3 article(s) from Łapiński, Marcin
a) The chronoamperometry curve (single pulse at E = 1 V vs Ag/AgCl (0.1 M KCl)) recorded during PED...
Jump to Figure 1
a) Raman spectra of Ti/TiO2 (blue), Ti/TiO2/BiVO4 (red), and Ti/TiO2/BiVO4/PEDOT:PSS (black). SEM m...
Jump to Figure 2
XPS spectra of a) Ti 2p region, b) Bi 4f region, and c) O 2p and V 2p regions for as-prepared and h...
Jump to Figure 3
The cyclic voltammetry curves recorded in aqueous 0.5 M K2SO4 with scan rate 100 mV·s−1 of: a) Ti/T...
Jump to Figure 4
a) The cyclic voltammetry curves of Ti/TiO2/BiVO4/PEDOT:PSS recorded with various scan rates (10–20...
Jump to Figure 5
Beilstein J. Nanotechnol. 2019, 10, 483–493, doi:10.3762/bjnano.10.49
Scheme of the formation of the gold nanoislands.
SEM images of 2.8 nm Au films on a Si(111) substrate: a) as prepared, annealed at b) 150 °C, c) 200...
SEM images of 2.8 nm Au films on a Si(111) substrate annealed at a) 450 °C, b) 550 °C, c) 600 °C fo...
SEM images of Au films of different thicknesses on a Si(111) substrate annealed at 550 °C for 15 mi...
a) Number of nanoparticles and b) average diameter of nanoparticles as function of the Au film thic...
Left: AFM image of a 2.8 nm Au film on a Si(111) substrate annealed at 550 °C for 15 min; right: cr...
Jump to Figure 6
XRD result of a 2.8 nm Au film annealed at 550 °C for 15 min and an as-prepared 2.8 nm Au film on S...
Jump to Figure 7
XPS (Au region) results for the 2.8 nm Au thin film on a Si(111) substrate annealed at 550 °C for 1...
Jump to Figure 8
XPS result (Si region) for the 2.8 nm Au film on a Si(111) substrate annealed at 550 °C for 15 min.
Jump to Figure 9
Absorbance spectra recorded for a 2.8 nm Au film on a Si(111) substrate annealed at 550 °C for 15 m...
Jump to Figure 10
SEM image of the gold nanoislands on the silicon substrate (sample 2.8 nm Au film on Si(111) substr...
Jump to Figure 11
Setup for the FDTD and FDTD/DFT simulations. Left: view from the bottom, zx-plane; yellow rectangle...
Jump to Figure 12
Calculated intensity distribution of the electromagnetic field with unpolarized incident light of a...
Jump to Figure 13
Calculated amplitudes of the components of the electromagnetic field with unpolarized incident ligh...
Jump to Figure 14
Calculated absorbance (as log(Io/Ir), where Io is an incident flux, and Ir – reflected flux), as th...
Jump to Figure 15
Beilstein J. Nanotechnol. 2018, 9, 2599–2608, doi:10.3762/bjnano.9.241
Scheme of GO-P synthesis.
SEM images of A) GO and B) GO-P. The inset in Figure 2A shows a crinkled GO flake. Scale bar: 5 μm.
FTIR spectra of A) GO and B) GO-P samples.
UV–vis spectrum of A) GO sample and B) GO-P sample.
Raman spectra of A) GO and B) GO-P.
XPS spectra of A) GO and B) GO-P. The inset shows an enlarged view of the energy region characteris...
High-resolution XPS spectra with curve fittings for the C 1s and O 1s for GO (A and B) and GO-P (C ...
TG and DTG curves of A) GO and B) GO-P.
DSC and DDSC curves of A) GO sample and B) GO-P. The TG curves are the same as in Figure 8.
The temperature dependence of the total surface conductivity of the analyzed GO-P sample.
Beilstein J. Nanotechnol. 2017, 8, 1094–1103, doi:10.3762/bjnano.8.111
Subscribe to our Latest Articles RSS Feed.
Register and get informed about new articles.
Follow the Beilstein-Institut