Recent developments in gold-catalyzed cycloaddition reactions

In the last years there have been extraordinary advances in the development of gold-catalyzed cycloaddition processes. In this review we will summarize some of the most remarkable examples, and present the mechanistic rational underlying the transformations.


Introduction
In modern organic synthesis, the criteria of efficiency, versatility, economy and ecology are of paramount importance [1]. Consequently, nowadays there is an increasing demand for the development of methods and strategies that allow the transformation of readily available precursors into target-relevant products in a rapid, economical and efficient manner. Cycloaddition reactions are among the synthetic tools that best fit these criteria, because by allowing the generation of at least two bonds and one cycle in a single operation, they produce a rapid increase in skeletal and also stereochemical complexity, and this is usually beneficial in terms of shortening the access to polycyclic products. Importantly, they generally involve the simple addition of two or more molecules, thereby being atom econom-ical, and take place with high regio-and stereocontrol [2,3]. Unfortunately, the realm of classical cycloaddition reactions is relatively small and restricted to precursors presenting suitable electronic properties. In this regard, transition metal complexes, owing to their multiple coordination and activation properties, offer excellent opportunities for the discovery of new cycloaddition alternatives, and in many cases they can be used in a catalytic manner.
Although transition metal-catalyzed cycloadditions have been known since the mid-20th century, it was not until the 80s and 90s that they were recognized as versatile and powerful synthetic tools. So far, most examples of transition metal-catalyzed cycloadditions have involved the use of rhodium, ruthenium, cobalt, nickel or palladium catalysts [4]. In recent years, however, platinum and particularly gold complexes have also emerged as excellent catalysts for the promotion of novel types of cycloaddition reactions, usually involving non-activated unsaturated systems (e.g., alkynes, allenes, alkenes or 1,3dienes) [5][6][7][8][9][10][11][12].
Today it is well known that the excellent reactivity of these group-11 catalysts can in part be explained in terms of relativistic effects, particularly marked in the case of gold [13,14], that induce the contraction of 6s and the expansion of 5d orbitals. As a consequence this metal exhibits singular characteristics, such as a high carbophilicity, affinity for π-unsaturated systems (e.g., alkynes, alkenes or allenes), and a low propensity to participate in typical redox processes characteristic of other transition metal catalytic cycles (e.g., oxidative additions and reductive eliminations). Therefore, platinum(II) and particularly gold(I) or (III) complexes tend to activate alkynes, alkenes or allenes in a highly chemoselective manner; activation that opens interesting reaction pathways that usually involve carbocationic intermediates. Also very important is the possibility of modulating the properties of the metal through modification of its ancillary ligands (e.g., phosphines, N-heterocyclic carbenes, etc.), which considerably widens the potential and versatility of these catalysts, and in particular of those consisting of cationic gold(I) complexes (e.g., ligand-Au + ).
In this context, a number of research groups have in recent years embarked on the design and development of new cycloaddition reactions promoted by gold(I) and (III) catalysts, and hence the field has experienced a remarkable expansion. In the following section, we summarize some of the most recent contributions, organized according to the type of unsaturated system that is initially activated by the electrophilic gold complex [12].
Related Pt-catalyzed cycloadditions will only be mentioned when required in the context of a particular gold-catalyzed process, or to highlight the differences between these carbophilic catalysts. On the other hand, dipolar cycloaddition reactions in which the gold complex does not activate π-bonds, but rather behaves as a more conventional Lewis acid, are not discussed [15][16][17].

Review Cycloadditions initiated by gold-activation of alkynes
Many examples of homogeneous catalysis employing gold complexes exploit the ability of these metal catalysts to bind chemoselectively to C-C triple bonds, promoting a subsequent attack of a nucleophile on these activated unsaturated systems. Although these metal carbophilic catalysts also coordinate to alkenes, dienes and allenes in a similar way [18][19][20][21][22], nucleophiles seem to have a kinetic preference for attacking activated alkynyl systems, which warrants high chemoselectivities.
Based on this reactivity pattern, several groups have demonstrated that certain substrates containing an alkyne and a carbonyl unit can be transformed, under Au(I/III) catalysts, into gold-containing zwitterionic intermediates that undergo different types of cycloaddition reactions with alkynes, alkenes or other unsaturated groups present in the reaction media. The cycloaddition usually generates a metal carbene that evolves through different pathways depending on the catalyst and on the reaction components. The reaction therefore can provide a variety of interesting polycyclic systems.
For example, Yamamoto reported in 2002 a AuCl 3 -catalyzed formal (4 + 2) [23] benzannulation between ortho-alkynylbenzaldehydes of type 1 and alkynes (Scheme 1) [24,25]. The mechanism proposed by the authors involves an initial 5-endo nucleophilic attack of the carbonyl moiety on the metal-alkyne Scheme 2: Synthesis of 9-oxabicyclo[3.3.1]nona-4,7-dienes from 1-oxo-4-oxy-5-ynes [40]. complex to generate a carbonyl ylide intermediate I, which undergoes a regioselective (4 + 2) cycloaddition with the external alkyne. A subsequent elimination process on the resulting intermediate II accounts for the formation of the naphthyl ketone products 2, which were isolated in good yields. More recently, in 2004, Straub and coworkers reported a DFT study on these cycloadditions that led them to propose a modification of the aforementioned mechanistic pathway [26]. According to the theoretical data, the formal (4 + 2) cycloaddition would indeed comprise a two-step process consisting of a dipolar (3 + 2) cycloaddition of the carbonyl ylide I to afford a carbene species III [27,28], followed by a 1,2-alkyl migration to yield the previously suggested intermediate II (Scheme 1).
Closely related dipolar cycloadditions involving zwitterionic intermediates similar to I have also been developed with other transition metal catalysts such as tungsten, rhodium or platinum [32][33][34][35]. In particular, important developments were recently achieved with platinum catalysts [36,37], including the first enantioselective examples of these type of cycloadditions promoted by a chiral cationic platinum-diphosphine catalyst [38].
In contrast to these examples that proceed through an initial endo-dig cyclization and generate gold-carbonyl ylide species, the group of Liu recently demonstrated that it is also possible to produce alternative, reactive, zwitterionic intermediates of type IV through an exo-dig cyclization process when using 1-oxo-5ynes such as 3 and a cationic gold complex prepared in situ from P(t-Bu) 2 (o-biphenyl)AuCl (Au1) [39] and AgNTf 2 [40]. These dipolar intermediates undergo a cycloaddition with an external vinyl ether 4, leading to interesting 9-oxabicyclo[3.3.1]nona-4,7-dienes 5 in good yields (Scheme 2). In view of the highly stereoselective outcome of these reactions and the requirement of an alkoxy or acyloxy group at the propargylic position of 3, the authors proposed a reaction pathway based on an initial (3 + 2) dipolar cycloaddition between the carbonyl ylide IV and the alkene, followed by a ring expansion (1,2-alkyl migration) that is assisted by the oxy group and generates the oxonium intermediate V (Scheme 2). A final elimination process regenerates the catalyst and affords the oxacyclic product 5. Importantly, the reaction also proceeds with non-aromatic 1-oxo-4-alkoxy-5-ynes [40].
Curiously, when the substrate features an internal alkyne, such as in alkynyl acetate 6, the reaction evolves through alternative mechanistic pathways [41]. In particular, Liu showed that in these cases, the gold activation of the alkyne promotes a 1,3acyloxy shift that leads to ketone allenic intermediates of type VI (Scheme 3) [42,43]. Then, an intramolecular attack of the carbonyl group on the activated allene generates a benzopyrilium intermediate (VII) which undergoes a concerted and highly stereoselective (4 + 2) cycloaddition with the vinyl ether to yield, after the elimination of the gold catalyst, highly substituted oxacyclic systems 7 in good yields and with notable diastereoselectivities. Importantly, this reaction tolerates a wide range of vinyl ethers, and different substituents at the ketone Scheme 3: Stereocontrolled oxacyclization/(4 + 2)-cycloaddition cascade of ketone-allene substrates [43]. and alkyne units, as well as a variety of substituents at the aromatic ring of 6.
During the last few years, the groups of J. Zhang and L. Zhang have independently described alternative procedures to transform substrates that incorporate carbonyl and alkyne units into polar intermediates that undergo subsequent intermolecular annulations with diverse partners.
For example, in 2008, L. Zhang and coworkers demonstrated that a series of 1-(1-alkynyl)cyclopropyl ketones 8, previously used by Schmalz for the synthesis of furans [44], can be used as precursors of reactive intermediates (VIII) that participate in (4 + 2) annulations with polarized alkenes such as indoles, carbonyls, imines or silyl enol ethers [45]. Thus, different types of 6-membered carbocycles and heterocycles were prepared in good yields and notable regioselectivities. An example of these annulations, using indoles as two carbon cycloaddition partners and IPrAuNTf 2 as catalyst [Au2, IPr = bis(2,6-diisopropylphenyl)], is shown in Scheme 4. The reaction is initiated by a 5-endo-dig cyclization of the carbonyl oxygen onto the Au-activated C-C triple bond, giving rise to the oxocarbenium intermediate VIII. The authors proposed that these intermediates formally behave as an all-carbon 1,4-dipole that intermolecularly reacts with the indole providing the final polycyclic furan adducts 9 in a regioselective fashion (Scheme 4) [46].
In 2009, J. Zhang reported a gold(I)-catalyzed tandem cyclization/(3 + 3) cycloaddition of related 2-(1-alkynyl)-2-alken-1-ones 10 with nitrones [47]. The reactions provided a very practical entry to bicyclic oxazine derivatives 11, which were obtained in good yields and excellent selectivities (Scheme 5). A plausible mechanism, proposed by the authors, consists of an initial activation of the alkyne group of 10 by the carbophilic gold catalyst (Ph 3 PAuCl/AgOTf), followed by an intramolecular cyclization that generates the furanyl-gold complex IX. This intermediate is then trapped by the nucleophilic oxygen atom of the nitrone to afford X, which eventually evolves to the final cycloadduct by means of an intramolecular cyclization reaction, which generally proceeds with diastereoselectivities higher than 95:5 (Scheme 5). Interestingly, these cycloadditions can also be carried out in a highly enantioselective fashion using any of the bis(gold) complexes derived from (R)- with the former being slightly more efficient in certain cases (Scheme 6) [48].
If instead of a nitrone, a nucleophilic α,β-unsaturated imine is used as the second cycloaddition component, furo [3,4c]azepines such as 12 can be obtained [49]. An example of these cycloadditions is shown in Scheme 7. The mechanistic pathway proposed by the authors is also based on the interception of the furanyl-gold complex IX (see Scheme 5) by the nucleophile (the unsaturated imine), which is now followed by a 2,7-cyclization process and a ring cleavage to yield a furanyl intermediate featuring an iminium ion (XI). This species undergoes an intramolecular cyclization to yield the observed azepine product, and regenerates the gold catalyst.

Scheme 4:
Gold-catalyzed synthesis of polycyclic, fully substituted furans from 1-(1-alkynyl)cyclopropyl ketones [45]. Very recently, the same group reported a related gold-triggered formal (4 + 3) cycloaddition between nitrones and 1-(1alkynyl)oxiranyl ketones 13 [50]. The method provides heterobicyclic products of type 14 in a highly diastereoselective fashion. In these reactions, the gold complex Au3, derived from the bulky biaryl phosphine ligand RuPhos, provided the best reaction yields (Scheme 8). Common to all these reported cycloadditions is the initial nucleophilic addition of a carbonyl oxygen to the alkyne. As expected, an imine can also be used as a nucleophile, such as 15, which leads to the generation of an azomethine ylide capable of participating in dipolar (3 + 2) cycloadditions to unsaturated systems such as electron-rich alkenes. Examples of these cycloadditions, originally reported under tungsten catalysis [51], have been recently reported by Iwasawa with Au(III) and Pt(II) catalysts [52], allowing the assembly of interesting tricyclic indole skeletons 16 in good yields (Scheme 9).
with an intramolecularly tethered alkene or alkyne. Thus, interesting azabicyclo[3.2.1]octane skeletons 18 could be obtained in a highly diastereoselective fashion, in good yields and in excellent atom-economy [53,54].
The above reactions involve an initial attack of a heteroatom on gold-activated alkynes. However, it is also possible to induce alternative cycloaddition reactions of alkynes that start by addition of a π-carbon nucleophile instead of a heteronucleophile. For instance it has been shown that it is possible to achieve gold-catalyzed formal intramolecular (4 + 2) cycloadditions between alkynes and non-activated dienes such as 19 (e.g., Scheme 11) [55]. This type of cycloaddition has been classically promoted by other metal complexes such as Rh [56], Ru [57], or Ni [58], among others, that are metals that usually promote reaction pathways via metallacyclic intermediates in which the metal atom undergoes redox changes. In the case of the gold-catalyzed process the mechanism does not involve a change in the oxidation level of gold. Indeed, it has been proposed that the alkyne activation promotes a cyclization that generates a key cyclopropyl carbene intermediate of type XV. This intermediate evolves to the final cycloadduct 20 through a rearrangement process in which the gold catalyst is regenerated.
When using a dienol silyl ether such as 21 (Scheme 12) as the diene component, the formation of the (4 + 2) products can be justified in terms of an alternative mechanism consisting of a 5-exo nucleophilic attack of the silyl enol ether moiety on the electrophilically activated alkyne, followed by addition of the generated alkenyl metallic species to the α,β-unsaturated silyl oxonium moiety, to give a bicyclic carbene intermediate XVI [59]. These species, which do not incorporate an α-hydrogen atom that could participate in a 1,2-hydrogen shift process, evolve through a 1,2-alkyl migration to give the ring-expanded products 22, formally (4 + 2) cycloadducts. Interestingly, the stereoselectivity of these products is different from that of the Scheme 11: Gold-catalyzed intramolecular (4 + 2) cycloadditions of unactivated alkynes and dienes [55]. thermal Diels-Alder adducts that result when the substrates are heated under reflux in toluene.
The use of 1-aryl-1,6-enynes such as 23 and cationic Au(I) catalysts also allows one to perform a complementary type of formal (4 + 2) cycloaddition reaction (Scheme 13). In these reactions, developed by Echavarren and coworkers, the intermediate carbene species of type XVII evolves through ringopening of the cyclopropanic unit followed by a Friedel-Craftstype cyclization, which completes the catalytic cycle and regenerates the gold catalyst [39,60].
Interestingly, small changes in the substitution of the alkene, or the use of other catalysts, such as PtCl 2 (under a CO atmosphere), affect the result of the annulation, such that it is now possible to induce (2 + 2) instead of (4 + 2) cycloadditions [61]. Very recently, Echavarren and coworkers reported an intermolecular variant of this type of (2 + 2) alkyne-alkene cycloaddition reaction (Scheme 14) [62,63].
A less common annulation is the intramolecular (6 + 2) cycloaddition between non-activated alkynes and a cycloheptatriene. These cycloadditions were previously reported in the context of a stoichiometric chromium(0) activation of the triene unit [64]. The use of AuCl 3 or PtCl 2 rendered the reaction catalytic [65]. The mechanism entails a stepwise exo-cyclization of the cycloheptatriene onto the gold-activated alkyne, and ring closure of the resulting pentadienyl cation species (XVIII) to give the final tricyclic adducts in good yields. Although PtCl 2 is the most efficient catalyst for these intramolecular cycloadditions, the reaction of substrate 25 can also be performed with 5 mol % of AuCl 3 at room temperature, resulting in good yield (Scheme 15). In addition to all of these cycloadditions involving the participation of an alkyne and a second component, several goldcatalyzed formal cycloadditions of three different reaction components have also been described. In particular, the group of Echavarren has recently developed a formal (2 + 2 + 2) gold-catalyzed synthesis of interesting oxa-bridged bicyclo [5.3.0]decanes from 1,6-enyne precursors equipped with an appropriately tethered carbonyl group (27,Scheme 16) [66].
In these processes, the carbonyl acts as a nucleophile, attacking the gold-cyclopropyl carbene intermediate XIX to generate an oxonium cation species of type XX. Finally, a Prins-like cyclization renders the oxatricyclic product 28 and regenerates the gold(I) catalyst. Importantly, this strategy was successfully applied as a key step in the synthesis of orientalol F (Scheme 16) and englerins A and B [67][68][69].
Alternatively, the use of an alkene instead of a carbonyl nucleophile allows one to trap the carbene gold(I) intermediate in a (2 + 1) cycloaddition process that renders dicyclopropyl products. Both, intra-and intermolecular variants of these reactions have been reported in recent years (Scheme 17) [70,71].
Finally, the activation of alkynes with Au(I) has also been used recently to induce a hetero-dehydro Diels-Alder type of reaction. In particular, certain dienynes 29 with alkoxy groups at position 1 undergo a (4 + 2) cycloaddition with nitriles in the presence of cationic gold catalysts, such as Et 3 PAuCl/AgSbF 6 , to give tetrasubstituted pyridines 30 in good yields (Scheme 18) [72]. Scheme 17: Gold-catalyzed intermolecular cyclopropanation of enynes with alkenes [70].

Cycloadditions initiated by gold-activation of propargyl esters
These cycloadditions are a special case of those based on the activation of alkynes and deserve a separate discussion due to their relevance, wide versatility, and mechanistic peculiarities. Propargyl esters, usually acetates, are prone to undergo 1,2-or 1,3-acyloxy migrations in the presence of gold catalysts. The migration process begins with the nucleophilic intramolecular attack of the carboxyl unit on the metal-activated alkyne complex XXI. When a terminal alkyne is used (Figure 1, R = H), the 1,2-migration of the acetate moiety is preferred, affording an alkenyl-gold carbenoid species of type XXIII. In contrast, internal alkynes typically experience a 1,3-acyloxy migration rendering allenyl acetates of type XXII (Figure 1, R ≠ H), species which can be additionally activated by the metal catalyst to afford a wide range of gold-catalyzed transformations. Theoretical studies showed that all these species are in rapid equilibrium and the reactivity of the system depends not only on the substrate but also on the particular type of gold catalyst that is employed [73].
Several groups, in particular the group of Toste, have exploited the chemistry of these systems to develop new types of cycloaddition reactions [74][75][76]. For example, they showed that it is possible to trap the intermediate gold carbenoids of type XXIII', resulting from 1,2-acyloxy migration on propargyl esters such as 31 (pivalates, acetates or benzoates), with external alkenes. Usually, the reactions are highly stereoselective, predominantly affording the cis-cyclopropanic adduct 32. Moreover, the reaction tolerates a wide range of olefin substitutions (from mono-to tetra-substituted alkenes) and can be performed, in some cases, with excellent enantioselectivity using bis(gold) complexes derived from DTBM-Segphos (Scheme 19) [74][75][76].
This new gold-catalyzed transformation is somewhat related to those previously described by Doyle and by Barluenga that involved α,β-unsaturated imines and rhodium-vinyl carbenoids (Doyle) or Fischer carbenes (Barluenga). However, the stereochemical outcome of these three processes is different [78,79]. Therefore, the reactivity of gold species of type XXIII may be sometimes similar to that of other transition metal carbenoids or even to that of alkenyl Fischer carbenes. However, in many other cases, it is markedly different. For instance, while alkenyl Fischer carbenes act as two-carbon atom components in (3 + 2) cycloadditions with 1,3-dipoles [80], gold-carbenoids of type XXIII, generated from propargyl esters, can work as threecarbon synthons in cycloadditions with azomethine imines, also reported by Toste. An example is shown in Scheme 21 [81]. These (3 + 3) annulations take place through a stepwise mechanism related to that for the formation of azepines, consisting of a nucleophilic attack of the azomethine imines onto the intermediate alkenyl-gold carbenoid to afford an allyl-gold species XXIV', which evolves to the final adduct through a stereoselective ring closure (Scheme 21). The scope of the method is rather broad, as it tolerates tertiary and secondary propargyl esters as well as the presence of several different substituents at the azomethine imine component. The picolinic acid-derived gold(III) catalyst Au7 provided the best results.
On the other hand, allenyl acetates of type XXII, resulting from a 1,3-acyloxy migration of propargyl acetates can also participate in myriad gold-catalyzed cycloaddition reactions [82]. In 2006, Gagosz and co-workers reported a gold(I)-catalyzed isomerization of enynyl acetates such as 38 to afford bicyclo[3.1.0]hexenes 40 with excellent yields and stereoselectivities [83]. The authors demonstrated that these reactions are initiated by the 1,3-migration of the ester group to provide an allenyl ester intermediate 39, which could be isolated and further transformed into the final products under the same catalytic conditions [84]. Thus, the authors proposed that the gold(I) catalyst is able to activate these allenic intermediates in situ, triggering a stepwise intramolecular (3 + 2) annulation reaction with the pendant alkene. This cycloaddition provides a cyclic gold carbene species XXV, which is eventually transformed into the final bicyclic adduct by a 1,2-hydrogen shift, with concomitant regeneration of the gold(I) catalyst (Scheme 22). Although the authors did not catalogue this method as a cycloaddition reaction, it can be considered as a pioneering example of a formal gold-catalyzed (3 + 2) intramolecular cycloaddition reaction, occurring in a stepwise fashion. The group of L. Zhang also developed several annulation reactions of allenyl esters generated in situ by a metal-catalyzed 1,3migration of propargyl precursors [85,86]. In particular, they showed that propargyl indole-3-acetates 41 undergo gold(I)-or platinum(II)-catalyzed 1,3-migration to acyloxy allenic esters 42; compounds which evolve in situ in the presence of the same metal catalyst to give adducts resulting from formal (3 + 2) and/ or (2 + 2) annulation processes (Scheme 23). In the presence of Ph 3 PAuCl/AgSbF 6 , the (2 + 2) cycloaddition is favored furnishing 43 (upper arrow) [85]. However, when PtCl 2 (under an atmosphere of CO) is used, the major products are 2,3-indoline-fused cyclopentenes 44, which arise from a formal (3 + 2) cycloaddition (lower arrow) [86]. Thus, the appropriate choice of a Pt or Au catalyst determines whether the allenyl intermediate 42 participates as a 2C-or as a 3C-atom component in the annulation. A precise explanation for this dichotomy has not been specifically addressed.

Cycloadditions initiated by gold-activation of allenes
Several gold catalysts can activate allenes in a very chemoselective way, triggering different types of cycloaddition processes. We have seen in the previous section some examples of cycloadditions involving allenes, in particular with acyloxy allenes, generated in situ by activation of propargyl esters with gold and/or platinum catalysts. It is therefore reasonable to assume that other allenes can also participate in these or related cycloaddition reactions. Indeed, the group of Toste described in 2007 a (2 + 2) intramolecular cycloaddition reaction between allenes and alkenes by gold catalysis [87]. The proposed mechanism is based on an activation of the allene to give a cationic metal species which undergoes a cyclization to give a stabilized carbocation XXVI, usually a benzylic cation (Scheme 24). A subsequent ring closure through the carbon adjacent to the gold atom provides the final cycloadduct 46, featuring a four membered ring carbocycle. Importantly, these reactions could be rendered enantioselective with catalysts derived from DTBM-Segphos or, as recently demonstrated, with gold complexes derived from chiral phosphoramidites [88,89]. Scheme 24: Gold(I)-catalyzed (2 + 2) cycloaddition of allenenes [87].
Also in 2007, L. Zhang and co-workers reported another formal intramolecular cycloaddition between alkenes and allenes, in particular a (3 + 2) cycloaddition between allenyl MOM ethers and alkenes (MOM = methoxymethyl, Scheme 25) [90]. The activation of these allenes by the dichloro(pyridine-2-carboxylato)Au(III) complex Au7 generates an oxocarbenium intermediate XXVII, which undergoes the (3 + 2) annulation with the alkene. The resulting bicyclo[3.1.0] species XXVIII, related to those previously proposed by Gagosz, evolves through a cyclopropane fragmentation and protodeauration to afford the products 48 in good yields and excellent stereoselectivities.
Based on these and other reports demonstrating the ability of gold(I) and platinum(II) catalysts to induce reactions of allenes through cationic intermediates [91][92][93][94], we investigated the possibility of using allenes as allyl cation surrogates, such that they could participate in concerted [4C(4π) + 3C(2π)] cycloadditions with conjugated dienes, a similar process to those previously reported between oxyallyl cations and dienes [95,96]. Initially, we found that PtCl 2 was an excellent catalyst for promoting these intramolecular [4C + 3C] cycloadditions between 1,3-dienes and allenes (Scheme 26) [97]. DFT calculations as well as experimental data agreed with a mechanistic pathway based on the metal activation of the allene to afford a metal-allyl cation intermediate of type XXIX, which subsequently undergoes a concerted (4 + 3) cycloaddition reaction with the diene. The resulting metal carbene species (XXX) eventually evolves through a 1,2-hydrogen shift, leading to seven-membered carbocycles 50 and regenerating the catalyst (PtCl 2 ). In addition, DFT calculations suggested that gold catalysts could be even more active than PtCl 2 . Accordingly, the use of a cationic Au(I) catalyst containing a σ-donating N-heterocyclic carbene ligand (Au6/AgSbF 6 , Scheme 26) enabled these reactions at lower temperatures and increased the scope and synthetic utility of the process [98]. In general, the reactions are completely diastereoselective affording the products as a result of an exo-like approach of the allyl cation to the diene. The reaction tolerates a variety of substituents on the allene and the diene, providing a variety of bicyclo [5.3.0]decane systems in good yields.
Other gold(I) complexes, such as that including a highly donating biaryl di-tert-butylphosphine ligand Au1, also allow these cycloadditions, as recently reported by Gung and by Toste [99][100][101]. In particular, an interesting transannular cycloaddition was performed on the substrate 51 equipped with a furan (4C) and a propargyl acetate, which formally acts as an allene surrogate (Scheme 27).
Based on the electronic similarity between phosphites and phosphoramidites, we also studied enantioselective variants of this cycloaddition using gold complexes derived from this highly versatile type of chiral ligand. We found that it was possible to obtain excellent enantioselectivities with gold complexes derived from bulky phosphoramidites with anthracenyl substituents at 3 and 3' positions of the binaphthol moiety (Au9, Scheme 29) [102]. Almost simultaneously, the group of Toste reported that related phosphoramidite-gold complexes, such as Au10, and the chiral gold catalyst Au11 [104], derived from a C 3 -symmetric phosphite ligand previously developed by Reetz and coworkers [105], are also capable of inducing excellent enantioselectivities in these (4 + 2) cycloaddition reactions of allenedienes. More recently, the group of Fürstner has also reported that Taddol-based phosphoramidite-gold complexes such as Au12 (Scheme 29) are excellent catalysts for these (4 + 2) processes, as well as for the (2 + 2) cycloadditions of eneallenes such as those shown in Scheme 24 [88].
(Scheme 30) [99]. The authors propose stepwise mechanisms proceeding through a common cationic intermediate XXVI, which can evolve into the cyclopentyl cycloadducts via the species XXXI. Alternatively, when the benzylic carbocation in XXVI is intercepted by the carbon atom bearing the gold atom, the (2 + 2) adduct 46 is formed. Nonetheless, the formation of adducts 46 by a ring contraction process in intermediate XXXI cannot be fully discarded. Scheme 31: (3 + 2) versus (2 + 2) Cycloadditions of allenenes [106].
More recently, Fürstner and coworkers have further demonstrated this type of dichotomy depending on the electronic characteristics of the ligands at gold (Figure 2) [106]. In particular, they showed that the π-acceptor properties of NHC ligands such as 59 could be enhanced by introducing a second aromatic layer spanning the imidazopyridine-2-ylidene system, whereas the σ-donating abilities of both ligands remain basically equivalent. As a consequence, the new cyclophanic NHC ligand 60 and the related imidazopyridine-2-ylidene analog 59, generate gold complexes that behave in a divergent manner. While complex 59-AuCl, containing a poor π-acceptor ligand, is able to efficiently induce the (3 + 2) cycloaddition of eneallene 45 (R = Me, X = C(CO 2 Me) 2 , Ar = Ph, n = 1, Scheme 30), a related catalyst with the cyclophanic NHC ligand (60-AuCl) afforded the (2 + 2) cycloadduct with high selectivity and good yield (Scheme 31). From a mechanistic point of view, the authors suggested that both catalysts initially provide the common intermediate XXVI (Scheme 30). Then, a cationic catalyst derived from 59-AuCl could favor the formation of the formal (3 + 2) cycloadduct via intermediate XXXI, that can also be inter-preted as a gold-stabilized carbocationic species. On the contrary, a more electron-deficient catalyst such as 60-AuCl/ AgSbF 6 could favor the formation of intermediate XXXII, in which a cationic center is not directly bound to the gold complex, therefore leading to the (2 + 2) adduct (Scheme 30 and Scheme 31). Importantly, the same NHC-Au complexes were also able to selectively induce either the (4 + 3) or the (4 + 2) cycloadditions of allenedienes 49 (R 1 , R 2 = Me, R 3 = H, X = C(CO 2 Me) 2 ). These examples clearly demonstrate the possibility of modulating the electronic properties of reactive intermediates generated upon activation of allenes with Au(I) complexes, and thereby influence the reaction outcome.
The development of intermolecular variants of gold-catalyzed cycloadditions with allenes remains much less studied, probably due to the inherent difficulties in controlling not only the chemo-but also the regioselectivity of the process. The first examples of an intermolecular cycloaddition with allenes and carbophilic catalysts were reported in 2009 by Iwasawa and consisted of an intermolecular (3 + 2) cycloaddition between allenes and enol silyl ethers, catalyzed by a platinum(II) catalyst [108]. Only in 2011, were the first examples with gold catalysts reported. In particular, an intermolecular (4 + 2) cycloaddition was described by our group between allenamides 61 and conjugated dienes 62 (Scheme 32); a process that provided a straight entry to a variety of differently substituted cyclohexenes 63, and took place with excellent regio-and diastereoselectivity [109]. Almost simultaneously a (4 + 2) cycloaddition between allenyl ethers and dienes was also reported by Goeke using Ph 3 PAuCl/AgSbF 6 as catalyst, although the scope was somewhat more limited. The mechanistic pathways of these reactions are under study (Scheme 32) [110].

Conclusion
In conclusion, in recent years there have been extraordinary advances in the development of gold-catalyzed cycloaddition reactions. The distinctive properties of these metal complexes compared to other, more conventional, transition metal catalysts (e.g., those based on Rh, Ir, Pd, Ru or Ni complexes) and, in particular, their high carbophilicity and ability to stabilize carbocationic intermediates, has allowed researchers to undercover new types of selective and very efficient cycloaddition reactions that would otherwise be unfeasible. Additionally, the scope and versatility of previously reported transition metalcatalyzed cycloaddition reactions (e.g., those based on tungsten or platinum catalysts) could be enhanced by using new gold catalysts. In the future, the current catalogue of cycloaddition reactions catalyzed by gold complexes, and in particular the number of enantioselective versions promoted by chiral gold complexes, is expected to grow.