3 article(s) from Adams, Jonathan D
Figure 1: Batch fabrication process of LSNT-tip SU8 cantilevers. (a) Summarized process flow. (b) SEM image o...
Figure 2: Tip sharpness and durability assessment of the LSNT-tip SU8 cantilevers using a polycrystalline tit...
Figure 3: Comparison of the tapping bandwidth between our tip-integrated SU8 cantilever and a commercial sili...
Figure 1: a) Schematic of the optical drive and detection setup. The drive laser focus can be positioned rela...
Figure 2: a) Measured spectra of the major optical components in the readout design. b) Measurement of the be...
Figure 3: Cantilever drive and deflection readout characterization. a) In contrast to piezo excitation (top c...
Figure 4: Bimodal AFM imaging of a PS/PMMA polymer blend with small, high-frequency cantilevers in both air (...
Figure 5: a) Schematic of the drive amplitude modulation feedback compared with standard amplitude modulation...
Figure 1: This figure shows the cumulative effects of typical distortions on model AFM data. Panels A though ...
Figure 2: Panel A shows the raw data of a calibration grating. Panel B shows the result of line-by-line polyn...
Figure 3: This figure outlines how an image is corrected automatically. There are three main operational bloc...
Figure 4: This figure shows the structure of the processing algorithms for identifying the region to be flatt...
Figure 5: This figure shows the structure used to determine the 1-D offsets present in the image. First, the ...
Figure 6: This figure shows the steps used for the final image correction. First, the 1-D offsets are subtrac...
Figure 7: Comparison of unthresholded 2-D background removal to the full, iterative thresholded background re...