2 article(s) from Dickreuter, Simon
Schematic illustration of the preparation of variable-size gold nanoparticle arrays on top of a sil...
Jump to Figure 1
SEM images of the gold precursor particles after oxygen plasma treatment (a, b) and gold nanopartic...
Jump to Figure 2
Dependence of the mean equivalent diameter of the gold particles on the ED duration. Three separate...
Jump to Figure 3
Mean dark-field spectra of the different samples. For each sample 25 spectra at different positions...
Jump to Figure 4
Background-corrected mean Raman spectra of the four different samples. For each sample three Raman ...
Jump to Figure 5
Filling factor-corrected Raman intensities of the different samples, for the two peaks at 1085 cm−1...
Jump to Figure 6
Filling factor-corrected Raman spectrum of sample A compared to a Raman spectrum on smooth gold fil...
Jump to Figure 7
Beilstein J. Nanotechnol. 2018, 9, 1977–1985, doi:10.3762/bjnano.9.188
Optical set-up. The sample is mounted on an x–y micrometer stage and can be moved reversibly below ...
(a) Laser profile at the sample position taken with a CCD camera. Next to the central maximum the f...
Scanning electron micrographs of different types of triangles used in the course of this work. The ...
AFM image of a colloid lithography triangle. (a) Top view; (b) 3D image.
Upper left: Fluence distribution along the laser spot radius as described in the Experimental secti...
(a) Calculated field intensity enhancement, (b) dissipation, and (c) field distribution for a nanot...
(a) AFM image of a Si surface with ablation holes, generated by irradiation of colloid lithography ...
Hole depth (as determined from profiles such as in Figure 7b, measured with respect to the height of the fla...
Jump to Figure 8
AFM image and height profile of an ablation hole generated by far-field ablation of bare Si (same w...
Jump to Figure 9
Depth of holes in Si, generated by far-field ablation, as a function of the peak fluence.
Jump to Figure 10
SEM micrographs of two different types of nanotriangles prepared by electron beam lithography, and ...
Jump to Figure 11
FDTD calculations for the structures presented in Figure 11. The field intensity enhancement was extracted i...
Jump to Figure 12
(a) SEM micrograph and (b) calculated field distribution for the center region of a bow-tie antenna...
Jump to Figure 13
Evolution of laser-molten gold triangles (thickness: 40 nm, side length: 530 nm, prepared by colloi...
Jump to Figure 14
(a) SEM micrograph of colloid lithography nanotriangles irradiated with a 300 ps laser pulse (wavel...
Jump to Figure 15
Molten volume at the triangle tips vs local laser fluence.
Jump to Figure 16
SEM micrographs of a 40 nm Au film on Si, after exposition to a 300 ps laser pulse at 800 nm wavele...
Jump to Figure 17
Beilstein J. Nanotechnol. 2013, 4, 588–602, doi:10.3762/bjnano.4.66
Subscribe to our Latest Articles RSS Feed.
Register and get informed about new articles.
Follow the Beilstein-Institut