Evaluating metal-organic precursors for focused ion beam-induced deposition through solid-layer decomposition analysis

• Benedykt R. Jany,
• Katarzyna Madajska,
• Aleksandra Butrymowicz-Kubiak,
• Franciszek Krok and
• Iwona B. Szymańska

Beilstein J. Nanotechnol. 2025, 16, 1942–1951, doi:10.3762/bjnano.16.135

• irradiation and what kind of morphology is developed for the finally formed metal-rich structures. (3) Analyzing BSE images of the evolving surface morphology at successive stages of FIB irradiation in order to determine “the sputtering point”, that is, the threshold ion fluence at which the sputtering

• subsequently exposed to gallium FIB irradiation. The optimal ion fluence for each precursor was determined by monitoring changes in the BSE signal intensity associated with the evolving surface morphology. The resulting metal-rich surface structures were analyzed using SEM EDX processed by machine learning

Electrical, photocatalytic, and sensory properties of graphene oxide and polyimide implanted with low- and medium-energy silver ions

• Josef Novák,
• Eva Štěpanovská,
• Petr Malinský,
• Vlastimil Mazánek,
• Jan Luxa,
• Ulrich Kentsch and
• Zdeněk Sofer

Beilstein J. Nanotechnol. 2025, 16, 1794–1811, doi:10.3762/bjnano.16.123

• of GO and PI. Elemental and structural changes induced by implantation were analyzed using Rutherford backscattering spectroscopy, elastic recoil detection analysis, Raman spectroscopy, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Surface morphology was assessed via

• amorphization of the material and probably to the carbonization of the polyimide. Surface morphology studied by AFM Changes in the surface morphology of PI implanted with 20 keV and 1.5 MeV Ag ions at different fluences were examined by atomic force microscopy (AFM). The basic parameters arithmetic average

• height (Ra) and mean roughness (RMS) are listed in Table 4 [25]. Figure 9 illustrates the alteration in the surface morphology of graphene oxide (GO) resulting from the implantation of 20 keV Ag ions (Figure 9) depending on the applied ion fluence. The minimal roughness was achieved when the GO sample

Laser processing in liquids: insights into nanocolloid generation and thin film integration for energy, photonic, and sensing applications

• Akshana Parameswaran Sreekala,
• Pooja Raveendran Nair,
• Jithin Kundalam Kadavath,
• Bindu Krishnan,
• David Avellaneda Avellaneda,
• M. R. Anantharaman and
• Sadasivan Shaji

Beilstein J. Nanotechnol. 2025, 16, 1428–1498, doi:10.3762/bjnano.16.104

• morphological features [118][119]. A 3D AFM image of ZnO NPs drop-cast on a glass substrate is shown in Figure 11b, revealing the surface morphology. Their photodetection and photovoltaic properties are discussed in the later sections of this review. Research articles provide limited information on the

Synthesis and antibacterial properties of nanosilver-modified cellulose triacetate membranes for seawater desalination

• Lei Wang,
• Shizhe Li,
• Kexin Xu,
• Wenjun Li,
• Ying Li and
• Gang Liu

Beilstein J. Nanotechnol. 2025, 16, 1380–1391, doi:10.3762/bjnano.16.100

• the CTA membrane, thereby corroborating the conclusions drawn from the SEM images. To investigate the morphological changes of Ag@PCTA during the desalination process, SEM was used to examine the surface morphology of the coating and to identify any signs of degradation or loss. The surface images

Wavelength-dependent correlation of LIPSS periodicity and laser penetration depth in stainless steel

• Nitin Chaudhary,
• Chavan Akash Naik,
• Shilpa Mangalassery,
• Jai Prakash Gautam and
• Sri Ram Gopal Naraharisetty

Beilstein J. Nanotechnol. 2025, 16, 1302–1315, doi:10.3762/bjnano.16.95

• conducted to examine the surface morphology of the samples and precisely measure the depth to which the laser heat affected or penetrated the zone. Imaging was performed using an FEI NOVA NANO SEM 450 scanning electron microscope. External etching was executed using a DC power supply machine, applying a

• LIPSS with varying laser power The spatial periodicity of LIPSS varies under different experimental conditions. This section specifically examines how surface morphology and the periodicity of LSFL and HSFL change with varying power values while maintaining a fixed wavelength of 800 nm. Figure 2

• pure metals [70][71][72]. Figure 7 displays cross-sectional surface morphology images for samples irradiated with 600, 1200, 2000, 2200, and 2400 nm laser wavelength. As depicted in Figure 8 and Table 2, the diagram reveals a contradiction to the established principle of skin depth, as the depth of

Enhancing the photoelectrochemical performance of BiOI-derived BiVO₄ films by controlled-intensity current electrodeposition

• Huu Phuc Dang,
• Khanh Quang Nguyen,
• Nguyen Thi Mai Tho and
• Tran Le

Beilstein J. Nanotechnol. 2025, 16, 1289–1301, doi:10.3762/bjnano.16.94

• optimize the crystallinity, surface morphology, and electronic properties of the films. Subsequently, an electrochemical deposition method was developed to facilitate the uniform distribution of V2O5 among Bi–O–I flakes to homogeneously enhance the conversion reaction. The XRD pattern confirms the

• microscopy (FESEM) images highlighted the evolution of the surface morphology under different fabrication conditions. The transition from two-dimensional plate-like BiOI crystals to three-dimensional BiVO4 particles was accompanied by the formation of submicrometer-scale voids, indicative of grain growth and

Functional bio-packaging enhanced with nanocellulose from rice straw and cinnamon essential oil Pickering emulsion for fruit preservation

• Tuyen B. Ly,
• Duong D. T. Nguyen,
• Hieu D. Nguyen,
• Yen T. H. Nguyen,
• Bup T. A. Bui,
• Kien A. Le and
• Phung K. Le

Beilstein J. Nanotechnol. 2025, 16, 1234–1245, doi:10.3762/bjnano.16.91

• stability, making PE-CEO-infused films promising candidates for biopackaging applications requiring controlled moisture permeability. The surface morphology of the biopackaging materials was examined using scanning electron microscopy (SEM) (Figure 3). As shown in our previous research, nanocellulose in

• the sample (g·m−1·h−1·Pa−1), L is the sample thickness (m), ΔP is the vapor pressure difference (Pa), S is the saturation vapor pressure at the test temperature (Pa), R1 is the relative humidity inside the dish, and R2 is the relative humidity at the cup. The surface morphology of the biopackaging

Influence of ion beam current on the structural, optical, and mechanical properties of TiO₂ coatings: ion beam-assisted vs conventional electron beam evaporation

• Agata Obstarczyk and
• Urszula Wawrzaszek

Beilstein J. Nanotechnol. 2025, 16, 1097–1112, doi:10.3762/bjnano.16.81

• analysis of surface morphology and cross sections revealed that the TiO2 films prepared by IBAD had smaller, rounded grains and were denser compared to those deposited by EBE. Optical properties showed high transparency of 77–83% in the visible wavelength range for all as-prepared thin films. However

• coatings, there are no significant differences between the surface morphology for films deposited without and with ion gun. SEM images showed smooth surfaces composed of very small grains with columnar-like character. Post-process annealing caused a significant change of the surface and cross-section

• morphology. After thermal modification, the surface morphology of the prepared coatings without additional ion bombardment showed very large grains with an average size of approximately 100 nm, which formed agglomerates with visible voids between them (Figure 3 A). Additionally, the cross-section image

Single-layer graphene oxide film grown on α-Al₂O₃(0001) for use as an adsorbent

• Shiro Entani,
• Mitsunori Honda,
• Masaru Takizawa and
• Makoto Kohda

Beilstein J. Nanotechnol. 2025, 16, 1082–1087, doi:10.3762/bjnano.16.79

• was removed from the SLGO surface by water rinsing and then the Cs-adsorbed SLGO specimen was introduced in the XPS chamber kept at ultra-high vacuum. The surface morphology of SLGO was examined using atomic force microscopy (AFM, SII SAP300). AFM images of (a) SLG/α-Al2O3(0001) and (b) SLGO/α-Al2O3

Multifunctional properties of bio-poly(butylene succinate) reinforced with multiwalled carbon nanotubes

• Volodymyr Krasinskyi,
• Krzysztof Bajer,
• Ludmila Dulebova,
• Nickolas Polychronopoulos,
• Oksana Krasinska and
• Daniel Kaczor

Beilstein J. Nanotechnol. 2025, 16, 1014–1024, doi:10.3762/bjnano.16.76

• . The surface morphology of the original substances and the PBS/CNTs nanocomposites was studied using SEM (Figure 1). In Figure 1a, the typical surface structure of PBS is visible. CNTs appear as agglomerates ranging from 500 nm to 200 μm, composed of woven nanotubes with an outer diameter of 14 to 28

Shape, membrane morphology, and morphodynamic response of metabolically active human mitochondria revealed by scanning ion conductance microscopy

• Eric Lieberwirth,
• Anja Schaeper,
• Regina Lange,
• Ingo Barke,
• Simone Baltrusch and
• Sylvia Speller

Beilstein J. Nanotechnol. 2025, 16, 951–967, doi:10.3762/bjnano.16.73

• study demonstrated the use of a nanopipette for extraction of small mitochondrial subpopulations from fibroblasts for next-generation genome sequencing [33]. However, metabolically active, isolated mitochondria and their surface morphology at nanometer resolution have not been reported using SICM. In

Ar⁺ implantation-induced tailoring of RF-sputtered ZnO films: structural, morphological, and optical properties

• Manu Bura,
• Divya Gupta,
• Arun Kumar and
• Sanjeev Aggarwal

Beilstein J. Nanotechnol. 2025, 16, 872–886, doi:10.3762/bjnano.16.66

• modes on the surface morphological and optical characteristics (Urbach energy and optical bandgap). In fact, in the existing literature, there are barely any studies that have addressed the impact of the evolution of A1 (LO) modes on surface morphology and optical properties in low-energy regimes

• using a WITec alpha300 RA Raman spectrometer under excitation with a 532 nm solid-state diode laser operated at 10 mW. The topography of the films is examined using atomic force microscopy (AFM) with a Bruker Multimode 8 instrument. The surface morphology of pristine and implanted films is further

• surface morphology of pristine and 30 keV Ar+ ion-implanted ZnO films is studied using AFM. Figure 7 represents 2D and 3D AFM images at the scale 2 µm × 2 µm of the pristine film (Figure 7a) and films implanted at four different fluences, viz. 1 × 1015 (Figure 7b), 5 × 1015 (Figure 7c), 1 × 1016 (Figure

Morphology and properties of pyrite nanoparticles obtained by pulsed laser ablation in liquid and thin films for photodetection

• Akshana Parameswaran Sreekala,
• Bindu Krishnan,
• Rene Fabian Cienfuegos Pelaes,
• David Avellaneda Avellaneda,
• Josué Amílcar Aguilar-Martínez and
• Sadasivan Shaji

Beilstein J. Nanotechnol. 2025, 16, 785–805, doi:10.3762/bjnano.16.60

• straightforward, flexible, and affordable methods to obtain thin films using laser-processed nanocolloids. Spin coating is combined with EPD for film deposition with the intention of obtaining seeded film growth with improved thickness and for surface morphology modifications. The importance of using

• nanocolloid in this work. The optical properties of nanocolloids and their thin films were evaluated using UV–visible (UV–vis) spectroscopy. The nanoparticle characterization and surface morphology were studied using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and the

• retained their original morphology as observed in the colloidal state, with aggregates of spherical particles. Further control over film uniformity, packing density, or morphology can be achieved by modifying the deposition parameters in EPD, including voltage and deposition time [56]. The surface

High-temperature epitaxial growth of tantalum nitride thin films on MgO: structural evolution and potential for SQUID applications

• Michelle Cedillo Rosillo,
• Oscar Contreras López,
• Jesús Antonio Díaz,
• Agustín Conde Gallardo and
• Harvi A. Castillo Cuero

Beilstein J. Nanotechnol. 2025, 16, 690–699, doi:10.3762/bjnano.16.53

• , atomic force microscopy, and transmission electron microscopy analyses revealed that the TaN films exhibit excellent crystallinity and smooth surface morphology, when deposited at optimal temperatures of 750 and 850 °C. The films exhibit superconducting transition temperatures (Tc) ranging from 5.0 to

• . Atomic force microscopy (AFM, XE-70 Park Systems) in contact mode was used to study the surface morphology of the films. The synthesis protocol used in this study was modified from the work reported by Quintanar-Zamora et al. [15] by varying the substrate temperature and the nitrogen pressure. Results

• potential of thin TaN films for integration into advanced superconducting applications. AFM analysis confirmed the smooth surface morphology of the films, suggesting that the deposition parameters significantly influence both the structural and superconducting properties of the TaN thin films, but not the

Aprepitant-loaded solid lipid nanoparticles: a novel approach to enhance oral bioavailability

• Mazhar Hussain,
• Muhammad Farooq,
• Muhammad Asad Saeed,
• Muhammad Ijaz,
• Sherjeel Adnan,
• Zeeshan Masood,
• Muhammad Waqas,
• Wafa Ishaq and
• Nabeela Ameer

Beilstein J. Nanotechnol. 2025, 16, 652–663, doi:10.3762/bjnano.16.50

• were 121.1 nm, −18.8 mV, and 96.75%, respectively. SEM analysis confirmed the smooth surface morphology of SLN formulations. FTIR, DSC, SEM, and XRD suggested that there was no physical interaction between APT and the polymers. Moreover, β-CD-based formulation showed better in vitro release behavior

N₂⁺-implantation-induced tailoring of structural, morphological, optical, and electrical characteristics of sputtered molybdenum thin films

• Usha Rani,
• Kafi Devi,
• Divya Gupta and
• Sanjeev Aggarwal

Beilstein J. Nanotechnol. 2025, 16, 495–509, doi:10.3762/bjnano.16.38

• implanted with 1 × 1017 N2+·cm−2 at 30 keV using a current density of 4 µA·cm−2. Surface morphology and structural, optical, and electrical properties of the as-deposited and implanted Mo thin films have been systematically investigated. The crystallinity of Mo thin films is enhanced with increasing

• material characteristics. Ion implantation is one of the most attractive techniques because it introduces considerable changes in the surface morphology and composition of the films [13][14]. The uses of implanted Mo thin films cover a broad range of applications including microelectronics and

• range of applications [23][24][25][26][27][28]. Kim et al. [23] examined the impact of a 3 × 1017 N2+·cm−2 ion fluence on the structural characteristics, surface morphology, and thermal stability of Mo thin films. The internal stress of these films transitioned from strongly compressive to weakly

Performance optimization of a microwave-coupled plasma-based ultralow-energy ECR ion source for silicon nanostructuring

• Joy Mukherjee,
• Safiul Alam Mollick,
• Tanmoy Basu and
• Tapobrata Som

Beilstein J. Nanotechnol. 2025, 16, 484–494, doi:10.3762/bjnano.16.37

• software. Figure 5 presents the surface morphology of the Si surface after Ar-ion bombardment at different incidence angles. The arrow on the right-hand side indicates the direction of the ion beam concerning the surface normal. The irradiation of the silicon surface at an angle of 55° leads to no changes

• in surface morphology (Figure 5a). However, at an ion incidence angle of 58°, changes in surface morphology begin to appear, although no prominent ripple structure is observed (Figure 5b). In contrast, the bombardment of the Si surface for 1 h at an angle of 60° leads to the formation of a well

• no reaction between the inert Ar ions and the Si atoms, ensuring the absence of a chemical aspect of pattern formation. However, the native silicon oxide layer is partially sputtered. This is also a key factor in generating surface instabilities. The surface morphology largely varies due to different

Impact of adsorbate–substrate interaction on nanostructured thin films growth during low-pressure condensation

• Alina V. Dvornichenko,
• Vasyl O. Kharchenko and
• Dmitrii O. Kharchenko

Beilstein J. Nanotechnol. 2025, 16, 473–483, doi:10.3762/bjnano.16.36

• increase in its coverage and the formation of a smaller number of adsorbate islands of larger size. At elevated adsorption rates, an increase in adsorbate–substrate interactions results in the transformation of the surface morphology and the formation of percolating adsorbate structures. Deposition onto

• multicomponent substrates leads to the formation of a stationary surface morphology with an elevated number of adsorbate islands of smaller size, compared to one-component substrates. This study provides a deep insight into the peculiarities of nanostructured thin films’ growth in low-pressure systems with

• = εs/ε and ρ = r0/ℓ. In previous studies it was shown that in the framework of the reaction–diffusion modeling, the surface morphology can be controlled by different factors. For instance, an increase in the adsorption rate leads to an increase in the linear size of separated nanodots on the surface

ReactorAFM/STM – dynamic reactions on surfaces at elevated temperature and atmospheric pressure

• Tycho Roorda,
• Hamed Achour,
• Matthijs A. van Spronsen,
• Marta E. Cañas-Ventura,
• Sander B. Roobol,
• Willem Onderwaater,
• Mirthe Bergman,
• Peter van der Tuijn,
• Gertjan van Baarle,
• Johan W. Bakker,
• Joost W. M. Frenken and
• Irene M. N. Groot

Beilstein J. Nanotechnol. 2025, 16, 397–406, doi:10.3762/bjnano.16.30

• separate quadrupole mass spectrometer (QMS) at the exhaust of the reactor chamber is equipped with its own turbo pump allowing for a direct correlation between surface morphology and catalytic properties by measuring the gases that leave the reactor. AFM/STM reactor The main objective in the design of the

Engineered PEG–PCL nanoparticles enable sensitive and selective detection of sodium dodecyl sulfate: a qualitative and quantitative analysis

• Soni Prajapati and
• Ranjana Singh

Beilstein J. Nanotechnol. 2025, 16, 385–396, doi:10.3762/bjnano.16.29

• . Polystyrene latex absorption coefficient and refractive index were used to measure synthesized nanoparticles, prefilled in the software with values of 0.01 and 1.59, respectively. All measurements were performed at 25 °C. The surface morphology of PEG–PCL nanoparticles was analyzed using scanning electron

Tailoring of physical properties of RF-sputtered ZnTe films: role of substrate temperature

• Kafi Devi,
• Usha Rani,
• Arun Kumar,
• Divya Gupta and
• Sanjeev Aggarwal

Beilstein J. Nanotechnol. 2025, 16, 333–348, doi:10.3762/bjnano.16.25

• the optical bandgap of the films can be tuned from 1.47 ± 0.02 eV to 3.11 ± 0.14 eV. The surface morphology of the films studied using atomic force microscopy reveals that there is uniform grain growth on the surface. Various morphological parameters such as roughness, particle size, particle density

• resistivity of the films depends on the structure, grain boundary defects, and surface morphology of the films. These properties can be altered by varying the deposition method as well as the deposition parameters. In literature, there are several reports of zinc telluride films deposited using various

• obtained micrographs were then analysed regarding various statistical parameters such as roughness, skewness, kurtosis, and power spectral density using the NanoScope Analysis software. Surface morphology and composition of the films were studied by field-emission scanning electron microscopy attached with

Enhancing mechanical properties of chitosan/PVA electrospun nanofibers: a comprehensive review

• Nur Areisman Mohd Salleh,
• Amalina Muhammad Afifi,
• Fathiah Mohamed Zuki and
• Hanna Sofia SalehHudin

Beilstein J. Nanotechnol. 2025, 16, 286–307, doi:10.3762/bjnano.16.22

• electron microscopy (SEM) and field-emission scanning electron microscopy (FESEM) are more commonly used to analyze the fiber diameter, distribution, and overall surface morphology [144]. Microscopic images obtained from these techniques help to identify defects such as beading or non-uniformity in fibers

Characterization of ZnO nanoparticles synthesized using probiotic Lactiplantibacillus plantarum GP258

• Prashantkumar Siddappa Chakra,
• Aishwarya Banakar,
• Shriram Narayan Puranik,
• Vishwas Kaveeshwar,
• C. R. Ravikumar and
• Devaraja Gayathri

Beilstein J. Nanotechnol. 2025, 16, 78–89, doi:10.3762/bjnano.16.8

• ZnO NPs confirms the XRD results, that is, the hexagonal wurtzite structure (Figure 3). SEM and EDX analysis SEM was used to analyze the surface morphology of a modified nanocomposite film, and the image displays a consistent coverage of a web-like structure. Close-up views revealed a crumpled and

Ultrablack color in velvet ant cuticle

• Vinicius Marques Lopez,
• Wencke Krings,
• Juliana Reis Machado,
• Stanislav Gorb and
• Rhainer Guillermo-Ferreira

Beilstein J. Nanotechnol. 2024, 15, 1554–1565, doi:10.3762/bjnano.15.122

• spectroscopy, we conducted a comprehensive analysis of the cuticle to elucidate its unique optical properties. SEM imaging provided a detailed surface morphology, while TEM provided insights into the internal structure. CLSM showed that the cuticle exhibits no autofluorescence. Our findings reveal a highly

The role of a tantalum interlayer in enhancing the properties of Fe₃O₄ thin films

• Hai Dang Ngo,
• Vo Doan Thanh Truong,
• Van Qui Le,
• Hoai Phuong Pham and
• Thi Kim Hang Pham

Beilstein J. Nanotechnol. 2024, 15, 1253–1259, doi:10.3762/bjnano.15.101

• indicates the potential to facilitate the development of novel magnetic and spintronic architectures. Results and Discussion AFM and line-cut method were used to examine the surface morphology and grain sizes of the Fe3O4 films that were formed on SiO2/Si(100), MgO(100), and MgO/Ta/SiO2/Si(100) multilayer

• annealed at a temperature of 723 K for a duration of 2 h under a base pressure of 2.3 × 10−8 Torr. The Fe3O4 films were analyzed regarding their surface morphology, magnetic properties, and structural properties using atomic force microscopy (EasyScan2, Nanosurf), vibration sample magnetometry (Quantum