Oxidative dehydrogenation of C–C and C–N bonds: A convenient approach to access diverse (dihydro)heteroaromatic compounds

Nitrogen heteroarenes form an important class of compounds which can be found in natural products, synthetic drugs, building blocks etc. Among the diverse strategies that were developed for the synthesis of nitrogen heterocycles, oxidative dehydrogenation is extremely effective. This review discusses various oxidative dehydrogenation strategies of C–C and C–N bonds to generate nitrogen heteroarenes from their corresponding heterocyclic substrates. The strategies are categorized under stoichiometric and catalytic usage of reagents that facilitate such transformations. The application of these strategies in the synthesis of nitrogen heteroarene natural products and synthetic drug intermediates are also discussed. We hope this review will arouse sufficient interest among the scientific community to further advance the application of oxidative dehydrogenation in the synthesis of nitrogen heteroarenes.


Introduction
By virtue of their presence in bioactive natural products and active pharmaceutical ingredients, nitrogen heterocycles and heteroaromatics form an important class of compounds [1]. A large variety of such compounds are discovered so far and their therapeutic potential in diverse disease models has been thoroughly investigated [2]. For example thiazoles and oxazoles are found in various bioactive natural products, organic dyes and pharmaceutical intermediates [3][4][5][6]. Substituted benzimidazoles occur in veterinary medicines, as anthelmintic agents and are used in a plethora of human therapeutic areas such as psychiatrics, ulcers, hypertension, cancers etc. [7][8][9][10]. Quinazolines and quinazolones are obtained in bioactive alkaloids such as luotonin A, tryptanthrin and many more ( Figure 1) [11,12]. Quinazoline derivatives work as potential inhibitors of epidermal growth factor (EGF) and tyrosine kinase receptors and also display antibacterial, antitubercular and antiviral properties [13][14][15][16]. Last but not the least, 1,4-dihydropyridines as calcium channel blockers, such as nifedipine and nicardipine, are found as effective chemotherapeutic medicines and antihypertensive agents [17]. Hence to attend their biological usefulness diverse synthetic processes are reported to access these molecules [18]. Multicomponent reactions are one of the key synthetic strategies that are applied to generate various nitrogen heterocycles and subsequent aromatization of these heterocycles afforded the corresponding heteroaromatic derivatives [19]. The aromatization of nitrogen heterocycles is facilitated mainly by dehydrogenation of the ring containing the nitrogen atom. The dehydrogenation strategy is an atom economical, efficient and sustainable method to access nitrogen containing heteroaromatic molecules. They can be either achieved by metals (like iridium, ruthenium, aluminum etc.) mediated processes (in absence of hydrogen acceptor) or via oxidative dehydrogenation in the presence of appropriate oxidants.
In comparison, oxidative dehydrogenation of nitrogen heterocycles are mediated by an oxidant, which chelates with the nitrogen functionality of the heterocycles, and facilitates dehydrogenation by elimination (path a'). The dehydrogenation at times lead to complete aromatization of the moiety based on the dehydrogenation capability of the oxidant as well as the presence of the appropriate acidic protons in the heterocyclic substrate (path b', Scheme 1). To attend greener synthesis metal catalyzed and organocatalytic aerobic oxidative dehydrogenation strategies have been reported lately. This review will discuss various techniques of oxidative dehydrogenation of nitrogen heterocycles via reagents, catalysts and also in the presence of stoichiometric oxidants or under aerobic conditions.
The general mechanistic pathway proposed for these transformations involved either an ionic or a SET mechanism. The emphasis was provided more on the ionic mechanism but a SET pathway cannot be excluded. The representative mechanism involved the coordination of the amine substrate with IBX, leading to the formation of A via reduction of the iodine center [31][32][33][34]. Intermediate A could then be converted to the desired heteroaromatic moiety 12, either by elimination of water in a concerted fashion as proposed by the ionic pathway (Scheme 3a) or via a SET mechanism to generate a radical cation B, followed by fragmentation to afford 12 (Scheme 3b). Either of these processes provided the imine moiety, along with o-iodosobenzoic acid (IBA, Scheme 3).
In general, IBX-mediated oxidative dehydrogenation is conducted at high temperatures (>50 °C). Interestingly IBX explodes at ≈200 °C. Hence there is a hesitation to utilize IBX in the industry due to fear of explosion from "run-away" reactions. To alleviate this problem, IBX-mediated room temperature oxidative dehydrogenation can be utilized. Recently IBXmediated oxidative dehydrogenation of tetrahydroquinazolines has been demonstrated at room temperature. The reaction involved a one-pot condensation-oxidative dehydrogenation of 2-aminobenzylamine (15) with appropriate aldehydes to dihydroquinazoline 17 and aromatic quinazolines 16 with 1 or 2 equivalents of IBX, respectively (Scheme 4) [35]. The mechanism of conversion could be similar to the one depicted in Scheme 3.
In another example anhydrous cerium chloride was used as a co-catalyst to activate IBX towards oxidative dehydrogenation of various heterocycles such as 1-substituted tetrahydroisoquinolines 18, tetrahydro-β-carbolines 19 and benzothiazolidines 20 to their corresponding heterocyclic analogs 21-24 at room temperature [36]. Anhydrous cerium chloride is believed to coordinate with IBX to increase the electrophilicity of the iodine center and thereby generating F, where the coordination of the amine substrate becomes much more facile thereby promoting the reaction at room temperature (Scheme 5). Transition metal-free approaches for oxidative dehydrogenation Apart from IBX, various other oxidants (non-metallic) have been applied for oxidative dehydrogenation of C-C and C-N bonds. The synthesis of heteroaromatic compounds such as quinazolinones were facilitated by iodine and DDQ-mediated oxidative dehydrogenation as depicted in Scheme 6 [37][38][39][40]. Typically, quinazolinone 25 was refluxed in the polar solvent ethanol with iodine to afford the dihydro derivative 26 (Scheme 6). Interestingly, DDQ facilitated similar reactions at room temperature.
DDQ also induced oxidative dehydrogenation in 2-thiazolidines 27 and 2-oxazolidines 28 at room temperature in the presence of 4 Å molecular sieves with dichloromethane as solvent to generate diversely substituted 2-thiazoles 29 and 2-oxazoles 30 (Scheme 7) [41]. The putative mechanism initiated with the reaction of DDQ on the C4 H-atom of 27 and 28, respectively, to form the transition state E′ (path a). Alternatively it can also attack the H-atom at C5 to generate C′ (path b). A single electron transfer and subsequent H-abstraction on E′ or C′ lead to the formation of F′ or D′, respectively. F′ or D′ undergoes H-migration to generate 29 and 30, respectively, along with DDQ-H 2 . A further investigation revealed that path b is the preferred pathway for this transformation (Scheme 7) [41].
An economical and simple procedure for the oxidative dehydrogenation is demonstrated by the usage of ≈0.6 equivalents of oxone as an appropriate oxidant in wet dimethylformamide, at room temperature for the reaction of o-phenylenediamine 31 with appropriate aldehydes to afford 2-substituted benzimidazoles 32 in excellent yield [42]. The reaction conditions are amenable to a wide range of substrates including aliphatic, aromatic and heteroaromatic aldehydes. Neither the steric nor the electronic properties of the substituents on the aldehydes affect the yield of the reaction. In general, the crude products were isolated by simple extraction or precipitation from the reaction mixture in moderate to excellent yield. The only limitation observed in this procedure is the use of aldehydes that contain functionalities which are susceptible to oxidation in the presence of oxone, failed to generate the desired products (Scheme 8a).
An interesting application of oxone in the synthesis of 2-substituted benzimidazoles 33a, involved a one-pot condensation-ring distortion-oxidative dehydrogenation of o-aminobenzylamines 33 and appropriate aldehydes [43]. The reaction conditions included 0.6 equiv of oxone at room temperature with DMF as the solvent. Various aliphatic, aromatic and heteroaromatic aldehydes are reacted with o-aminobenzylamine and substituted o-aminobenzylamines to provide the desired products in decent yields (Scheme 8b).
Kumar et al. demonstrated transition metal-free α-C(sp 3 )-H bond functionalization of amines via an oxidative cross-dehy-drogenative coupling reaction [44]. They reported a one-pot synthesis of substituted dihydroquinazolines 35 from a variety of o-aminobenzylamines with appropriate aldehydes and alkylnitrates. The initial condensation of substituted o-aminobenzylamines with aldehydes afforded the substituted tetrahydroquinazoline 34, which was subsequently treated with a catalytic amount of potassium iodide (0.2 mmol) and 0.25 mL of tertbutylhydroperoxide (TBHP, 70 wt %) in water (4 equiv) to afford the dihydroisoquinazoline 34a, which got oxidized to the quinazolium intermediate 34b. Hydroxylation of 34b afforded 34c, which was further reacted with nitroalkanes at 50 °C to generate the desired substituted dihydroquinazolines 35 in moderate to excellent yields (Scheme 9) [44].
In another example commercially available sodium hypochlorite (NaOCl) was used as an oxidant, under mild conditions in a highly efficient oxidative dehydrogenative coupling of o-aminobenzylamines and o-aminobenzyl alcohols 36 and 37, respectively, with appropriate aldehydes to generate substituted quinazolines 38 and 4H-benzo[d] [1,3]oxazines 39 in excellent yields [45]. A typical procedure involved the condensation of 36 and 37 in methanol at room temperature to afford the crude heterocycles which were then further treated with NaOCl (≈3.0 equiv) in the same pot at room temperature to afford the desired products which were then purified by column chromatography (Scheme 10).
yields [46]. Typically the reaction occurs in toluene at 0 ºC to room temperature and is completed within 6 h. When 40a was treated with 1.1 equivalents of NBS it furnished 42 and when 40b was reacted with 2 equivalents of the same reagent, it afforded 41. The ester functionality on 40b facilitated the complete aromatization of the ring to afford the desired products (Scheme 11).
It is always a tedious effort to activate a sp 3 C-H bond towards any transformation. A method that enables such transformation requires special mention. Herein we indicate such an elegant report where o-aminobenzamide 43 were reacted with various methyl(hetero)arenes in the presence of di-tert-butyl peroxide (DTBP, 0.9 mmol), p-toluenesulfonic acid (0.6 mmol) in DMSO at 110 °C for ≈20 hours to facilitate a variety of quinazolinones 44 (Scheme 12) [47]. N-Alkyl benzamides 44´ were also synthesized with this protocol. The average yield ranged from 30 to 92%. Other than methyl(hetero)arenes dimethylamides were also used as C-synthon for such intermolecular annulation to afford unsubstituted quinazolinones. A putative mechanism involved the homolysis of DTBP to generate tertbutoxide radicals, which in turn abstracts a proton radical from the methyl(hetero)arene to facilitate the formation of a benzylic radical. The benzylic radical couples with o-aminobenzylamide to generate H. It then interacts with the tert-butoxide radical to generate I. I then undergoes an intramolecular cyclization to form J, followed by aromatization to afford the desired compounds.

Transition metal-induced oxidative dehydrogenation
Since the applications of various transition metals as catalysts in C-N, C-O and C-C bond forming reactions, they have become very popular reagents in synthetic organic chemistry. Their utility has been explored in various organic reactions including oxidative dehydrogenation of heterocycles. A few of such metal-mediated reactions are discussed below.
By virtue of its immense pharmaceutical significance Hantzsch 1,4-dihydropyridines (1,4-DHP) have garnered substantial attention in the scientific community [48]. They are found in various chemotherapeutic agents and are used for the treatment of cardiovascular diseases such as hypertension and angina pectoris [49]. They are an important class of calcium channel blockers that reduces the transmembrane calcium current upon binding, thereby relaxing the heart muscles [50]. Interestingly, 1,4-DHP drugs are metabolized in the liver by CYP-450 enzymes and undergo oxidative dehydrogenation to generate the corresponding pyridine derivatives [51]. To understand and model these biological pathways, oxidative aromatization of 1,4-DHP to their corresponding pyridine derivatives has acclaimed wide attention. A variety of oxidants such as urea nitrate, BrCCl 3 /hν, nitric acid, nitric oxide, N-methyl-N-nitrosop-toluenesulfonamide, DDQ etc. has been used to facilitate the conversion [52][53][54][55]. Unfortunately most of these methods suffer from the disadvantages of prolonged reaction time, poor yield and competing oxidative dealkylation of 4-benzyl and secalkyl-substituted DHP substrates. Alternative strategies involving transition metals and microwave heating, ultrasonication and solvent-free conditions alleviated the drawbacks to a major extent [56][57][58][59][60][61]. One such useful strategy include manganese dioxide (MnO 2 )-mediated oxidative aromatization of 1,4-DHP 45 to afford substituted pyridine derivatives 46 under microwave conditions (Scheme 13) [62]. This approach drastically reduces the reaction time to ≈1 minute and provided the desired products in excellent yields (Scheme 13).
In another example Peng et al. have demonstrated the use of manganese oxide (MnO 2 ) as an oxidant in the synthesis of 2-arylquinazolines from its heterocyclic precursors [63]. A variety of substituents were well tolerated on both quinazoline and on the appended aromatic ring to generate the desired compounds 48 in moderate to excellent yield. The reaction conditions involved refluxing of 2-aryl-1,2,3,4-tetrahydroquinazoline 47 in chloroform for twelve to twenty hours (Scheme 14). In a similar effort, quinazolinones were synthesized by potassium permanganate-mediated oxidative dehydrogenation in the presence of acetone under reflux conditions [64].
Not very many metal oxidants have been explored to transform aromatic Schiff's bases to heterocycles. In one such elegant effort, Venkataramani et al. [67] used barium manganate as an oxidant. The initial condensation of different o-phenylenediamine, o-aminophenol or o-aminothiophenol with aromatic aldehydes produced the corresponding Schiff's bases 53 which underwent a one-pot cyclisation and oxidative dehydrogenation in the presence of barium manganate to produce benzimidazoles, benzoxazoles and benzothiazoles 54, respectively in appropriate solvent at ambient or lower temperature (Scheme 16).

Catalytic approaches
As a normal evolution of any synthetic approaches, oxidative dehydrogenation also progressed from reagent-based approaches to catalytic methodologies. Aerobic oxidation in the presence of bioinspired and metal catalysts as well as synthetic oxidants-based metal-catalyzed reactions bolstered the application of this strategy in accessing various heteroarenes. In this section we discuss a few of such examples.

Bioinspired aerobic dehydrogenation
The bioinspired aerobic dehydrogenation strategy is an environmentally "green" way to access heteroaromatic moieties from their heterocyclic precursors [68]. The approach is inspired from enzyme catalyzed reactions where organic cofactors are used as naturally occurring oxidases and oxygenases [69]. One of the early examples of bioinspired aerobic oxidation involved copper amine oxidation to facilitate the transformation of amines to aldehydes [70,71] quinine-based catalysts as alternatives to metal-based catalysts are reported, that facilitates oxidative dehydrogenation of amines [72][73][74][75][76][77][78][79][80]. An exquisite example in this aspect involved phenanthroline-based catalysts that are applied for oxidative dehydrogenation of 2°-amines [81]. In this regard, Stahl and co-workers showed that coordination of 1,10-phenanthroline-5,6-dione (phd) with Zn 2+ salts enhances the catalytic capacity of phd towards oxidative dehydrogenation of a variety of nitrogen heterocycles (Scheme 17). Thorough investigation and isolation of Zn-phd complexes revealed that the coordination of Zn 2+ with the remote nitrogen of phd rationalizes the efficiency of this system towards oxidative dehydrogenation of 2°-amines. To assess the substrate scope, various secondary amines were successfully oxidized in the presence of catalytic Zn-phd complexes to provide the corresponding oxidized product. The optimized catalytic system facilitated the conversion of tetrahydroisoquinolines 55a to 3,4-dihydroisoquinolines 56a (Scheme 17). Electron-donating groups improved the reaction yield with reduced reaction time. Various analogs 56b-d with both aryl and alkyl substitution at C1 were synthesized. In another example tetrahydro-β-carbolines 57 were readily converted to 3,4dihydro-β-carbolines 58 under the same optimized conditions. Aryl substitution at C1 was well tolerated. Quinazolines 60 were formed in an efficient manner from tetrahydroquinazolines 59. Unlike other heterocycles, the reactions with electronwithdrawing substrates were favored in this case. A slight modification (5 mol % phd, 1 mol % ZnI 2 and 1 mol % PPTS) of the existing procedure afforded indoles 62 from indolines 61.
Bioinspired flavin mimics were also used as catalysts for oxidative dehydrogenation of dihydropyridines 63 and benzothiazolines 64 to substituted pyridines 65 and benzothiazoles 66, respectively, in moderate to excellent yields (Scheme 18) [82]. The reaction was performed in methanol at ambient temperature. The optimized procedure also generated 65 and 66 from a one-pot reaction of various dicarbonyls, formaldehyde, ammo- nium acetates, o-aminothiophenols and various aldehydes, respectively (Scheme 18).
In another example an ortho-quinone-based bioinspired catalyst was used in the oxidative dehydrogenation of tetrahydroisoquinolines 67 to dihydroisoquinoline 68 in acetonitrile at 60 °C under oxygen atmosphere (Scheme 19) [83]. In general, electron-donating and neutral functionality (R = OMe, H) on the tetrahydroisoquinolines were well tolerated. Interestingly the electron-withdrawing groups were conspicuous by their absence. The reaction followed a free radical mechanism as exemplified by the oxidative dehydrogenation of DHPs. The initial step involved the formation of the phthalimide-N-oxyl radical (PINO) via transfer of hydrogen from NHPI to O 2 . Co 2+ -assisted this step by associating with oxygen to generate a Co 3+ -oxygen complex. It then abstracts the hydrogen from NHPI. Next, PINO abstracted a hydrogen from the DHP produced to generate radical X which aromatizes via hydrogen abstraction by PINO and/or the Co 3+ -oxygen complex to provide the pyridine derivatives (Scheme 21).

Metal-catalyzed aerobic dehydrogenation
One of the other noteworthy examples is a copper chloride/1,4diazabicyclo[2.2.2]octane (DABCO) and 4-hydroxy-2,2,6,6tetramethyl-1-piperidinyloxy (TEMPO)-catalyzed aerobic oxidative dehydrogenation approach for the synthesis of quinazolines 73 and 4H-3,1-benzoxazines 74 [85]. This is the first time that such a catalytic system was harnessed for successful oxidation of heterocycles (a similar transformation was achieved with NaOCl as the oxidant (Scheme 10)). It demonstrates the successful generation of the aforementioned heteroaromatic compounds in a one-pot reaction from aldehydes with 2-aminobenzylamines and 2-aminobenzyl alcohols with molecular oxygen as the oxidant (Scheme 22). It is a simple and environmentally benign protocol for the generation of these heterocycles (Scheme 22) in excellent yield. gets deprotonated to afford dihydroquinazoline Z´ along with Y´ and TEMPOH. Finally, Z´ is further oxidized to 73. TEMPOH oxidizes back to TEMPO which further repeats the catalytic cycle (Scheme 23).
In another interesting example 1-substituted-1,2,3,4-tetrahydroisoquinolines were selectively dehydrogenated in the presence of catalytic Pd/C, modified by potassium phosphate trihydrate (K 3 PO 4 ·3H 2 O) under oxygen atmosphere [86]. Original Pd/C lead to sluggish reactions compared to the modified form. The catalyst could also be recycled at least thrice (Scheme 24). This facile synthesis demonstrated seamless production of dihydroisoquinolines. They were the predominant products with nearly 3-5% formation of the aromatic isoquinoline (Scheme 24). reacted with diphenylacetylene to generate the target compounds in excellent yields.
A plausible mechanistic rational involved the coordination of L 2 RuCl 2 (L = p-cumene) with the more basic quinazolinone nitrogen to form complex K, which underwent β-H elimination to afford quinazolinone L and (RuLCl)-H, which further reduced to Ru 0 . Oxygen revived active Ru I from Ru 0 . The neat step involved cross coupling/annulation of L with alkyne M. This is facilitated by coordination of L with Ru II , followed by C-H activation to afford N. Migratory insertion of M on N generate O and subsequent reductive elimination of O afforded the desired compounds (Scheme 26). Scheme 25: Ruthenium-catalyzed polycyclic heteroarenes.
Recently, an aerobic photooxidative synthesis of quinazoline from 2-aminobenzylamine and aldehyde in the presence of visible light and catalytic MgI 2 was described [89]. The reaction takes about 8-72 hours to complete depending on the substituents present in starting amines and aldehydes (Scheme 28). Initial condensation of 2-aminobenzylamine with an aldehyde generates 2-aryl-1,2,3,4-tetrahydroquinazolines which underwent oxidative dehydrogenation in the presence of magnesium iodide (that generates iodine) to afford the aromatic quinazoline 80 in excellent yield.

Metal-catalyzed oxidant induced dehydrogenation
Our next discussion involved the oxidative dehydrogenation of C-C and C-N bonds utilizing metal catalysts with synthetic oxidants. The first example is illustrated by transforming an Scheme 29: Ferrous chloride-catalyzed aerobic dehydrogenation of 1,2,3,4-tetrahydroquinolines.
indoline to an indole [91]. In general, indoles are one of the most popular moieties that are observed in a plethora of bioactive natural products and active pharmaceutical ingredients. The putative mechanism of this transformation involved a single electron transfer reaction of the Cu(I) catalyst with TBPC to afford a tert-butoxy radical, which then reacts with 85 by Two mechanisms were proposed for this conversion. In one the tert-butyl peroxy radicals were generated by the interaction of Cu salts with TBHP. This radical abstracts the C4 hydrogen of the dihydropyrimidine to generate P, which would then react with Cu(II) to provide species such as Q or iminium ion S. Either of them would aromatize to generate the desired product 90. The alternate proposal involved a ligand exchange between Cu(II)X 2 and dihydropyrimidinone 88 providing compound T, which gets oxidized in the presence of TBHP to generate U which undergoes further reductive elimination to afford 90 (Scheme 33). Recently Xiao et al. [94] has reported an acceptor-free oxidative dehydrogenation with a versatile iridium catalyst (Scheme 35). A variety of tetrahydroquinolines 93 were converted to the aromatic quinoline 94 using the iridium catalyst in 2,2,2-trifluoroethanol (TFE) at higher temperature. As an extension of the optimized reaction conditions tetrahydroquinoxalines were also converted into quinoxalines in excellent yields. The high activity and broad substrate scope of this catalytic system make this protocol very promising for laboratory and industrial applications.
The use of catalytic palladium on carbon in oxidative dehydrogenation was also well explored in the last few decades. In most of these reactions, either an additive or an acceptor is used along with palladium to improve the rate of the reaction. Recently Török et al. [95] reported the synthesis of 1-aryl-βcarboline using montmorillonite K-10 and Pd/C as catalysts.
The microwave-assisted synthesis of β-carboline 96 from tetrahydro-β-carboline 95 using catalytic Pd/C and lithium carbonate at high temperature is also reported [96]. This high yielding procedure gets completed within a few minutes (Scheme 36). Although the reaction conditions were not well tolerated by few sensitive groups, most of the β-carbolines were successfully prepared utilizing this procedure, including the alkaloid harmine with 99% yield. The final product precipitates at the end of the reaction and hence required minimum purification.

Organocatalytic aerobic dehydrogenation
Metal-free organocatalytic aerobic oxidative dehydrogenation of heterocycles is another atom economical and green strategy of accessing various heteroaromatics. Not very many reports are present in the literature to demonstrate this. Hence, the available few render special attention. One such attractive strategy is the 4-methoxy-TEMPO catalyzed aerobic oxidative synthesis of 2-substituted benzoxazoles, benzthiazoles and benzimidazoles 97 [97]. A typical reaction involved 5 mol % of the catalyst heated at 120 °C in oxygen atmosphere with xylene as solvent (Scheme 37). The substrates involved substituted 2-aminobenzophenol, 2-aminobenzothiophenol and o-phenyldiamines. A variety of functionalities, e.g., electron-withdrawing or electrondonating, were well tolerated as exemplified by the formation of the desired products 97 in yields of 20-95%.
A plausible mechanism was demonstrated with substituted 2-aminophenol (Scheme 38). Accordingly the reaction is believed to have initiated by the formation of imine intermediate V. The 4-methoxy-TEMPO radical interacted with V and subsequent H-absorption from the phenol moiety afforded phenoxy radical W and 4-methoxy-TEMPOH which gets re-oxidized to the 4-methoxy-TEMPO radical by oxygen. W gets stabilized by the imine moiety to form the corresponding amine radical X′′. The second hydrogen abstraction between X′′ and 4-methoxy TEMPO/oxygen facilitates the aromatization to afford the desired compounds (Scheme 38).
In another example 4-hydroxy-TEMPO was used as a catalyst for the synthesis of 2-arylquinazolines 99 from a one-pot reaction involving arylmethamines with 2-aminophenylketones 98 or aldehydes in the presence of oxygen (Scheme 39) [98]. Diversely substituted 2-arylquinazolines were synthesized in moderate to excellent yields.

Application of oxidative dehydrogenation in the syntheses of bioactive natural products and drug intermediates
The application of oxidative dehydrogenation in the syntheses of diverse heterocycles makes it a useful strategy for accessing heterocyclic natural products, drug intermediates and active pharmaceutical ingredients. The following section will describe a few of such efforts.
In 2013, Witt et al. reported a scalable process for the synthesis of GSK3B inhibitor AZD8926, 103 [99]. The drug is therapeu- tically useful for the treatment of CNS disorder viz. Alzheimer's disease (AD), Schizophrenia and other chronic and acute neurogenerative diseases [99]. This molecule reached the clinical development phase, consequently a safe, robust and economic scale-up process was investigated by the researcher as the original process was incompatible towards scale-up. The investigation indeed provided a better scale-up process, where the key reaction, a Zeigler coupling, of an early trifluoromethylimidazole intermediate 100 with commercially available 2-chloro-5-fluoropyrimidine afforded 101 (a compound with partially saturated pyrimidine framework). An aerobic oxidative dehydrogenation of 101 in the presence of molecular oxygen and with catalytic copper acetate (Cu(OAc) 2 ) generated the desired pyrimidine 102 which was converted to the final products in a few more steps. This is one of the noteworthy examples where oxidative dehydrogenation has been utilized for the synthesis of a key intermediate of an active pharmaceutical ingredient (API). This further establishes oxidative dehydrogenation as an impactful strategy in the repertoire of organic synthesis (Scheme 40).
The next example demonstrates the process of oxidative dehydrogenation in the synthesis of bioactive natural products. Accordingly, Stahl et al. utilized a modular catalytic system comprised of C-quinones for the oxidative dehydrogenation of tetrahydroquinolines 104 to an (2,1-c)quinoline 105. This was further transformed to 106, an antiprotozoal agent, and 107, a topoisomerase inhibitor, presently in the phase II clinical trial (Scheme 41). The catalytic system comprised of an octahedral [Ru(phd) 3 ] 2+ catalyst along with cobalt-N,N´-bis(salicylidene)-1,2-phenylenediamine [Co(Salophen)] as a redox co-catalyst. The reaction occurs aerobically under mild conditions (Scheme 41) [100].
Our final example demonstrated the utility of oxidative dehydrogenation in the synthesis of β-carboline natural products norharmine (111), harmane (112) and eudistomin U (113) [101]. The general synthetic scheme involved the synthesis of the respective tetrahydro-β-carboline precursors of the said natural products by Pictet-Spengler reaction of tryptophan derivatives with appropriate aldehydes. A hypervalent iodine reagent, iodobenzene diacetate was used in stoichiometric quantities to facilitate both oxidative decarboxylation/dehydrogenation of 108-110 to afford the desired natural products 111-113 (Scheme 42).

Conclusion
Substantial amount of research has been performed in the last decade demonstrating the efficiency of oxidative dehydrogenation of heterocycles as an effective pathway to access various heteroaromatics. The quantum of publications has increased in this direction where the strategy evolved from stoichiometric → Scheme 42: Iodobenzene diacetate-mediated synthesis of β-carboline natural products.
catalytic → organocatalytic. Diverse oxidants such as NBS, DDQ, KMnO 4 , IBX, DIB and last but not least molecular oxygen have been used as an oxidant for this purpose. Recently bioinspired catalysts have also been developed. As discussed in this review, the processes afforded the desired compounds in moderate to excellent yields and are robust enough to be applied in the generation of natural products and synthetic drug intermediates. This review will serve as a compilation of the published methods where oxidative dehydrogenation is harnessed to generate various heteroarenes and we sincerely hope that this will arouse interest among medicinal and synthetic organic chemists to utilize this methodology to access them.