Beyond the shell: exploring polymer–lipid interfaces in core–shell nanofibers to carry hyaluronic acid and β-caryophyllene

• Aline Tavares da Silva Barreto,
• Francisco Alexandrino-Júnior,
• Bráulio Soares Arcanjo,
• Paulo Henrique de Souza Picciani and
• Kattya Gyselle de Holanda e Silva

Beilstein J. Nanotechnol. 2025, 16, 2015–2033, doi:10.3762/bjnano.16.139

• innovative strategies to ensure their compatibility and sustained activity. This study addresses this critical challenge through the rational design and fabrication of hybrid core–shell nanofibers manufactured via coaxial electrospinning. Poly(lactic acid) (PLA) was used as an outer shell providing

• encapsulated within a PLA shell, highlighting substantial potential for biomedical applications by overcoming key material integration hurdles. Keywords: co-axial nanofibers; electrospinning; hybrid nanosystem; nanofibers; nanoemulsion; poly(lactic acid); Introduction Driven by the significant potential of

• degradation, and moderate hydrophilicity, but also biocompatibility, non-toxicity, and non-carcinogenicity [5]. Adhering to these critical quality requirements for biomedical products, polylactic acid (PLA) was selected for nanofiber production. This biotechnologically derived aliphatic polyester is a rigid

Exploring the potential of polymers: advancements in oral nanocarrier technology

• Rousilândia de Araujo Silva,
• Igor Eduardo Silva Arruda,
• Luise Lopes Chaves,
• Mônica Felts de La Roca Soares and
• Jose Lamartine Soares Sobrinho

Beilstein J. Nanotechnol. 2025, 16, 1751–1793, doi:10.3762/bjnano.16.122

Venom-loaded cationic-functionalized poly(lactic acid) nanoparticles for serum production against Tityus serrulatus scorpion

• Philippe de Castro Mesquita,
• Karla Samara Rocha Soares,
• Manoela Torres-Rêgo,
• Emanuell dos Santos-Silva,
• Mariana Farias Alves-Silva,
• Alianda Maira Cornélio,
• Matheus de Freitas Fernandes-Pedrosa and
• Arnóbio Antônio da Silva-Júnior

Beilstein J. Nanotechnol. 2025, 16, 1633–1643, doi:10.3762/bjnano.16.115

• polymers such as poly(lactic acid) (PLA) has been investigated [13]. The nanoparticles produced using these synthetic polyesters show neutral or negative zeta potential, which limits the loading of negatively charged macromolecules such as proteins, polypeptides, or DNA [14][20]. The surface of

• charged peptides, proteins, antigens, oligonucleotides, polypeptides, or DNA [18]. The PLA is well established to produce nanoparticles as carriers for drugs or biomolecules from a biotechnology source due to its natural metabolism pathway [25][26]. In a recent study, PLA was successfully employed to

• nanoparticulate formulations based on biodegradable polymers such as PLA have been investigated [13][27][28][29][30][31][32]. A more detailed approach for use of a delivery system as a new nontoxic and non-inflammatory immunoadjuvant is of great importance to public health. The present study was designed with the

Bioinspired polypropylene-based functionally graded materials and metamaterials modeling the mistletoe–host interface

• Lina M. Rojas González,
• Naeim Ghavidelnia,
• Christoph Eberl and
• Max D. Mylo

Beilstein J. Nanotechnol. 2025, 16, 1592–1606, doi:10.3762/bjnano.16.113

• polymers. To obtain laminates with either rectilinear or V-shaped sinker-inspired interfaces, two grids were 3D-printed using PLA polymeric filament, each with seven compartments and corresponding interface structures (Figure 2A,B). In both designs, the extruded polymer blends were distributed between the

Laser processing in liquids: insights into nanocolloid generation and thin film integration for energy, photonic, and sensing applications

• Akshana Parameswaran Sreekala,
• Pooja Raveendran Nair,
• Jithin Kundalam Kadavath,
• Bindu Krishnan,
• David Avellaneda Avellaneda,
• M. R. Anantharaman and
• Sadasivan Shaji

Beilstein J. Nanotechnol. 2025, 16, 1428–1498, doi:10.3762/bjnano.16.104

• foundational understanding, without investigating the extensive details that other reviews have already explored. The fundamental chemical and physical aspects of pulsed laser ablation (PLA) processes, with a focus on the evolution of material from the target to the deposited film, were explained by Ashfold et

• polymers, and are suitable for film fabrication using spin coating under optimal conditions. 2.2 Drop casting Colloidal indium oxide (In2O3) NPs were synthesized using PLA of indium in water at room temperature. The thin film of In2O3 NPs was deposited on a n-type silicon by drop casting for heterojunction

The role of biochar in combating microplastic pollution: a bibliometric analysis in environmental contexts

• Tuan Minh Truong Dang,
• Thao Thu Thi Huynh,
• Guo-Ping Chang-Chien and
• Ha Manh Bui

Beilstein J. Nanotechnol. 2025, 16, 1401–1416, doi:10.3762/bjnano.16.102

• ) MPs significantly reduce total exchangeable cations (Na+, K+, Mg2+, and Ca2+) by 4–6% [58]. Additionally, non-biodegradable MPs such as PE and PVC inhibit organic phosphate mineralization, alkaline phosphatase activity, and inorganic phosphate solubilization. By contrast, biodegradable MPs such as PLA

• do not affect alkaline phosphatase activity [59]. MPs also reduce available phosphorus (Olsen-P) levels by 9.7–38.6% (PE, PVC) and 38.4–73.6% polyactide (PLA) [60]. Furthermore, MPs compete with plant roots for phosphate adsorption, with distribution coefficients (Kd) in the order PVC (5.19 L/kg

• ) > PE (4.23 L/kg) > PLA (2.48 L/kg) [60]. Biochar amendments can alleviate these chemical imbalances. For example, cotton and corn biochar added to soil contaminated with aged plastic mulch can increase Olsen-P levels by up to 46.6% during cotton cultivation [61]. These findings demonstrate the dual

Parylene-coated platinum nanowire electrodes for biomolecular sensing applications

• Chao Liu,
• Peker Milas,
• Michael G. Spencer and
• Birol Ozturk

Beilstein J. Nanotechnol. 2025, 16, 1392–1400, doi:10.3762/bjnano.16.101

• the custom-built cuvette that was constructed with a 3D-printed PLA frame and two 18 mm × 18 mm cover glass pieces placed on two sides. A pair of tapered tungsten rods were immersed in the 75 mM platinum(IV) chloride (ALDRICH 96%) and 100 mM NaCl solution as depicted in Figure 5c; the addition of NaCl

Enhancing the therapeutical potential of metalloantibiotics using nano-based delivery systems

• Alejandro Llamedo,
• Marina Cano,
• Raquel G. Soengas and
• Francisco J. García-Alonso

Beilstein J. Nanotechnol. 2025, 16, 1350–1366, doi:10.3762/bjnano.16.98

• example, Gasser and co-workers disclosed the encapsulation of the Ru(II) polypyridyl complexes 18 (Figure 5) in nanoconjugates of poly(lactic acid) (PLA) with varying molecular weights [127]. Nanoprecipitation produced narrowly dispersed nanoparticles with high ruthenium loadings (up to 53%), as confirmed

• metallodrug showed activity against Gram-negative bacteria, Ru-PLA nanoconjugates displayed moderate bactericidal activity against Gram-positive strains (Figure 6). Liposomes are also suitable nano-based delivery systems for antibacterial Ru complexes. A relevant example is the lipoformulation of the

• antibacterial ruthenium, iridium, and cobalt complexes. Antibacterial activity of Ru(II)-PLA nanoconjugates compared to free Ru(II) complex. Schematic representation of the aPDT mechanism using Ir-lipid-based liposomes. Nanotechnology-based systems used for metalloantibiotic delivery.

Supramolecular hydration structure of graphene-based hydrogels: density functional theory, green chemistry and interface application

• Hon Nhien Le,
• Duy Khanh Nguyen,
• Minh Triet Dang,
• Huyen Trinh Nguyen,
• Thi Bang Tam Dao,
• Trung Do Nguyen,
• Chi Nhan Ha Thuc and
• Van Hieu Le

Beilstein J. Nanotechnol. 2025, 16, 806–822, doi:10.3762/bjnano.16.61

• , leading to facile brush coating on plastic films of polylactide (PLA). Dehydrated GO-SG-ZH coating is adhered to the PLA substrate through interfacial interactions. Furthermore, antibacterial activities, coating stability, and mechanical properties of the nanocomposite materials were investigated and

• hydroxide hydrogel on polylactide film At first, commercial polylactide granules (PLA Luminy LX175, TotalEnergies Corbion) was put in a steel mold for thermal compression at 190 °C to produce a PLA plate. A piece of the PLA plate was put in a thin plastic mold (polyethylene terephthalate) for thermal

• compression at 190 °C. As a result, thin and transparent PLA films were made with the average thickness of 0.2 mm. In the next stage, the GO-SG-ZH nanocomposite in hydrogel form (≈95% water) was used as an aqueous paint for brush coating on PLA thin films. After brush coating, the coated films were left to

Synthetic-polymer-assisted antisense oligonucleotide delivery: targeted approaches for precision disease treatment

• Ana Cubillo Alvarez,
• Dylan Maguire and
• Ruairí P. Brannigan

Beilstein J. Nanotechnol. 2025, 16, 435–463, doi:10.3762/bjnano.16.34

• following studies, Zhao et al. developed a novel siRNA delivery system using PLR as a condensing block in the formation of cationic micellar nanoparticles [98]. In this report, biodegradable amphiphilic triblock copolymers composed of monomethoxy poly(ethylene glycol) (mPEG), poly(ᴅ,ʟ-lactide) (PLA), and

Recent advances in photothermal nanomaterials for ophthalmic applications

• Jiayuan Zhuang,
• Linhui Jia,
• Chenghao Li,
• Rui Yang,
• Jiapeng Wang,
• Wen-an Wang,
• Heng Zhou and
• Xiangxia Luo

Beilstein J. Nanotechnol. 2025, 16, 195–215, doi:10.3762/bjnano.16.16

• damage to surrounding tissues due to inadequate control over the heat distribution [100][101][102][103][104][105]. Innovations in this field have led to the development of transparent polylactic acid (PLA) thin films with embedded iron oxide nanoclusters prepared via spin coating [51]. The efficient

• photothermal conversion of iron oxide minimizes the necessary laser energy. The mechanical force generated by laser-induced VNBs enables the selective destruction of single corneal cells. The PLA films aid in precisely positioning the photothermal therapy, restrain the dispersion of iron oxide nanoclusters

• , and can be easily removed post-laser treatment. The spatially selective single-cell killing capability of iron oxide PLA bubble films has great potential for ocular tumor therapy. However, clinical treatment of tumors requires the application of films on surfaces with “odd” tissues. Using a

Nanocarriers and macrophage interaction: from a potential hurdle to an alternative therapeutic strategy

• Naths Grazia Sukubo,
• Paolo Bigini and
• Annalisa Morelli

Beilstein J. Nanotechnol. 2025, 16, 97–118, doi:10.3762/bjnano.16.10

• promise in mitigating inflammation and promoting tumoricidal macrophage polarization. For inflammatory diseases like IBD, targeting pro-inflammatory cytokines with siRNA has proven effective. Laroui et al. developed polymeric NPs made of poly(lactic acid)–poly(ethylene glycol) block copolymer (PLA-PEG

Nanotechnological approaches for efficient N2B delivery: from small-molecule drugs to biopharmaceuticals

• Selin Akpinar Adscheid,
• Akif E. Türeli,
• Nazende Günday-Türeli and
• Marc Schneider

Beilstein J. Nanotechnol. 2024, 15, 1400–1414, doi:10.3762/bjnano.15.113

• [77]. In addition to biopolymers, synthetic biodegradable and biocompatible polymers such as poly(lactic acid) (PLA) and poly(lactic-co-glycolic acid) (PLGA), which are approved by the US Food and Drug Administration (FDA) for human administration [78] are relevant options. Extensive testing has been

Recent updates in applications of nanomedicine for the treatment of hepatic fibrosis

• Damai Ria Setyawati,
• Fransiska Christydira Sekaringtyas,
• Riyona Desvy Pratiwi,
• A’liyatur Rosyidah,
• Rohimmahtunnissa Azhar,
• Nunik Gustini,
• Gita Syahputra,
• Idah Rosidah,
• Etik Mardliyati,
• Tarwadi and
• Sjaikhurrizal El Muttaqien

Beilstein J. Nanotechnol. 2024, 15, 1105–1116, doi:10.3762/bjnano.15.89

• upon daily systemic administration through the intraperitoneal route in mice [54]. Another polymeric platform to improve the bioavailability of curcumin was developed through simple nanoemulsification using biodegradable polylactide–poly(ethylene glycol) (PLA-PEG) copolymer NPs [55]. Besides reversing

• the elevation of plasma enzyme activity of aspartate transaminase (ALT) and alanine transaminase (AST), the orally administered curcumin loaded PLA-PEG NPs successfully improved the in vivo structure of the liver and reduced microvesicular steatosis, congestion of erythrocytes, and the infiltration of

• inflammatory cells. Both PLA and PEG have been authorized by the FDA. The low molecular weight of PLA is preferable to construct nanocarriers because of its relatively fast degradation rate with non-toxic degradation products (H2O and CO2) [56]. Regarding liposomal platforms, Thant and co-workers encapsulated

Therapeutic effect of F127-folate@PLGA/CHL/IR780 nanoparticles on folate receptor-expressing cancer cells

• Thi Ngoc Han Pham,
• Phuong-Thao Dang-Luong,
• Hong-Phuc Nguyen,
• Loc Le-Tuan,
• Xuan Thang Cao,
• Thanh-Danh Nguyen,
• Vy Tran Anh and
• Hieu Vu_Quang

Beilstein J. Nanotechnol. 2024, 15, 954–964, doi:10.3762/bjnano.15.78

• ) (PLA) and poly(glycolic acid) (PGA), has been employed in the synthesis of nanoparticles for cancer diagnostics and therapy because of its excellent biocompatibility and biodegradability [1][2][3]. PLGA nanoparticles can be prepared via a variety of techniques, including single emulsion, double

Nanomedicines against Chagas disease: a critical review

• Maria Jose Morilla,
• Kajal Ghosal and
• Eder Lilia Romero

Beilstein J. Nanotechnol. 2024, 15, 333–349, doi:10.3762/bjnano.15.30

• , and resulted in 100% survival of an acute murine model [70]. Either orally or intravenously administered to acute and chronic murine models, poly(ᴅ,ʟ-lactide)-block-polyethylene glycol nanocapsules loaded with lychnopholide (LYC-PLA-PEG NCs), a lipophilic sesquiterpene lactone isolated from

• Lychnophora trichocarpha of poor solubility, which is degraded at extreme pH values, showed improved efficacy against T. cruzi infection. The most relevant results in the acute model were that equal cure rates were obtained for oral LYC-PLA-PEG-NCs and BNZ (62.5%). In contrast, intravenous LYC-PLA-PEG NCs

• chronic model were that oral LYC-PLA-PEG-NCs yielded a 55.6% cure rate vs 0% for BNZ and free LYC. Intravenous LYC-PLA-PEG-NCs yielded a 50.0% cure rate vs 0% for free LYC and BNZ [72]. Intravenous LYC-PLA-PEG NCs increased 16-fold the body exposure, 26-fold the plasma half-life, and reduced 17-fold the

Nanocarrier systems loaded with IR780, iron oxide nanoparticles and chlorambucil for cancer theragnostics

• Phuong-Thao Dang-Luong,
• Hong-Phuc Nguyen,
• Loc Le-Tuan,
• Xuan-Thang Cao,
• Vy Tran-Anh and
• Hieu Vu Quang

Beilstein J. Nanotechnol. 2024, 15, 180–189, doi:10.3762/bjnano.15.17

• and IR783 are also promising diagnostic choices. Encapsulation of IR780 in nanoparticles can be used for imaging and photothermal, photodynamic, and combinatorial cancer therapies [20][21][22]. IR780 is also utilized in PEG-PLA nanoparticles for photodynamic therapy of human breast cancer cells [23

Berberine-loaded polylactic acid nanofiber scaffold as a drug delivery system: The relationship between chemical characteristics, drug-release behavior, and antibacterial efficiency

• Le Thi Le,
• Hue Thi Nguyen,
• Liem Thanh Nguyen,
• Huy Quang Tran and
• Thuy Thi Thu Nguyen

Beilstein J. Nanotechnol. 2024, 15, 71–82, doi:10.3762/bjnano.15.7

• Sciences, Phenikaa University, Hanoi 12116, Vietnam 10.3762/bjnano.15.7 Abstract Hydrophobic berberine powder (BBR) and hydrophilic BBR nanoparticles (BBR NPs) were loaded into an electrospun polylactic acid (PLA) nanofiber scaffold for modulating the release behavior of BBR in an aqueous medium. The BBR

• release from the BBR/PLA and BBR NPs/PLA nanofiber scaffolds was investigated in relation to their chemical characteristics, BBR dispersion into nanofibers, and wettability. The BBR release profiles strongly influenced the antibacterial efficiency of the scaffolds over time. When the BBR was loaded, the

• BBR/PLA nanofiber scaffold exhibited an extremely hydrophobic feature, causing a triphasic release profile in which only 9.8 wt % of the loaded BBR was released in the first 24 h. This resulted in a negligible inhibitory effect against methicillin-resistant Staphylococcus aureus bacteria. Meanwhile

ZnO-decorated SiC@C hybrids with strong electromagnetic absorption

• Liqun Duan,
• Zhiqian Yang,
• Yilu Xia,
• Xiaoqing Dai,
• Jian’an Wu and
• Minqian Sun

Beilstein J. Nanotechnol. 2023, 14, 565–573, doi:10.3762/bjnano.14.47

• Liqun Duan Zhiqian Yang Yilu Xia Xiaoqing Dai Jian'an Wu Minqian Sun State Key Laboratory of Disaster Prevention & Mitigation of Explosion & Impact, Army Engineering University of PLA. Nanjing 210007, P.R. China 10.3762/bjnano.14.47 Abstract A novel strategy is provided to improve the absorption

Roll-to-roll fabrication of superhydrophobic pads covered with nanofur for the efficient clean-up of oil spills

• Patrick Weiser,
• Robin Kietz,
• Marc Schneider,
• Matthias Worgull and
• Hendrik Hölscher

Beilstein J. Nanotechnol. 2022, 13, 1228–1239, doi:10.3762/bjnano.13.102

• (PE), and polycarbonate (PC), we obtained the best results by sandblasting the roller first with 0.8–1.2 mm cast iron particles and subsequently with white corundum with a particle size of 53–75 µm. For polylactide (PLA), smaller corundum particles with a size of 8–10 µm had to be used for the second

Microneedle-based ocular drug delivery systems – recent advances and challenges

• Piotr Gadziński,
• Anna Froelich,
• Monika Wojtyłko,
• Antoni Białek,
• Julia Krysztofiak and
• Tomasz Osmałek

Beilstein J. Nanotechnol. 2022, 13, 1167–1184, doi:10.3762/bjnano.13.98

• ], polyvinyl alcohol (PVA) [123], and polymethacrylates [118][124][125]. Among the biodegradable materials, carbohydrates, including maltose [126], trehalose [127], and sucrose [128], are frequently mentioned. Moreover, biodegradable polymers such as poly(lactic acid) (PLA) [129], poly(glycolic acid) (PGA

• (PEGDA) [132] and poly(acrylic-co-maleic) acid (PAMA) [133]. It is also important to notice that there are numerous studies describing the use of composite materials containing combinations of various substances, both organic and inorganic. For example, studies involving PLA and carbon nanotubes [134

• ], calcium sulfate and gelatin [135], gelatin and hydroxyapatite [136], and PLGA microparticles combined with PLA [137] are available in the scientific literature. Taking into consideration the shape and geometry of microneedles, they can be categorized as pyramids, cones, arrowheads, cylinders, bullets

Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration

• Se-Kwon Kim,
• Sesha Subramanian Murugan,
• Pandurang Appana Dalavi,
• Sebanti Gupta,
• Sukumaran Anil,
• Gi Hun Seong and
• Jayachandran Venkatesan

Beilstein J. Nanotechnol. 2022, 13, 1051–1067, doi:10.3762/bjnano.13.92

• . Different kinds of polymeric materials have been utilized including chitosan, alginate, fucoidan, carrageenan, and ulvan from natural polymeric materials. Polycaprolactone (PCL), poly ᴅ,ʟ-lactic-co-glycolic acid (PLGA), and polylactic acid (PLA) have been extensively studied with hydroxyapatite to develop

Gelatin nanoparticles with tunable mechanical properties: effect of crosslinking time and loading

• Agnes-Valencia Weiss,
• Daniel Schorr,
• Julia K. Metz,
• Metin Yildirim,
• Saeed Ahmad Khan and
• Marc Schneider

Beilstein J. Nanotechnol. 2022, 13, 778–787, doi:10.3762/bjnano.13.68

• . demonstrated the impact of the measurement setup for polymeric nanoparticles [4]. Young’s moduli obtained by measurements conducted on bulk materials and nanoparticles composed of PLA and PLGA vary significantly from each other. Furthermore, they showed the impact of measurements in water and at physiological

Fabrication and testing of polymer microneedles for transdermal drug delivery

• Vahid Ebrahiminejad,
• Zahra Faraji Rad,
• Philip D. Prewett and
• Graham J. Davies

Beilstein J. Nanotechnol. 2022, 13, 629–640, doi:10.3762/bjnano.13.55

• their biocompatibility, biodegradability, and potential for mass production [12]. Polymers such as polylactic acid (PLA), poly(methyl methacrylate) (PMMA), poly(carbonate), cyclic olefin copolymer (COC) and cycloolefin polymers (COP), polystyrene, and SU-8 photoresists, have all been used for

• the viscoelastic nature of Zeonor 1060R, the initial near-tip failure was indistinct on the force-displacement diagram. These mechanical responses have been previously observed during compression tests on polymeric MN materials, including carboxymethyl cellulose (CMC) and polylactic acid (PLA) [1][38

Micro- and nanotechnology in biomedical engineering for cartilage tissue regeneration in osteoarthritis

• Zahra Nabizadeh,
• Mahmoud Nasrollahzadeh,
• Hamed Daemi,
• Mohamadreza Baghaban Eslaminejad,
• Ali Akbar Shabani,
• Mehdi Dadashpour,
• Majid Mirmohammadkhani and
• Davood Nasrabadi

Beilstein J. Nanotechnol. 2022, 13, 363–389, doi:10.3762/bjnano.13.31

• and tailoring method for the construction of the scaffold. Researchers have assessed the effects of different morphologies of a polylactide (PLA) fiber-based scaffold [microfiber scaffold (MS) and nanofiber-coated microfiber scaffold (NMS)] on the behavior of human articular chondrocytes [108

• improve the expression of the chondrogenic phenotype [110]. Fragmented PLA fibers incorporated into HA-grafted alginate hydrogel have been shown to increase the compressive modulus by approximately 81% compared to the nanofiber-free hydrogel scaffolds. Moreover, they maintained the round phenotype of the

• the expressions of chondrogenic markers and appreciably repopulated the defective cartilage site compared to pellet culture and PVA fibers. In line with this, the application of a resveratrol–PLA–gelatin scaffold in a rat articular cartilage defect model promoted the repair of cartilage injury and had