In situ magnesiothermic reduction synthesis of a Ge@C composite for high-performance lithium-ion batterie anodes

• Ha Tran Huu,
• Ngoc Phi Nguyen,
• Vuong Hoang Ngo,
• Huy Hoang Luc,
• Minh Kha Le,
• Minh Thu Nguyen,
• My Loan Phung Le,
• Hye Rim Kim,
• In Young Kim,
• Sung Jin Kim,
• Van Man Tran and
• Vien Vo

Beilstein J. Nanotechnol. 2023, 14, 751–761, doi:10.3762/bjnano.14.62

• performance of the electrode (432.3 mAh·g−1 at a specific current of 5000 mA·g−1) are attributed to the enhancement in distribution and chemical contact between Ge nanoparticles and the biomass-based carbon matrix. A comparison with other synthesis routes has been conducted to demonstrate the effectiveness of

• GeO2 and biomass-derived carbon as precursor. A series of experiments using other methods to combine Ge and biomass carbon was also conducted for comparison. The in situ synthesized electrode exhibits superior electrochemical performance in lithium storage. This is attributed to a better contact

• patterns of pure Ge, biomass-derived activated carbon, and as-synthesized Ge@C composites are shown in Figure 1a. The pattern of Ge pattern exhibits reflections at 2θ = 27.3°, 45.3°, 53.7°, 66.0°, and 72.8°, corresponding to the (111), (220), (311), (400), and (331) crystal planes of cubic Ge (space group

Titania nanoparticles for photocatalytic degradation of ethanol under simulated solar light

• Evghenii Goncearenco,
• Iuliana P. Morjan,
• Claudiu Teodor Fleaca,
• Florian Dumitrache,
• Elena Dutu,
• Monica Scarisoreanu,
• Valentin Serban Teodorescu,
• Alexandra Sandulescu,
• Crina Anastasescu and
• Ioan Balint

Beilstein J. Nanotechnol. 2023, 14, 616–630, doi:10.3762/bjnano.14.51

• great interest because ethanol is an inexpensive compound and can be produced by biomass. However, it can be also largely found as pollutant in air and wastewater emerging from industrial activities. There are several pathways to convert ethanol to hydrogen, namely thermochemical, hydrothermal

• electrochemical, and photochemical methods [25]. Ethanol obtained from biomass is a renewable resource, and hydrogen has a high energy content and does not produce greenhouse gases by burning. Hence, it is an ideal combustible for the future [25]. TiO2 has some advantages over commonly used catalytic Pt- or Pt

Nanoarchitectonics to entrap living cells in silica-based systems: encapsulations with yolk–shell and sepiolite nanomaterials

• Celia Martín-Morales,
• Jorge Fernández-Méndez,
• Pilar Aranda and
• Eduardo Ruiz-Hitzky

Beilstein J. Nanotechnol. 2023, 14, 522–534, doi:10.3762/bjnano.14.43

• than free cells (Table 3). This behaviour may indicate that encapsulation indeed promotes a metabolic shift towards metabolite production rather than biomass formation. However, it is worth noting that after five days of growth, the ethanol concentration was probably sufficiently high to render the

• until reaching a depth of 5 mm. Then the material was air dried for at least 24 h until a viscous, non-sticky elastic film was formed. For sepiolite–chitosan foams, the same preparation procedure was followed, but the sepiolite–chitosan dispersion was not mixed with biomass and freeze-dried instead of

• nanoparticles to reach the desired weight percentage (5.0% to 7.0%). Eventually, the concentrated cell biomass (33% to 40% v/v) was then added and the mixture was placed in a 7 cm diameter Petri dish, where it gelled at room temperature after the addition of 0.2 M KOH to achieve pH 7–8. Table 1 gathers the

Application of nanoarchitectonics in moist-electric generation

• Jia-Cheng Feng and
• Hong Xia

Beilstein J. Nanotechnol. 2022, 13, 1185–1200, doi:10.3762/bjnano.13.99

• materials such as paper [79], cellulose nanofibrils, which were exfoliated mechanically from naturally biomass [80], natural wood [81]. In other works with cellulose doping [55][82][83], voltages of, respectively, 250, 100, and 300 mV were obtained. Li et al. studied in detail the effects of various

Recent advances in green carbon dots (2015–2022): synthesis, metal ion sensing, and biological applications

• Aisha Kanwal,
• Naheed Bibi,
• Sajjad Hyder,
• Arif Muhammad,
• Hao Ren,
• Jiangtao Liu and
• Zhongli Lei

Beilstein J. Nanotechnol. 2022, 13, 1068–1107, doi:10.3762/bjnano.13.93

• . Sharma et al. reported an excellent review article on the green synthesis of CDs in 2017 [43]. Recently, Tejwan et al. [44] and Lin et al. [45] also reported review articles about synthesis and applications of CDs obtained from green precursors. Meng et al. reviewed CDs made from biomass and their

• synthesis of carbon dots Green synthesis of CDs mainly utilizes biomass. Biomass synthesis makes use of natural raw materials (organisms, waste material, protein products, or natural polymers), instead of reaction precursors usually used in the traditional methods, and also requires external energy supply

• -wavelength region). Since biomass is abundant in carbon and oxygen, the resulting CDs have carbonyl groups on their surface. Excited electrons resulting from n–π* transitions emit blue fluorescence on radiative recombination. In general, blue fluorescence arise as a result of π–π* transition of the carbon

Progress and innovation of nanostructured sulfur cathodes and metal-free anodes for room-temperature Na–S batteries

• Marina Tabuyo-Martínez,
• Bernd Wicklein and
• Pilar Aranda

Beilstein J. Nanotechnol. 2021, 12, 995–1020, doi:10.3762/bjnano.12.75

• and improvement. Hard carbon anodes A somewhat more conventional approach to Na metal-free anodes is the use of hard carbon, also termed non-graphitizable carbon [82][85]. These are disorganized carbon materials with turbostratic nanoscale domains produced by pyrolysis of biomass, also including

The role of deep eutectic solvents and carrageenan in synthesizing biocompatible anisotropic metal nanoparticles

• Nabojit Das,
• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2021, 12, 924–938, doi:10.3762/bjnano.12.69

• cellulose biomass [77]. Although the applications of DESs mentioned above lie at the interface of material and biological science, the following section will only discuss application of DESs in nanomaterial synthesis. As mentioned earlier, the high solubility of metal salts in DESs makes them an ideal

Comprehensive review on ultrasound-responsive theranostic nanomaterials: mechanisms, structures and medical applications

• Sepand Tehrani Fateh,
• Lida Moradi,
• Elmira Kohan,
• Michael R. Hamblin and
• Amin Shiralizadeh Dezfuli

Beilstein J. Nanotechnol. 2021, 12, 808–862, doi:10.3762/bjnano.12.64

Physical constraints lead to parallel evolution of micro- and nanostructures of animal adhesive pads: a review

• Thies H. Büscher and
• Stanislav N. Gorb

Beilstein J. Nanotechnol. 2021, 12, 725–743, doi:10.3762/bjnano.12.57

• by more than one million described species, insects constitute the majority of animals on earth. With their astonishing diversity, they are one of the most remarkable lineages in the 3.5 billion years of life history on this planet [36]. Insects are, in terms of diversity, biomass, and organismic

A review on the biological effects of nanomaterials on silkworm (Bombyx mori)

• Sandra Senyo Fometu,
• Guohua Wu,
• Lin Ma and
• Joan Shine Davids

Beilstein J. Nanotechnol. 2021, 12, 190–202, doi:10.3762/bjnano.12.15

• , 212018, PR China 10.3762/bjnano.12.15 Abstract The production of high-quality silkworm silk is of importance in sericulture in addition to the production of biomass, silk proteins, and animal feed. The distinctive properties of nanomaterials have the potential to improve the development of various

A review on the green and sustainable synthesis of silver nanoparticles and one-dimensional silver nanostructures

• Sina Kaabipour and
• Shohreh Hemmati

Beilstein J. Nanotechnol. 2021, 12, 102–136, doi:10.3762/bjnano.12.9

• synthesis of AgNPs, as they can accumulate Ag atoms on the cell walls [104]. The bacteriogenic synthesis process can be either extracellular or intracellular. AgNPs are synthesized either by the biomass [267] or the cell culture supernatant [259]. AgNPs synthesized using bacteriogenic pathogens are commonly

• amides corresponding to cellular proteins and enzymes, are responsible for the synthesis and stabilization of AgNPs (Table 2). These components are present in both the biomass and the cell culture supernatant. It was previously demonstrated that the synthesis rate can be faster for some bacterial strains

• ]. For most applications, the single-cell type of the organism known as microalgae is used to synthesize AgNPs [191]. This enables formation of homogeneous microalgal suspensions which can be used directly for the synthesis process. In the synthesis process, the microalgal biomass in the aqueous phase

Bio-imaging with the helium-ion microscope: A review

• Matthias Schmidt,
• James M. Byrne and
• Ilari J. Maasilta

Beilstein J. Nanotechnol. 2021, 12, 1–23, doi:10.3762/bjnano.12.1

• they investigated E.coli which were exposed to TiO2 nanoparticles with the sector-field spectrometer [36]. The authors report on secondary ion maps of CN− from the biomass as well as of Ti+ from the nanoparticles. So far, the mass resolution achieved does not allow for using HIM-SIMS to characterise

Self-standing heterostructured NiC_x-NiFe-NC/biochar as a highly efficient cathode for lithium–oxygen batteries

• Shengyu Jing,
• Xu Gong,
• Shan Ji,
• Linhui Jia,
• Bruno G. Pollet,
• Sheng Yan and
• Huagen Liang

Beilstein J. Nanotechnol. 2020, 11, 1809–1821, doi:10.3762/bjnano.11.163

• porous cubic nanostructure exhibiting excellent catalytic properties [36][37]. Biomass materials can be used to prepare N-doped carbons since their proteins contain nitrogen atoms. This method is an economically viable way to produce N-doped carbons at a large scale [38][39]. Our group has synthesized a

• series of 3D self-standing electrodes [40][41][42][43] by depositing MOFs on biomass followed by either a carbonization or a phosphating step. These electrodes can be directly used as cathodes in Li–O2 batteries. In this work, the NiFe-PBA/pomelo peel (PP) precursors were prepared in a similar way as in

Silver-decorated gel-shell nanobeads: physicochemical characterization and evaluation of antibacterial properties

• Marta Bartel,
• Katarzyna Markowska,
• Marcin Strawski,
• Krystyna Wolska and
• Maciej Mazur

Beilstein J. Nanotechnol. 2020, 11, 620–630, doi:10.3762/bjnano.11.49

• silver nanoparticles. Radzig and co-workers observed that Ag nanoparticles of 8.3 ± 1.9 nm in size hamper the biofilm formation of E. coli and P. aeruginosa. The reduction of bacterial biomass in the biofilm was visible when the concentration was higher than 5 μg/mL for E. coli and 10 μg/mL for P

Soybean-derived blue photoluminescent carbon dots

• Shanshan Wang,
• Wei Sun,
• Dong-sheng Yang and
• Fuqian Yang

Beilstein J. Nanotechnol. 2020, 11, 606–619, doi:10.3762/bjnano.11.48

• Engineering and Environmental Engineering, Liaoning Shihua University, Fushun, Liaoning, 113001, China 10.3762/bjnano.11.48 Abstract Biomass-derived carbon dots (CDs) are biocompatible and have potential for a variety of applications, including bioimaging and biosensing. In this work, we use ground soybean

• to introduce N-surface-functional groups to carbon nanoparticles made from biomass and biowaste and to produce stable photoluminescent CDs with excellent water-wettability. Keywords: biomass; carbon dots; hydrothermal process; laser ablation; N-doping; photoluminescence; Introduction Carbon-based

• luminescence properties. Hydrothermal carbonization (HTC), which can be considered as a “green technology”, has been used to produce photoluminescent CDs from biomass, including glucose, sucrose, citric acid [19], chitosan [20], orange juice [21], grass [22] and soy milk [10]. For example, Sahu et al. [21

Adsorptive removal of bulky dye molecules from water with mesoporous polyaniline-derived carbon

• Hyung Jun An,
• Jong Min Park,
• Nazmul Abedin Khan and
• Sung Hwa Jhung

Beilstein J. Nanotechnol. 2020, 11, 597–605, doi:10.3762/bjnano.11.47

• regarded to be very effective and attractive because of its operation under mild conditions and no need of oxidant, active catalyst, and irradiation [8][9]. Therefore, adsorption with carbon nanotubes, activated carbon (AC), biomass, and metallic–organic frameworks (MOFs) has been actively studied for the

Synthesis of highly active ETS-10-based titanosilicate for heterogeneously catalyzed transesterification of triglycerides

• Muhammad A. Zaheer,
• David Poppitz,
• Khavar Feyzullayeva,
• Marianne Wenzel,
• Jörg Matysik,
• Radomir Ljupkovic,
• Aleksandra Zarubica,
• Alexander A. Karavaev,
• Andreas Pöppl,
• Roger Gläser and
• Muslim Dvoyashkin

Beilstein J. Nanotechnol. 2019, 10, 2039–2061, doi:10.3762/bjnano.10.200

• removal [13]. Amongst the prospective solid catalysts designed for transesterification reactions, such as calcium [14] and other metal oxides [15], metal–organic frameworks (MOFs) [10], silica-supported catalysts [16], biochar [17] and other biomass-derived catalysts [18], zeolites and molecular sieves

Upcycling of polyurethane waste by mechanochemistry: synthesis of N-doped porous carbon materials for supercapacitor applications

• Christina Schneidermann,
• Pascal Otto,
• Desirée Leistenschneider,
• Sven Grätz,
• Claudia Eßbach and
• Lars Borchardt

Beilstein J. Nanotechnol. 2019, 10, 1618–1627, doi:10.3762/bjnano.10.157

• from coconut shells and other biomass waste [19][20][21]. However, the industrial use of plastics for this purpose has not been established yet. The main properties of porous carbon materials [22][23] such as high specific surface area and high electrical conductivity allow for a variety of

Glucose-derived carbon materials with tailored properties as electrocatalysts for the oxygen reduction reaction

• Rafael Gomes Morais,
• Natalia Rey-Raap,
• José Luís Figueiredo and
• Manuel Fernando Ribeiro Pereira

Beilstein J. Nanotechnol. 2019, 10, 1089–1102, doi:10.3762/bjnano.10.109

• -doped biomass-derived carbon materials were prepared by hydrothermal carbonization of glucose, and their textural and chemical properties were subsequently tailored to achieve materials with enhanced electrochemical performance towards the oxygen reduction reaction. Carbonization and physical activation

• nitrides [30], activated carbons [31] or mesoporous carbons [32][33]. Some of these materials are obtained from chemical compounds, fossil fuels or by complex and expensive synthesis procedures. In order to keep fuel cells as ecologically friendly as possible, the use of biomass as a carbon source appears

• to be an attractive alternative. In this context, hydrothermal carbonization (HTC) has appeared in recent years as an interesting strategy to obtain biomass-derived carbons due to its low cost and mild synthesis conditions, making the process environmentally friendly [34]. However, the main drawback

One-step nonhydrolytic sol–gel synthesis of mesoporous TiO₂ phosphonate hybrid materials

• Yanhui Wang,
• P. Hubert Mutin and
• Johan G. Alauzun

Beilstein J. Nanotechnol. 2019, 10, 356–362, doi:10.3762/bjnano.10.35

• of heterogeneous catalysis or selective adsorption. Their high hydrolytic stability over a wide range of pH [15] and the possibility to functionalize them with a variety of functional groups makes them particularly promising for applications in aqueous phase catalysis (e.g., for biomass conversion

Nanocellulose: Recent advances and its prospects in environmental remediation

• Katrina Pui Yee Shak,
• Yean Ling Pang and
• Shee Keat Mah

Beilstein J. Nanotechnol. 2018, 9, 2479–2498, doi:10.3762/bjnano.9.232

• the potential to overcome challenges pertaining to material biodegradability, renewability, cost, and energy. Furthermore, cellulose found in most lignocellulosic biomass, derived from agricultural waste, energy crops and forestry residues, provides a better option over food crops as a renewable

Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations

• Jaison Jeevanandam,
• Ahmed Barhoum,
• Yen S. Chan,
• Alain Dufresne and
• Michael K. Danquah

Beilstein J. Nanotechnol. 2018, 9, 1050–1074, doi:10.3762/bjnano.9.98

Colloidal solution of silver nanoparticles for label-free colorimetric sensing of ammonia in aqueous solutions

• Alessandro Buccolieri,
• Antonio Serra,
• Gabriele Giancane and
• Daniela Manno

Beilstein J. Nanotechnol. 2018, 9, 499–507, doi:10.3762/bjnano.9.48

• –vis spectroscopy; Introduction Important sources of ammonia include synthetic fertilizers, oceans, the burning of biomass, the decomposition of plants, natural land [1] and the chemical industry [2]. Ammonia is also an organic compound normally produced by human metabolism [3] through the urea cycle

Review on optofluidic microreactors for artificial photosynthesis

• Xiaowen Huang,
• Jianchun Wang,
• Tenghao Li,
• Jianmei Wang,
• Min Xu,
• Weixing Yu,
• Abdel El Abed and
• Xuming Zhang

Beilstein J. Nanotechnol. 2018, 9, 30–41, doi:10.3762/bjnano.9.5

• -photoreactors to culture microorganisms to produce microalgae, bioenergy and biomass [63]. Broadly speaking, these bio-photoreactors also belong to optofluidics-based APS, but they are not covered in this article since many of them use large reactors and are thus not related to microstructures. The following

Needs and challenges for assessing the environmental impacts of engineered nanomaterials (ENMs)

• Michelle Romero-Franco,
• Hilary A. Godwin,
• Muhammad Bilal and
• Yoram Cohen

Beilstein J. Nanotechnol. 2017, 8, 989–1014, doi:10.3762/bjnano.8.101