Continuous flow synthesis of 6-monoamino-6-monodeoxy-β-cyclodextrin

• János Máté Orosz,
• Dóra Ujj,
• Petr Kasal,
• Gábor Benkovics and
• Erika Bálint

Beilstein J. Org. Chem. 2023, 19, 294–302, doi:10.3762/bjoc.19.25

• efficient reaction used so far for the selective monofunctionalization of CDs [1]. Besides traditional synthetic methods, alternative techniques, such as ultrasound and microwave irradiation [21], as well as mechanosynthesis [22][23] for the functionalizations, such as tosylation or azidation of CDs have

Dissecting Mechanochemistry III

• Lars Borchardt and
• José G. Hernández

Beilstein J. Org. Chem. 2022, 18, 1454–1456, doi:10.3762/bjoc.18.150

• the use of halogenated compounds and include the mechanochemical preparation of isocyanides [10], formylated and acetylated amines [11], and the mechanosynthesis of unsymmetrical salens ligands for preparing metal–salen catalysts [12]. This illustrates the broad applicability of mechanochemical

From amines to (form)amides: a simple and successful mechanochemical approach

• Federico Casti,
• Rita Mocci and
• Andrea Porcheddu

Beilstein J. Org. Chem. 2022, 18, 1210–1216, doi:10.3762/bjoc.18.126

• was successfully converted into the corresponding formamide 19 as was the poorly nucleophilic diphenylamine (Scheme 2, amide 20). Lastly, we aimed to apply the procedure to the acylation of a series of amines. To our delight, we successfully extended the methodology to the mechanosynthesis of amides

Multi-faceted reactivity of N-fluorobenzenesulfonimide (NFSI) under mechanochemical conditions: fluorination, fluorodemethylation, sulfonylation, and amidation reactions

• José G. Hernández,
• Karen J. Ardila-Fierro,
• Dajana Barišić and
• Hervé Geneste

Beilstein J. Org. Chem. 2022, 18, 182–189, doi:10.3762/bjoc.18.20

• ; sulfonylation; Introduction Mechanosynthesis of organic molecules and materials using mechanochemical techniques such as ball milling, extrusion, grinding, etc. [1][2][3] have enabled the development of known and new chemical transformations in a more sustainable fashion [4]. Commonly, mechanochemical

Particle size effect in the mechanically assisted synthesis of β-cyclodextrin mesitylene sulfonate

• Stéphane Menuel,
• Sébastien Saitzek,
• Eric Monflier and
• Frédéric Hapiot

Beilstein J. Org. Chem. 2020, 16, 2598–2606, doi:10.3762/bjoc.16.211

• study, we found that the reactivity depended more upon diffusion phenomena in the crystalline parts of the material than on the increase in the surface area of the CD particles resulting from grinding. Keywords: beta-cyclodextrin; chemoselectivity; grinding; mechanosynthesis; reactivity; Introduction

Mechanochemical Friedel–Crafts acylations

• Mateja Đud,
• Anamarija Briš,
• Iva Jušinski,
• Davor Gracin and
• Davor Margetić

Beilstein J. Org. Chem. 2019, 15, 1313–1320, doi:10.3762/bjoc.15.130

• method in the synthesis of covalent triazine frameworks. Herein, we report related results on solvent-free FC acylation reactions conducted in a ball mill, which is the continuation of our program in organic mechanosynthesis [20][21][22][23][24]. Results and Discussion Mechanochemical FCR of pyrene (1

Synthesis of acylglycerol derivatives by mechanochemistry

• Karen J. Ardila-Fierro,
• Andrij Pich,
• Marc Spehr,
• José G. Hernández and
• Carsten Bolm

Beilstein J. Org. Chem. 2019, 15, 811–817, doi:10.3762/bjoc.15.78

• , mechanosynthesis of lipids by ball milling techniques has remained essentially unexplored. In this work, a multistep synthetic route to access mono- and diacylglycerol derivatives by mechanochemistry has been realized, including the synthesis of diacylglycerol-coumarin conjugates. Keywords: ball mill; coumarin

• targeted the mechanosynthesis of the DAGs by reacting MAG 4a and fatty acids 3 in the ball mill. Such esterifications required the activation of 3 with N,N’-dicyclohexylcarbodiimide (DCC), thereby complementing other recently developed solvent-free carboxylic acid activations towards amidation or

• the mechanosynthesis of DAGs 5 was established, we turned our efforts towards the conjugation of DAG 5a with 7-hydroxycoumarin (9) (Scheme 5). Initially, removal of the TBDMS protecting group of 5a was attempted by milling. However, reacting DAG 5a with a mixture of BF3·CH3CN and silica gel followed

Mechanochemistry of nucleosides, nucleotides and related materials

• Olga Eguaogie,
• Joseph S. Vyle,
• Patrick F. Conlon,
• Manuela A. Gîlea and
• Yipei Liang

Beilstein J. Org. Chem. 2018, 14, 955–970, doi:10.3762/bjoc.14.81

• , consideration of primordial nucleoside and nucleotide mechanochemistry has been much more limited with greater focus upon precursor mechanosynthesis under high-energy plasma conditions [116][117] or extra-terrestrial delivery of concentrated transition metals [118]. In this general context, although Orgel and

Bromide-assisted chemoselective Heck reaction of 3-bromoindazoles under high-speed ball-milling conditions: synthesis of axitinib

• Jingbo Yu,
• Zikun Hong,
• Xinjie Yang,
• Yu Jiang,
• Zhijiang Jiang and
• Weike Su

Beilstein J. Org. Chem. 2018, 14, 786–795, doi:10.3762/bjoc.14.66

• protocol was conducted in a total mechanosynthesis of axitinib in short reaction time and high efficiency. With this system, we hope to expand the pharmaceutical synthetic toolbox in mechanochemistry. Investigation of additives in the Heck reaction: 1a (1.5 mmol), 2a (2.25 mmol), Pd(OAc)2 (5 mol %), PPh3

Exploring mechanochemistry to turn organic bio-relevant molecules into metal-organic frameworks: a short review

• Vânia André,
• Sílvia Quaresma,
• João Luís Ferreira da Silva and
• M. Teresa Duarte

Beilstein J. Org. Chem. 2017, 13, 2416–2427, doi:10.3762/bjoc.13.239

• anticancer drugs have also shown that these have potential to be used in fluorescence imaging. The number of reports on MOFs synthesized by mechanochemistry [8][28][50][99][100][101] has been increasing and some in situ studies on the mechanosynthesis of MOFs and coordination polymers are already being

Mechanochemistry

• José G. Hernández

Beilstein J. Org. Chem. 2017, 13, 2372–2373, doi:10.3762/bjoc.13.234

• Beilstein Journal of Organic Chemistry editorial and production teams, authors and reviewers will definitely help in the consolidation of mechanochemistry worldwide. While exploring this Thematic Series, the reader will find a substantial collection of papers where the advantages of mechanosynthesis are

A mechanochemical approach to access the proline–proline diketopiperazine framework

• Nicolas Pétry,
• Hafid Benakki,
• Eric Clot,
• Pascal Retailleau,
• Farhate Guenoun,
• Fatima Asserar,
• Chakib Sekkat,
• Thomas-Xavier Métro,
• Jean Martinez and
• Frédéric Lamaty

Beilstein J. Org. Chem. 2017, 13, 2169–2178, doi:10.3762/bjoc.13.217

• and Discussion First we studied the preparation of simple Pro–Pro DKP as a model compound. The use of ball milling in peptide synthesis has drawn some attention in the recent years [20][21][22][23][24][25][26][27][28]. We took advantage of our extensive experience in peptide mechanosynthesis [20][23

• alternative approach, we tested the optimal conditions developed previously for peptide mechanosynthesis [25], starting with unactivated amino acids together with a coupling agent. We had indeed reported two successful examples of couplings involving proline amino esters. The initial conditions, using 1-ethyl

• (Table 2). For sake of comparison, we first performed the reaction between meso-10 and benzylamine in toluene (Table 2, entry 1) providing a full conversion into the expected product 11 with a 78:22 cis/trans ratio. Then we studied the mechanosynthesis of these compounds (Table 2, entries 2–8), starting

Mechanochemical synthesis of small organic molecules

• Tapas Kumar Achar,
• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2017, 13, 1907–1931, doi:10.3762/bjoc.13.186

• mechanosynthesis of organometallic complexes are shown. Ćurić and co-workers reported the first mechanochemical activation of a C–H bond of unsymmetrical azobenzene with Pd(OAc)2 [178]. The cyclopalladation process was highly regioselective and the rate of palladation was also faster than traditional solution

• molecules including heterocycles. In addition, the mechanosynthesis of organometallics as well as their selective applications in catalysis are also discussed. The understanding of the mechanism of mechanochemical reactions is still unclear and requires significant advancement in this research area

Mechanochemical synthesis of thioureas, ureas and guanidines

• Vjekoslav Štrukil

Beilstein J. Org. Chem. 2017, 13, 1828–1849, doi:10.3762/bjoc.13.178

• paper, the ball milling approach was then applied for a quantitative click-mechanosynthesis of thiourea-based organocatalysts and anion sensors (Scheme 5) [34]. The demonstrated efficiency of mechanochemical milling synthesis of thioureas was exploited for a quantitative transformation of

• one or two equivalents of phenyl, 4-methoxyphenyl, 4-chlorophenyl or 4-nitrophenyl isothiocyanate. In the 1:1 reaction, solvent-free mechanosynthesis selectively provided stable mono-thioureas 19a–d in ≥95% after 30 minutes (Scheme 6a). When the reactants were milled in a 1:2 ratio for 3 hours (9

• milling for three hours, the addition of phenyl isocyanate (1 equiv) to mono-thioureas 19a–d quantitatively yielded the mixed urea–thioureas 37a–d (Scheme 15b), which could also be prepared by a ‘‘reverse’’ mechanosynthesis starting from the mono-urea 36. An interesting approach, published by Colacino et

Mechanochemical N-alkylation of imides

• Anamarija Briš,
• Mateja Đud and
• Davor Margetić

Beilstein J. Org. Chem. 2017, 13, 1745–1752, doi:10.3762/bjoc.13.169

• considered for LAG in mechanosynthesis. A comparison of results with literature values demonstrates the benefits of mechanosynthesis. For instance, alkylation of theobromine (14) [34] in a microwave reactor in solution gives two side-products, an O-alkylated and a uracil ring-opened product (induced by base

• situ preparation of potassium phthalimide and its alkylation has a potential for the application in mechanochemical Gabriel synthesis of amines. This account illustrates that organic chemists should explore the advantages of mechanosynthesis and apply this method routinely for screening of the best

• . N-Alkylation of imide 1 with 1,3-dibromopropane (2) in a ball mill. Mechanochemical N-alkylation of imide 1. Mechanosynthesis of 7,8-dimethylalloxazine (36) and its N-alkylation. Gabriel synthesis of amines in ball mill. Three-step, two-pot Gabriel synthesis of amines in ball mill. N-Alkylation of