Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

A comprehensive account of recent advances in the synthesis of imidazopyridines, assisted through transition-metal-catalyzed multicomponent reactions, C–H activation/functionalization and coupling reactions are highlighted in this review article. The basic illustration of this review comprises of schemes with concise account of explanatory text. The schemes depict the reaction conditions along with a quick look into the mechanism involved to render a deep understanding of the catalytic role. At some instances optimizations of certain features have been illustrated through tables, i.e., selectivity of catalyst, loading of the catalyst and percentage yield with different substrates. Each of the reported examples has been rigorously analyzed for reacting substrates, reaction conditions and transition metals used as the catalyst. This review will be helpful to the chemists in understanding the challenges associated with the reported methods as well as the future possibilities, both in the choice of substrates and catalysts. This review would be quite appealing to a wider range of organic chemists in academia and industrial R&D sectors working in the field of heterocyclic syntheses. In a nutshell, this review will be a guiding torch to envisage: (i) the role of various transition metals in the domain dedicated towards method development and (ii) for the modifications needed thereof in the R&D sector.


Introduction
The structural diversity and biological importance of nitrogencontaining heterocycles have blossomed in the last many years. These heterocyclic scaffolds occupy a pivotal role in the realm of both natural products and synthetic organic chemistry. Their importance as precursors to many biologically active compounds has created a tremendous amount of focused attention on developing methods to functionalize these systems [1,2]. In one such context, imidazopyridines are one of the fascinating classes of fused N-heterocyclic scaffolds of versatile concern. Their chemistry has drawn substantial attention in last few years owing to their involvement in various medicinal applications viz., anti-inflammatory, anticancer, antibacterial, anxioselective and antiprotozoal [3][4][5]. Furthermore, a number of drugs embracing the imidazopyridine (IP) skeleton have been commercially marketed with their trade names as minodronic acid (for the treatment of osteoporosis), olprinone (for acute heart  ), zolpidem (for treatment of insomnia), zolimidine (antiulcer drug), alpidem and saripidem (anxiolytic agents) and some are under development, like GSK812397 (for the treatment of HIV), ND-09759 and Q203 (for tuberculosis) (Figure 1) [6][7][8][9][10].
During the writing of this review, we came across some reviews on IPs, however, their coverage is limited to the imidazo[1,2a]pyridine nucleus deriving from either a particular starting material or to one type of reaction procedure (particularly C-H activation) with literature up to 2015 [34][35][36][37][38][39]. This review covers a substantial time period of the literature, from the year 2006 to August 2018 (except for the reports mentioned under previously reported reviews), with state-of-the-art methodologies, and reflecting some of the changing approaches and challenges encountered in the field of catalytic synthetic chemistry.
The prime focus of this review is on the TM-catalyzed synthesis of differently fused IPs. In this review, a concise account on imidazopyridine (IP) syntheses has been documented for the benefit of the chemists working in the field. This will assist them in unraveling the possibilities for efficient synthesis of different IP derivatives supported by TMs as the catalysts. It will be of great help for them to consider this as ready reckoner of rich literature for TM-catalyzed IP syntheses and to help the chemists to understand some of the challenges associated with the reported methodologies. Amongst various reported TMs, the participation of copper as the catalyst has been used in the largest number of cases followed by the use of palladium, rhodium, and others. It has been further observed that lanthanum, scandium, and vanadium have been very seldomly used. An overview of the participation of various TMs is depicted in Figure 2.

The role of copper in synthetic chemistry
In comparison with other TMs copper-metal-based catalysts are cheap, nontoxic, abundant and environmentally benign [40]. Chemistry of Cu is extremely rich as it can exist in variable oxidation states (Cu(0), Cu(I), Cu(II), and Cu(III)). Copper has been known for a long time to act as a catalyst for cross-coupling reactions (Ullmann-Goldberg reaction), cyanation of aryl halides (Rosenmund-von Braun reaction), Hurtley reaction and intermolecular oxidative cyclization of haloalkynes [41][42][43][44]. Various copper salts have been used as Lewis acid in homogeneous catalysis. CuO nanoparticles (NPs) were used for C-N, C-S, C-O cross-coupling reactions and C-arylation. Recently, exploiting the cross-coupling tendency of CuO NPs, Reddy et al. have reported their use as a heterogeneous, recyclable catalyst in the N-arylation of indoles [45,46]. Copper catalysts have shown exceptional enantioselectivity for reactions such as hydrosilylation, hydroboration, and heterogeneous as well as homogeneous hydrogenation [47][48][49]. Also, the copper salts found used as oxidants in a number of organic reactions. In the syntheses of IPs, various forms of copper viz., salts, complexes, MOFs, oxides, and nanoparticles (NPs) have been used as the catalytic system in both multicomponent reactions (MCRs) as well as derivatization methodologies.

The role of palladium in synthetic chemistry
Pd-catalyzed cross-coupling reactions have laid down the foundation of new C-C bond formations [50,51]. A number of Pd-catalyzed organic reactions viz., C-N coupling, amination and intramolecular amidation, cyclization, and Suzuki-Miyaura coupling [52][53][54][55] have recently been reported in the literature. The Pd-catalyzed Sonogashira reaction has successfully constructed arylated internal alkynes that are important interme-diates in organic synthesis, molecular electronics and polymers [56]. C-N bond forming reactions between aryl halides and amines/amides/sulfonamides have been extensively studied in the past few years [57]. Recently, Buchwald and Castillo have reviewed the exceptional utility of Pd-catalyzed C-N cross-coupling reactions for the preparation of anilines and aniline derivatives [58]. In many of the reactions, palladium was used along with a co-catalyst to enhance its catalytic activity. It is revealed from the literature that next to the copper, palladium catalysts in the form of salts (with or without ligands), complexes, NPs, etc. find their usage on mass scale syntheses of IPs.

The role of zinc in synthetic chemistry
Zinc salts being inexpensive, environmentally benign, low in toxicity and fits to the tenets of green chemistry. Zinc in the form of its salts, complexes (chelated by mono/di/tri/tetradentate ligands), oxides and sulfides proved to be a promising and active catalyst for organic chemists in both homogeneous as well as heterogeneous reaction systems [23,59,60]. They have been employed for a number of organic reactions viz., hydrosilylation of aldehydes and ketones, acetylation reactions, redox reactions, oxidative esterification, etc. [61][62][63]. Thus, in concern with increasing demand for sustainable development, a growing number of catalytic systems based on zinc with excellent activity has been designed and used.

The role of iron in synthetic chemistry
Iron being the most abundant heavy element on earth with low biological toxicity along with cost economy and high reactivity was explored by Kharasch and Fields in the 1940s and Tamura and Kochi in 1970s in the field of catalysis [64,65]. Iron in the form of its salts, oxides, iron-NHC complexes, iron pincer complexes, ferrocenes and half sandwiched iron complexes found to be the center of attraction in the field of catalytic organic synthesis. Variable oxidation states of iron (-2 to +5) allow it to catalyze a number of organic reactions viz., nucleophilic substitutions, addition reactions, hydrogenations/hydrosilylations, cycloisomerizations, electrophilic aromatic substitutions, cross-coupling reactions, oxidative additions and reductive eliminations [66]. Iron-catalyzed C-H functionalization helped in the introduction of various organic groups to numerous substrates [67,68]. Recently attention has been diverted towards the use of magnetic NPs, in this context iron oxide played a pivotal role as a catalyst or as support for some homogeneous or other metal catalysts for the sake of easy recovery and reusability [69].

The role of rhodium in synthetic chemistry
Rhodium in the form of Wilkinsons catalyst [RhCl(PPh 3 ) 3 ] played a major role in the field of catalysis [70]. Rhodium is capable of catalyzing a number of organic reactions viz., heterocyclic alkylation and arylation with a high level of functional group compatibility, intramolecular alkylations, inter and intramolecular C-H bond activation and regio/stereoselective homocoupling of alkynes [71][72][73]. Group of Cho and Chang have unprecedentedly reported a Rh catalytic system for facile addition of heteroarenes to both alkenes and alkynes [74]. Rh(I)/ Rh(II)/Rh(III) catalysts have been used in asymmetric syntheses of chiral heterocycles that have been effectively reviewed by Chen and Xu in 2017 [75].

The role of ruthenium in synthetic chemistry
Over the past decade, Ru and its complexes were used as a catalyst in various organic processes and have attracted considerable interest in this regard. Ru has efficiently catalyzed C-H activation reactions for C-C bond formation, aza-Michael reactions and many more MCRs [27,76,77]. During the writing of this review, we came through the fact that ruthenium catalysts were mostly used for functionalization/ derivatization reactions compared to MCRs in the syntheses of IPs.

The role of lanthanum/scandium/nickel/ vanadium in synthetic chemistry
The application of scandium complexes in organic chemistry has been very scarce due to their low availability and difficulties in separation. This problem was resolved by the introduction of scandium triflate (Sc(OTf) 3 ) as a promising reusable Lewis acid in Diels-Alder reactions by Kobayashi [78]. However, in recent years scandium(III) trifluoromethanesulfonate (Sc(OTf) 3 ) has emerged as an efficient, mild, commercially available, inexpensive, water-tolerant Lewis acid catalyst in the formation of both carbon-carbon and carbon-heteroatom bonds, and thereby the formation of various biologically promising organic compounds [68]. Important advances in scandium-catalyzed chemistry include [4 + 2] and [2 + 2] cycloaddition reactions, Baeyer-Villiger reactions, epoxidations of alkenes, intramolecular ring expansions, hydroaminations, and amination reactions and carbonyl-ene reactions for the formation of C-C bond. Scandium-catalyzed reactions represented remarkable enantioselectivities [79][80][81]. Recently the group of Rani has developed fly ash-supported Sc(OTf) 3 for Friedal-Crafts acylation reaction, also the group of Fukuzawa has exploited Sc(OTf) 3 in the synthesis of N-substituted 1,4-DHPs [26,82].
Enhancement in reactivity and selectivity of many reactions, ability to polarize bonds upon coordination and thus altering their electrophilicity made lanthanides a catalyst of choice. Lanthanum complexes are widely used in synthetic chemistry for cycloadditions, reductions, benzimidazole syntheses, Biginelli reactions, hydrophosphinations of unsaturated substrates, double hydrophosphinylations of unactivated nitriles, Grignard additions, C-C bond formations, and ring opening reactions [83][84][85][86][87]. Along with these nickel and vanadium were also well known to catalyze a number of organic reactions. Recent reviews published on the catalytic applications of these metals in various forms have underlined the indispensable contribution in the field of TM catalysis [88]. Vanadium in the form of vanadium oxide and complexes has been reported to participate in numerous organic reactions including aerobic oxidation [89,90]. A report of Carsten Bolm has delineated the use of vanadium complexes in enantioselective oxidation of alcohols and asymmetric sulfide oxidation [91]. Diverse reactivity, cost efficiency and variable oxidation state [Ni(0)-Ni(IV)] associated with nickel led to remarkable developments in the field of catalytic applications [68]. Nickel catalysis involved cycloaddition, cyclization, C-H bond functionalization, and multicomponent coupling reactions [92,93].

Review Multicomponent reactions for the synthesis of imidazopyridines
One of the major challenges in organic synthesis is the creation of diverse and complex molecules from simple and readily available substrates. MCRs constitute one of the most efficient tools in modern synthetic chemistry, with high atom efficiency, quick and simple implementation, ecofriendliness and a diverse target-oriented synthesis [94]. In addition, both waste production and multistep problems resulting in the expenditure of human labor are significantly reduced. MCRs have been given much attention in various research fields, such as the discovery of lead compounds in medicinal chemistry, or combinatorial chemistry [95,96].
The reaction performed with CuI alone gave a moderate yield of the product (only 45%) whereas NaHSO 4 ·SiO 2 alone was unable to complete the reaction. Therefore, the synergistic effect of the CuI-NaHSO 4 ·SiO 2 system for successful completion of the reaction was proven under optimized conditions. (Scheme 2, A, B and C). In order to ascertain the mechanistic pathways, the reaction was performed in two different ways; in a first way, 2-APs 3 were allowed to react with aldehydes 1 in the presence of NaHSO 4 ·SiO 2 and the product obtained was refluxed with phenylacetylene (as terminal alkyne, 2) in the presence of CuI to obtain the product, however, in the second pathway, 1 and 2 were taken together in the presence of CuI and the product obtained was treated with 3 in the presence of NaHSO 4 ·SiO 2 to produce the desired IP. Both the routes resulted in the same final product without any substantial change in the yield. The generality of the reaction was studied with differently substituted 1, 3 and 2 having both electronwithdrawing (EW) and electron-donating groups (EDGs) at different positions on the phenyl ring. However, the use of aliphatic aldehydes such as 3-methylbutanal and cyclohexanecarbaldehyde and aliphatic acetylene viz., hex-1-yne resulted in a comparatively lower yield of 66, 70 and 60%, respectively.
Heteroaromatic aldehydes such as thiophene-2-carbaldehyde on the other hand resulted in appreciable yields under similar reaction conditions. The authors have successfully constructed a big library of 28 compounds with varying structure.
In 2013, Gao et al. have exploited the TM-catalyzed nucleophilic addition reactions of haloalkynes 5 followed by carbon-nitrogen bond formation, as an efficient methodology for the synthesis of 2-haloimidazopyridines 6 [44] The reaction was catalyzed by copper in an atmosphere of oxygen for approximately 12 h of reaction time. The major challenge before their developed protocol was to retain the reactive halide substituent in the product which was successfully overcome by this protocol along with the synthesis of pyrazines and pyrimidines in high yield (Scheme 3).
Furthermore, easy functionalization of the products from the viewpoint of reactive halide made them valuable synthons. Molecular oxygen used served the role of oxidant for generating a Cu(III) intermediate during the reaction. The absence of oxygen atmosphere gave the yield in a slightly lesser amount with increased loading of catalyst to almost 1 equivalent. This reaction avoided the use of any additive; moreover, the presence of bases in this methodology resulted in homocoupling of bromoalkynes. Among the examined Cu(I) and Cu(II) salts, Cu(OTf) 2 was proven to be the optimal one. Both EW and EDGs were well tolerated except 2-amino-6-methylpyridine which might be sterically hindered due to methyl group at 6-position. The use of aliphatic alkynes gave an optimal yield of the final product in  the range of 50-78%. Successful formation of the product on application of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO: a radical scavenger) has nullified the probability of radical pathway. It was thought to be initiated by the coordination of 2-AP to Cu(OTf) 2 , forming an intermediate 7, that was followed by migratory insertion by haloalkyne (Scheme 4). The organocopper species 8 thus formed would undergo deprotonation/oxidation and finally reductive elimination to give the cyclized product 6 (Scheme 4). Along with the unprecedented intermolecular oxidative diamination of haloalkynes, mild reaction conditions and efficient conversion of the alkyl-substituted haloalkynes to the halogenated product were great improvements over existing methods. Stimulated by the work of Luz et al. [98] and Phan et al. [99] with Cu(BDC)MOF (BDC: 1,4benzenedicarboxylate), Puthiaraj and co-workers have unprecedently discovered the catalytic activity of this metal-organic framework (MOF) for the synthesis of imidazo[1,2-a]pyridines [100]. The three-component, one-pot reaction between 1, 3 and nitromethane (10, Scheme 5) involved an intermolecular aza-Michael addition with a subsequent intramolecular cyclization catalyzed by Cu(BDC)MOF. Further, the LC-MS study of the reaction mixture has shown the imine formation to be the major pathway rather than β-nitrostyrene. The reaction involved a two-step reaction mechanism in which aza-Michael adduct 13 was formed in the first step which was converted to the final product via radical cation intermediate 17 in the second step (Scheme 6). This additive-free approach offered an easy separation and reusability of heterogeneous catalyst along with the use of air as environmentally benign oxidant.
The use of zinc and iron MOFs have resulted in lesser yield than Cu-MOF. The reaction has well tolerated different substituent on the reactants except for 4-NO 2 ; 3,4-dichlorobenzaldehyde, 2-aminopyrimidine, and 2,4,6-triamino-1,3,5-triazine which failed to give the desired product. Also, benzaldehydes substituted with EDGs at p-and m-positions gave a higher yield than sterically hindered o-substituents and EWGs. Moreover, the absence of metal leaching as tested by atomic absorption spectroscopy (AAS) demonstrated the heterogeneous nature of the used catalyst. Recently, a robust, ligand and additive-free heterogeneously catalyzed synthesis of imidazo[1,2-a]pyridines from 3 and ketones 20 has been reported (Scheme 7) [101]. Titania-supported CuCl 2 (CuCl 2 /nano TiO 2 ) played the role of catalyst in this transformation under aerobic conditions. Titania support helped in recyclability of the copper salt to four synthetic cycles without loss in activity. In addition to this, TiO 2 is more stable, abundant, nontoxic, and economical [102]. Out of different supports examined like Al 2 O 3 , ZrO 2 , CeO 2 , SiO 2 , Al-Ti, OMS-2, C, etc., TiO 2 was found to be the best for this transformation. Furthermore, a library of compounds was synthesized considering ketones having ED and EWGs, with sensitive -NO 2 groups along with heteroaromatic ketones as well as α,β-unsaturated ketones. Differently substituted compound 3 (except -NO 2 substitution) gave moderate to good yields (55-84%). Moreover, the protocol has demonstrated the successful synthesis of drug zolimidine on a gram scale. The mandatory role of oxygen or air as an oxidant for this reaction was proved by reaction failure under the nitrogen atmosphere. This synthesis ruled out the possibility of Ortoleva-King reaction under these conditions as the use of a catalytic amount of iodine in the absence of copper did not result in the desired product keeping the reaction conditions intact. However, based on control experiments and the works of Zhang and Ma's group [103,104], oxidative C-H functionalization was expected to be more likely involved in the cyclization strategy (Scheme 8).
Heterogenization of organic catalysts on Fe 3 O 4 NPs has attracted much attention as these catalysts can be recovered by an external magnetic field and reused in subsequent reactions. Some metal complexes of 2,2-biimidazole (H 2 Biim) found to be effective catalysts in many organic transformations [105,106]. Inspired from the history of IP synthesis Tajbakhsh et al. have utilized the biimidazole Cu(I) complex supported on magnetic Fe 3 O 4 (MNP@BiimCu) as a heterogenous catalyst for the synthesis of imidazo[1,2-a]pyridine in an aqueous medium (Scheme 9) [107]. By their approach, they have avoided the use of toxic reagents and solvents, harsh reaction conditions and long reaction times. The use of a heterogeneous catalyst and water made this method a green and sustainable approach for organic transformations.
This transformation involved the well known three-component reaction of 3 with 1 and 2 in an aqueous medium (Scheme 9). In order to increase the solubility of reactants in aqueous medium cationic surfactant (cetyl trimethylammonium bromide: CTAB) has been used which has also increased the yield of the product. Aliphatic aldehydes resulted in lower yields (65 and 76%) whereas dimethylamino-or nitro-substituted aldehydes did not result in the target compound that might be due to the deactiva-tion caused by coordination of these groups with the catalyst. Metal-carbene complexes attracted the attention of organic chemists and have become an important branch of organometallic chemistry. Recently in 2014, metal-carbene complexes have been used as catalysts for the synthesis of imidazo[1,2a]pyridines, via Cu(I) and Pd(II)-catalyzed cyclization (Scheme 10) [108]. The remarkable feature of this report was the metal carbene complex-catalyzed, one-pot process for the formation of C=O and C=C bonds to prepare functionalized imidazo [1,2-a]pyridines. Screening of the reaction conditions has proven the CuI-bipyridine (bipy) combination as the best catalyst-ligand symbiosis for this transformation at room temperature. In this synthesis, temperature and atmosphere both played the decisive role in product yield, as the reaction carried out at higher temperatures and under anaerobic atmosphere resulted in a trace amount of product. Differently substituted 2-aminopyridines 3 along with aryl and alkyl as well as terminal propiolaldehydes 25 were well tolerated.
The yield was >70% except for the products of 3-methyl-and 5-methyl-2-AP with propiolaldehyde. The protocol has also demonstrated a novel Pd(OAc)-catalyzed synthesis of 3-vinylimidazo[1,2-a]pyridines via 1,2-H shift of Pd-carbene complexes. This methodology has been considered as an efficient, one-pot regiospecific synthesis for a number of biologically active imidazo[1,2-a] pyridine derivatives [108]. Encouraged by the direct synthetic strategies for imidazo [1,2- [109]. Their use of vinyl azide derivatives 29 for the synthesis of IPs was unprecedented. In this strategy, vinyl azide acts as a source of nitrogen with the liberation of N 2 as a benign byproduct under aerobic and mild reaction conditions (Scheme 11). The protocol has surpassed the use of 2-AP as one of the mostly used reactants and replaced it with pyridine 28.
The reaction proceeded through both radical and ionic pathways, yielding the products in moderate to good yields. The ionic pathway was similar to that reported by Yu et al. [110] on the other hand the radical pathway was supposed to occur as shown in Scheme 12. This involved generation of iminyl radical intermediate 31 by homolytic cleavage of the C-N bond which was followed by reductive elimination and oxidation to yield final compound 21. Inspired by the work of Wang et al. [15] who have exploited a Cu(II)-catalyst for the construction of pyrido[1,2-a]benzimidazoles Li and Xie have described a Cu(I)-catalyzed direct transannulation of N-heteroaryl aldehydes/ketones 36a,b with aryl/alkylamines 35 to form imidazo[1,5-a]pyridines 37 [11]. They have utilized aerial oxygen as a greener oxidant for oxidation during the reaction (Scheme 13). Mechanistically, the reaction involved the formation of radical intermediates, as use of TEMPO inhibited intramolecular C(sp 3 )-H amination of imine species. Aerial oxidation of the Cu(I) species bonded to the N-atom of pyridine and imine 39 resulted in Cu(II) superoxo radical intermediate 40.
This was followed by intramolecular hydrogen abstraction from the sp 3 carbon atom leading to the formation of six-membered Cu(III) species 42. Furthermore, consecutive isomerization/oxidation/reductive elimination leads to the generation of final compound 37 with regeneration of the Cu(I) catalyst (Scheme 14).
The presence of EDGs as compared to EWGs on N-heteroaryls gave a good yield. On the other hand, benzylamine has well tolerated both the EW and EDGs to give the products in appreciable yields. Moreover, various aliphatic amines irrespective of their steric hinderance resulted in appreciable yields of the product. Inspired from the excellent catalytic activity exhibited by Cu(0) NPs Chenglong et al. have reported an efficient, threecomponent one-pot reaction for the synthesis of imidazo [1,2a]pyridines [111]. The protocol enjoyed a solvent-free domino reaction between compounds 3, 1 and 2 under nitrogen atmosphere at 120 °C (Scheme 15). However, the reaction was unsuccessful with aliphatic and low-boiling aldehydes (as the reaction was taking place at high temperature). The reaction mechanism involved a Cu-NPs-mediated C-H bond activation of the alkyne which further reacted with the iminium ion to form propargylamine 45 and Cu NPs were again released into the system. The propargylamine formed went through 5-exo-dig cyclization to form IPs (Scheme 16). An unprecedented CuIcatalyzed two-component synthesis of isoxazolylimidazo[1,2a]pyridines 49 was reported by the group of Rajanarendar under aerial conditions. Differently substituted 2-AP 3 and substituted nitrostyrylisoxazole 48 were used as reaction substrates at 80 °C (Scheme 17) [112]. The method has tolerated a variety of functional groups with good yield. Moreover, highly functional- ized imidazo[1,2-a]pyridines have been synthesized by applying a Sonogashira coupling reaction to the product of 4-bromo-substituted nitrostyrylisoxazole 48a (Scheme 18). The attractive feature was successful substitution of the bromo atom with terminal alkynes. Different alkynes applied gave a good yield of up to 81%. This reaction provided a direct and efficient method to produce highly functionalized imidazo [1,2a]pyridines.
Mechanistically, the reaction proceeded by Michael type addition of 2-AP and nitrostyryl isoxazole. Further, a CuI-promoted one-electron oxidation followed by loss of a hydrogen radical and a proton, led to the formation of enamine 55. The so formed enamine underwent single-electron transfer (SET) with CuI fol-lowed by hydride abstraction/intramolecular nucleophilic addition and loss of a proton forming the desired compound 49 (Scheme 19).
Cu(I)-catalyzed intramolecular oxidative C-H amidation of N-pyridylenaminones 61 for the synthesis of imidazo[1,2a]pyridine derivatives have been reported by the group of R. K. Reddy [113]. The protocol offered an open air, ligandand base-free methodology with an extension towards the synthesis of imidazo [ formamide (DMF) at 100 °C under air would be the best conditions for a maximum yield. The reaction viability was also tested without the isolation of product 61 in a one-pot fashion, by reacting 2-AP 3 and 1,3-diphenylprop-2-yn-1-one 60 under the given conditions. This one-pot methodology provided the final product with a yield of 50% (Scheme 21). For pyridine synthesis, both N-pyridyl as well as enone fragment have well tolerated a large number of functional groups. Also, the effect of steric congestion has been nullified as the product yield was up to 95%. Mechanistically, an intermediate complex was EWGs on aldehydes gave a high yield of the product whereas the yield was decreased with EDGs (2,4-OMe, 4-Me, 5-Br, 5-Me and 4-Et ≤37%). Also, the reaction of unsubstituted benzaldehyde with substituted 2-AP gave poor yields (5-Cl, 5-Me; 14 and 23%, respectively) whereas no target compound was synthesized with unsubstituted 2-AP 3.
This methodology also provides a simple and concise route for the synthesis of the anxiolytic drug alpidem. The use of a Cu(I) catalyst was not fruitful for this synthesis. This might be due to   The reason behind the use of an ionic liquid as reaction medium was its environmentally benign nature, air stability and significantly its compatibility with various organic compounds.
This reaction was first of its kind in using pyridine-2(1H)-ones (precursor of 2-AP) directly for the synthesis of IPs. The generality of the present protocol lied in tolerance towards differently substituted reacting compounds. Acetophenones bearing EWGs reacted faster than those with EDGs as these groups might be unfavorable for the nucleophilic addition step during the reaction (Figure 3). The advantageous point of the protocol  involves the recovery and reusability of the copper catalyst dissolved in ionic liquid to four synthetic cycles.
Nanotechnology coupled with heterogeneous catalysis has emerged as an efficient field of catalysis for various organic transformations. Inspired from this Bagdi et al. have reported a nano-copper oxide-mediated three-component A 3 coupling reaction for the synthesis of 2-triazolylimidazo[1,2-a]pyridine 74 (Scheme 26) [31].
The reaction involved the use of copper oxide as a catalyst and sodium ascorbate as a reducing agent using triazolyl aldehyde 73, amidine 3 and terminal alkynes 2 as reaction substrates at 70 °C (Scheme 26). Here sodium ascorbate (NaOAs) helped in the reduction of Cu(II) to Cu(I) which then reacted with the alkyne moiety. The species thus formed participated in the reaction by reacting with imine of aldehyde and amidine. The intermediate thus formed undergo 5-exo-dig cyclization and 1,3-H shift to form the final product. This was an unprecedented report for the synthesis of a library of targeted moieties using a nano-click catalyst. The triazole precursor was also synthesized by the group using nano-copper oxide in an aqueous medium. The reaction has well tolerated variedly substituted starting materials whether aromatic or aliphatic, only in case of triazoles substituted with an acetate group the final product was obtained in 66% yield. An open-flask, one-pot, Cu(II)-catalyzed ligand-free approach towards C-N bond formation was reported by Rasheed et al. [116]. The reaction was catalyzed by Cu(OAc) 2 with cesium carbonate as a base under aerobic conditions. Along with the synthesis of pyrido[1,2-a]benzimidazoles 78, they have reported the synthesis of benzimidazo[1,2a]quinoline 79 and benzimidazo[1,2-a]isoquinoline 80 in good to excellent yields. They have used differently substituted arylboronic acids 77 as one of the common reactants with 2-aminopyridines/2-aminoquinolines/1-aminoisoquinolines 3, 75, 76 to give the desired products, respectively (Scheme 27).
Both EWGs and EDGs on the reactants resulted in good to excellent yields of the product. This process followed two types of coupling reaction mechanisms, i.e., a Chan-Lam coupling and an Ullmann coupling. The Chan-Lam coupling involved a C-N bond formation (intermediate I, 84) which then entered into the Ullmann coupling to undergo intramolecular cyclization to form final product 78 and release Cu(III) to Cu(I) by reductive elimination. In this process oxygen (air) acts as oxidant which resulted in the oxidation of Cu(II) to Cu(III) and Cu(I) back to Cu(II) (Scheme 28).
A copper-catalyzed oxidative cyclization approach has been used for the synthesis of formyl-substituted imidazo[1,2a]pyridines 89. The remarkable feature of this method was the preservance of the sensitive aldehyde group in the product structure, which can act as a precursor for the synthesis of some new motifs (Scheme 29) [117]. The reaction was carried out between 2-APs 3 and cinnamaldehyde derivatives 88 under aerobic conditions. ZnCl 2 and pyridine act as additives, where ZnCl 2 was supposed to promote the reaction rate by coordinating with the oxygen of the aldehyde. 2-APs with EWGs gave a higher yield of products than those substituted with EDGs while this thing got reversed with cinnamaldehyde (Table 1). 2-Methylbenzaldehyde and 5-chloro-2-aminopyridine resulted promoted the formation of iodo-intermediate 98 with a carbonyl compound that underwent nucleophilic substitution with 2-AP 3. CuO played multiple roles in this reaction. Firstly it acts as an oxidizing agent to convert molecular iodine to the reactive iodonium ion (I + ) species, secondly as a weak base to neutralize HI and next to reoxidize the iodide ion (I − ) to molecular iodine (I 2 , Scheme 33). The reaction has enjoyed a broad substrate scope including arylmethyl, heteroaryl, α,β-unsaturated methyl ketones, β-ketone esters and 2-APs-substituted with EW and EDGs. The protocol also provided a concise route for the synthesis of the antiulcer drug zolimidine in 95% yield. A three-component coupling reaction (3-CCR) for the synthesis of N-fused pyridines was reported by Balijapalli and Iyer [40]. The reaction was catalyzed by CuO/CuAl 2 O 4 and ᴅ-glucose. The reaction had been tried with various Cu(I)-and Cu(II)-based catalysts but the use of a mixed nano-CuO/ CuAl 2 O 4 and ᴅ-glucose system has resulted in appreciable yields. This three-component one-pot reaction involved 2-AP, phenylacetylene and substituted benzaldehydes as the starting substrates (Scheme 34).  The reaction mechanism comprises of an in situ generation of the imine from the aldehyde and 2-AP. Further, the addition of alkyne and activation by CuO(II)/Cu 2 O(I) yielded the A 3 -coupled propargyl amine [40]. Tautomerization/5-exo-dig cyclization led to the formation of the final product. The reaction enjoyed a rich library of compounds with good yields except 5-bromo, 4-methyl and 3-methyl substitution on 2-AP with 41, 45 and 49% yield, respectively. Meng et al. have used copper supported on manganese oxide-based octahedral molecular sieves OMS-2 (CuO x /OMS-2) as a heterogeneous catalytic system for a tandem synthesis of 3-iodoimidazo[1,2-a]pyridines (Scheme 35) [120]. The synthesis was similar to that reported by Kumar and co-workers with the difference of a heterogeneous catalytic system and iodination of the product [121]. Molecular iodine was used as an iodinating agent in the reaction.
In this reaction, OMS-2 acted as support and an electron transfer mediator for copper in order to generate a low energy pathway for rapid electron transfer thereby minimizing the catalyst loading ( Figure 4). The reaction was supposed to proceed through iodine-catalyzed Ortoleva-King reaction with the assistance of Cu followed by CuO x /OMS-2-catalyzed electrophilic oxidative iodination.
The importance of catalyst for iodination was ascertained by the reaction in Scheme 36, which depicted that absence of CuO x /OMS-2 leads to imidazo[1,2-a]pyridine 21 as the major product rather than 3-iodo derivative 101. The reaction has well tolerated differently substituted ketones, with lack of product in case of ortho-substitution due to steric hinderance. Similarly, substituted 2-APs provided a library of compounds with god yield, however, α,β-unsaturated ketones, such as benzalacetone, did not afford any desired product, perhaps because the α,β-unsaturated double bond affected the iodination.
Mohan et al. successfully developed an efficient copper-catalyzed aerobic oxidative amination of C(sp 3 )-H bonds to synthesize imidazo[1,5-a]pyridine derivatives [122]. The reaction was also applicable to amino acid derivatives, as ethyl glycinate resulted in a 53% yield of the corresponding IP. The method was more atom economic and sustainable than others as it utilized air as a sole oxidant and generated water as the only byproduct. The reaction was carried out between pyridyl esters 102 and benzylamine (35)  in oxygen (balloon) atmosphere, might be due to the conversion of benzylamine to imine.
The reaction has beautifully tolerated a huge number of substrates with differently substituted pyridyl esters along with aromatic/heteroaromatic/aliphatic amines to give a good yield of products. However, steric hinderance was observed with 2-OMe-substituted benzylamine giving a trace amount of product. Moreover, 2-(pyridine-2-yl)acetonitrile and 2-picolylamine did not produce the desired product. The reaction with secondary amines 35a also resulted in a trace of the final product (Scheme 38).
The use of TEMPO (a radical scavenger) has shown that the reaction might proceed through a radical pathway as depicted in Scheme 39. In the presence of TEMPO the desired product was not formed. Atmospheric oxygen has oxidized Cu(I) to Cu(II). This Cu(II) acts as an initiator for a single electron transfer (SET) process, to proceed the reaction with benzylamine. A regioselective synthesis of imidazo [1,2-a]pyridines was reported by the group of Kamal and Reddy [123]. They have performed a Cu(OAc) 2 -Et 3 N-mediated coupling reaction of α-azido ketones 115 with pyridinium ylides 114 using oxygen as a green oxidant (Scheme 40). The oxo-functionality present in α-azido ketones increased its acidity thus making it a good organic synthon. Optimization of the reaction conditions revealed that the presence of copper salt is mandatory for the formation of the fused heterocycle as its absence resulted in the formation of the enaminone only. The imines 118, generated in situ via the loss of nitrogen from azide derivatives, were found to be reactive towards 1,3-dipoles 117 to form diverse heterocycles. Pyridinium ylides used as 1,3-dipoles in this protocol were synthesized by the reaction of pyridines with α-bromo ketones (Scheme 41). The protocol was applicable to a series of EW and EDGs on phenacyl azides. However, the reaction was not successful with ethyl azidoacetate. On the other hand, EW and EDGs were also well tolerated by pyridinium ylides.
The group of Bharate and Abbat have successfully reported a simple, efficient and excellent C-N bond formation catalyzed by CuBr [124]. The protocol involved the aerobic oxidative coupling of 2-APs with cinnamaldehyde to form 3-formyl-2phenylimidazo[1,2-a]pyridines (Table 2). Before their work, only three reports of such a formylation have been reported in the literature which suffered from certain drawbacks like difficult to prepare starting materials, multistep reaction, high temperature and the use of expensive catalyst [125][126][127]. The reaction was initially tried with different catalysts like triflic acid, I 2 , salts of Pd, Fe, Co and Cu which did not lead to the formation of the final product except CuSO 4 and CuCl 2 which gave a moderate yield of the products. Further studies revealed CuBr to be the most effective with a maximum yield of 90% in ethanol at 60 °C with optimization reaction between 2-AP and cinnamaldehyde ( Table 2, entry 1).
The reaction was carried out successfully under an air atmosphere rather than an inert atmosphere of nitrogen. This might be due to the oxidative nature of oxygen present in the air which was thought to be involved in hydrogen abstraction and oxidation of CuBr to Cu 2 O.
The presence of EW and EDGs on both 2-APs and cinnamaldehyde supported the forward reaction whereas the reaction got failed with aliphatic aldehydes. The reaction mechanism involved the formation of radical intermediates and Cu 2 O as a byproduct which was marked by the change of color from initial green to red. The theoretical study was carried out to check the feasibility of the reaction by calculating Gibbs free energy difference for each step (Scheme 42). The capability of copper to catalyze the cyanation reaction was well exploited by Wen and Lu for a one-pot MCR for the synthesis of cyanoimidazo[1,2a]pyridines 129 [128]. A variety of copper salts including CuI, CuBr, CuCl, Cu(OAc) 2 and Cu 2 O were tried but only CuI gave some appreciable results. The product yield was improved by using N-methyl-2-pyrrolidone (NMP) as a solvent without any additive (Scheme 43). A good yield of the product was obtained by using benzyl cyanide substituted with EDG (4-OMe) rather than with an EWG due to the favourable oxidative release of cyanide anions from benzyl cyanide that favored the substitution of the iodide ion. Substituted aryl ketones, heteroaryl methyl ketones, and α,β-unsaturated methyl ketones were also well tolerated by the reaction (Scheme 44). The reaction was also successful in a two-step procedure in which the product of 2-AP and ketone can also be subjected to cyanation with benzyl cyanide thereby proving the viability of the reaction. In this reaction, benzyl cyanide was used as the source of cyanide ions. Mechanistically the reaction involved the simultaneous release of cyanide ions and the α-iodination of acetophenone catalyzed by CuI. Further, the Ortoleva-King reaction of the iodinated ketone 130 intermediate took place with 2-AP to afford imidazo[1,2-a]pyridine followed by iodination and cyanation to yield the final product 129 (Scheme 45). This method was superior in terms of high conversion yields, the formation of C-N bonds and C-CN bond in a concerted manner. Moreover, this approach was found to have commercial value since it is a good synthetic procedure for the synthesis of the drugs saripidem and necopidem in 62% and 59% yields, respectively. Cu supported on Zinc aluminate (ZnAl 2 O 4 ) was unprecedentedly used for the three-component coupling reaction of aromatic aldehydes, 2-AP and phenylacetylene under nitrogen atmosphere (Table 3) [20]. In this protocol Cu was the active synthetic site and ZnAl 2 O 4 acted as a support to provide a larger surface area and reduced the aggregation of Cu NPs. This protocol was better than reported by Chenglong et al. [111] in terms of low reaction temperature and lesser reaction time.
Leaching of the metal ion was absent as tested by AAS, which ensured the recyclability of the catalyst to 5 synthetic cycles. Mechanistically the reaction proceeded by a nucleophilic attack of the alkyne on imine 133, resulting in the formation of propargylamine 134. The activation of the C-H bond in the alkyne by copper on ZnAl 2 O 4 initiated an intramolecular nucleophilic attack of pyridine nitrogen to the triple bond (135). This was followed by aromatic isomerization to form imidazo[1,2-a]pyridines (Scheme 46). The importance of Cu for this reaction is mentioned in Table 4, where the absence of copper did not lead to the product formation (  [129]. The synthesis of this moiety was also reported by the group of Gao in 2013, but it has the disadvantage of using special halogenating reagents for the synthesis of haloalkynes and also the tedious work-up procedure associated with it [44]. Application of another iodinating reagent like NIS proved to be futile under the reported conditions and also the absence of either CuI or I 2 from the reaction did not result in the product formation.  All the reactions were performed under an oxygen atmosphere. Differently substituted 2-APs and terminal alkynes resulted in an appreciable yield of the product except 6-methyl-substituted 2-AP which did not form any product possibly due to steric hinderance. The advantageous part of this protocol was the synthesis of active pharmaceutical ingredients (API) that could be converted to commercial drugs sarpidem and nicopidem. Also, Scheme 48: Application towards different coupling reactions.

Scheme 49: Reaction mechanism.
the compounds synthesized by this methodology could be successfully subjected to Suzuki, Sonogashira and Heck coupling reactions (Scheme 48).
The reaction proceeded by the formation of 1-iodoalkyne 142 which was characterized by mass and 1 H NMR spetra. This iodoalkyne then formed a complex of Cu(I) with 2-AP. This was followed by migratory insertion of haloalkyne to form reactive Cu(III) intermediate 144 which underwent reductive elimination to give the desired product 137 and Cu(I) species (Scheme 49). The mechanism has shown that molecular iodine (I 2 ) used in the reaction was the source of iodine in the final product rather than CuI. A condensation-cyclization reaction between 2-benzoylpyridine (145) and different benzylamines was carried out to synthesize 1,3-diarylated imidazo[1,5a]pyridines (Scheme 50). The reaction took place under aerobic conditions utilizing Cu-MOF-74 as a catalyst [130]. The reaction was unprecedented in terms of oxidative amination of C(sp 3 )-H bond catalyzed by Cu-MOF-74. The group of Nguyen have deeply investigated the reaction and found 10 mol % loading of the catalyst with 3 equiv of benzylamine and 0.2 M 2-benzoylpyridine to be optimal for appreciable yield (Scheme 51). The reaction was optimized with different salts and Cu(OAc) 2 was found to be effective for this transformation with a 78% yield, but it lacked reusability. They have experimentally demonstrated the importance of solid Cu-MOF for the reaction as there was not any contribution of leached active copper species to the formation of the desired compounds.  ortho-substituents gave lesser yields, possibly due to steric hinderance (Scheme 52). The advantageous feature of the process lied in the absence of base and ligand which makes it cost-efficient.
Cheng et al. have reported a Cu(II)-Pybox-catalyzed reaction between 2-aminopyridines (2-APs) and propargyl alcohol derivatives bearing terminal alkyne substrates 148 to synthesize imidazo[1,2-a]pyridines (Scheme 54) [132]. The Pybox ligand was introduced by Nishiyama in the year 1989 [133]. The ligand consists of a pyridine ring surrounded by two oxazoline groups. Pybox ligands have the merit of the big binding site which could complex even with lanthanide cations and the increased rigidity associated with the tridentate Pybox scaffold [134]. 2-APs with EDGs like methyl and methoxy substitution at either meta or para-position gave good yield in relatively shorter reaction time (6 h) than those with EWGs like Cl/Br or CF 3 (18 h). Moreover, the presence of EW/EDGs at 6-position of 2-AP did not afford the desired product due to the steric effect. In the case of propargyl alcohol derivatives, those with aliphatic substituent did not lead to the desired product. This reaction strategy has worked well up to gram scale level.
This reaction protocol has avoided the harsh reaction conditions like the use of high temperature and polar-aprotic solvents of a high boiling point such as DMF and DMSO. The added advantage of the method was regioselective propargylation at pyridine nitrogen 151, followed by an intramolecular cyclization catalyzed by Cu-Pybox complex 152 (Scheme 55). Furthermore, the reaction was also utilized for gram scale synthesis of 2-methyl-3-phenyl-2,3-dihydroimidazo[1,2-a]pyridine, followed by its bromination and nucleophillic coupling for further derivatization. Xie et al. have reported a novel methodology via amination of the C(sp 3 )-H bond with TMSN 3 , catalyzed by Cu(II) salt to form imidazo[1,5-a]pyridines [135]. This three-component reaction involved benzyl-substituted N-heterocycles 154, aldehydes 1 and TMSN 3 155 (Scheme 56), where heterocyclic nitrogen acted as both a directing group and an intramolecular nucleophile. The reaction was carried out under an inert atmosphere of argon with a total of 4 equiv of TMSN 3 (3 + 1) to obtain the maximum yield of the desired product. Differently substituted benzaldehydes have been examined which showed good tolerance to EW as well as EDGs present at different positions. However, aliphatic aldehydes were failed to produce the desired product. Also, 2-benzylpyridines with EDGs afforded the product in higher yield than those substituted with EWGs. Other than pyridines this methodology gave good results with 2-benzylthiazole, 2-benzylbenzoxazole, and isoquinolines (Scheme 57).
The authors were not sure about the exact mechanism thus based on previous reports it was believed to be propagated by the coordination of Cu(II) with the pyridinyl nitrogen 158 that facilitated deprotonation by the pivaloate anion to give an intermediate 159 [136,137]. This intermediate then involved the replacement of TFA by the azido group. The reaction was then expected to follow C-N bond formation, condensation with aldehydes, cycloaddition and finally, oxidative aromatization by Cu(II) to produce the desired product (Scheme 58). The C-N cross-coupling activity of copper was utilized by the group of Wan and Hu who have described a novel route for the synthesis of 2-unsubstituted imidazo[1,2-a]pyridines via intramolecular C-N bond forming cross-coupling reaction [138]. The reaction involved a copper-catalyzed C(sp 2 )-H amination. The reaction was carried out with N-pyridinyl secondary enaminones  PEG-400 which was found to be an optimal solvent for the reaction. A similar reaction was reported initially by the group of Yan and Yan who have utilized CuBr as a catalyst at 80 °C under aerobic conditions (Scheme 63) [143]. This reaction has tolerated a limited number of substituents where aldehydes with EDGs gave good yields as compared to EWGs, moreover, groups such as o-NO 2 , p-NO 2 , and CN resulted in a complex mixture and not the desired compounds. 2-APs also gave a similar outcome with a low yield of about 58% with the presence of an ortho substituent on it. However different 2-aminoheterocycles (2-aminopyrimidine/2-aminobenzimidazole) and aliphatic aldehydes viz., n-butyraldehyde and isobutyraldehyde were not found to be suitable substrates for this reaction. The reaction was thought to proceed via subsequent radical-cation intermediates, hydride abstraction and finally nucleophilic addition to give the desired product (Scheme 64). In the reported mechanism, the Cu catalyst was supposed to help in the formation of radical cation by taking up an electron in each of the two intermediate stages.
In order to develop an easy and economic method for regiodivergent synthesis of halosubstituted imidazo [ This strategy displayed high functional group tolerance at the aromatic ring of the enamides, however, aliphatic enamides were not found to be suitable. The presence of a furan and thiophene ring in place of the benzene ring gave a product yield of only 27 and 44%, respectively. EW as well as EDGs present at meta-position of pyridine, gave good results as compared to the methyl group present at o-and p-positions which did not result in product formation. The overall yield of the products in this reaction was not much appreciable, also the product of metamethyl-and meta-fluoro-substituted pyridines were obtained in an 1:1 isomeric mixture. Application of TEMPO (a radical scavenger) did not yield the desired product indicating the existence of a radical intermediate in the mechanism. This radical intermediate resulted in the formation of a carbocation which undergoes a nucleophilic attack by pyridine followed by isomerization of the so formed intermediate. The reaction then proceeded through a number of subsequent steps viz., intramolecular cycloaddition, hydrolysis, oxidative aromatization, and bromination thus yielding the final product. A copper/iodine co-catalytic system has been found to synthesize 1,3-diarylimidazo[1,5-a]pyridines 37 by decarboxylative cyclization of α-amino acids 194 with 2-benzoylpyridines 145 (Scheme 69) [146]. The reaction was supposed to obey an ionic pathway rather than a radical pathway. Mechanistically, decarboxylation step 196 was followed by oxidative iodination which was followed by elimination of iodine, intramolecular amination, dehydrogenation and rearrangement to yield the final product 37 (Scheme 70). tuted pyridines. However, with 3-methyl and 3-halo-substituted pyridines two regioisomers were obtained in each case where 8-substituted imidazopyridines were the major isomer.
This protocol was also successful in synthesizing the antiulcer drug zolimidine in 81% yield on 10 mmol scale. The group has proposed a tentative mechanism, where CuI was involved in the reduction of ketoxime ester to the iminium radical 210, which rapidly isomerized to the α-carbon radical. Subsequently, the radical formed get coupled with pyridine followed by intramolecular cyclization and oxidation in the presence of Cu/O 2 to generate the final product (Scheme 74).
An efficient copper-catalyzed four-component reaction was reported by Allahabadi et al. for the synthesis of imidazo[1,2a]pyridines [149]. The novelty of the methodology lied in their use of 2-bromopyridine as one of the starting reactants rather than 2-AP ( Table 5). Optimization of the reaction conditions has shown ʟ-proline to be the best out of different ligands used viz. 1,10-phenanthroline, pipecolic acid and ʟ-proline. To develop the best catalytic reaction conditions different copper salts were screened and CuI was found to be most effective using DMSO as solvent at 110 °C. The reaction mechanism involved Cu-catalyzed reductive amination of 2-bromopyridine with sodium azide to gave 2-AP. This 2-AP underwent imine formation with aldehyde which was followed by nucleophilic addition of the isocyanide. This step was followed by intramolecular cyclization 220 and tautomerization to produce the targeted molecule (Scheme 75). An unprecedented work for the synthesis of 2-haloimidazo[1,2-a]pyridines in terms of alkynoic acid as one of the reaction substrate was reported in the year 2017 by the group of Liu and Wang [150]. They have successfully reported the two-component, Cu(II)-promoted one-pot reaction of 2-AP and alkynoic acid 221 for the synthesis of IPs (Table 6). Before this report, three synthetic routes have been reported which suffered from certain bottlenecks like the use of prefunctionalized haloalkynes, limited substituent type at the C-3 position and limited halogenated starting material [44,129,144,151]. The two-component reaction did not require the presence of any base, as initial use of basic reagents like pyridine, Et 3 N, K 2 CO 3 or Cs 2 CO 3 resulted in a trace amount of final compounds. Moreover, the reaction did not proceed in the absence of CuBr 2 and also the use of NaBr as brominating agent (to reduce catalyst loading) did not give satisfactory results. Air or oxygen atmosphere was required for successful completion of the reaction whereas use of oxidants such as TBHP/DTBP resulted in a decrease in the product yield. Alkynoic acids were easier to handle than the corresponding terminal alkynes and haloalkynes, the reason is their high boiling point. The reaction was not affected by steric and electronic factors as a wide variety of substituents along with aliphatic acids resulted in moderate to good yields of the products.   Apart from copper bromide, its chloride salt also acted as good halogenating agent for synthesizing 2-chlorinated compounds (Table 7).
Control experiments performed for the reaction displayed that alkynoic acid formed a Cu(II) intermediate 224 with CuBr 2 followed by reductive elimination to generate an in situ bromoalkyne 226. Diamination of this bromoalkyne with 2-AP in the presence of CuBr 2 resulted in the final product (Scheme 76). These reaction conditions were also feasible for gram-scale synthesis.
A novel regio-and stereoselective approach for the synthesis of vinyloxy-IP 228 catalyzed by CuI has been reported. The reaction has utilized 2-APs, 2-oxoaldehydes 227 and alkynes as reactive substrate (Scheme 77). This methodology was success-ful only in the presence of Cu(I) salt and no reaction occurred in the presence of Cu(II) salts [152]. The library of compounds designed by this methodology was quite interesting as aliphatic/ aromatic/heteroaromatic alkynes substituted with both EW and EDGs were well tolerated under the optimized conditions. 2-AP moiety with EDGs (3-CH 3 /4-CH 3 ) gave excellent yields whereas EWGs (5- [155]. The synthesis involved the reaction between 2-APs and internal alkynes using copper triflate (Cu(OTf) 2 ) as catalyst.
The methodology involved an inverse regioselection for synthesizing IPs with amino functionality at C-3 position. Application of other copper salts did not give better results whereas no product was obtained with Cu(OAc) 2 . This synthesis was effective in air whereas the use of acid-base additives and other oxidants proved to be detrimental.
The reaction was successful with both electron-rich as well as electron-deficient arylynamides with moderate and good results, respectively. The reaction conditions were so versatile that the use of indole-tethered alkynes 237 and oxygen counterparts 239 of these internal alkynes, that are, ynol ethers, were also found to be effective with differently substituted 2-APs (Scheme 80). Among diversified products synthesized by this methodology, 2-APs with EWGs have not been reported. Mechanistically, copper was expected to be involved in the formation of Cu-ketenimine complex assisted by N-ynamide nucleophilic displacement (Scheme 81). This was followed by the formation of a 6-membered cuprous metallocycle 243 which undergoes reductive elimination of Cu(0) and led to the formation of the final product. Rao  The reaction was viable also with quinolin-2-amine and 3-aminopyridazine giving the product although in moderate and low yield, respectively. Inhibition of product formation on the application of TEMPO has revealed a radical pathway to be followed in the reaction (Scheme 83). Initially, 3° amine formed an immonium salt 245 that further gets converted to acetaldehyde (246) and formaldehyde (250), from the condensation of these two substrates formation of acrolein (251), took place. The acrolein thus formed reacted with 2-AP to form the target compound. This final conversion step operated through a radical pathway with the aid of a copper catalyst.  ration of the inexpensive starting materials into more complex heterocyclic structures with excellent yields.

Palladium-catalyzed synthetic protocols
A one-pot tandem amination and intramolecular amidative cyclization reaction for the synthesis of 3-arylated imidazopyridinones 260 was put forth by Scott from commercially available 3-amino-2-chloropyridine and anilines [53]. This methodology was quite similar to that reported previously by the group of McLaughlin, where a Pd(OAc) 2 -catalyzed cyclization of ureas was reported [54]. The amine group of 3-amino-2-chloropyridine was first protected (258) by carbamate group followed by TM-catalyzed amination of halide substituent with aniline 259. This was the first report on transition-metal-catalyzed amination of an aryl halide having carbamate protected amine in the ortho-position. The reaction utilized Pd 2 (dba) 3 as a precatalyst with XantPhos as most promising bidentate ligand for this Pd-catalyzed amination reaction. Refluxing tetrahydrofuran (THF) and toluene/iPrOH (4:1) found to be the best solvent systems (Scheme 85).
Aniline nucleophile has tolerated a wide range of both EW and EDGs with ortho, meta and para-substitution along with heterocyclic amines, although in the case of 2-methylaniline was formed in 49% yield, a significant level of intermediate remained even after 24 hours. The use of heterocyclic amine viz., 3-aminopyridine was effective whereas, 2-aminopyrazine was unreactive ( Figure 5). To perform the reaction in aqueous medium sodium lauryl sulfate was used as a phase transfer reagent, in the absence of which a noticeable decrease in the yield was observed (entry 8, Table 8). Presence of EWGs on aryl iodide such as -NO 2 , -Cl and -CN found to be essential for good yield whereas iodobenzene and p-iodoanisole could not afford the desired compound.
It is interesting to note that imidazo [4,5-b]pyridine derivatives behave as biological mimics for a number of benzimidazole scaffolds. This has increased the interest of scientific concern to develop a regioselective synthesis of its N-1-substituted derivatives. In this respect Rosenberg et al. have reported a facile syn-   [158]. The process was catalyzed by palladium in an inert atmosphere (Scheme 88). The methodology was very similar to that reported by the group of McLaughlin [54] with slight modification in product structure and conditions. Using this protocol two series of pyridines, for the synthesis of imidazo [4,5-b]pyridine-2-one were successful-ly synthesized. Xantphos was used as a ligand with Cs 2 CO 3 as a base in 1,4-dioxane and for imidazo [4,5-c]pyridine-2-one, dppb was used as a ligand with NaHCO 3 as a base in iPrOH as a solvent. Primary anilines used as one of the reactants delivered cyclized products in good yields except for o-substituted or moderately electron deficient aryl/heteroarylamines which resulted in a sluggish yield.
The previous work of Rosenberg et al. has certain limitations like the high cost of the biarylphosphine ligand, the ineffectiveness of electron-deficient benzyl moiety and incompatibility of unhindered chlorides [157]. Inspired from this Rosenberg et al. have described a palladium-catalyzed amidation reaction using XantPhos as a ligand to synthesize imidazo [4,5-b]pyridines (Scheme 89) [159].  The formation of the product faced competition with the pyridine byproduct 269 (Table 9). The use of protic solvents would minimize the byproduct formation but hindered the product formation in presence of bidentate ligand. In order to increase the yield of the desired product and to avoid the formation of the pyridine byproduct, a binary solvent system [(1,4-dioxane and t-amylalcohol (t-AmOH)] was used. The reaction enjoyed differently substituted N-aryl as well as N-alkyl substrates with product yields up to 96%. Only, meta-nitrobenzene gave a little lower yield of 57%. Moreover, the use of benzamide, acetamide, trans-cinnamide, cyclohexancarboxamide, 2-furanamide, and formamide as amide coupling partners also resulted in significantly higher product yields ( Figure 6).   DMAc was the preferred choice over DMF because of its high stability, low toxicity, low corrosion, and good solubility. The added advantage of the procedure was minimal loading of the catalyst of just about 0.2 mol %. The reaction has accountable functional group tolerance; good yields were obtained with aryl bromides bearing EWGs than with EDGs along with high yields from bromobenzene, biphenyl bromide or bromopyridine (Table 10, entries 6, 10 and 11).
Bromoketones substituted with a nitro or a methyl group at the para-position were also found to give a good yield of the products. Mechanistically, the reaction was thought to proceed via formation of imine 132 by the reaction between 2-AP and α-bromoketone which was intramolecularly attacked by the nucleophilic nitrogen of the pyridine.  [161]. Previously this kind of synthesis was reported by many groups which suffered from certain bottlenecks like limited substrate scope, moderate yields and longer reaction times [162][163][164]. The reported one-pot strategy thought to be a multi-reaction system involving amidation, Knoevenagel condensation, Pd-catalyzed Wacker-type oxidation and C-O coupling (Scheme 92). The activity of tripotassium phosphate (K 3 PO 4 ) as the base was found to be superior to bases like K 2 CO 3 /KOH/Cs 2 CO 3 /t-BuOK with a yield of 61% for the reaction between 2-amino-1-(2-ethoxy-2-oxoethyl)pyridi-1-ium bromide 274 and 2-bromobenzaldehyde 275. The use of organic bases like DBU has decreased the yield to 15%. Among different Pd catalyst and oxidants optimized, a combination of Pd(TFA) 2 and Cu(OAc) 2 was found to give the best results under air atmosphere. In absence of Pd catalyst no product was formed whereas only 10% yield was obtained in the absence of copper oxidant (that was required for reoxidising Pd(0) to Pd(II) for completing the catalytic cycle).
Along with the catalytic system an 1:1 ratio of DMF and water as a solvent and air atmosphere were required for the reaction as use of anhyd. DMF or molecular sieves and inert atmosphere of nitrogen resulted in decreased yield. The reaction conditions tolerated differently substituted aromatic and heteroaromatic aldehydes except 1-bromo-3,4-dihydronaphthalene-2-carbaldehyde that gave a lower yield of 35%. On the other hand, C-5substituted pyridinium salts gave lower yields as compared to unsubstituted or C-3 substituted salts. C-5-substituted pyridinium salts resulted in the formation of N-acetyl-2-aminopyridines as a byproduct along with the final compound. More-over, 5-nitro-substituted pyridinium salt did not give the desired product under optimized conditions. The reaction mechanism involved an initial base-mediated intramolecular amidation and Knoevenagel condensation of two reactants to form an intermediate that coordinated to Pd (

Zinc-catalyzed synthetic protocols
Zinc oxide nanorods (ZnO NRs) have been used successfully by Sadjadi and Eskandari in synthesizing imidazo[1,2-a]azines and diazines via a three-component one-pot reaction [165]. They have employed a novel, solvent-free procedure for synthesizing NRs, and used them as a heterogeneous catalytic system with a minimum loading of 0.5 mg. They have employed benzaldehydes, 2-aminoazines 286 and trimethylsilyl cyanide (TMSCN, 287) as reacting substrates (Scheme 94).
These NRs found to posses more activity than bulk ZnO.  clearly indicated that these reaction conditions were compatible with both electron donating (ED) as well as electron withdrawing groups (EWGs) on reacting compounds.
The greener aspect of the procedure lied in the recyclability and reusability of the used catalyst. The synthetic protocol enjoyed a rich library of synthesized compounds with the negligible effect of directing groups on yield of the final compounds. The beauty of the process lied in wide variation among all the three reacting substrates. The proposed mechanism of the reaction involved initial formation of imine 292, which was further activated by ZnO NPs by increasing the electrophilicity of imine  [24]. The synthesis involved a two component one-pot reaction between 2-APs and α-amino carbonyl compounds under milder conditions (Table 12). In order to increase the yield of the desired product molecular sieves have been used to remove the water generated during the reaction that might have affected the reaction outcome. This protocol resulted in an appreciable yield of the product generated with differently substituted α-aminocarbonyl compounds 295 (Table 12). However in the case of 2-APs 3 groups like methyl were well tolerated at different positions viz., ortho/ meta/para, also 74% yield with para-methoxy-2-AP was quite appreciable. However, 3-benzyloxy and 4-chloro-substituted 2-AP gave lesser yields of about 52 and 46%, respectively, the reaction did not result in the formation of the product with 4-Br substituent (entry 8, Table 13). The reaction was expected to proceed via in situ formation of imine 296 catalyzed by Lewis acid, followed by cyclization, H transfer and oxidation which  led to the formation of the final product 216 (Scheme 97). The reaction was also applicable for the synthesis of many pharmaceutically relevant imidazopyridines (IPs).
Sadjadi and Eskandari, in continuation of their own work reported in 2012 [167], have reported a similar three-component one-pot reaction of benzaldehydes 1, 2-aminoazines 286 and trimethylsilyl cyanides 287 for the synthesis of imidazo[1,2a]azines [172]. The reaction was catalyzed by ZnO NRs as they have used in their previous work. The difference was the use of ultrasonic conditions in the present protocol thus, following the principles of green chemistry (Scheme 98). Benzaldehydes and  benzaldehyde and 2-picolylamine 310 [176]. The synthesis has been achieved through the action of Fe 2+ ion on a dynamic library of imines generated in situ via condensation of benzaldehydes and 2-picolylamines (in 1:2 molar ratio). Evaluation of electronic effects has shown that aldehydes with moderate EW and EDGs gave good yields whereas p-OCH 3  reaction of aldehyde and amine. This imine formed a complex with an iron catalyst, which was then cyclized to form carbine 319 that on oxidation resulted in the desired product (Scheme 105). with other TMs such as [RuCl 2 (p-cymene)] 2 , (PPh 3 ) 3 -RhCl and Pd(OAc) 2 which showed much less or negative catalytic activity. This system has well tolerated symmetrical and unsymmetrical alkynes, rather than terminal alkynes along with a differently substituted imidazole moiety. Moreover, N-phenylimidazole bearing either ED or EWGs at the para-position of the N-aryl ring showed good reactivity. However, ortho-substitution gave only a 25% yield, probably because of steric hindrance. Imidazoles with N-heteroaryl group were also compatible under the reported conditions, thus producing a large variety of compounds. In this reaction, Rh(III) undergo insertion at C(5a)-H, presumably facilitated by the assistance of adjacent π-system that was followed by vinylic C(sp 2 )-H activation to afford the five-membered rhodacycle intermediate 325. Subsequently, alkyne coordinates to the Rh(III) complex with subsequent reductive elimination to yield the final product (Scheme 107).

Rhodium-catalyzed synthetic protocols
A non-aromatic C(sp 2 )-H bond activation-functionalization of imidazolium salts 327 with internal alkynes catalyzed by Rh(III) was reported by Thenarukandiyil et al. to synthesize imidazo[1,2-a]pyridinium salts 328 [179]. The same group has initially reported reactivity of N-heterocyclic carbenes (NHCs) as directing group for aromatic/heteroaromatic C−H activation with alkynes to construct positively charged π-conjugated organic materials. However, non-aromatic C(sp 2 )-H bond activation suffered from few challenges like stabilization of the generated positive charge by delocalization and hinderance in the activation of the non-aromatic C(sp 2 )-H bond due to the presence of substituents on the double bond, thus they have envisioned extending the strategy to non-aromatic C(sp 2 )−H bonds as well.
However, the design and development of novel synthetic pathways through the exploration of non-aromatic C(sp 2 )−H containing organic substrates are of greater demand. Therefore, in the Rh(III)-catalyzed non-aromantic C(sp 2 )-H activation functionalization reaction, the role of NHC of N-heterocyclic motifs as a directing group along with the crucial involvement of copper/silver salts in this transformation has been envisaged (Scheme 108) [179]. Moreover, the annulation was substantially feasible with various substituents such as methyl, butyl, and benzyl in the imidazolium substrates in good yields. In case of alkynes, diaryl acetylenes bearing EW and EDGs and aryl-alkyl substituents gave a good yield. Diarylacetylenes bearing either EWG (NO 2 ) or EDG (OMe) on one of the phenyl rings produced regioisomeric products in 74% and 87% overall yields, respectively.
Interestingly an imidazolium salt with an iodine anion gave only 31% of the product with dipropylacetylene whereas the salt of the triflate anion gave 86% yield with a similar alkyne. In this process, C-H activation led to the formation of a fivemembered cyclometalated complex by the in-built NHC ligand coordination. The alkyne then coordinated to the so formed complex followed by reductive elimination leading to the final product in appreciable yields. This protocol provided a comparison between the reactivity of non-aromatic vs aromatic C(sp 2 )-H bond within a single molecule. The results have shown higher reactivity of the aryl C(sp 2 )-H bond (Scheme 109, 329a). Moreover, the use of pyridine substituent has resulted in pyridyl C(sp 2 )-H functionalized moiety as the only product, interestingly excess of alkyne at higher temperature provided a double C(sp 2 )-H activated product (Scheme 109, 329b and 331). Propargyl alcohols containing ED/EWGs such as -OMe, -Et, -Cl and -F at the para as well as meta-position were well tolerated as compared to the ortho-position due to steric hindrance. However, the use of aliphatic alkynes was not compatible with this transformation and gave only a trace amount of the product. Moreover, the groups like -Cl, -CF 3 , -F or -OBn were well tolerated at C-3 and C-4 positions of the 2-pyridone ring whereas no product was obtained with 5-Me substitution. The use of TEMPO resulted in traces of the final compound suggesting a radical mechanism for the reaction (Scheme 111).

Ruthenium/lanthanum/scandium-catalyzed and miscellaneous synthetic protocols
Owing to the catalytic applications of scandium, Maiti et al. have reported a new synthetic methodology for rapid synthesis of the hybrid molecule by integration of two different pharmacophores. This domino protocol involved GBB reaction as a key transformation in the reaction of substituted benzimidazolelinked aminopyridine 340, aldehydes and isonitriles [181]. This reaction was catalyzed by scandium(III) triflate under solventfree microwave irradiation and afforded a library of benzimidazolylimidazo[1,2-a]pyridines 341 in excellent yields in a onepot mechanism (Scheme 112). Scheme 112 also depicts a probable scandium(III) triflate-driven mechanism. In this regard, the microwave-assisted, solvent-free strategy was proven as the environmentally benign, powerful approach for the efficient and quick formation of the desired products. However, protic acids (TFA and p-TSA) and the Lewis acid ZnCl 2 as catalysts failed to deliver the desired product in significant yield. Moreover, the absence of scandium(III) triflate did not generate the required compound under the reported conditions. Further exploration of substituents has shown that aldehydes containing EWGs tend to react much faster than EDGs and neutral aldehydes. Also, the 146 (Scheme 114) [183]. The reaction was catalyzed by RuCl 3 and co-catalyzed by molecular iodine.
Iodine was mandatory in this protocol as its absence resulted in a poor yield of the product, whereas 50 mol % loading resulted in an excellent yield of the product (maximum of 86%). The reaction was not compatible with other catalysts like Ag(OAc) 2 , Bi(OTf) 3 and Yb(OTf) 3 as they led to a maximum yield of only 20% and in case of Ag 2 CO 3 and Zn(OTf) 2 no product was formed. Absence of catalyst or co-catalyst, in this case, proved to be futile. This one-pot tandem oxidative cyclization procedure has well tolerated a wide variety of substituted chalcones/ heteroaryl chalcones and 2-APs. The steric effect was found to be ineffective for this transformation as 3-methyl and 6-methyl substituted 2-AP gave a good yield. The beauty of this process lies in very little loading of the catalyst and co-catalyst. The reaction conditions were also compatible with gram-scale production of the target compounds. The reaction was supposed to proceed via Michael addition because when the reaction was performed under nitrogen atmosphere only Michael adduct 348 was obtained. This adduct when subjected to optimized conditions, i.e., under air it undergoes intramolecular cyclization and oxidation to yield the final moiety 147 (Scheme 115). In this mechanism, the Ru catalyst helped in activation of chalcone and iodine promoted the intramolecular cyclization step. The mechanism has proved air atmosphere to be mandatory for this conversion because even on retaining the catalytic and solvent conditions N 2 atmosphere failed to produce the targeted moiety. In order to exploit the catalytic functionality of lanthanum Shinde et al. have reported a one-pot GBB reaction for  [30]. This microwave-assisted aerobic reaction was catalyzed by nano-NiFe 2 O 4 . Compound 3, 303, and 304 were used as reaction substrates with alcohol 304 as one of the primary reactants (Scheme 120).
The alcohol helped in the formation of 2-alkoxy derivative, however, the introduction of alkoxy group is challenging due to poor nucleophilicity of alcohols. This was observed when the reaction was carried out in DCM in the absence of alcohol, only 2-nitroimidazopyridine was formed which does not undergo any substitution at the NO 2 group at the later stage of the reaction. The addition of an alkoxy group and displacement of the NO 2 group took place at an intermediate stage. The reaction was also tried with Cu-/Mn-/Co-ferrites, nano-Fe 3 O 4 , and NiO NPs but appreciable results were obtained with nano-NiFe 2 O 4 . Probably, basic Ni-sites and Fe-sites provided a synergistic effect for the production of 2-ethoxyimidazopyridines. The reaction was not feasible with the targeted outcome at room temperature as only acyclized derivative 363 mentioned in Scheme 121, was formed.
The reaction was supposed to proceed via aza-Michael addition of compound 3 to 303 that was promoted by basic Ni-sites of NiFe 2 O 4 (Scheme 122). This was followed by Fe-promoted subsequent oxidative imination and nucleophilic substitution of the NO 2 group and its removal as HNO 2 . At the end of the reaction, the catalyst was regenerated after the liberation of H 2 (which reduced nitrobenzene 368 to aniline 369). The advantage associated with NiFe 2 O 4 was its dual behavior of catalyst as well as an oxidant.
A facile synthesis with readily available substrates for imidazo[1,2-a;3,4-a']dipyridiniums 370 was reported by Li et al., the synthesis was simple and facile involving cobalt/copper co-catalyzed system [186]. This was the only report after first- Operation of the reaction in the absence of CoCl 2 or CuI led to substrate decomposition and either low or no yield of the product. Along with the catalyst, the presence of Cs 2 CO 3 as a base and air atmosphere was equally important for reaction feasibility. A wide library of compounds was produced by differently substituted reacting compounds. The pyridine ring has shown good tolerance towards different groups at C-3 or C-4 position but the yield was completely suppressed with C-5 substitution due to steric hinderance. EW and EDGs at C-2 or C-3 position of the pyridyl ring were equally well tolerated. Gratifyingly groups like F, Cl, OMe and Me present on the para-position of the phenyl ring in aryl halides were well tolerated compared to those at meta or ortho-positions. Apart from the phenyl ring in halides thiophene afforded the product in 75% yield, but furan and aliphatic groups did not work well. The reaction followed a

Derivatization of imidazopyridines by C-H activation/functionalization and coupling reactions
Direct C−H functionalization/activation reactions of readily available starting materials for the construction of C-C as well as C-O and C-N bonds were highly step-and atom-economical [187]. In recent decades, intensive research efforts have been carried out for the development of feasible conditions for challenging C−H bond activation/functionalization and coupling reactions. Among many such studies, TM-catalyzed transformations constitute a far most valuable tool for efficient and economic syntheses of many complex molecules [188][189][190]. Such transformations embrace the step-economical construction of C-C, C-O, and C-N bonds formation from hydrocarbons or their fragments without the involvement of prior non-catalytic oxidation steps.

Copper-catalyzed derivatizations
Cao and Zhao et al. have described a Cu(I)-catalyzed C-C coupling reaction for arylation of C3-unsubstituted imidazo [1,2-a]pyridines 375 [191]. Among different ligands and bases examined the use of 1,10-phenanthroline and t-BuOK as ligand and base, respectively, resulted in a significant improvement in catalytic efficiency. The reaction was carried out at 140 °C for 24 h using DMF as solvent and CuI as catalyst (Scheme 125). The reaction has well tolerated both EW and EDGs on compound 180 and aryl iodides 262. This arylation was less sensitive to steric factors as ortho-, meta-and para-occupied derivatives gave the products in good yield. Apart from aryl iodides, the reaction was feasible with bromides and triflates giving a yield of the derivatized product of above 70%. Moreover, 1,4-dibromo-or diiodobenzene resulted in bis-imidazopyridine whereas 1,2-dihalobenzene did not form any bis-product and the mono-substituted product was formed in trace amounts only. The mechanism for this reaction is depicted in Scheme 126. The reaction was initiated by basepromoted deprotonation of 376. This was followed by a number of steps and finally reductive elimination that resulted in the final product regenerating the Cu(I) catalyst to participate in the next cycle.
Considering the immense potential associated with 1,2-dicarbonylimidazo[1,2-a]pyridine derivatives in the preparation of fine chemicals, Wang et al. have reported a novel approach for double carbonylation of imidazo[1,2-a]pyridines 375 with N,Ndisubstituted acetamide or acetone 379 (Scheme 127) [192]. The reaction was catalyzed by Cu(OAc) 2 in the presence of molecular oxygen in a regioselective fashion. The use of different additives to improve the yield has shown a beneficial effect of the acidic system. The combined use of t-AmOH and acetic acid (AcOH) proved to be the best additive in the presence of catalyst and O 2 at 120 °C. The reaction was also optimized for the best Cu(II) catalyst and Cu(OAc) 2 was found optimal among CuCl 2 , CuF 2 , CuBr 2 and Cu(CF 3 SO 3 ) 2 , also its absence was unable to carry forward the reaction.
The methodology was successful with various 2-unsubstituted IPs having methyl groups at different positions of the pyridine ring, whereas with iodine group at 6-position the yield was <5%. IPs substituted at 2-position with CH 3 , Ph or C(CH 3 ) 3 gave the corresponding product in 51-78% yield showing the reaction feasibility with aryl as well as alkyl groups. However, in the case of acetamides, phenylacetamide gave only traces of the product whereas, diethylacetamide and acetone were well tolerated. Mechanistic studies have revealed that oxygen of the carbonyl group was derived from molecular oxygen rather than a water molecule. The reaction was expected to proceed via radical formation from the acetamide moiety by SET 382. The radical formed was added directly to IP, which was followed by another SET, proton transfer and SET oxidation to generate a radical intermediate 384. This was trapped by dioxygen to give radical 385 that captured the hydrogen from reaction mixture followed by dehydration to give final compound 380 (Scheme 128).
A novel approach for C-S bond formation using molecular oxygen as a greener oxidant was put forth by the group of Zheng and Qi. The reaction involved cross dehydrogenative coupling between compound 375 and heteroaryl/aryl/alkyl thiols 387a, 387b and 387c under base-free conditions (Scheme 129) [193]. Optimization of various copper salts has shown Cu(OAc) 2 to be more efficient than others. Application of different oxidants viz., air, oxone, oxygen, BQ, K 2 S 2 O 8 , and AgOAc has revealed oxygen to be the best under these reaction conditions. The protocol has well tolerated heteroaromatic/aromatic/aliphatic thiols to give 72-92% yield of the compounds.

Scheme 128:
Radical mechanism for double carbonylation of IP.
Scheme 129: C-S bond formation reaction catalyzed by cupric acetate.
Also, the reaction was unaffected by steric hinderance of orthosubstituted thiols, giving the products in good yields. Further examination of the reaction has shown it to be regioselective as thiolation took place selectively at C-3 position of the unsubstituted imidazo[1,2-a]pyridine. Furthermore, the reaction conditions were also feasible for 3-methyl-6-phenylimidazo [2,1b]thiazole that resulted in a moderate yield of the products with 4-methyl and 4-methoxy-substituted arylthiols (39 and 46%, respectively).
After reporting a palladium-catalyzed arylation of IP Cao et al. have reported a novel and an efficient route for C-3 formylation of imidazo[1,2-a]pyridines catalyzed by cupric acetate (Scheme 130) [127]. The group has exploited the ability of dimethyl sulfoxide (DMSO, 389) to be used as both a carbon source as well as solvent. Compound 389 was found to act as an important carbon source for C=O, Me, SMe, SO 2 CH 3, and CN formation.
The group has initially tried the reaction of 2-tertbutylimidazo[1,2-a]pyridine using Cu(OAc) 2 as a catalyst under an oxygen atmosphere at 120 °C and obtained the formylated product in 46% yield. In order to improve the yield, different additives were used and AcOH was found to increase the yield up to 82%. However, in the absence of Cu(OAc) 2 no product was detected proving the essentiality of a copper catalyst. The protocol has well tolerated a variety of 2-substituted imidazo[1,2-a]pyridines with a phenyl ring, a sterically bulky C(CH 3 ) 3 group and methyl groups at different positions (like 2, 6, 7 and 8). This formylation is regioselective as the C-3 position was functionalized even by using 2-unsubstituted IPs (D and E, Scheme 131). The control experiments performed by the group revealed compound 389 and oxygen to be the carbonhydrogen and oxygen source of the aldehyde respectively (F, Scheme 131). The reaction proceeded by a radical pathway which was delineated by the use of TEMPO and duroquinone (radical inhibitors) that did not form any product (G and H, Scheme 131). Mechanistically, simultaneous SET oxidation of 389 and 375 generated two radicals which were coupled together to generate methylated intermediate 396. This intermediate was again converted to a radical by SET [O] which was trapped by oxygen to give a peroxy radical that finally get converted in the desired product 89 (Scheme 132). Shakoor et al. have demonstrated a copper-catalyzed double-oxidative crossdehydrogenative procedure for the synthesis of C-3 coupled imidazo[1,2-a]pyridine systems [194]. This work was significant in terms of direct cross-dehydrogenative coupling (CDC) which has not been reported earlier. The reaction was carried out between C(sp 2 )-H of aldehyde 1 and C3(sp 2 )-H of 375 (Scheme 133).
The reaction was studied with different metal salts but the best results were obtained with CuBr. Among the different oxidants and ligands studied, air and 2,2-bipyridine were found to be optimal giving the best results. The control experiments performed necessitate the aerobic condition along with copper bromide, as in the absence of any of them reaction did not proceed. Exploration of reaction scope interestingly resulted in the use of aryl aldehydes over aliphatic ones which did not result in product formation, also the presence of both EW as well as EDGs on 375 have well tolerated the reaction. Moreover, the scope was extended to many other imidazo heterocycles like Furthermore in order to explore reaction mechanism TEMPO was used which indicated the radical pathway of the reaction, as the application of TEMPO inhibited the reaction. The reaction was thought to be initiated by the attack of imidazo[1,2-a]pyridine on carbonyl of phenylacetaldehyde by a radical mechanism via a single electron transfer (SET) route. This was followed by oxidation/oxygen insertion giving the final dicarbonylated product (Scheme 135). Joshi et al. have developed a synthetic strategy for imidazo[1,5-a]pyridines 37 via denitrogenative transannulation reaction [195]. They have reported the use of a copper salt (CuI) as a catalyst at elevated temperature in a closed tube. The reaction represents good functional group tolerance for the starting materials with both amines 35 and amino acid derivatives 194 (Scheme 136). The reaction was also found to be successful with α-amino acids, like phenyl glycine, alanine, and leucin via decarboxylation and transannulation. Though, the strategy was not applicable for aza-heterocyclic and simple aliphatic amines as they were decomposed during the reaction. The formation of the product did not occur in the absence of a catalyst. Also, under neat conditions and an atmosphere of oxygen and nitrogen a drastic decrease in the product yield took place. The reaction proceeds via denitrogenation followed by the formation of Cu-carbene complex 411 which underwent migratory insertion/oxidative dehydrogenation/aromatization to yield the final product 37. Oxidation is carried out by the molecular oxygen from the air (Scheme 137).
In continuation of the work towards C(sp 2 )-H bond activation of IPs Lei et al. have reported a novel copper-catalyzed cross coupling of 180 with methylheteroarenes 418 [196]. This reaction involved regioselective C-3 carbonylation of IP. The conditions used were found to be inspired by their previous work. Cu(OAc) 2 was used as a catalyst in the presence of trifluoroacetic acid (TFA) in a sealed tube with oxygen atmosphere to gave a good yield of products 147 (Scheme 138). The application of different oxidants like TBHP, K 2 S 2 O 8 , DDQ, and AgOAc has shown O 2 to be the best for this reaction.
The pyridine ring of IP has well tolerated both EW and EDGs. Moreover, the 2-position of IP, substituted with methyl, phenyl, and t-Bu worked well, whereas in the presence of a CF 3 group the reaction could not be performed. On the other hand methyl heteroarenes substituted with both EW and EDGs along with Scheme 137: Plausible reaction pathway for denitrogenative transannulation.
2-methylquinoline, 2-methylpyrazine, 2-chloro-3-methylpyrazine and 2,5-dimethylthiazole reacted well to afford good yields of the desired compounds. Further exploration of the reaction mechanism has revealed a radical-driven pathway with the initial coupling of both the reactants rather than the formation of benzaldehyde from methylheteroarenes (Scheme 139).
A direct C-2 alkynylation of 3H-imidazo [4,5-b]pyridines 426 was reported by the group of J. Aziz. The group has used Cu(OAc) 2 or CuBr·SMe 2 (copper bromide in a dimethyl sulfide complex) as catalyst depending upon the nature of substituents present on the reacting substrates [197]. The reaction involved DPEphos as a phosphine ligand and LiOt-Bu as a base in 1,4dioxane at 120 °C (Scheme 140). The protecting group present at the N-3 position of the IP moiety was coupled with gemdihaloalkenes 427 via C-H alkynylation. Initially, p-methoxybenzyl (PMB) was used as a protecting group but its deprotection led to degradation of the formed product. Thus, it was changed to 2-methoxyethoxymethyl ether (MEM) as a protecting group which could be easily deprotected to give a moderate yield of the final compound without degradation. Although the reported methodology was not compatible with the nitrile functional group it has tolerated a wide variety of other EW and EDGs. The reaction was supposed to proceed via either of the two pathways reported by the group based on literature reports; the mechanism is depicted in Scheme 141.

Palladium-catalyzed derivatizations
Sajith and Muralidharan have put forth the very first Sonogashira cross-coupling reaction (SCCR) using 3-alkyl-2-haloimidazo [4,5-b]pyridine 435 as one of the heteroaromatic substrates [198]. The advantageous aspect of their methodology lied in the development of an efficient protocol involving copper-and amine-free SCCR using a palladium catalyst (Scheme 142). The formation of homocoupled product from copper acetylide was a major drawback that led them to modify the reaction to copper-free conditions and used PdCl 2 (PCy 3 ) 2 as an efficient catalyst. This catalyst was found to be more effective than Pd(PPh 3 ) 4 , PdCl 2 (PPh 3 ) 2 , PdCl 2 (CH 3 CN) 2 and Pd(dba) 3 with NMP (N-methylpyrrolidinone) as solvent under copper-free and MW (110 °C) conditions. Furthermore, they have used tetrabutylammonium acetate (Bu 4 NOAc) as a mild base to deprotonate the acidic proton of the alkyne 2 and for the formation of the Pd(0) species.
The reaction has represented a wide functional group tolerance. The iodo-substituted imidazo [4,5-b]pyridine derivatives were found to react in a much faster way as compared to bromo and chloro-substituted ones. This might be due to the easy removal of the iodide species. On the other hand, the reaction proceeds more efficiently with aromatic alkynes than with the aliphatic ones. The combination of electronic and steric properties associated with the reported catalyst was found to enhance its activity. The reaction was expected to follow oxidative addition, transmetallation and reductive elimination steps which were easier to perform due to the presence of less bulky ligands on the metal center. Furthermore, the reaction involved the formation of a monoligated species which was stabilized by electronrich ligands attached to the Pd center. They have simultaneously developed a MW-assisted palladium-catalyzed Suzuki coupling reaction between substituted aryl/heteroarylboronic acids 77 and 3-substituted-2-iodo-3H-imidazo[4,5-b]pyridine derivatives 439 to synthesize 3-substituted-2-aryl/heteroaryl imidazo [4,5-b]pyridines [199]. Initially, they have tried this coupling reaction via aromatic nucleophilic substitution (S N Ar) but it did not result in product formation. Different halo-substituted I [4,5-b]Ps were examined (viz., chloro, bromo, and iodo) for this coupling which revealed the iodo substituent to be highly reactive and thus happened to be dehalogenated rather than coupling at the C-2 position. Furthermore, substitution with other two halogens resulted in product formation although in lesser amount using Pd(OAc) 2 / BINAP (catalyst/ligand) and Cs 2 CO 3 as a base in 1,4-dioxane.
In order to increase the overall yield exploration of different ligands (X-Phos, BINAP, and Xantphos, Figure 7) was carried out which showed that appropriate steric and electronic properties of ligand played a crucial role in this conversion. Finally, the use of Xantphos has resulted in a regioselective C-2 amination of I [4,5-b]Ps using various enolizable heterocycles in appreciable yield. Zhao et al. have reported a regioselective arylation of compound 375 by a direct method catalyzed by palladium acetate [202]. The process ruled out any requirement for a pre-functionalisation of the reaction substrates. Successful arylation at the C-3 position of unsubstituted imidazo[1,2-a]pyridine with 77 makes this protocol highly regioselective. Application of Cu(OAc) 2 as oxidant and oxygen as co-oxidant in the presence of palladium acetate proved to be ideal for this synthesis (Scheme 147). However, the reaction did not result in product formation by using BQ and oxone as oxidant.
The reaction was depicted to be compatible with differently substituted arylboronic acids and a variety of 2-substituted imidazo[1,2-a]pyridines having both EW and EDGs, though the reaction yield was affected by steric factors as ortho-substituents gave moderate yields. The reaction was supposed to proceed via C-H cleavage at the 3-position of 375 followed by coordination from 77 and reductive elimination to yield the final product (Scheme 148). The group of Wang and Liu [203] has developed a more facile and versatile approach than that of Cao et al. [204] for the regioselective arylation of 375. The noteworthy aspect of their methodology was Pd(OAc) 2 -catalyzed cross coupling with unactivated arenes 451. This kind of direct dehydrogenative cross coupling has gained much attention due to the reduced cost of pre-functionalization and increased atom economy. The reaction has utilized a combination of Ag 2 CO 3 /O 2 as an effective oxidant for reoxidation of Pd(0) during the course of reaction (Scheme 149). Moreover, use of pivalic acid as additive and DMF as solvent was found to create the best reaction conditions.
The method appeared to have good functional group tolerance on both IPs and benzene with a maximum yield of about 79%. However, the reaction was affected by steric hinderance as the reaction of ortho and meta-xylene occurred at less hindered position and that of mesitylene resulted in sluggish rate with low yield (26% and 29%) of the product. This protocol was also regioselective as it gave C3-substituted product over C2-arylated product. The reaction was thought to proceed by easy abstraction of hydrogen from IP by Pd(OAc) 2 followed by concerted metallation and deprotonation of arene which might be the rate determination step of the reaction.  [204]. In order to optimize the reaction conditions, different oxidants were tried such as BQ, DDQ, t-BuOOBz, etc. but the combination of O 2 and Ag 2 CO 3 was found to be more effective. Thus the reaction has avoided the formation of environmentally hazardous byproducts and also reduced the use of silver salts as the sole oxidant.
The reaction yield was further increased by the use of the additives AcOH/Ac 2 O. The protocol was highly regioselective, even when carried out with 2,3-dihydroimidazopyridines it gave the C-3-substituted product. This alkenylation has tolerated both styrenes as well as acrylates 455, however, styrenes gave the α-product and the β-product was obtained with the later one 456 (Scheme 152).
For the formation of two different types of product, two mechanistic pathways were reported for the reaction. Reaction with 455 involved initial palladation at C-3 position of the IPs 375 Synthesis of polycyclic aromatic hydrocarbons (PAHs) by direct C-H activation without using any directing group has encouraged the group of M. Ghosh to develop a palladium-catalyzed double C-H bond activation of 375 [205]. Among different palladium salts used, Pd(OAc) 2 was found to be most effective and the absence of catalyst resulted in failure of the reac-tion (Scheme 154). The group has also examined the effects of different oxidants viz. BQ, DDQ, Ag 2 CO 3 , AgOAc, O 2, etc. along with various additives (like pivalic acid, TBAB). The reaction was found to proceed well by using copper acetate as oxidant whereas the effect of additive was negligible on the reaction yield.
IP substrates with a phenyl ring at the 2-position and substituted with both EW and EDGs were found to give a good yield of the products. Also, unsubstituted and para-substituted diphenylacetylenes resulted in a moderate to good yield of the reaction product. However, internal alkynes like 1-phenyl-1propyne, methyl phenylpropiolate, dimethyl acetylene- . Furthermore, the reaction found to give a maximum yield of 96% of coupling product in the presence of the ligand S-Phos in contrast to other ligands like X-Phos, Ru-Phos, and PCy 3 . The reaction has wider substrate compatibility ranging from that of electron neutral/rich or poor reactants along with sterically hindered aryl/heteroaryl chlorides.
Addition of a small amounts of water to the solvent media has efficiently promoted the product yield. The reaction was promoted by a decarboxylative reaction and reductive elimination of IP to afford homocoupling product 469 and catalytically active Pd(0)L 2 with the assistance of the S-Phos ligand. This active catalyst was then combined with aryl chloride by oxidative addition followed by a ligand exchange reaction with carboxylic acid anion. This was followed by decarboxylation and reductive elimination reaction to generate the final arylated product with regeneration of Pd(0)L 2 to complete the catalytic cycle (Scheme 157). The Group of Karale has unprecedentedly reported a general protocol for ligand-free Pd(OAc) 2 -catalyzed arylation of 465 (Scheme 158) [208]. Palladium-catalyzed arylation reactions suffered from limitations of substrate scope and use of C-2-substituted imidazo [1,2-a]pyridines. The ligandless approach found to be widely used in the industries thus it became a method of choice in synthetic chemistry. The method developed by the group did not require any additive or ligand for the success of this reaction. However, the presence of a base (KOAc) resulted in the cross-coupled product in good yield with only negligible homocoupled byproduct. A decrease in the catalyst loading from 5 to 2 mol % resulted in an increased yield of the desired product with complete suppression of byproducts. The reason for this might be the formation of insoluble Pd black with higher amount of loading that resulted in decreased efficiency of the Heck reaction. The yield of reaction was also affected by the stoichiometry of the reactants as variation in the loading of IP from 1.4 to 1.5 or 1.6 equiv resulted in decreased homodimerization of the reactant. The reaction has shown good functional group tolerance with both EW and EDGs, the result was moderate to good and the yield of the products varied with reaction time. The reaction was also compatible with aryl chloride/bromide and with aryl/heteroaryl bromides. Despite wider applicability, the time consumed by this process with some substituents was very large which varies from several hours to days. The reaction involved an oxidative addition of Pd(0) to aryl bromide which was further coordinated with the carboxylate species. Decarboxylation of this intermediate followed by reductive elimination led to the formation of the 3-arylated product along with the reduction of Pd(II) to Pd(0) (Scheme 159). The group of Liu and He have reported a direct C-H bond arylation reaction of 375 with aryl chloride 466 [209]. The group has developed an N-heterocyclic carbine-Pd(II) [NHC-Pd(II)] complex which was found to be effective towards C-C, C-N coupling and C-H arylation reactions (Scheme 160). The NHC-Pd(II) complex developed has air and moisture stability and resulted in a direct arylation reaction without the use of any directing group. The reaction was found to proceed with efficiency in the presence of NaOt-Bu as compared to other bases examined for the reaction. The amount of base played a crucial role in the reaction yield, as decreasing the loading from 3 equiv to 2 equiv resulted in a decreased yield of the product.
Furthermore, the use of Pd(OAc) 2 or PdCl 2 did not form any product. The substrate effect was very interesting in the protocol as the reaction of unsubstituted IPs with aryl chlorides resulted in best yield when 2-/3-/4-fluorophenyl chloride were used rather than those with EDGs like methoxy and methyl. Aryl chlorides substituted with strong EWGs like NO 2 , CN and acetyl did not lead to the formation of the desired compounds. However, with substitution on IPs ary chlorides bearing methoxy and methyl substituents resulted in excellent product yield.
To decrease the loading of palladium as a catalyst and to avoid the use of the phosphine ligand Hai Y. Fu et al. have reported a ligand-free Pd(OAc) 2 -catalyzed C-3 arylation of 375 with 270 [210]. The reaction also required potassium acetate as a base with DMAc as the solvent system. The use of other acetate bases viz., CsOAc and NaOAc were also found to be compatible with the reported conditions as the acetates were in consistence with a concerted metalation-deprotonation (CMD) pathway. The reaction was successful with only 0.1-0.01 mol % loading of the catalyst with broadly substituted aryl bromides having an EW as well as EDGs at ortho, meta and para-posi- tions (Scheme 161). Use of bromonaphthalene/anthracene was also well tolerated as the product was obtained in >50% yield. Moreover, the use of heteroaryl bromides and arylpoly bromides resulted in high product yield of up to 92%. The reported protocol was not limited to imidazo[1,2-a]pyridine but 6-carbonitrile substituted compounds also gave the coupled product in 64 and 72% yield, with 4-bromobenzaldehyde or 2-bromonaphthalene, respectively. The advantageous point of the reaction was multi-solvent compatibility as it tolerated petan-1-ol, diethyl carbonate, and cyclopentyl methyl ether as well.
Choy and Luk have reported a Pd(II)-catalyzed direct C-3 arylation of 375 with aryl tosylates 477 and mesylates 478 [211]. This was the very first report on Pd-catalyzed direct arylation using tosylates and mesylates. A limited number of reports on direct C-3 arylation has paved the way for further development in this field. Combination of Pd(OAc) 2 with 2-dicyclohexylphosphino-2',6'-dimethoxybiphenyl (SPhos) provided a good catalytic system for tosylate coupling and Pd(OAc) 2 with 2-(2-(diisopropylphosphino)phenyl)-1-methyl-1H-indole (L1) found to be optimal in the case of mesylate coupling (Scheme 162). This reaction also required K 3 PO 4 ·H 2 O as a base with t-BuOH as a polar-protic solvent. Apart from these requirements the loading ratio of catalyst to ligand (L) also played a decisive role in this conversion. As a Pd/L ratio of 1:4 gave a good yield whereas the ratio of 1:3 provided lower conversion. Variously substituted aryl tosylates and monoheteroaromatic tosylates gave the expected product in good yield. Only 3-cyano and 4-cyanophenyl tosylates gave the product under Pd-L1 catalytic system rather than Pd-SPhos. Also, the electronically neutral aryl mesylates gave a good yield Scheme 166: Mechanism for C-H amination reaction.
of the products but the reaction was not feasible with sterically hindered mesylates. In 2015, group of M. Ghosh has designed a regioselective alkenylation of 375 with vinylarenes 189 through a CDC reaction [212]. The attractive feature of this report were the ligand-free conditions and use of molecular oxygen as green oxidant. The coupling was catalyzed by palladium acetate (Pd(OAc) 2 ) in the presence of ammonium salt (TBAB) as an additive that was thought to stabilize the active palladium species formed during the reaction in the form of nanoparticles (Scheme 163). The reaction conditions developed were applicable enough for producing 18 compounds from differently substituted reactants in appreciable yield.  [213]. The synthesized compounds were further analyzed for their fluorescent properties by both experimental and theoretical studies. Thermal stability of the pyridinium zwitter ion 481 used as reactant led to the use of catalyst rather than depending on temperature and additives only for the formation of products by 1,5-electrocyclization. This synthesis was carried out at 150 °C under microwaveassisted conditions. Pd(OAc) 2 /PPh 3 was used as catalyst whereas the use of Pd(PPh) 3 was not optimal. The Suzuki coupling and heteroarylation of the bromoimidazopyridine moiety led to product formation in good yield, however, initially when the reaction was performed with the 6-chloro derivative rather than the 6-bromo derivative of IP a poor yield was obtained. Another one-pot 3-step methodology involving a cyclization of 2-amino-5-bromopyridine with α-halogenocarbonyl derivatives followed by Suzuki coupling and heteroarylation reaction gave trisubstituted IP in moderate yields. Guo

Rhodium-catalyzed derivatizations
A C-H arylation reaction of 375 with aryl bromides or triflates 493 was reported by the group of Liu and He [216]. The synthesis was catalyzed by [Rh(cod)Cl] 2 in the presence of K 2 CO 3 as a base. Moreover, PPh 3 was used as a ligand in order to increase the product yield (Scheme 170).
Imidazopyridines substituted at C-1, C-5 and C-6 positions found to be compatible under the reported reaction conditions generating a big library of arylated compounds. Optimization studies have clearly revealed that on decreasing the loading of the catalyst from 5 mol % and co-catalyst from 120 mol % produced a remarkable decrease in the product yield. Application of symmetrical alkynes with EWGs seemed to be more reactive than EDGs. On the other hand differently substituted unsymmetrical alkynes also well tolerated the reac-tion whereas alkyl-substituted alkynes resulted in a poor yield of the product. Furthermore, IPs substituted with EDGs found to be more reactive than EWGs. The reaction was thought to proceed by the formation of a  [218] similar to that reported by Wang and Niu (Scheme 174) [217]. The difference between two reports was in terms of the oxidants and additives used, Cu(OAc) 2 ·H 2 O was used as an oxidant and Cs 2 CO 3 as an additive in this protocol, whereas Co(Ac) 2 ·4H 2 O was used as oxidant without any additive in the former process.
The reaction has a wider applicability as it has well tolerated both symmetrical as well as unsymmetrical alkynes; however, the reaction with unsymmetrical alkynes led to the formation of regioisomers. On the other hand, EDGs on both the pyridine ring and phenyl ring resulted in excellent yields of the desired products. The added advantage of the procedure was further functionalization of the bromo-substituted product by Heck (503), Suzuki (501) and Sonogashira (502)  Control experiments have revealed that omission of AgSbF 6 resulted in lower yields whereas by the removal of both the Rh complex and AgSbF 6 the reaction became infeasible. Further examination of the reaction scope with 2-arylimidazo[1,2a]pyridines and alkynes has revealed that the presence of both ED as well as EWGs at the para-position of the benzene ring was well tolerated with moderate to a good yield of the product. Also, -CH 3 , -OMe, halide and -CN groups on both the benzene and pyridine ring gave a good yield of the reaction products, however, with meta substitution two regioisomers were obtained. Moreover, symmetrical diarylacetylenes bearing differ-ent substituents resulted in an appreciable yield except for m-methyl and o-fluoro substitutions, though the coupling efficiency of unsymmetrical alkynes was high but a mixture of regioisomers was obtained that could not be separated chromatographically.
Several experiments performed to explore the mechanism have indicated that in both single and double C-H activation initial N-coordination was followed by rollover C-H activation to yield double C-H activation product. Firstly IP was coordinated with Rh to form a rhodacycle intermediate which get con- The synthesis has well tolerated different substituents on both the phenyl as well as pyridinyl ring in order to give excellent products. However, arylalkynes substituted with EWGs decreased the yield and use of aliphatic alkynes did not work under the reported conditions. In order to understand the reaction mechanism the kinetic isotopic effect (KIE) was studied which revealed the cleavage of the C-H bond in the phenyl ring to be the rate-limiting step. Two reaction pathways were reported by the authors both initiated by C-H bond cleavage (Scheme 180). At the end of the reaction a Rh(I) species was formed which was reoxidised by Cu(II) to Rh(III) to re-enter the catalytic cycle.
Ruthenium/iron/nickel/silver/vanadium/zinccatalyzed derivatizations proposed a highly regioselective oxidative olefination of 375 with 455 (Scheme 181) [221]. The catalytic activity of [RuCl 2 (p-cymene)] 2 over Ru(acac) 2 and RuCl 2 (PPh 3 ) 2 was remarkable in this olefination reaction. The use of copper(II) acetate and AgSbF 6 as an oxidant and additive respectively has resulted in good to the excellent yield of the products in this transformation. The presence of the ruthenium catalyst was mandatory as its absence failed to promote this derivatization. Evaluation of the substrate scope has revealed that acrylates with both ED and EWGs were well tolerated in the reaction. However, in the case of IPs EDGs were well tolerated whereas groups like COOEt resulted in moderate yield and no product formation in case of CF 3 as substituent. The regioselectivity of the reaction was explained by selective C-3 olefination even with 2,3-unsubstituted imidazopyridine.

Scheme 182: Reported reaction mechanism.
Mechanistically the reaction involved the migratory insertion of acrylate into the Ru-C bond of the intermediate formed between IP and the Ru complex. The so formed intermediate resulted in the final product formation by reductive elimination. Ru hydride produced at the end of this reaction was reoxidized by copper acetate to regenerate the active catalyst (Scheme 182).
Ready availability, environmental compatibility, low price, and lower toxicity made iron-derived catalysts a chemist's first choice. Although iron has been used in different forms to catalyze a number of organic reactions, reports on iron-catalyzed C-H functionalization are still scarce in the literature. Thus, from the scientific and environmental view point the group of Xiang and Chen have discovered a novel methodology for C-3 formylation of 375 catalyzed by iron(III) chloride (Scheme 183) [222]. The protocol did not require the use of any ligand and gave the product in moderate to good yield using oxygen as a greener oxidant. DMSO (389) used in this procedure acts as both the carbonyl carbon source as well as solvent. The optimization study of the reaction has revealed that the reaction was not viable in the presence of a base. Whereas the reaction proceeded under the acidic conditions especially in the presence of acetic acid, these results were similar to those reported by the group of Cao [127]. However, the absence of iron catalyst did not promote the reaction.
The reaction was suitable for a wide range of IPs substituted with both alkyl as well as phenyl groups. Moreover, IP substituted at C-2 position was found to give a slightly lower yield than the C-2-unsubstituted derivatives probably due to steric The group of Shibhara and Yamaguchi have reported Ni-catalyzed Kumada-Tamao-Corriu (KTC) and Pd-catalyzed Suzuki-Miyaura (SM) cross-coupling reactions for the arylation of 1-halo-3-arylimidazo[1,5-a]pyridines 527 [223]. In order to avoid the necessity of EWGs on electron-rich nitrogencontaining heteroaryl substrates for successful cross-coupling reaction, this protocol was investigated for efficient cross coupling even in the absence of EWGs. Halogenated imidazo[1,5a]pyridines were synthesized by conventional electrophilic halogenations. Firstly, the KTC cross-coupling reaction was carried out between 1-iodo-substituted imidazo[1,5-a]pyridine and arylmagnesium bromide using NiCl 2 at room temperature. However, this resulted in a satisfactory cross-coupled product (41%) along with a significant amount of homocoupled product from Grignard reagent (GR). Further optimization of nickel catalysts have shown that the use of Ni(dppp)Cl 2 suppressed the homocoupled product and increased the cross-coupled yield up to 86% (Scheme 185). The reaction has well tolerated the substituted IPs and a variety of arylmagnesium bromides (GR). However, p-trifluoromethylimidazopyridine was proved to be a sluggish substrate with a slightly longer reaction time. Further, in order to extend the substitution to ester, nitrile and nitro groups, a SM cross-coupling reaction was employed.
Under the conditions of SM reaction, iodo-substituted IP 527 was not effective hence brominated IP 529 was used as a coupling partner with phenylboronic acids 77. For the SM reaction Pd(dba) 2 and Pd(t-Bu) 3 were found to be an effective catalyst and KOH as a base to give a good yield of the cross-coupled product with p-or m-methoxycarbonylphenylboronic acids without the hydrolysis of the ester (Scheme 186).
The group of Kaswan and Porter have demonstrated vanadiumcatalyzed orthogonal methodology as an alternative route to traditional Mannich type reaction for the introduction of tertiary amines into the heterocycles [224]. This methodology involved oxidative aminomethylation which has limited reports in the literature. The reaction involved a vanadium-catalyzed coupling of substituted 2-arylimidazo[1,2-a]pyridines with N-methylmorpholine oxide (NMO, 530) at 3-position of IP in an efficient manner (Scheme 187). In this protocol, NMO served as both a coupling partner and as an oxidant. Initial use of vanadyl acetylacetonate (VO(acac) 2 ) catalyst in the presence of DCM as solvent resulted in the formation of acetylacetonate as a byproduct that was difficult to remove from the product mixture. Thus, by changing the solvent to 1,4-dioxane and increasing the amount of catalyst up to 20 mol % the target compound was synthesized with high purity using 5 equiv of NMO. The amount of NMO was also decisive as a decrease in its loading resulted in a decreased yield of the final product and increased the amount of unwanted byproduct. A study of substrates has revealed the favorable nature of EDGs over EWGs at the para-position of the phenyl ring in the imidazo[1,2-a]pyridine nucleus. No product was obtained with para-nitro substitution on the phenyl ring. The successful aminomethylation of 2-substituted indoles has shown the versatility of the protocol. The reaction was thought to proceed by Mannich-type mechanism via the ionic pathway, as the use of TEMPO could not affect the product yield. Mechanistically, the oxidation of VO(acac) 2 by NMO resulted in the formation of an iminium ion. This was attacked by IP forming the final product with the elimination of a water molecule and regeneration of the cata- lyst. Also, a side product was thought to be formed from the reaction of iminium ion with one of the ligands from the catalyst (Scheme 188).
The group of M.-S. Yu has reported a controlled C-3/C-5 functionalization of imidazo[1,5-a]pyridine with alkynes using the Ni/Al catalytic system [225]. The interesting part of their work was a selective C-H activation by wisely changing the mono metallic system to a bimetallic system. The use of Ni(cod) 2 resulted in a C3-H bond activation whereas the use of a Ni-Al [Ni(cod) 2 & AlMe 3 ] bimetallic system resulted in C5-H functionalization of imidazo[1,5-a]pyridines (Scheme 189). The use of phosphine ligands was completely ineffective in this protocol whereas the use of IMeS and PCy 3 gave the best yield. Encouraged by the group of Liu and co-workers [226] the use of AlMe 3 along with the nickel complex resulted in selective C5-H activation and provided the products in good yields. Examination of the substrate scope has revealed different EW and EDGs to be well tolerated at the aryl ring at the C-1 site of the imidazo[1,5-a]pyridine nucleus for both C3/C5-H activation. This kind of C5-H activation was unexplored before this work. Further exploration of alkynes has revealed that symmetric (except diphenylacetylene), as well as asymmetric alkynes, were reactive enough to give a good yield with superior C5 selectivity. Moreover, the reaction has well tolerated the aliphatic olefins and styrenes with functional groups except for the sterically hindered o-CH 3 and the strongly EW fluoro group. Successful C-H activation without using any directing group was an added advantage of this protocol. The group of Kilic and Turgut have developed an efficient direct C-H bond arylation reaction of imidazo[1,2-a]pyridines [227]. Aryl halides were used as an arylating agent and the reaction was catalyzed by monodispersed Ni@Pd core@shell NPs assembled on reduced graphene oxide (rGO) (rGO-Ni@Pd) as heterogeneous catalyst (Scheme 190). This report unprecedently revealed the use of this catalyst for C-H bond activation. Although a large number of C-H activation reports were there but most of them relied upon homogeneous catalysis. Use of the bimetallic system gained attention due to the synergistic effect arising between the two distinct metals. rGO used as support enabled the close-range contact of the nanocatalysts and aromatic compounds of the reaction mixture via π-π interactions.
The temperature in the reported reaction also proved to be a game changer, as lowering the temperature from 130 °C to 100 °C reduced the yield from 98% to only 10%. The use of the monometallic system of either Pd or Ni with rGO gave traces or 63% of the yield, respectively. This reaction was feasible with aryl iodides and bromides but not with chlorides. Halides with . This synthetic strategy was reported unprecedentedly using Zn(OTf) 2 , application of other Lewis acids including the triflates of silver, copper, and indium were also optimized but did not give a good yield of the product.
The reaction conditions developed were very versatile as it resulted in tetrasubstituted allenes with up to 97% yield. The reaction was feasible with imidazopyridines having aryl/ heteroaryl moiety at C-2 position with different substitutions on both pyridine ring as well as on aromatic ring at the C-2 position. However, the presence of aliphatic groups on the imidazopyridine did not work well. The practical applicability of this method was in the successful production of desired compounds up to gram-scale level.

Conclusion
A wider range of IP analogs has taken a lead role in the recent literature as pharmaceutical products and as reaction substrates in various organic transformations. Syntheses of several new derivatives of IPs have been reported considering either new synthetic routes or by performing modification in the preexisting methodologies. In this review article, we have summarized an updated account of advances in the arena of TM-catalyzed syntheses of IPs. The reported reactions have been observed to explore the role of TMs as a catalyst in their various forms viz., salts, oxides, complexes or mixed oxides. The reactions described have demonstrated that incorporation of TMs both in heterogenous as well as homogenous forms, were leading to efficient and economic syntheses of IPs. Further-more, many of these approaches have been applied successfully for the syntheses of commercial drugs like saripidem, zolimidine, and necopidem on gram scale in good yields. Conclusively it was inferred that the use of TMs not only increased the reaction yields but also avoided the formation of side products in many cases. We hope that the present review will create an impulse towards the development of new catalytic systems as heterogeneous, homogeneous and greener protocols generating feasible reaction methodologies for a number of variedly substituted IPs.