2 article(s) from Rack, Philip D
Schematic illustrating the experimental system which includes a laser delivery system, precursor an...
Jump to Figure 1
Segment angle plotted as a function of dwell time per pixel grown under six different conditions: 1...
Jump to Figure 2
BF STEM images of a) an as-deposited EBID segment with a 10.4 ms dwell time per pixel and in situ L...
Jump to Figure 3
SEM images (scale bar length is 100 nm) of suspended nanowires grown across a ≈500 nm gap using a d...
Jump to Figure 4
COMSOL™ simulation results showing the preferential heating at of the EBID deposit. a) is a plot of...
Jump to Figure 5
Beilstein J. Nanotechnol. 2017, 8, 801–812, doi:10.3762/bjnano.8.83
In situ EDS spectra of deposits purified using an electron beam with an energy of 5 keV, a current ...
a) Cross-section SEM images of 400 nm thick PtCx deposits that were purified for 1, 2, 4, 6, 8, and...
Normalized carbon peak area plotted as a function of a) curing time for the indicated pixel resolut...
a) Normalized carbon peak area plotted as a function of dose for the beam energies shown. b) Monte ...
a) Images of wire deposits with different initial thicknesses (wires 1–4) purified at 1 min interva...
a) EDS measurements of the samples deposited and purified on the TEM membranes. TEM images of an b)...
Jump to Figure 6
Selected area electron diffraction (SAED) patterns for O2 E-beam uncured (left) and cured (right) d...
Jump to Figure 7
Bar graph comparing the simulated and experimental purification rates for varying beam parameters.
Jump to Figure 8
Beilstein J. Nanotechnol. 2015, 6, 907–918, doi:10.3762/bjnano.6.94
Subscribe to our Latest Articles RSS Feed.
Register and get informed about new articles.
Follow the Beilstein-Institut