4 article(s) from Oja Acik, Ilona
- Full Research Paper
- Published 06 Dec 2019
-
PDF -
Album-
![]()
Figure 1: Surface views, by scanning electron microscopy (SEM) of 70 nm (a) and 100 nm (b) thick annealed Sb2S...
-
![]()
Figure 2: S L2,3 XES spectra of two Sb2S3 films, as-deposited (“as-dep.”, blue) and after post-deposition tre...
-
![]()
Figure 3: (a) Effect of Sb2S3 absorber thickness on J–V curves at AM1.5G. (b) EQE of solar cells and transmit...
-
![]()
Figure 4: SEM cross-section of the best-performing 5.5% PCE solar cell (100 nm Sb2S3) and the corresponding d...
-
![]()
Figure 5: Photoconversion parameters of 100 nm Sb2S3 solar cells under illumination at AM1.5G as a function o...
-
![]()
Figure 6: Photoconversion parameters of (≈100 nm Sb2S3) solar cells at AM1.5G as a function of storage time. ...
-
![]()
Figure 7: Photoconversion parameters of 100 nm Sb2S3 solar cells without aging (black dots) or after 180 days...
-
-
Supp. Info
- Full Research Paper
- Published 15 Jan 2019
-
PDF -
Album-
![]()
Figure 1: Raman spectra (shifted for visibility) of the as-deposited and thermally treated Sb2S3 films deposi...
-
![]()
Figure 2: XRD patterns (shifted for visibility) of as-deposited and vacuum treated (170 °C or 200 °C, 5 minut...
-
![]()
Figure 3: Surface and cross-sectional views by SEM study of as-deposited Sb2S3 layers deposited from Sb/S 1:6...
-
![]()
Figure 4: Surface and cross-sectional views by SEM study of thermally treated (170 °C, 5 minutes) Sb2S3 layer...
-
![]()
Figure 5: Surface and cross-sectional views by SEM study of vacuum treated (200 °C, 5 minutes) Sb2S3 layers d...
-
![]()
Figure 6: Proposed growth mechanism paths of Sb2S3 by Volmer–Weber growth during ultrasonic spraying of metha...
-
![]()
Figure 7: Absorption coefficient (α) vs wavelength of glass/ITO/TiO2/Sb2S3 samples incorporating as-deposited...
-
-
Supp. Info
- Full Research Paper
- Published 10 Nov 2016
-
PDF -
Album-
![]()
Figure 1: Raman spectra A–D of thin layers grown by spraying solutions with Sb/S precursor ratios of 1:9 to 1...
-
![]()
Figure 2: SEM images of Sb2S3 crystalline flakes grown by spraying solutions with a precursor ratio of 1:6 on...
-
![]()
Figure 3: Cross-sectional SEM image of the glass/ITO/TiO2/Sb2S3 structure, the topmost Sb2S3 layer consists o...
-
![]()
Figure 4: A: Absorption coefficient α of Sb2S3 layers of nanoparticles grown by ultrasonic CSP with 3–9 depos...
-
![]()
Figure 5: Tauc plot of the optical transmittance spectra of the glass/ITO/TiO2/Sb2S3 layer stack, using α fro...
-
![]()
Figure 6: A: Cross-sectional SEM image of the glass/ITO/TiO2/Sb2S3/P3HT/Au solar cell, the 5-cycle Sb2S3 laye...
-
![]()
Figure 7: External quantum efficiency of glass/ITO/TiO2/Sb2S3/P3HT/Au solar cells. Sb2S3 layer was grown by s...
-
-
Supp. Info
- Letter
- Published 12 Dec 2014
-
PDF -
Album-
![]()
Figure 1: Sketch of the cross-section of the Au-NP/ZnO/In2S3/CuInS2 solar cell (A), and of the ZnO/In2S3/CuInS...
-
![]()
Figure 2: External quantum efficiency (EQE) of a plasmonic solar cell employing Au-NPs on top of an ITO layer...
-
![]()
Figure 3: Left: External quantum efficiency (EQE) of ITO/ZnO/In2S3/CuInS2/Au-NP solar cells (red line) and EQ...
-
![]()
Figure 4: Spectra of the relative increase in ∆EQE for the ITO/ZnO/In2S3/CuInS2/Au-NP solar cells when compar...
-
![]()
Figure 5: SEM image and EBIC image of the cross-section of the ZnO/In2S3/CuInS2/Au-NP solar cell prepared by ...
-
