. Synth. Catal. 2013, 355, 1107–1116. doi:10.1002/adsc.201201047
    Return to citation in text: [1]
  35. Wan, J.-P.; Wang, C.; Zhou, R.; Liu, Y. RSC Adv. 2012, 2, 8789–8792. doi:10.1039/c2ra21632a
    Return to citation in text: [1]
  36. Strappaveccia, G.; Ismalaj, E.; Petrucci, C.; Lanari, D.; Marrocchi, A.; Drees, M.; Facchetti, A.; Vaccaro, L. Green Chem. 2015, 17, 365–372. doi:10.1039/C4GC01677G
    Return to citation in text: [1]
  37. Rasina, D.; Kahler-Quesada, A.; Ziarelli, S.; Warratz, S.; Cao, H.; Santoro, S.; Ackermann, L.; Vaccaro, L. Green Chem., in press. doi:10.1039/C6GC01393G
    Return to citation in text: [1]
  38. Strappaveccia, G.; Luciani, L.; Bartollini, E.; Marrocchi, A.; Pizzo, F.; Vaccaro, L. Green Chem. 2015, 17, 1071–1076. doi:10.1039/C4GC01728E
    Return to citation in text: [1]
  39. Imperato, G.; Vasold, R.; König, B. Adv. Synth. Catal. 2006, 348, 2243–2247. doi:10.1002/adsc.200600248
    Return to citation in text: [1]
  40. Ismalaj, E.; Strappaveccia, G.; Ballerini, E.; Elisei, F.; Piermatti, O.; Gelman, D.; Vaccaro, L. ACS Sustainable Chem. Eng. 2014, 2, 2461–2464. doi:10.1021/sc5004727
    Return to citation in text: [1]
  41. Pongrácz, P.; Kollár, L.; Mika, L. T. Green Chem. 2016, 18, 842–847. doi:10.1039/C5GC01778E
    Return to citation in text: [1]
  42. Cacchi, S.; Fabrizi, G. Chem. Rev. 2011, 111, PR215–PR283. doi:10.1021/cr100403z
    Return to citation in text: [1] [2]
  43. Humphrey, G. R.; Kuethe, J. T. Chem. Rev. 2006, 106, 2875–2911. doi:10.1021/cr0505270
    Return to citation in text: [1] [2]
  44. Stuart, D. R.; Bertrand-Laperle, M.; Burgess, K. M. N.; Fagnou, K. J. Am. Chem. Soc. 2008, 130, 16474–16475. doi:10.1021/ja806955s
    Return to citation in text: [1]
  45. Chen, X.; Wu, Y.; Xu, J.; Yao, H.; Lin, A.; Huang, Y. Org. Biomol. Chem. 2015, 13, 9186–9189. doi:10.1039/C5OB01338K
    Return to citation in text: [1]
  46. Anastas, P. T.; Warner, J. C. Green Chemistry: Theory and Practice; Oxford University Press: New York, NY, U.S.A., 1998; p 30.
    Return to citation in text: [1]
  47. Anastas, P.; Eghbali, N. Chem. Soc. Rev. 2010, 39, 301–312. doi:10.1039/B918763B
    Return to citation in text: [1]
  48. Heinrich, T.; Seenisamy, J.; Emmanuvel, L.; Kulkarni, S. S.; Bomke, J.; Rohdich, F.; Greiner, H.; Esdar, C.; Krier, M.; Grädler, U.; Musil, D. J. Med. Chem. 2013, 56, 1160–1170. doi:10.1021/jm3016014
    Return to citation in text: [1]
  49. Hong, S.; Kim, J.; Seo, J. H.; Jung, K. H.; Hong, S.-S.; Hong, S. J. Med. Chem. 2012, 55, 5337–5349. doi:10.1021/jm3002982
    Return to citation in text: [1]
  50. Hong, S.; Lee, S.; Kim, B.; Lee, H.; Hong, S.-S.; Hong, S. Bioorg. Med. Chem. Lett. 2010, 20, 7212–7215. doi:10.1016/j.bmcl.2010.10.108
    Return to citation in text: [1]
  51. Tang, J.; Hamajima, T.; Nakano, M.; Sato, H.; Dickerson, S. H.; Lackey, K. E. Bioorg. Med. Chem. Lett. 2008, 18, 4610–4614. doi:10.1016/j.bmcl.2008.07.019
    Return to citation in text: [1]
  52. Seath, C. P.; Wilson, K. L.; Campbell, A.; Mowat, J. M.; Watson, A. J. B. Chem. Commun. 2016, 52, 8703–8706. doi:10.1039/C6CC04554E
    Return to citation in text: [1]
  53. El-Faham, A.; Albericio, F. Chem. Rev. 2011, 111, 6557–6602. doi:10.1021/cr100048w
    Return to citation in text: [1]
Other Beilstein-Institut Open Science Activities