TY - JOUR A1 - Javaid, Rahat A1 - Kawasaki, Shin-ichiro A1 - Suzuki, Akira A1 - Suzuki, Toshishige M. T1 - Simple and rapid hydrogenation of p-nitrophenol with aqueous formic acid in catalytic flow reactors JF - Beilstein Journal of Organic Chemistry PY - 2013/// VL - 9 SP - 1156 EP - 1163 SN - 1860-5397 DO - 10.3762/bjoc.9.129 PB - Beilstein-Institut JA - Beilstein J. Org. Chem. UR - https://doi.org/10.3762/bjoc.9.129 KW - catalytic tubular reactor KW - flow chemistry KW - formic acid KW - hydrogenation KW - p-aminophenol KW - p-nitrophenol N2 - The inner surface of a metallic tube (i.d. 0.5 mm) was coated with a palladium (Pd)-based thin metallic layer by flow electroless plating. Simultaneous plating of Pd and silver (Ag) from their electroless-plating solution produced a mixed distributed bimetallic layer. Preferential acid leaching of Ag from the Pd–Ag layer produced a porous Pd surface. Hydrogenation of p-nitrophenol was examined in the presence of formic acid simply by passing the reaction solution through the catalytic tubular reactors. p-Aminophenol was the sole product of hydrogenation. No side reaction occurred. Reaction conversion with respect to p-nitrophenol was dependent on the catalyst layer type, the temperature, pH, amount of formic acid, and the residence time. A porous and oxidized Pd (PdO) surface gave the best reaction conversion among the catalytic reactors examined. p-Nitrophenol was converted quantitatively to p-aminophenol within 15 s of residence time in the porous PdO reactor at 40 °C. Evolution of carbon dioxide (CO2) was observed during the reaction, although hydrogen (H2) was not found in the gas phase. Dehydrogenation of formic acid did not occur to any practical degree in the absence of p-nitrophenol. Consequently, the nitro group was reduced via hydrogen transfer from formic acid to p-nitrophenol and not by hydrogen generated by dehydrogenation of formic acid. ER -