Recent highlights in nanoscale and mesoscale friction

Andrea Vanossi,
Dirk Dietzel,
Andre Schirmeisen,
Ernst Meyer,
Rémy Pawlak,
Thilo Glatzel,
Marcin Kisiel,
Shigeki Kawai and
Nicola Manini

Review
Published 16 Jul 2018

PDF
Album
1. Figure 1: a) Scheme of a MoO₃ nanocrystal on MoS₂. The AFM tip is firmly positioned on top on the nanocrystal...
  
  Jump to Figure 1
2. Figure 2: a) Example of a nanomanipulation during which half of a nanoparticle is scan-imaged, before the tip...
  
  Jump to Figure 2
3. Figure 3: Dependence of nanoparticle shear stress on the contact area. a) Relative shear stress obtained from...
  
  Jump to Figure 3
4. Figure 4: Front perspective: a snapshot of a MD-simulated frictional interface between a colloidal monolayer ...
  
  Jump to Figure 4
5. Figure 5: a) A graphene nanoribbon manipulated along a Au(111) surface. A probing tip lifts the GNR verticall...
  
  Jump to Figure 5
6. Figure 6: Single-molecule tribology. a) Schematic drawing of the experiment: A single porphyrin molecule is a...
  
  Jump to Figure 6
7. Figure 7: Non-contact friction experiments of NbSe₂. At certain voltages and distances, one finds dramaticall...
  
  Jump to Figure 7
8. Figure 8: The “Swiss Nanodragster” (SND), a 4’-(p-tolyl)-2,2’:6’,2”-terpyridine molecule, was moved across an...
  
  Jump to Figure 8
9. Figure 9: Example of a change of conformation potentially triggered at surfaces. a) Trans (1) and cis (2) iso...
  
  Jump to Figure 9

Beilstein J. Nanotechnol. 2018, 9, 1995–2014, doi:10.3762/bjnano.9.190

Full Text

Biomimetic and biodegradable cellulose acetate scaffolds loaded with dexamethasone for bone implants

Aikaterini-Rafailia Tsiapla,
Varvara Karagkiozaki,
Veroniki Bakola,
Foteini Pappa,
Panagiota Gkertsiou,
Eleni Pavlidou and
Stergios Logothetidis

Full Research Paper
Published 13 Jul 2018

PDF
Album
1. Figure 1: (a) Representative SEM micrographs of electrospun CA fibers, (b) AFM topography image of CA scaffol...
  
  Jump to Figure 1
2. Figure 2: In vitro degradation of CA scaffolds as a function of the time.
  
  Jump to Figure 2
3. Figure 3: Representative SEM micrographs of CA scaffolds (a) before degradation on the 1st day, (b) after deg...
  
  Jump to Figure 3
4. Figure 4: (a) Representative SEM micrograph of electrospun CA:dexam fibers, (b) AFM topography image of CA:de...
  
  Jump to Figure 4
5. Figure 5: In vitro degradation of CA scaffolds loaded with dexamethasone as function of the time.
  
  Jump to Figure 5
6. Figure 6: Representative SEM micrographs of CA scaffolds (a) before degradation on the 1st day, (b) after deg...
  
  Jump to Figure 6
7. Figure 7: In vitro release of dexamethasone.
  
  Jump to Figure 7
8. Figure 8: MTT assay of L929 cells with the examined scaffolds after 1, 2 and 5 days.
  
  Jump to Figure 8
9. Figure 9: Optical microscopy images of the cell morphology on the examined scaffolds. The three pictures in t...
  
  Jump to Figure 9
10. Figure 10: SEM micrograph of L929 cells on the examined scaffolds. The three pictures in the top row display t...
  
  Jump to Figure 10
11. Figure 11: Keithley microscopy images of (a) a blank orthopedic pin, (b) a pin coated with CA:dexam fibers and...
  
  Jump to Figure 11

Beilstein J. Nanotechnol. 2018, 9, 1986–1994, doi:10.3762/bjnano.9.189

Full Text

Self-assembled quasi-hexagonal arrays of gold nanoparticles with small gaps for surface-enhanced Raman spectroscopy

Emre Gürdal,
Simon Dickreuter,
Fatima Noureddine,
Pascal Bieschke,
Dieter P. Kern and
Monika Fleischer

Full Research Paper
Published 12 Jul 2018

PDF
Album
1. Figure 1: Schematic illustration of the preparation of variable-size gold nanoparticle arrays on top of a sil...
  
  Jump to Figure 1
2. Figure 2: SEM images of the gold precursor particles after oxygen plasma treatment (a, b) and gold nanopartic...
  
  Jump to Figure 2
3. Figure 3: Dependence of the mean equivalent diameter of the gold particles on the ED duration. Three separate...
  
  Jump to Figure 3
4. Figure 4: Mean dark-field spectra of the different samples. For each sample 25 spectra at different positions...
  
  Jump to Figure 4
5. Figure 5: Background-corrected mean Raman spectra of the four different samples. For each sample three Raman ...
  
  Jump to Figure 5
6. Figure 6: Filling factor-corrected Raman intensities of the different samples, for the two peaks at 1085 cm⁻¹...
  
  Jump to Figure 6
7. Figure 7: Filling factor-corrected Raman spectrum of sample A compared to a Raman spectrum on smooth gold fil...
  
  Jump to Figure 7

Beilstein J. Nanotechnol. 2018, 9, 1977–1985, doi:10.3762/bjnano.9.188

Full Text

Electromigrated electrical optical antennas for transducing electrons and photons at the nanoscale

Arindam Dasgupta,
Mickaël Buret,
Nicolas Cazier,
Marie-Maxime Mennemanteuil,
Reinaldo Chacon,
Kamal Hammani,
Jean-Claude Weeber,
Juan Arocas,
Laurent Markey,
Gérard Colas des Francs,
Alexander Uskov,
Igor Smetanin and
Alexandre Bouhelier

Full Research Paper
Published 11 Jul 2018

PDF
Album
1. Figure 1: (a) False-color scanning electron micrograph of a typical constriction separating two tapered elect...
  
  Jump to Figure 1
2. Figure 2: (a) Temporal extract of the electromigration sequence featuring the effect of partial annealing, Jo...
  
  Jump to Figure 2
3. Figure 3: (a) Current density J_T plotted versus applied bias V_dc. The black circles are experimental data poi...
  
  Jump to Figure 3
4. Figure 4: (a) Fowler–Nordheim representation of the J_T(V_dc) data shown in Figure 3a. The transition voltages and are...
  
  Jump to Figure 4
5. Figure 5: (a) Transmission optical image showing a series of electromigrated constrictions. (b) Optical image...
  
  Jump to Figure 5
6. Figure 6: (a, c, e) Colorized scanning electron micrographs of the electron-fed optical antennas integrated i...
  
  Jump to Figure 6
7. Figure 7: (a) Colorized image of the optical tunneling gap antenna (orange) integrated inside a slot waveguid...
  
  Jump to Figure 7

Beilstein J. Nanotechnol. 2018, 9, 1964–1976, doi:10.3762/bjnano.9.187

Full Text

Defect formation in multiwalled carbon nanotubes under low-energy He and Ne ion irradiation

Santhana Eswara,
Jean-Nicolas Audinot,
Brahime El Adib,
Maël Guennou,
Tom Wirtz and
Patrick Philipp

Full Research Paper
Published 09 Jul 2018

PDF
Album
1. Figure 1: Raman spectra of multiwalled carbon nanotubes after irradiation with different fluences of a) 25 ke...
  
  Jump to Figure 1
2. Figure 2: a) Ratio of intensities of D to G band as a function of fluence for 25 keV He and Ne irradiation, a...
  
  Jump to Figure 2
3. Figure 3: TEM images and Raman spectra after: (A–C) 25 keV He⁺ irradiation with a fluence of 10¹⁸ ions/cm² (D...
  
  Jump to Figure 3
4. Figure 4: Nuclear and electronic energy loss as a function of sample thickness for a) He⁺ and b) Ne⁺ irradiat...
  
  Jump to Figure 4
5. Figure 5: Sputter yield a) at the top, and b) at the bottom of the sample as a function of fluence for Ne irr...
  
  Jump to Figure 5
6. Figure 6: Backscatter yield as a function of gold thickness for He and Ne irradiation of a 30 nm carbon film ...
  
  Jump to Figure 6
7. Figure 7: Displacements into the carbon layer normalised to incident ion as a function of gold thickness for ...
  
  Jump to Figure 7
8. Figure 8: Schematic illustration of the sample configuration and the sequence of techniques used in this inve...
  
  Jump to Figure 8
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1951–1963, doi:10.3762/bjnano.9.186

Full Text

Synthesis of a MnO₂/Fe₃O₄/diatomite nanocomposite as an efficient heterogeneous Fenton-like catalyst for methylene blue degradation

Zishun Li,
Xuekun Tang,
Kun Liu,
Jing Huang,
Yueyang Xu,
Qian Peng and
Minlin Ao

Full Research Paper
Published 06 Jul 2018

PDF
Album
1. Figure 1: XRD patterns of the purified diatomite and the prepared diatomite-supported composites.
  
  Jump to Figure 1
2. Figure 2: FTIR spectra of the purified diatomite and prepared diatomite-supported composites.
  
  Jump to Figure 2
3. Figure 3: The SEM images of diatomite (a), Fe₃O₄/diatomite (b, d), MnO₂/Fe₃O₄/diatomite (c and e), EDX spectr...
  
  Jump to Figure 3
4. Figure 4: TEM images of (a) Fe₃O₄/diatomite, (b, c) MnO₂/Fe₃O₄/diatomite and (d) HRTEM image of MnO₂/Fe₃O₄/di...
  
  Jump to Figure 4
5. Figure 5: Magnetic hysteresis loops of Fe₃O₄/diatomite and MnO₂/Fe₃O₄/diatomite. The inset image illustrates ...
  
  Jump to Figure 5
6. Figure 6: XPS spectra of as-synthesized MnO₂/Fe₃O₄/diatomite: (a) full survey spectrum, high-resolution scans...
  
  Jump to Figure 6
7. Figure 7: (a) N₂ adsorption–desorption isotherms and (b) the corresponding pore-size distribution curves of d...
  
  Jump to Figure 7
8. Figure 8: MB removal of different catalytic systems (a) without and (b) with (b) PMS. (Reaction conditions: c...
  
  Jump to Figure 8
9. Figure 9: MB removal using MnO₂/Fe₃O₄/diatomite at (a) different pH values, (b) different temperatures and (c...
  
  Jump to Figure 9
10. Figure 10: Recyclability of the MnO₂/Fe₃O₄/diatomite catalyst for the degradation of MB.
  
  Jump to Figure 10
11. Figure 11: Schematic diagram of the synergistic effect between MnO₂ and Fe₃O₄.
  
  Jump to Figure 11
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1940–1950, doi:10.3762/bjnano.9.185

Full Text

A differential Hall effect measurement method with sub-nanometre resolution for active dopant concentration profiling in ultrathin doped Si₁₋_xGe_x and Si layers

Richard Daubriac,
Emmanuel Scheid,
Hiba Rizk,
Richard Monflier,
Sylvain Joblot,
Rémi Beneyton,
Pablo Acosta Alba,
Sébastien Kerdilès and
Filadelfo Cristiano

Full Research Paper
Published 05 Jul 2018

PDF
Album
1. Figure 1: Removed SiGe thickness measured by different methods (TEM, XRD and ellipsometry) as a function of t...
  
  Jump to Figure 1
2. Figure 2: Removed SiGe thickness (measured by ellipsometry) as a function of etching time for two different G...
  
  Jump to Figure 2
3. Figure 3: (a) Sheet resistance R_S, (b) Hall dose N_H, and (c) Hall mobility µ_H as functions of the etching tim...
  
  Jump to Figure 3
4. Figure 4: Depth profiles of (a) active dopant concentration and (b) carrier mobility extracted from the DHE m...
  
  Jump to Figure 4
5. Figure 5: Sheet resistance as a function of the laser energy density for 6 nm SiGeOI (x_Ge = 0.25) layer impla...
  
  Jump to Figure 5
6. Figure 6: Hall effect measurements (raw data: (a) R_S, (b) N_H and (c) µ_H) of the SiGeOI sample (x_Ge = 0.25) im...
  
  Jump to Figure 6
7. Figure 7: Depth profiles of (a) active dopant concentration and (b) carrier mobility extracted from DHE measu...
  
  Jump to Figure 7
8. Figure 8: Concentration depth profiles of (a) arsenic and (b) oxygen measured by SIMS in 11 nm thick SOI wafe...
  
  Jump to Figure 8
9. Figure 9: Hall effect measurements (raw data: (a) R_S, (b) N_H and (c) µ_H) of the SOI samples implanted with ar...
  
  Jump to Figure 9
10. Figure 10: Active dopant concentration depth profiles as extracted by DHE measurements from 11 nm thick SOI wa...
  
  Jump to Figure 10
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1926–1939, doi:10.3762/bjnano.9.184

Full Text

Nonlinear effect of carrier drift on the performance of an n-type ZnO nanowire nanogenerator by coupling piezoelectric effect and semiconduction

Yuxing Liang,
Shuaiqi Fan,
Xuedong Chen and
Yuantai Hu

Full Research Paper
Published 04 Jul 2018

PDF
Album
1. Figure 1: A circular ZNW cantilever exposed to a force P at the free end.
  
  Jump to Figure 1
2. Figure 2: Nonlinearity as a result of carrier drift for n₀ = 1.0·10²³m⁻³ as a function of the end force P. a)...
  
  Jump to Figure 2
3. Figure 3: Carrier distribution in the ZNW cross section for P = 50, 60, 70 and 80 nN.
  
  Jump to Figure 3
4. Figure 4: Distribution of electric potential in the ZNW cross section for P = 50, 60, 70 and 80 nN.
  
  Jump to Figure 4
5. Figure 5: Effect of initial carrier concentration n₀ on the electric field E₂ along the x₂-axis.
  
  Jump to Figure 5
6. Figure 6: Output voltage V_out between the two endpoints of the cross section of a bent ZNW as a function of t...
  
  Jump to Figure 6
7. Figure 7: (a) Boundary electric potential and (b) boundary electric displacement D_r at Ω for different end f...
  
  Jump to Figure 7
8. Figure 8: W as a function of the electrode configuration for different end forces.
  
  Jump to Figure 8
9. Figure 9: W as a function of the electrode configuration for different initial carrier concentrations.
  
  Jump to Figure 9

Beilstein J. Nanotechnol. 2018, 9, 1917–1925, doi:10.3762/bjnano.9.183

Full Text

The inhibition effect of water on the purification of natural gas with nanoporous graphene membranes

Krzysztof Nieszporek,
Tomasz Pańczyk and
Jolanta Nieszporek

Full Research Paper
Published 02 Jul 2018

PDF
Album
1. Figure 1: The simulation box.
  
  Jump to Figure 1
2. Figure 2: Atomic charges for nanopores HH (top), NHH (middle) and NN (bottom). The charges of the remaining c...
  
  Jump to Figure 2
3. Figure 3: The influence of water on the number of methane and nitrogen molecules passing through an HH nanopo...
  
  Jump to Figure 3
4. Figure 4: The average number of water molecules as a function of the distance of O_w atoms from the center of ...
  
  Jump to Figure 4
5. Figure 5: The influence of water on the number of methane and nitrogen molecules passing through an NHH nanop...
  
  Jump to Figure 5
6. Figure 6: The number of water molecules plotted as a function of the distance of O_w atoms from the center of ...
  
  Jump to Figure 6
7. Figure 7: The influence of water on the number of methane and nitrogen molecules passing through NN nanopore.
  
  Jump to Figure 7
8. Figure 8: The number of water molecules plotted as a function of the distance of O_w atoms from the center of ...
  
  Jump to Figure 8
9. Figure 9: Radial distribution function of O_w–O_w pairs and the cumulative number of water molecules for the NN...
  
  Jump to Figure 9
10. Figure 10: The extracted frame from the simulation trajectory of the separation of CH₄ + N₂ + 200 H₂O with an ...
  
  Jump to Figure 10
11. Figure 11: The temperature influence on the number of molecules passing across the pore as a function of the s...
  
  Jump to Figure 11
12. Figure 12: The temperature effect on the number of water molecules as a function of the distance of O_w atoms f...
  
  Jump to Figure 12
13. Figure 13: The influence of the number of water molecules present in the gaseous mixture on the number of CH₄ ...
  
  Jump to Figure 13
14. Figure 14: Hydrogen-bond correlation functions for hydrogen bridges between water and nitrogen atoms located i...
  
  Jump to Figure 14
15. Figure 15: Semi-logarithmic plot of the reactive flux correlation functions k(t) for hydrogen bridges between ...
  
  Jump to Figure 15
16. Figure 16: Temperature influence on (a) the hydrogen bond distance and (b) the angle distribution in water for...
  
  Jump to Figure 16
17. Figure 17: Evolution in time of the average angle between four vectors designated by four carbon atoms in ever...
  
  Jump to Figure 17
18. Figure 18: Time evolution of the second kind of deviation. Data were determined from the simulation trajectory...
  
  Jump to Figure 18

Beilstein J. Nanotechnol. 2018, 9, 1906–1916, doi:10.3762/bjnano.9.182

Full Text

Synthesis of carbon nanowalls from a single-source metal-organic precursor

André Giese,
Sebastian Schipporeit,
Volker Buck and
Nicolas Wöhrl

Full Research Paper
Published 29 Jun 2018

PDF
Album
1. Figure 1: Three-stage model of CNW growth (adapted from Kondo and co-workers) [18].
  
  Jump to Figure 1
2. Figure 2: Schematic diagram of ICP-PECVD plasma source.
  
  Jump to Figure 2
3. Figure 3: SEM images. Sampe 1 deposited at 350 °C and 0 V bias voltage: nanorods; sample 2 deposited at 350 °...
  
  Jump to Figure 3
4. Figure 4: SEM images. Sample 3 deposited at 425 °C and −30 V bias voltage: straight CNWs; sample 2 deposited ...
  
  Jump to Figure 4
5. Figure 5: Growth zones of CNW growth: nanorods (low energies), thorny structures and straight CNWs (medium en...
  
  Jump to Figure 5
6. Figure 6: Growth zones on different substrate materials as a function of substrate temperature and bias volta...
  
  Jump to Figure 6
7. Figure 7: Typical Raman spectra and the I_D/I_G ratios for a) nanorods, b) thorny CNWs, c) straight CNWs and d)...
  
  Jump to Figure 7
8. Figure 8: I_D/I_G ratio as a function of the mean wall length of the straight and the curled CNWs on a) stainle...
  
  Jump to Figure 8
9. Figure 9: Heights of CNWs as a function of process parameters and substrate material.
  
  Jump to Figure 9
10. Figure 10: a) SEM image of the curled CNWs and corresponding b) carbon and c) aluminium mappings, as measured ...
  
  Jump to Figure 10
11. Figure 11: EDX spectrum of CNWs on stainless steel (Fe, Cr). Besides carbon and aluminium, oxygen can be found...
  
  Jump to Figure 11

Beilstein J. Nanotechnol. 2018, 9, 1895–1905, doi:10.3762/bjnano.9.181

Full Text

Synthesis of rare-earth metal and rare-earth metal-fluoride nanoparticles in ionic liquids and propylene carbonate

Marvin Siebels,
Lukas Mai,
Laura Schmolke,
Kai Schütte,
Juri Barthel,
Junpei Yue,
Jörg Thomas,
Bernd M. Smarsly,
Anjana Devi,
Roland A. Fischer and
Christoph Janiak

Full Research Paper
Published 28 Jun 2018

PDF
Album
1. Scheme 1: Synthesis of REF₃-NPs or RE-NPs from the rare-earth metal amidinates RE(amd)₃ and Eu(dpm)₃ by micro...
  
  Jump to Scheme 1
2. Figure 1: TEM images and particle size histogram (from 128 particles) of 1.0 wt % ErF₃-NPs in [BMIm][BF₄] fro...
  
  Jump to Figure 1
3. Figure 2: PXRD and SAED (ErF₃ reference peaks in red from COD 4030804, orthorhombic structure with space grou...
  
  Jump to Figure 2
4. Figure 3: EDX of 1.0 wt % ErF₃-NPs in [BMIm][BF₄] from Er(amd)₃.
  
  Jump to Figure 3
5. Figure 4: Overview and HR-XPS of 1.0 wt % ErF₃-NPs in [BMIm][BF₄] from Er(amd)₃. The red and green bars are a...
  
  Jump to Figure 4
6. Figure 5: Cyclic voltammetry of a half-cell with ErF₃ as working electrode and lithium foil as counter electr...
  
  Jump to Figure 5
7. Figure 6: TEM images and particle size histogram of 1.0 wt % Gd-NPs in [BMIm][NTf₂] from Gd(amd)₃.
  
  Jump to Figure 6
8. Figure 7: SAED (Gd reference peaks in red from COD 1522526, cubic crystal system with space group Im−3m) and ...
  
  Jump to Figure 7
9. Figure 8: Overview and HR-XPS of 1.0 wt % Gd-NPs in [BMIm][NTf₂] from Gd(amd)₃. The red and green bars are a ...
  
  Jump to Figure 8
10. Figure 9: TEM images, particle-size histogram and EDX of 1.0 wt % Gd-NPs in PC from Gd(amd)₃.
  
  Jump to Figure 9
11. Figure 10: HR-XPS of 1.0 wt % Gd-NPs in PC from Gd(amd)₃. The red and green bars are a guide to the eye on the...
  
  Jump to Figure 10
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1881–1894, doi:10.3762/bjnano.9.180

Full Text

Synthesis of hafnium nanoparticles and hafnium nanoparticle films by gas condensation and energetic deposition

Irini Michelakaki,
Nikos Boukos,
Dimitrios A. Dragatogiannis,
Spyros Stathopoulos,
Costas A. Charitidis and
Dimitris Tsoukalas

Full Research Paper
Published 27 Jun 2018

PDF
Album
1. Figure 1: TEM image of the as deposited Hf nanoparticles with mean sizes of (diameter × height) a) 16 nm × 15...
  
  Jump to Figure 1
2. Figure 2: HRTEM image of a Hf nanoparticle showing a distinct core–shell structure: In the core area lattice ...
  
  Jump to Figure 2
3. Figure 3: X-ray pattern of hafnium NPs on Si substrate synthesized for different aggregation-zone lengths D =...
  
  Jump to Figure 3
4. Figure 4: a) Bright-field TEM image of Hf nanoparticles; b) 3D geometric model of the truncated hexagonal bip...
  
  Jump to Figure 4
5. Figure 5: TEM showing the morphology of Hf NPs deposited at different substrate voltages V_s: a) V_s = 0 kV; th...
  
  Jump to Figure 5
6. Figure 6: SEM images of Hf NPs film formed with energetic deposition and substrate bias: a) V_s = 2 kV; b,c) V_s...
  
  Jump to Figure 6
7. Figure 7: HRTEM characterization of Hf NTFs formed with energetic Hf NPs deposition and substrate bias: a) V_s...
  
  Jump to Figure 7
8. Figure 8: X-ray pattern of Hf NTFs deposited at different substrate voltages V_s = 0, 2 and 4.5 kV.
  
  Jump to Figure 8
9. Figure 9: Dependence of hardness (H) and elastic modulus (E) of Hf NTFs as functions of the substrate voltage ...
  
  Jump to Figure 9
10. Figure 10: a) HRTEM image showing partial coalescence of Hf NPs deposited at a substrate bias of V_s = 2 kV; b)...
  
  Jump to Figure 10
11. Figure 11: Scanning electron microscopy image of 3D patterns composed of Hf NPs deposited at a substrate volta...
  
  Jump to Figure 11
12. Figure 12: Schematic of the inert-gas condensation system used for nanoparticle growth.
  
  Jump to Figure 12
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1868–1880, doi:10.3762/bjnano.9.179

Full Text

Electrical characterization of single nanometer-wide Si fins in dense arrays

Steven Folkersma,
Janusz Bogdanowicz,
Andreas Schulze,
Paola Favia,
Dirch H. Petersen,
Ole Hansen,
Henrik H. Henrichsen,
Peter F. Nielsen,
Lior Shiv and
Wilfried Vandervorst

Full Research Paper
Published 25 Jun 2018

PDF
Album
1. Figure 1: Top-view schematic of the four μ4pp electrodes landed on (a) a single fin and (b) two fins. The ele...
  
  Jump to Figure 1
2. Figure 2: (a) Measured fin resistance R_fin as a function of fin width W_fin on isolated (triangle) and dense (...
  
  Jump to Figure 2
3. Figure 3: (a) TEM image of four ca. 20 nm wide Si fins where the measured R_fin is indicated on top of each fi...
  
  Jump to Figure 3

Beilstein J. Nanotechnol. 2018, 9, 1863–1867, doi:10.3762/bjnano.9.178

Full Text

The role of the Ge mole fraction in improving the performance of a nanoscale junctionless tunneling FET: concept and scaling capability

Hichem Ferhati,
Fayçal Djeffal and
Toufik Bentrcia

Full Research Paper
Published 22 Jun 2018

PDF
Album
1. Figure 1: Schematic of the investigated DG-HJ-JL TFET with N_d = 1·10¹⁹ cm⁻³ and t_ox = 3 nm.
  
  Jump to Figure 1
2. Figure 2: Drain current as a function of the applied gate voltage for the DG-HJ-JL TFET proposed with differe...
  
  Jump to Figure 2
3. Figure 3: (a) Transfer characteristics of the proposed Si₁₋_xGe_x/Si/Ge DG-HJ-JL TFET as a function of the Ge c...
  
  Jump to Figure 3
4. Figure 4: (a) Subthreshold swing factor and the I_ON/I_OFF ratio as functions of the Ge mole fraction for the i...
  
  Jump to Figure 4
5. Figure 5: Subthreshold swing factor as a function of the channel length for both the proposed Si₁₋_xGe_x/Si/Ge ...
  
  Jump to Figure 5

Beilstein J. Nanotechnol. 2018, 9, 1856–1862, doi:10.3762/bjnano.9.177

Full Text

Quantitative comparison of wideband low-latency phase-locked loop circuit designs for high-speed frequency modulation atomic force microscopy

Kazuki Miyata and
Takeshi Fukuma

Full Research Paper
Published 21 Jun 2018

PDF
Album
1. Figure 1: Basic designs of (a) M-PLL and (b) S-PLL circuits.
  
  Jump to Figure 1
2. Figure 2: Basic concepts of different PC designs using (a) a LPF, (b) a BPF, (c) a BEF and (d) a HPF. (i) Pri...
  
  Jump to Figure 2
3. Figure 3: Block diagrams of the implemented (a) M-PLL and (b) S-PLL.
  
  Jump to Figure 3
4. Figure 4: Performance of the implemented PD–PC units with (a) a LPF and (b) a HPF. (i) Block diagram of the s...
  
  Jump to Figure 4
5. Figure 5: Performances of the (a) M-PLL with the LPF and (b) S-PLL with the HPF. (i) Block diagrams of the me...
  
  Jump to Figure 5
6. Figure 6: (a) M-PLL and (b) S-PLL waveforms at (i) f₀ = 150 kHz and (ii) f₀ = 3 MHz.
  
  Jump to Figure 6
7. Figure 7: Performances of the (a) M-PLL with the LPF and (b) S-PLL with the HPF. (i) Block diagrams of the se...
  
  Jump to Figure 7
8. Figure 8: Frequency power spectral density (PSD) distributions of the output signals from the (a, b) M-PLL an...
  
  Jump to Figure 8
9. Figure 9: (a) High-speed FM-AFM images of calcite (10−14) surface obtained in water at 0.5 s/frame (10 × 5 nm²...
  
  Jump to Figure 9
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1844–1855, doi:10.3762/bjnano.9.176

Full Text

Numerical analysis of single-point spectroscopy curves used in photo-carrier dynamics measurements by Kelvin probe force microscopy under frequency-modulated excitation

Pablo A. Fernández Garrillo,
Benjamin Grévin and
Łukasz Borowik

Full Research Paper
Published 20 Jun 2018

PDF
Album
1. Figure 1: FMI-KPFM working principle: Averaged time-integral values of the instantaneous photovoltage are acq...
  
  Jump to Figure 1
2. Figure 2: SPECTY working principle: (a) SPV built-up and decay are modeled using Equation 1 and Equation 2 respectively. (b) A qu...
  
  Jump to Figure 2
3. Figure 3: SPECTY’s algorithm flowchart. When a quasi-steady-state condition is reached, the average value of ...
  
  Jump to Figure 3
4. Figure 4: Comparison between spectroscopy curve obtained through the mathematical fit, measured data points a...
  
  Jump to Figure 4
5. Figure 5: Simulated SPV as a function of the time for different excitation modulation frequencies, the red li...
  
  Jump to Figure 5
6. Figure 6: Simulated SPV_AV as a function of the number of excitation cycles for different excitation modulatio...
  
  Jump to Figure 6
7. Figure 7: Simulated surface photovoltage spectroscopy curves of the F₅BnPA region for different SPV built-up ...
  
  Jump to Figure 7
8. Figure 8: Time-averaged surface photovoltage measured at different modulating frequencies with intensity-modu...
  
  Jump to Figure 8
9. Figure 9: Data obtained from the implementation of the proposed FMI-KPFM protocol for the simultaneous acquis...
  
  Jump to Figure 9
10. Figure 10: Comparison between curves: Mathematical fit (red and green lines) and simulated SPV_AV curve (blue l...
  
  Jump to Figure 10

Beilstein J. Nanotechnol. 2018, 9, 1834–1843, doi:10.3762/bjnano.9.175

Full Text

Tunable fractional Fourier transform implementation of electronic wave functions in atomically thin materials

Daniela Dragoman

Full Research Paper
Published 19 Jun 2018

PDF
Album
1. Figure 1: Schematic representation of a configuration that implements a tunable FrFT using (a) a convex, and ...
  
  Jump to Figure 1
2. Figure 2: Schematic representation of a segmented gate electrode with segments with (a) equal and (b) unequal...
  
  Jump to Figure 2
3. Figure 3: Schematic representation of a configuration that implements a discrete Fourier transform by discret...
  
  Jump to Figure 3

Beilstein J. Nanotechnol. 2018, 9, 1828–1833, doi:10.3762/bjnano.9.174

Full Text

Improving the catalytic activity for hydrogen evolution of monolayered SnSe₂₍₁₋_x₎S₂_x by mechanical strain

Sha Dong and
Zhiguo Wang

Full Research Paper
Published 18 Jun 2018

PDF
Album
1. Figure 1: (a) Top view and (b) side view of monolayer SnSeS. (c) Variation of the lattice constant as a funct...
  
  Jump to Figure 1
2. Figure 2: Atom configuration of possible adsorption sites for hydrogen on the SnSeS monolayer.
  
  Jump to Figure 2
3. Figure 3: (a) A schematic diagram showing strain applied to SnSe₂₍₁₋_x₎S₂_x monolayer. (b) Evolution of ΔG_H for...
  
  Jump to Figure 3
4. Figure 4: Band gaps of the SnSe₂₍₁₋_x₎S₂_x monolayers as a function of mechanical strain.
  
  Jump to Figure 4
5. Figure 5: Band structures for SnSeS and SnSe_0.5S_1.5 monolayers with strain of −5%, −3%, 2%, 6% and 10%.
  
  Jump to Figure 5

Beilstein J. Nanotechnol. 2018, 9, 1820–1827, doi:10.3762/bjnano.9.173

Full Text

Know your full potential: Quantitative Kelvin probe force microscopy on nanoscale electrical devices

Amelie Axt,
Ilka M. Hermes,
Victor W. Bergmann,
Niklas Tausendpfund and
Stefan A. L. Weber

Full Research Paper
Published 15 Jun 2018

PDF
Album
1. Figure 1: CPD line profiles of two KPFM experiments on the same cross section of a mesoscopic perovskite sola...
  
  Jump to Figure 1
2. Figure 2: Overview of excitation and detection frequencies for KPFM methods used in this work. The lower part...
  
  Jump to Figure 2
3. Figure 3: Sketch of the setup as well as marking scheme of electrodes on the edge. U_ext represents the electr...
  
  Jump to Figure 3
4. Figure 4: Comparison of the deviation of the measured potential difference from the applied potential plotted...
  
  Jump to Figure 4
5. Figure 5: Comparison of the deviation of the measured potential difference from the applied potential plotted...
  
  Jump to Figure 5
6. Figure 6: Comparison of the deviation of the measured potential difference from the applied potential plotted...
  
  Jump to Figure 6
7. Figure 7: Comparison of the absolute measured potential plotted against the applied potential for AM (warm co...
  
  Jump to Figure 7
8. Figure 8: Comparison of the absolute measured potential plotted against the applied potential for AM(warm col...
  
  Jump to Figure 8
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1809–1819, doi:10.3762/bjnano.9.172

Full Text

Direct AFM-based nanoscale mapping and tomography of open-circuit voltages for photovoltaics

Katherine Atamanuk,
Justin Luria and
Bryan D. Huey

Full Research Paper
Published 14 Jun 2018

PDF
Album
1. Figure 1: pcAFM measurement of a CdTe/CdS solar cell, during specimen illumination from below through an unde...
  
  Jump to Figure 1
2. Figure 2: (a) Consecutively acquired I_SC* (note the log scale) and (b) directly measured V_OC* for a single ca...
  
  Jump to Figure 2
3. Figure 3: (a) SEM micrograph of a locally planarized polycrystalline CdTe solar cell. The dotted rectangular ...
  
  Jump to Figure 3
4. Figure 4: Three-dimensional CT-AFM of the short-circuit current (I_SC*, dark to blue contrast) merged with the...
  
  Jump to Figure 4
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1802–1808, doi:10.3762/bjnano.9.171

Full Text

A visible-light-controlled platform for prolonged drug release based on Ag-doped TiO₂ nanotubes with a hydrophobic layer

Caihong Liang,
Jiang Wen and
Xiaoming Liao

Full Research Paper
Published 14 Jun 2018

PDF
Album
1. Figure 1: (a–d) SEM images of pear-shaped titania nanotubes. (a,b) Cross-sectional morphology (the white circ...
  
  Jump to Figure 1
2. Figure 2: X-ray diffraction patterns of different samples: titania nanotubes before (a) and after (b) heat tr...
  
  Jump to Figure 2
3. Figure 3: SEM images of different samples: (a) Zn-Ag-TNTs; (b) NDM-Zn-Ag-TNTs (the inset picture is part of t...
  
  Jump to Figure 3
4. Figure 4: (a) The full XPS spectra, (b) the fine Ag 3d XPS spectra, (c) the fine O 1s XPS spectra and (d) the...
  
  Jump to Figure 4
5. Figure 5: Optical images of a water droplet on TiO₂ nanotube layers before drug release using: (a) bare TNTs,...
  
  Jump to Figure 5
6. Figure 6: The absorbance spectra of TNTs (dark gray line), Ag-TNTs (orange line), Zn-Ag-TNTs (magenta line) a...
  
  Jump to Figure 6
7. Figure 7: (a) The accumulated drug (Zn²⁺) release with time measured with ICP-AES where the insert is a magni...
  
  Jump to Figure 7
8. Figure 8: The voltage anodization scheme of the in situ voltage up-anodization process to produce pear-like t...
  
  Jump to Figure 8

Beilstein J. Nanotechnol. 2018, 9, 1793–1801, doi:10.3762/bjnano.9.170

Full Text

SO₂ gas adsorption on carbon nanomaterials: a comparative study

Deepu J. Babu,
Divya Puthusseri,
Frank G. Kühl,
Sherif Okeil,
Michael Bruns,
Manfred Hampe and
Jörg J. Schneider

Full Research Paper
Published 13 Jun 2018

PDF
Album
1. Figure 1: Schematic of different adsorbents: a) activated carbon, b) graphene oxide, GO (for the ease of pres...
  
  Jump to Figure 1
2. Figure 2: SEM image of the carbon samples used in the study: a) CNHs, b) MWNTs, c) high-magnification image o...
  
  Jump to Figure 2
3. Figure 3: a) TEM image of VACNTs obtained after unhinging from the substrate and dispersed in ethanol by ultr...
  
  Jump to Figure 3
4. Figure 4: a) N₂ adsorption isotherm at 77 K and b) survey spectra of the six different carbon adsorbents stud...
  
  Jump to Figure 4
5. Figure 5: a) SO₂ adsorption isotherms at 25 °C of different adsorbents studied up to the saturation pressure ...
  
  Jump to Figure 5
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1782–1792, doi:10.3762/bjnano.9.169

Full Text

Uniform cobalt nanoparticles embedded in hexagonal mesoporous nanoplates as a magnetically separable, recyclable adsorbent

Can Zhao,
Yuexiao Song,
Tianyu Xiang,
Wenxiu Qu,
Shuo Lou,
Xiaohong Yin and
Feng Xin

Full Research Paper
Published 13 Jun 2018

PDF
Album
1. Scheme 1: Schematic illustration of the formation process of the hexagonal magnetic mesoporous nanoplates.
  
  Jump to Scheme 1
2. Figure 1: XRD patterns of: (a) pure CoAl LDH; (b) LDH@PDA-2.5 composite; (c–e) the NPLs prepared by carboniza...
  
  Jump to Figure 1
3. Figure 2: SEM images of: (A) pure CoAl LDH; (B) LDH@PDA-2.5 composite; (C) NPLs-2.5-800, the inset shows a hi...
  
  Jump to Figure 2
4. Figure 3: (A–C) TEM images of the hexagonal mesoporous sample NPLs-2.5-800, the inset in (B) shows the corres...
  
  Jump to Figure 3
5. Figure 4: (A) and (B) Nitrogen adsorption–desorption isotherms of the NPLs prepared under different condition...
  
  Jump to Figure 4
6. Figure 5: (A) Magnetization curves of the nanoplate samples prepared by carbonization of LDH@PDA at (a–c) 800...
  
  Jump to Figure 5
7. Figure 6: (A) Raman spectrum and (B–D) XPS spectra of the hexagonal magnetic mesoporous sample NPLs-2.5-800. ...
  
  Jump to Figure 6
8. Figure 7: (A) UV–vis spectra of the solution after adsorption of RhB for 2 h in the absence of any adsorbents...
  
  Jump to Figure 7
9. Figure 8: (A) Relationship between the adsorption ability of the hexagonal NPLs-2.5-800 sample and time at di...
  
  Jump to Figure 8
10. Figure 9: Recyclability of the NPLs adsorbents towards the removal of RhB. The concentration of adsorbents is...
  
  Jump to Figure 9
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1770–1781, doi:10.3762/bjnano.9.168

Full Text

Increasing the performance of a superconducting spin valve using a Heusler alloy

Andrey A. Kamashev,
Aidar A. Validov,
Joachim Schumann,
Vladislav Kataev,
Bernd Büchner,
Yakov V. Fominov and
Ilgiz A. Garifullin

Letter
Published 12 Jun 2018

PDF
Album
1. Figure 1: Superconducting transition curves for CoO_x/Py(5)/Cu(4)/Co₂Cr₁₋_xFe_xAl/Cu(1.5)/Pb(50) multilayers wit...
  
  Jump to Figure 1
2. Figure 2: Dependence of on the thickness of layer F2, d_F2 in the SSV heterostructures AFM/F1/N1/F2/N2/S. Tri...
  
  Jump to Figure 2
Supp. Info

Beilstein J. Nanotechnol. 2018, 9, 1764–1769, doi:10.3762/bjnano.9.167

Full Text

Cryochemical synthesis of ultrasmall, highly crystalline, nanostructured metal oxides and salts

Elena A. Trusova and
Nikolai S. Trutnev

Full Research Paper
Published 12 Jun 2018

PDF
Album
1. Figure 1: Steps of the cryochemical synthesis of nanopowders.
  
  Jump to Figure 1
2. Figure 2: Photographs of the cryogel, which is a precursor of the NiO nanopowder (a) and the cryogranulate, w...
  
  Jump to Figure 2
3. Figure 3: Scheme of CeO₂ nanoparticle formation, including the cryotreatment step (liquid N₂, −196 °C ) on th...
  
  Jump to Figure 3
4. Scheme 1: Scheme describing the formation of crystalline metal oxides with water, carbon dioxide, and NO_x as ...
  
  Jump to Scheme 1
5. Figure 4: XRD pattern (DRON-3M, Russia) and TEM image (insert) of the NiO nanopowder.
  
  Jump to Figure 4
6. Figure 5: XRD pattern (DRON-3M, Russia) and TEM image (insert) of the Fe₂O₃ (hematite) nanopowder.
  
  Jump to Figure 5
7. Figure 6: TEM images of CeO₂ nanopowder obtained from the cryosol (a) and CeO₂ nanopowder obtained from a fre...
  
  Jump to Figure 6
8. Figure 7: X-ray diffraction pattern for a CeO₂ (JCPDS Card No. 43-1002) nanopowder obtained from a cryosol (X...
  
  Jump to Figure 7
9. Figure 8: Collected XPS spectrum of NiO nanopowders synthesized using the cryochemical method.
  
  Jump to Figure 8
10. Figure 9: XPS data for NiO nanopowders synthesized using the cryochemical method: main O 1s peak is associate...
  
  Jump to Figure 9
11. Figure 10: TEM images of sub-micrometer-sized NaNO₃–NaF powders containing 3 wt % (а) and 15 wt % (b) of NaF a...
  
  Jump to Figure 10
12. Figure 11: Histograms of the particle size distribution for NaNO₃ powders synthesized with the addition of 3 w...
  
  Jump to Figure 11