Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers

• Rasheed Atif and
• Fawad Inam

Beilstein J. Nanotechnol. 2016, 7, 1174–1196, doi:10.3762/bjnano.7.109

• dispersion state of filler as multilayered graphene (MLG) and carbon nanotubes (CNTs) tend to agglomerate due to van der Waals forces. The agglomeration can be avoided by using organic solvents, selecting suitable dispersion and production methods, and functionalizing the fillers. Another proposed method is

• for both current and prospective researchers in the field of MLG- and CNT-based polymer nanocomposites to achieve maximum enhancement in mechanical, thermal, and electrical properties of produced polymer nanocomposites. Keywords: agglomeration; carbon nanotubes (CNTs); dispersion state; multilayered

• results in strong interfacial interactions. Polymer composite theory foretells improved mechanical properties due to improved interfacial bonding [3]. In addition, due to the high thermal and electrical conductivities of multilayered graphene (MLG) and carbon nanotubes (CNTs), thermally and electrically

Photocurrent generation in carbon nanotube/cubic-phase HfO₂ nanoparticle hybrid nanocomposites

• Protima Rauwel,
• Augustinas Galeckas,
• Martin Salumaa,
• Frédérique Ducroquet and
• Erwan Rauwel

Beilstein J. Nanotechnol. 2016, 7, 1075–1085, doi:10.3762/bjnano.7.101

• combination of nanoparticles with carbon nanotubes (CNTs) has proven to greatly broaden the area of potential applications, such as gas sensors [1][2], solar cells [3][4], bioimaging [5] and IR detectors [6], most of which require efficient charge transfer from the nanoparticle to the CNT and charge

Customized MFM probes with high lateral resolution

• Óscar Iglesias-Freire,
• Miriam Jaafar,
• Eider Berganza and
• Agustina Asenjo

Beilstein J. Nanotechnol. 2016, 7, 1068–1074, doi:10.3762/bjnano.7.100

• , either by using focused ion beam (FIB) milled tips [1][2], electron beam deposited tips [3][4] or stencil-deposited metal dots onto an AFM tip [5]. Following a different approach, probes with carbon nanotubes (CNTs) have been fabricated for MFM imaging either by mechanical attachment [6][7][8] or direct

Comparison of the interactions of daunorubicin in a free form and attached to single-walled carbon nanotubes with model lipid membranes

• Dorota Matyszewska

Beilstein J. Nanotechnol. 2016, 7, 524–532, doi:10.3762/bjnano.7.46

• -stranded DNA or RNA sequences showing high specificity and affinity to their targets, which were employed as molecular targeting agents for targeted drug transport. Carbon nanotubes (CNTs) are among the promising drug delivery systems. They attract scientists’ attention due to their properties such as

Free vibration of functionally graded carbon-nanotube-reinforced composite plates with cutout

• Mostafa Mirzaei and
• Yaser Kiani

Beilstein J. Nanotechnol. 2016, 7, 511–523, doi:10.3762/bjnano.7.45

• -mechanical properties, carbon nanotubes (CNTs) have attracted increasing attention in the past decades. CNTs are a promising candidate for the reinforcement of the matrix phase in a composite. Kwon et al. [1] reported that using a powder metallurgy fabrication process, carbon-nanotube-reinforced composites

Synthesis and applications of carbon nanomaterials for energy generation and storage

• Marco Notarianni,
• Jinzhang Liu,
• Kristy Vernon and
• Nunzio Motta

Beilstein J. Nanotechnol. 2016, 7, 149–196, doi:10.3762/bjnano.7.17

• able to generate, store and transport electricity in a clean and more efficient way and with smaller space requirements. Specifically, the use of nanostructured allotrope forms of carbon and derivatives such as fullerenes, carbon nanotubes (CNTs) and graphene have been widely investigated over the past

• it with o-dichlorobenzene solution or with trifluoroacetic acid (Figure 8) [36]. Carbon nanotubes Carbon nanotubes (CNTs), discovered by Ijima in 1991 [37], are another allotrope form of carbon with a cylindrical structure. The unique structure of CNTs results in many extraordinary properties. Since

Application of biclustering of gene expression data and gene set enrichment analysis methods to identify potentially disease causing nanomaterials

• Andrew Williams and
• Sabina Halappanavar

Beilstein J. Nanotechnol. 2015, 6, 2438–2448, doi:10.3762/bjnano.6.252

• black (CB) or carbon nanotubes (CNTs) to determine the disease significance of these data-driven gene sets. Results: Biclusters representing inflammation (chemokine activity), DNA binding, cell cycle, apoptosis, reactive oxygen species (ROS) and fibrosis processes were identified. All of the NM studies

• toxicity induced by nanoparticles of titanium dioxide (nano-TiO2) [46][47][48] and carbon nanotubes (CNTs) [49][50] of various sizes and properties. This work identified the properties of nano-TiO2 that influence their inflammogenic potential [51]. These studies have generated a large repository of gene

NanoE-Tox: New and in-depth database concerning ecotoxicity of nanomaterials

• Katre Juganson,
• Angela Ivask,
• Irina Blinova,
• Monika Mortimer and
• Anne Kahru

Beilstein J. Nanotechnol. 2015, 6, 1788–1804, doi:10.3762/bjnano.6.183

• database NanoE-Tox that is available as Supporting Information File 2. The database is based on existing literature on ecotoxicology of eight ENMs with different chemical composition: carbon nanotubes (CNTs), fullerenes, silver (Ag), titanium dioxide (TiO2), zinc oxide (ZnO), cerium dioxide (CeO2), copper

• : carbon nanotubes (CNTs), fullerenes, silver (Ag), titanium dioxide (TiO2), zinc oxide (ZnO), cerium dioxide (CeO2), copper oxide (CuO), and iron oxide (FeOx; Fe2O3, Fe3O4). Furthermore, all these ENMs, except CuO, are listed by the Organisation for Economic Co-operation and Development (OECD) Working

Possibilities and limitations of advanced transmission electron microscopy for carbon-based nanomaterials

• Xiaoxing Ke,
• Carla Bittencourt and
• Gustaaf Van Tendeloo

Beilstein J. Nanotechnol. 2015, 6, 1541–1557, doi:10.3762/bjnano.6.158

• nanoparticles were also essential ingredients in inks and printing pastes used over centuries in various cultures [17]. Another example are carbon nanotubes (CNTs) [18] which found their way into the secret recipe of ultra-sharp Damascus steel, which dates back to seventeenth century, and are believed to be

Interaction of electromagnetic radiation in the 20–200 GHz frequency range with arrays of carbon nanotubes with ferromagnetic nanoparticles

• Agylych Atdayev,
• Alexander L. Danilyuk and
• Serghej L. Prischepa

Beilstein J. Nanotechnol. 2015, 6, 1056–1064, doi:10.3762/bjnano.6.106

• nanocomposites are prospects for memory storage, emission and high frequency devices. New magnetic nanocomposites based on carbon nanotubes (CNTs) [1][2][3] are very promising for high frequency applications [4][5][6][7][8][9][10][11][12][13][14] such as transmission lines, mixtures and detectors [15][16][17

Applications of three-dimensional carbon nanotube networks

• Manuela Scarselli,
• Paola Castrucci,
• Francesco De Nicola,
• Ilaria Cacciotti,
• Francesca Nanni,
• Emanuela Gatto,
• Mariano Venanzi and
• Maurizio De Crescenzi

Beilstein J. Nanotechnol. 2015, 6, 792–798, doi:10.3762/bjnano.6.82

• supports [10], and super capacitors [11]. In this research field, architectures based on carbon nanotubes (CNTs) are the focus of intense research activity [2]. Since CNTs are one-dimensional structures with well-known electrical and mechanical properties, they are the ideal building blocks for

Observation of a photoinduced, resonant tunneling effect in a carbon nanotube–silicon heterojunction

• Carla Aramo,
• Antonio Ambrosio,
• Michelangelo Ambrosio,
• Maurizio Boscardin,
• Paola Castrucci,
• Michele Crivellari,
• Marco Cilmo,
• Maurizio De Crescenzi,
• Francesco De Nicola,
• Emanuele Fiandrini,
• Valentina Grossi,
• Pasqualino Maddalena,
• Maurizio Passacantando,
• Sandro Santucci,
• Manuela Scarselli and
• Antonio Valentini

Beilstein J. Nanotechnol. 2015, 6, 704–710, doi:10.3762/bjnano.6.71

• that are aligned only at a certain applied voltage. In the case of carbon nanotubes (CNTs), a number of cases have been reported in which this effect has been observed both for single-walled as well as for double-walled CNTs [3][4][5]. In this work, a photosensitive junction was fabricated which

Electrical response of liquid crystal cells doped with multi-walled carbon nanotubes

• Amanda García-García,
• Ricardo Vergaz,
• José F. Algorri,
• Xabier Quintana and
• José M. Otón

Beilstein J. Nanotechnol. 2015, 6, 396–403, doi:10.3762/bjnano.6.39

• carbon nanotubes (CNTs) and the possibility of reorienting them with external fields [3][4][5][6]. The interest to control this reorientation arises from the possibility of preparing simple devices whose electrical conductivity can be externally controlled and modulated [5][6][7][8][9]. Due to their

Release behaviour and toxicity evaluation of levodopa from carboxylated single-walled carbon nanotubes

• Julia M. Tan,
• Jhi Biau Foo,
• Sharida Fakurazi and
• Mohd Zobir Hussein

Beilstein J. Nanotechnol. 2015, 6, 243–253, doi:10.3762/bjnano.6.23

• of the diseased cells. Generally, drug carriers can be categorized into four major groups: inorganic nanoparticles [2][3], recombinant proteins [4], viral or non-viral carriers [5] and organic cationic compounds [6]. Recently, inorganic nanoparticles such as carbon nanotubes (CNTs) were subjected to

Synthesis of boron nitride nanotubes and their applications

• Saban Kalay,
• Zehra Yilmaz,
• Ozlem Sen,
• Melis Emanet,
• Emine Kazanc and
• Mustafa Çulha

Beilstein J. Nanotechnol. 2015, 6, 84–102, doi:10.3762/bjnano.6.9

• ; chemical modifications; medical applications; synthesis methods; toxicity; Review Introduction Boron nitride nanotubes (BNNTs) are known as structural analogs of carbon nanotubes (CNTs) but with superior properties [1][2][3]. Although they have structural similarities, they significantly differ in their

Liquid-phase exfoliated graphene: functionalization, characterization, and applications

• Mildred Quintana,
• Jesús Iván Tapia and
• Maurizio Prato

Beilstein J. Nanotechnol. 2014, 5, 2328–2338, doi:10.3762/bjnano.5.242

• such as fullerenes and carbon nanotubes (CNTs) [23][24][25]. Using these solvents, it is possible to exfoliate graphite, resulting in defect-free graphene layers of high concentration. One limitation of this methodology is its inability to completely eliminate the absorbed solvent from the graphene

Nanobioarchitectures based on chlorophyll photopigment, artificial lipid bilayers and carbon nanotubes

• Marcela Elisabeta Barbinta-Patrascu,
• Stefan Marian Iordache,
• Ana Maria Iordache,
• Nicoleta Badea and
• Camelia Ungureanu

Beilstein J. Nanotechnol. 2014, 5, 2316–2325, doi:10.3762/bjnano.5.240

• interest in the fields of nanotechnology and biomedicine [1][2][3]. Special attention has been paid to biomimetic membranes that convey biocompatibility to the hybrid materials [4][5][6][7]. One of the building blocks used to construct nanomaterials are carbon nanotubes (CNTs), which are allotropes of

Advances in NO₂ sensing with individual single-walled carbon nanotube transistors

• Kiran Chikkadi,
• Matthias Muoth,
• Cosmin Roman,
• Miroslav Haluska and
• Christofer Hierold

Beilstein J. Nanotechnol. 2014, 5, 2179–2191, doi:10.3762/bjnano.5.227

• often generate entirely new possibilities, pushing the limits of the accepted boundaries of material properties within which engineers operate. The identification of carbon nanotubes (CNTs) [1][2][3][4] and later, single-walled nanotubes (SWNTs) [5][6] is one example of this phenomenon. One such

Photodetectors based on carbon nanotubes deposited by using a spray technique on semi-insulating gallium arsenide

• Domenico Melisi,
• Maria Angela Nitti,
• Marco Valentini,
• Antonio Valentini,
• Teresa Ligonzo,
• Giuseppe De Pascali and
• Marianna Ambrico

Beilstein J. Nanotechnol. 2014, 5, 1999–2006, doi:10.3762/bjnano.5.208

• ; spray technique; UV–NIR; Introduction Fast photoconductive detectors (PCD) are widely used for the characterization of sub-nanosecond pulses generated from infrared (IR) to ultraviolet (UV) light, X-ray and gamma-ray photons, as well as charged particles [1][2][3]. Applications of carbon nanotubes

• (CNTs) in this field have shown interesting results, in particular in new technologically advanced nanoelectronic devices [4][5]. Photodetectors based on films of CNTs (both bundle and carpet distribution) on silicon, have been previously analyzed in the visible and IR spectral regions [6][7]. Moreover

Carbon nano-onions (multi-layer fullerenes): chemistry and applications

• Juergen Bartelmess and
• Silvia Giordani

Beilstein J. Nanotechnol. 2014, 5, 1980–1998, doi:10.3762/bjnano.5.207

• ; Review Introduction Since the discovery of the fullerene C60 in 1985 by Curl, Kroto and Smalley [1], carbon nanomaterials have been the focus of interdisciplinary chemical research. In the following years, several other carbon based nanomaterials were discovered, namely carbon nanotubes (CNTs) [2][3][4

Carbon-based smart nanomaterials in biomedicine and neuroengineering

• Antonina M. Monaco and
• Michele Giugliano

Beilstein J. Nanotechnol. 2014, 5, 1849–1863, doi:10.3762/bjnano.5.196

• in brain implants, are within reach thanks to the advancements in nanotechnology. In particular, carbon-based nanostructured materials, such as graphene, carbon nanotubes (CNTs) and nanodiamonds (NDs), have demonstrated to be highly promising materials for designing and fabricating nanoelectrodes and

• allotropes, the most widely known are carbon nanotubes (CNTs) and fullerenes, graphite and graphene (sp2), and diamond (sp3). From these distinct hybridisations, different properties are inherent to these allotropes. Carbon nanotubes (CNTs): CNTs, first reported by Iijima in 1991 [1], are hollow cylinders

Non-covalent and reversible functionalization of carbon nanotubes

• Antonello Di Crescenzo,
• Valeria Ettorre and
• Antonella Fontana

Beilstein J. Nanotechnol. 2014, 5, 1675–1690, doi:10.3762/bjnano.5.178

• Antonello Di Crescenzo Valeria Ettorre Antonella Fontana Dipartimento di Farmacia, Università “G. d’Annunzio”, Via dei Vestini, 66100 Chieti, Italy 10.3762/bjnano.5.178 Abstract Carbon nanotubes (CNTs) have been proposed and actively explored as multipurpose innovative nanoscaffolds for

• possibility to obtain stimuli-responsive precipitation or dispersion of CNTs. Keywords: carbon nanotubes; non-covalent functionalization; π-stacking; reversible dispersion/precipitation; Introduction Carbon nanotubes (CNTs) are hollow cylindrical tubes with nanometer scale diameters and lengths up to a few

Growth and structural discrimination of cortical neurons on randomly oriented and vertically aligned dense carbon nanotube networks

• Christoph Nick,
• Sandeep Yadav,
• Ravi Joshi,
• Christiane Thielemann and
• Jörg J. Schneider

Beilstein J. Nanotechnol. 2014, 5, 1575–1579, doi:10.3762/bjnano.5.169

• . These neuron cells attach preferentially on the CNT sidewalls of the vertically aligned CNT architecture instead than onto the tips of the individual CNT pillars. Keywords: carbon nanotube; chemical vapour deposition; interface; neuron; scaffold; Findings Biochemically functionalised carbon nanotubes

• (CNTs) are attractive for various sensing and electronic applications. These include, but are not limited to, gas sensors [1], mechanical sensors [2], biosensors (e.g., for glucose or DNA) [3][4], and vertical interconnect access (vias) applications based on CNT bundles [5]. CNTs have also sparked

Nano-rings with a handle – Synthesis of substituted cycloparaphenylenes

• Anne-Florence Tran-Van and
• Hermann A. Wegner

Beilstein J. Nanotechnol. 2014, 5, 1320–1333, doi:10.3762/bjnano.5.145

• as fullerene [1], graphene [2] and carbon nanotubes (CNTs) [3]. Research on these materials has been originally conducted by physicists. Also, the preparation methods relied on physical processes [4][5]. In the past decade the field is also more and more a playground for organic chemists as these

Growth and characterization of CNT–TiO₂ heterostructures

• Yucheng Zhang,
• Ivo Utke,
• Johann Michler,
• Gabriele Ilari,
• Marta D. Rossell and
• Rolf Erni

Beilstein J. Nanotechnol. 2014, 5, 946–955, doi:10.3762/bjnano.5.108

• , combining TiO2 nanocrystals and carbon nanotubes (CNTs) offers enhanced photosensitivity and improved photocatalytic efficiency, which is key to achieving sustainable energy and preventing environmental pollution. Hence, it has aroused a tremendous research interest. This report surveys recent research on

• /metal oxide material systems. Keywords: atomic layer deposition (ALD); carbon nanotubes; electron energy loss spectroscopy (EELS); interface; titanium dioxide (TiO2); transmission electron microscopy (TEM); Introduction Since the discovery by Iijima in 1991, carbon nanotubes (CNTs) have always been on