Directed deposition of silicon nanowires using neopentasilane as precursor and gold as catalyst

• Britta Kämpken,
• Verena Wulf,
• Norbert Auner,
• Marcel Winhold,
• Michael Huth,
• Daniel Rhinow and
• Andreas Terfort

Beilstein J. Nanotechnol. 2012, 3, 535–545, doi:10.3762/bjnano.3.62

• deposition of polymer films is microcontact printing [47], which is generally considered advantageous since it is an “additive” method. In this particular case the need for dichloromethane or a similar solvent makes this process unsuitable due to the well-known swelling of the stamp material with these

Micro- and mesoporous solids: From science to application

• Jörg J. Schneider

Beilstein J. Nanotechnol. 2011, 2, 774–775, doi:10.3762/bjnano.2.85

• adsorption sites and dynamics, a theoretical understanding, e.g., employing state of the art theoretical modeling techniques, is certainly necessary. The development of synthetic concepts for the formation of two-dimensional, layered, porous structures, e.g., by swelling and delamination followed by film

Dynamics of capillary infiltration of liquids into a highly aligned multi-walled carbon nanotube film

• Sławomir Boncel,
• Krzysztof Z. Walczak and
• Krzysztof K. K. Koziol

Beilstein J. Nanotechnol. 2011, 2, 311–317, doi:10.3762/bjnano.2.36

• specify the Hildebrand solubility parameter (δ) as crucial towards convenient three-modal classification: dispersion, swelling or precipitation [15][16][17][18]. For evaluation of wettability of HACNT arrays, an approach based on the direct measurement of contact angle between interfaces of nanotube film

Single-pass Kelvin force microscopy and dC/dZ measurements in the intermittent contact: applications to polymer materials

• Sergei Magonov and
• John Alexander

Beilstein J. Nanotechnol. 2011, 2, 15–27, doi:10.3762/bjnano.2.2

• selective swelling of components. Keywords: atomic force microscopy; fluoroalkanes; Kelvin force microscopy; surface potential; Introduction Atomic force microscopy (AFM) applications include high-resolution imaging, probing of local materials properties and compositional mapping of heterogeneous

• compositional mapping of organic materials and polymers. In the intermittent contact operation, proximity of the conducting probe to a sample helps in avoiding screening the sample’s electrical response by a water layer when measurements are performed at high humidity. A selective swelling of individual

• topography and surface potential changes of a thin PMMA film, Figure 7B. The study of swelling of PMMA film by different organic vapors [22] showed that methanol has a strong effect as shown by AFM. Indeed, swelling of PMMA with methanol induced changes not only in topography but also in surface potential

Sensing surface PEGylation with microcantilevers

• Natalija Backmann,
• Natascha Kappeler,
• Thomas Braun,
• François Huber,
• Hans-Peter Lang,
• Christoph Gerber and
• Roderick Y. H. Lim

Beilstein J. Nanotechnol. 2010, 1, 3–13, doi:10.3762/bjnano.1.2

• authors to study the in situ swelling and collapse of poly(methyl methacrylate) brushes, the kinetics of brush formation could not be monitored in real-time. The driving impetus behind this work is to apply microcantilever sensors operated in static mode to study in real-time (1) the kinetic aspects of

• chains into their swelling state. Discussion We have studied the behavior of 20 kDa mPEG–SH “grafted to” Au surfaces using a microcantilever array-based sensor. Consistent with XPS [8], ellipsometry [8][34], QCM [35] and AFM [36] polymer “grafting to” studies, we find that the adsorption profile of mPEG

• -swelling) is described by a reproducible tensile surface stress change with a deflection of ~110–150 nm which equates into a generated stress of ~35–45 mN/m. These results were reproducible with respect to both in situ and external references, as well as surfaces consisting of either bare Au or a Au