Localized growth of carbon nanotubes via lithographic fabrication of metallic deposits
Beilstein J. Nanotechnol. 2017, 8, 2592–2605. doi:10.3762/bjnano.8.260
Supporting Information
References
| Article Citation | |
| Download RIS (Reference Manager) | Download BIB (BIBTEX) |
| Cited References | |
| Download RIS (Reference Manager) | Download BIB (BIBTEX) |
Presentation Graphic
Picture with graphical abstract, title and authors for social media postings and presentations.
| Format: PNG | Size: 704.5 KB | Download |
Article is part of the issue
Petra Swiderek, Hubertus Marbach and Cornelis W. Hagen
- Full Research Paper
- Published 22 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Schematic of the investigated DG-HJ-JL TFET with Nd = 1·1019 cm−3 and tox = 3 nm.
-
![]()
Figure 2: Drain current as a function of the applied gate voltage for the DG-HJ-JL TFET proposed with differe...
-
![]()
Figure 3: (a) Transfer characteristics of the proposed Si1−xGex/Si/Ge DG-HJ-JL TFET as a function of the Ge c...
-
![]()
Figure 4: (a) Subthreshold swing factor and the ION/IOFF ratio as functions of the Ge mole fraction for the i...
-
![]()
Figure 5: Subthreshold swing factor as a function of the channel length for both the proposed Si1−xGex/Si/Ge ...
-
- Full Research Paper
- Published 21 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Basic designs of (a) M-PLL and (b) S-PLL circuits.
-
![]()
Figure 2: Basic concepts of different PC designs using (a) a LPF, (b) a BPF, (c) a BEF and (d) a HPF. (i) Pri...
-
![]()
Figure 3: Block diagrams of the implemented (a) M-PLL and (b) S-PLL.
-
![]()
Figure 4: Performance of the implemented PD–PC units with (a) a LPF and (b) a HPF. (i) Block diagram of the s...
-
![]()
Figure 5: Performances of the (a) M-PLL with the LPF and (b) S-PLL with the HPF. (i) Block diagrams of the me...
-
![]()
Figure 6: (a) M-PLL and (b) S-PLL waveforms at (i) f0 = 150 kHz and (ii) f0 = 3 MHz.
-
![]()
Figure 7: Performances of the (a) M-PLL with the LPF and (b) S-PLL with the HPF. (i) Block diagrams of the se...
-
![]()
Figure 8: Frequency power spectral density (PSD) distributions of the output signals from the (a, b) M-PLL an...
-
![]()
Figure 9: (a) High-speed FM-AFM images of calcite (10−14) surface obtained in water at 0.5 s/frame (10 × 5 nm2...
-
-
Supp. Info
- Full Research Paper
- Published 20 Jun 2018
-
PDF -
Album-
![]()
Figure 1: FMI-KPFM working principle: Averaged time-integral values of the instantaneous photovoltage are acq...
-
![]()
Figure 2: SPECTY working principle: (a) SPV built-up and decay are modeled using Equation 1 and Equation 2 respectively. (b) A qu...
-
![]()
Figure 3: SPECTY’s algorithm flowchart. When a quasi-steady-state condition is reached, the average value of ...
-
![]()
Figure 4: Comparison between spectroscopy curve obtained through the mathematical fit, measured data points a...
-
![]()
Figure 5: Simulated SPV as a function of the time for different excitation modulation frequencies, the red li...
-
![]()
Figure 6: Simulated SPVAV as a function of the number of excitation cycles for different excitation modulatio...
-
![]()
Figure 7: Simulated surface photovoltage spectroscopy curves of the F5BnPA region for different SPV built-up ...
-
![]()
Figure 8: Time-averaged surface photovoltage measured at different modulating frequencies with intensity-modu...
-
![]()
Figure 9: Data obtained from the implementation of the proposed FMI-KPFM protocol for the simultaneous acquis...
-
![]()
Figure 10: Comparison between curves: Mathematical fit (red and green lines) and simulated SPVAV curve (blue l...
-
- Full Research Paper
- Published 19 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Schematic representation of a configuration that implements a tunable FrFT using (a) a convex, and ...
-
![]()
Figure 2: Schematic representation of a segmented gate electrode with segments with (a) equal and (b) unequal...
-
![]()
Figure 3: Schematic representation of a configuration that implements a discrete Fourier transform by discret...
-
- Full Research Paper
- Published 18 Jun 2018
-
PDF -
Album-
![]()
Figure 1: (a) Top view and (b) side view of monolayer SnSeS. (c) Variation of the lattice constant as a funct...
-
![]()
Figure 2: Atom configuration of possible adsorption sites for hydrogen on the SnSeS monolayer.
-
![]()
Figure 3: (a) A schematic diagram showing strain applied to SnSe2(1−x)S2x monolayer. (b) Evolution of ΔGH for...
-
![]()
Figure 4: Band gaps of the SnSe2(1−x)S2x monolayers as a function of mechanical strain.
-
![]()
Figure 5: Band structures for SnSeS and SnSe0.5S1.5 monolayers with strain of −5%, −3%, 2%, 6% and 10%.
-
Know your full potential: Quantitative Kelvin probe force microscopy on nanoscale electrical devices
- Full Research Paper
- Published 15 Jun 2018
-
PDF -
Album-
![]()
Figure 1: CPD line profiles of two KPFM experiments on the same cross section of a mesoscopic perovskite sola...
-
![]()
Figure 2: Overview of excitation and detection frequencies for KPFM methods used in this work. The lower part...
-
![]()
Figure 3: Sketch of the setup as well as marking scheme of electrodes on the edge. Uext represents the electr...
-
![]()
Figure 4: Comparison of the deviation of the measured potential difference from the applied potential plotted...
-
![]()
Figure 5: Comparison of the deviation of the measured potential difference from the applied potential plotted...
-
![]()
Figure 6: Comparison of the deviation of the measured potential difference from the applied potential plotted...
-
![]()
Figure 7: Comparison of the absolute measured potential plotted against the applied potential for AM (warm co...
-
![]()
Figure 8: Comparison of the absolute measured potential plotted against the applied potential for AM(warm col...
-
-
Supp. Info
- Full Research Paper
- Published 14 Jun 2018
-
PDF -
Album-
![]()
Figure 1: pcAFM measurement of a CdTe/CdS solar cell, during specimen illumination from below through an unde...
-
![]()
Figure 2: (a) Consecutively acquired ISC* (note the log scale) and (b) directly measured VOC* for a single ca...
-
![]()
Figure 3: (a) SEM micrograph of a locally planarized polycrystalline CdTe solar cell. The dotted rectangular ...
-
![]()
Figure 4: Three-dimensional CT-AFM of the short-circuit current (ISC*, dark to blue contrast) merged with the...
-
-
Supp. Info
- Full Research Paper
- Published 14 Jun 2018
-
PDF -
Album-
![]()
Figure 1: (a–d) SEM images of pear-shaped titania nanotubes. (a,b) Cross-sectional morphology (the white circ...
-
![]()
Figure 2: X-ray diffraction patterns of different samples: titania nanotubes before (a) and after (b) heat tr...
-
![]()
Figure 3: SEM images of different samples: (a) Zn-Ag-TNTs; (b) NDM-Zn-Ag-TNTs (the inset picture is part of t...
-
![]()
Figure 4: (a) The full XPS spectra, (b) the fine Ag 3d XPS spectra, (c) the fine O 1s XPS spectra and (d) the...
-
![]()
Figure 5: Optical images of a water droplet on TiO2 nanotube layers before drug release using: (a) bare TNTs,...
-
![]()
Figure 6: The absorbance spectra of TNTs (dark gray line), Ag-TNTs (orange line), Zn-Ag-TNTs (magenta line) a...
-
![]()
Figure 7: (a) The accumulated drug (Zn2+) release with time measured with ICP-AES where the insert is a magni...
-
![]()
Figure 8: The voltage anodization scheme of the in situ voltage up-anodization process to produce pear-like t...
-
- Full Research Paper
- Published 13 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Schematic of different adsorbents: a) activated carbon, b) graphene oxide, GO (for the ease of pres...
-
![]()
Figure 2: SEM image of the carbon samples used in the study: a) CNHs, b) MWNTs, c) high-magnification image o...
-
![]()
Figure 3: a) TEM image of VACNTs obtained after unhinging from the substrate and dispersed in ethanol by ultr...
-
![]()
Figure 4: a) N2 adsorption isotherm at 77 K and b) survey spectra of the six different carbon adsorbents stud...
-
![]()
Figure 5: a) SO2 adsorption isotherms at 25 °C of different adsorbents studied up to the saturation pressure ...
-
-
Supp. Info
- Full Research Paper
- Published 13 Jun 2018
-
PDF -
Album-
![]()
Scheme 1: Schematic illustration of the formation process of the hexagonal magnetic mesoporous nanoplates.
-
![]()
Figure 1: XRD patterns of: (a) pure CoAl LDH; (b) LDH@PDA-2.5 composite; (c–e) the NPLs prepared by carboniza...
-
![]()
Figure 2: SEM images of: (A) pure CoAl LDH; (B) LDH@PDA-2.5 composite; (C) NPLs-2.5-800, the inset shows a hi...
-
![]()
Figure 3: (A–C) TEM images of the hexagonal mesoporous sample NPLs-2.5-800, the inset in (B) shows the corres...
-
![]()
Figure 4: (A) and (B) Nitrogen adsorption–desorption isotherms of the NPLs prepared under different condition...
-
![]()
Figure 5: (A) Magnetization curves of the nanoplate samples prepared by carbonization of LDH@PDA at (a–c) 800...
-
![]()
Figure 6: (A) Raman spectrum and (B–D) XPS spectra of the hexagonal magnetic mesoporous sample NPLs-2.5-800. ...
-
![]()
Figure 7: (A) UV–vis spectra of the solution after adsorption of RhB for 2 h in the absence of any adsorbents...
-
![]()
Figure 8: (A) Relationship between the adsorption ability of the hexagonal NPLs-2.5-800 sample and time at di...
-
![]()
Figure 9: Recyclability of the NPLs adsorbents towards the removal of RhB. The concentration of adsorbents is...
-
-
Supp. Info
- Letter
- Published 12 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Superconducting transition curves for CoOx/Py(5)/Cu(4)/Co2Cr1−xFexAl/Cu(1.5)/Pb(50) multilayers wit...
-
![]()
Figure 2: Dependence of
![[Graphic 4]](/bjnano/content/inline/2190-4286-9-167-i9.svg?max-width=637&scale=1.18182)
on the thickness of layer F2, dF2 in the SSV heterostructures AFM/F1/N1/F2/N2/S. Tri...
-
-
Supp. Info
- Full Research Paper
- Published 12 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Steps of the cryochemical synthesis of nanopowders.
-
![]()
Figure 2: Photographs of the cryogel, which is a precursor of the NiO nanopowder (a) and the cryogranulate, w...
-
![]()
Figure 3: Scheme of CeO2 nanoparticle formation, including the cryotreatment step (liquid N2, −196 °C ) on th...
-
![]()
Scheme 1: Scheme describing the formation of crystalline metal oxides with water, carbon dioxide, and NOx as ...
-
![]()
Figure 4: XRD pattern (DRON-3M, Russia) and TEM image (insert) of the NiO nanopowder.
-
![]()
Figure 5: XRD pattern (DRON-3M, Russia) and TEM image (insert) of the Fe2O3 (hematite) nanopowder.
-
![]()
Figure 6: TEM images of CeO2 nanopowder obtained from the cryosol (a) and CeO2 nanopowder obtained from a fre...
-
![]()
Figure 7: X-ray diffraction pattern for a CeO2 (JCPDS Card No. 43-1002) nanopowder obtained from a cryosol (X...
-
![]()
Figure 8: Collected XPS spectrum of NiO nanopowders synthesized using the cryochemical method.
-
![]()
Figure 9: XPS data for NiO nanopowders synthesized using the cryochemical method: main O 1s peak is associate...
-
![]()
Figure 10: TEM images of sub-micrometer-sized NaNO3–NaF powders containing 3 wt % (а) and 15 wt % (b) of NaF a...
-
![]()
Figure 11: Histograms of the particle size distribution for NaNO3 powders synthesized with the addition of 3 w...
-
- Full Research Paper
- Published 11 Jun 2018
-
PDF -
Album-
![]()
Figure 1: SEM images of gelatin crosslinked with 20 mM genipin during the molding of different surface patter...
-
![]()
Figure 2: The effect of the addition of genipin at 1, 5, 10, and 20 mM to 20 wt % gelatin on the surface morp...
-
![]()
Figure 3: Height changes in gelatin grooves molded to have a width of 500 nm and a height of 500 nm after imm...
-
![]()
Figure 4: Live/dead cell viability assay of Saos-2 cells cultured on the gelatin crosslinked with genipin. Th...
-
![]()
Figure 5: SEM images of attached Saos-2 cells on different gelatin patterns after 1 h incubation at a 45 °C t...
-
![]()
Figure 6: Immunofluorescence images of Saos-2 cells on the gelatin patterns after 1 day of culturing. The cel...
-
![]()
Figure 7: Cell attachment of Saos-2 cells on different gelatin patterned surfaces. Saos-2 cells were incubate...
-
![]()
Figure 8: SEM images of the attached Saos-2 cells on the different gelatin patterns after 7 days of incubatio...
-
![]()
Figure 9: Immunofluorescence images of Saos-2 cells on gelatin patterns after 7 days of culturing. The cells ...
-
![]()
Figure 10: Cell proliferation assay of Saos-2 cells on the different gelatin patterns. Saos-2 cells were incub...
-
![]()
Figure 11: Procedure for the preparation of gelatin patterned surfaces. (a) Addition of a melted gelatin solut...
-
- Full Research Paper
- Published 11 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Outline of the AFIR process. Si(100) wafers with a native layer of SiO2 were coated with Fe2O3. Ant...
-
![]()
Figure 2: (a) SEM image of the antidot array patterned on the film with 27 nm thickness. (b) Profile obtained...
-
![]()
Figure 3: XRD patterns of the as-deposited Fe2O3 film (blue curve) and the Fe3O4 film (red curve) after the t...
-
![]()
Figure 4: Central region of the hysteresis curves for the antidot arrays obtained from a 27 nm thick film. (a...
-
![]()
Figure 5: (a) Coercivity of the initial thin film and of the square (blue squares) and the hexagonal (red tri...
-
![]()
Figure 6: Coercivity (red squares) and normalized remanence (blue dots) as a function of the angle θ at which...
-
- Full Research Paper
- Published 08 Jun 2018
-
PDF -
Album-
![]()
Scheme 1: Schematic illustration of the synthesis of uniform TiO2 particles using a sol–gel reaction in mixed...
-
![]()
Figure 1: (a–e) TEM images of as-synthesized TiO2 with different volume ratios of ethanol to acetonitrile use...
-
![]()
Figure 2: (a–e) TEM images of as-synthesized TiO2 with different concentrations of HPC: (a) 0 (b) 41.67 (c) 1...
-
![]()
Figure 3: (a–e) TEM images of as-synthesized TiO2 with different amounts of TBOT: (a) 1 (b) 2 (c) 4 (d) 6 and...
-
![]()
Figure 4: X-ray diffraction patterns of TiO2 particles calcined at different temperatures (≈350–800 °C).
-
![]()
Figure 5: (a) N2 adsorption/desorption isotherm and (b) pore size distribution of TiO2 particles calcined at ...
-
![]()
Figure 6: (a) UV–vis absorption spectra indicating degradation of rhodamine B (RhB) using the TiO2-500 sample...
-
-
Supp. Info
- Full Research Paper
- Published 08 Jun 2018
-
PDF -
Album-
![]()
Figure 1: An SC–QD–SC Josephson junction realized by a two-level quantum dot in a magnetic field B and electr...
-
![]()
Figure 2: Energy spectrum of a two-level quantum dot coupled with two superconducting leads (SC–QD–SC junctio...
-
![]()
Figure 3: Topological phase space of a 0D topological superconductor realized by a quantum dot coupled with t...
-
![]()
Figure 4: (a) Josephson CPR of the SC–QD–SC junction for different choices of the Zeeman field B in the limit ...
-
- Full Research Paper
- Published 07 Jun 2018
-
PDF -
Album-
![]()
Figure 1: (a) nc-AFM topographic image (2 × 2 μm) of the MAPbBr3 single crystal surface. The dotted rectangle...
-
![]()
Figure 2: Plots of the (a) KPFM surface potential (b) and the tip height change relative to its initial posit...
-
![]()
Figure 3: (a) Scheme illustrating how charge transfer from surface states bends the energy bands of p-type MA...
-
![]()
Figure 4: (a) Photostrictive signal as a function of the optical power at λ = 515 nm. Inset: plot in semi-log...
-
![]()
Figure 5: (a) Scheme of the surface potential time response under frequency modulated illumination. The SPV d...
-
-
Supp. Info
- Full Research Paper
- Published 07 Jun 2018
-
PDF -
Album-
![]()
Figure 1: (a–c) Typical field-emission SEM images with different magnifications of MoS2 NSs grown by double s...
-
![]()
Figure 2: MoS2 NSs grown by double sulfurization of a 50 nm Mo film at 850 °C on SiO2/Si substrates: (a) typi...
-
![]()
Figure 3: MoS2 sample grown by double sulfurization of a 50 nm Mo film at 850 °C on SiO2/Si substrates: (a) P...
-
![]()
Figure 4: MoS2 sample grown by double sulfurization of a 50 nm Mo film at 850 °C on SiO2/Si substrates: (a) H...
-
![]()
Figure 5: Photographs of (a) wet chemically transferred MoS2 sample on the FTO/glass substrate, the FTO film ...
-
![]()
Figure 6: (a) Field-emission current density as a function of the electric field for the transferred MoS2 NSs...
-
-
Supp. Info
- Full Research Paper
- Published 06 Jun 2018
-
PDF -
Album-
![]()
Figure 1: XRD patterns of S, ZnO@NCNT and S/ZnO@NCNT composite.
-
![]()
Figure 2: TGA curve of the S/ZnO@NCNT composite.
-
![]()
Figure 3: (a) HRTEM image; (b) SAED patterns; (c) TEM image; (d–g) EDX mapping images of the ZnO@NCNT composi...
-
![]()
Figure 4: (a) SEM image; (b–f) EDX mapping; (g,h) TEM images of S/ZnO@NCNT composite.
-
![]()
Figure 5: XPS spectra of S/ZnO@NCNT composite.
-
![]()
Figure 6: Discharge/charge voltage profiles of the S/ZnO@NCNT cathode for the initial three cycles at 0.2C.
-
![]()
Figure 7: Cycling performance of the S/ZnO@NCNT cathode at 0.2C.
-
![]()
Figure 8: Long-term cycle life of the S/ZnO@NCNT cathode at 1C.
-
![]()
Figure 9: The performance comparison of S/ZnO@NCNT electrodes with sulfur loadings of 2.5, 3.25, 4.0 and 4.75...
-
![]()
Figure 10: Rate capability of the S/ZnO@NCNT composite cathode.
-
![]()
Figure 11: Discharge/charge voltage profiles of S/ZnO@NCNT composite cathode at various rates.
-
- Full Research Paper
- Published 06 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Schematic setups studied in this paper. a) S–QD–TS geometry: S denotes a conventional s-wave BCS su...
-
![]()
Figure 2: Phase dependence of the subgap spectrum of an S–QD–TS junction in the noninteracting case, U = 0. T...
-
![]()
Figure 3: Phase-dependent ABS spectrum from mean-field theory for S–QD–TS junctions as in Figure 2 but with U > 0 and...
-
![]()
Figure 4: Main panel: Mean-field results for the CPR of S–QD–TS junctions with different Γ/Δ values, where we...
-
![]()
Figure 5: Main panel: Mean-field results for the critical current Ic vs local magnetic field scale Bx in S–QD...
-
![]()
Figure 6: Main panel: Critical current Ic vs Zeeman energy Vx for an S–TS junction using the spinful TS nanow...
-
![]()
Figure 7: CPR for the S–TS junction with
![[Graphic 75]](/bjnano/content/inline/2190-4286-9-158-i137.svg?max-width=637&scale=1.18182)
= 1 in Figure 6, for different bulk Zeeman fields Vx (in meV) near the crit...
-
![]()
Figure 8: Main panel: Critical current Ic vs Zeeman energy Vx for S–QD–TS junctions from mean-field theory us...
-
![]()
Figure 9: Main panel: Mean-field results for Ic vs Bz in S–QD–TS junctions for several values of ΓS = ΓTS = Γ...
-
- Full Research Paper
- Published 05 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Friction force maps for a) an oxidized Si(100) surface scanned with an intact Ar-sputter cleaned SiO...
-
![]()
Figure 2: Graphs exemplifying the absence of contact ageing for slide–hold–slide experiments under UHV condit...
-
![]()
Figure 3: Development of friction for different tip–surface pairs upon activation of the interface. 1 – Contr...
-
![]()
Figure 4: Lateral force loops of the same line from different scan frames. The respective scan number is indi...
-
![]()
Figure 5: Surface topography of the same area before (upper row) and after (lower row) the friction sequences...
-
![]()
Figure 6: Scanning electron microscopy (SEM) images (secondary electrons (SE), back-scattered electrons (BSE)...
-
![]()
Figure 7: TEM images of a cross section through the apex of a Au/Si tip that had been sliding against Au(111)...
-
- Full Research Paper
- Published 05 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Top and side views of the most favorable NO and NO2 adsorption configurations on monolayers of MoS2...
-
![]()
Figure 2: (a–c) TDOS and magnetic charge distribution of (a) the pristine MoS2 monolayer, and MOS2 with (b) a...
-
![]()
Figure 3: Spin orbital-resolved band structures for WS2 with (a) adsorbed NO and (b–e) adsorbed NO2. The red ...
-
![]()
Figure 4: TDOS of (a) the pristine WS2 monolayer, and the WS2 monolayer with (b) NO adsorbed and (c) NO2 adso...
-
-
Supp. Info
- Full Research Paper
- Published 04 Jun 2018
-
PDF -
Album-
![]()
Figure 1: Thermogravimetric analysis–differential scanning calorimetry–mass spectrometry (TGA-DSC-MS) curves ...
-
![]()
Figure 2: X-ray diffraction patterns for samples a) synthesized with HCl, b) samples S1–S5, and c) the crysta...
-
![]()
Figure 3: Pore size distribution for samples REF and S3.
-
![]()
Figure 4: (a) Measured diffuse reflectance plotted as a function of the wavelength – R(λ) and (b) modified Ku...
-
![]()
Figure 5: X-ray photoelectron spectra for selected specimens, reporting the Ti 2p, S 2p, N 1s and Pt 4f peaks....
-
![]()
Figure 6: Cross-sections of thin films of samples a) Urea_15 and b) S4.
-
![]()
Figure 7: Photocatalytic activity of different samples a) synthesized with HCl; dark measurements performed f...
-
![]()
Figure 8: First-order rate constant for plasmocorinth B degradation for selected photocatalysts synthesized i...
-
- Letter
- Published 04 Jun 2018
-
PDF -
Album-
![]()
Figure 1: C-AFM configuration and study of the influence of an applied voltage stress on MnO2 and LMO. (a) Sc...
-
![]()
Figure 2: Combined C-AFM and SIMS analysis of a RF-sputtered LMO film. (a) Schematic of the measurement setup...
-
![]()
Figure 3: Appearance of the ionic hysteresis and influence of Li depletion during preconditioning. (a) The hy...
-
-
Supp. Info
- Full Research Paper
- Published 01 Jun 2018
-
PDF -
Album-
![]()
Scheme 1: Illustration of the possible copolymerization reactions involved in the preparation of the nanocomp...
-
![]()
Figure 1: Mixture of ricinoleic-acid-coated iron-oxide nanoparticles with pure PMMA in toluene, NP-RA-PMMA (l...
-
![]()
Figure 2: DRIFT spectra of the nanoparticle samples NP-RA, NP-MMA and NP-PMMA-3.
-
![]()
Figure 3: Number-weighted hydrodynamic diameter size-distribution function of the NP-RA and NP-PMMA-3 nanopar...
-
![]()
Figure 4: Cross-sectional TEM images of the nanocomposite sample NC-1 at lower (a) and higher (b) magnificati...
-
![]()
Figure 5: (a) Room-temperature magnetization curves of the NP-RA nanoparticles and nanocomposites. (b) Temper...
-
![]()
Figure 6: Heating curves of the NC3 sample measured at different AC field amplitudes at a frequency of (a) 98...
-
-
Supp. Info
