2 article(s) from Lewis, Brett B
- Full Research Paper
- Published 07 Apr 2017
-
PDF -
Album-
![]()
Figure 1: Schematic illustrating the experimental system which includes a laser delivery system, precursor an...
-
![]()
Figure 2: Segment angle plotted as a function of dwell time per pixel grown under six different conditions: 1...
-
![]()
Figure 3: BF STEM images of a) an as-deposited EBID segment with a 10.4 ms dwell time per pixel and in situ L...
-
![]()
Figure 4: SEM images (scale bar length is 100 nm) of suspended nanowires grown across a ≈500 nm gap using a d...
-
![]()
Figure 5: COMSOL™ simulation results showing the preferential heating at of the EBID deposit. a) is a plot of...
-
-
Supp. Info
- Full Research Paper
- Published 08 Apr 2015
-
PDF -
Album-
![]()
Figure 1: In situ EDS spectra of deposits purified using an electron beam with an energy of 5 keV, a current ...
-
![]()
Figure 2: a) Cross-section SEM images of 400 nm thick PtCx deposits that were purified for 1, 2, 4, 6, 8, and...
-
![]()
Figure 3: Normalized carbon peak area plotted as a function of a) curing time for the indicated pixel resolut...
-
![]()
Figure 4: a) Normalized carbon peak area plotted as a function of dose for the beam energies shown. b) Monte ...
-
![]()
Figure 5: a) Images of wire deposits with different initial thicknesses (wires 1–4) purified at 1 min interva...
-
![]()
Figure 6: a) EDS measurements of the samples deposited and purified on the TEM membranes. TEM images of an b)...
-
![]()
Figure 7: Selected area electron diffraction (SAED) patterns for O2 E-beam uncured (left) and cured (right) d...
-
![]()
Figure 8: Bar graph comparing the simulated and experimental purification rates for varying beam parameters.
-
