Piezoelectric nanogenerator for bio-mechanical strain measurement

• Zafar Javed,
• Lybah Rafiq,
• Muhammad Anwaar Nazeer,
• Saqib Siddiqui,
• Muhammad Babar Ramzan,
• Muhammad Qamar Khan and
• Muhammad Salman Naeem

Beilstein J. Nanotechnol. 2022, 13, 192–200, doi:10.3762/bjnano.13.14

• fluoride (PVDF) and other piezoelectric polymers are used in the form of fibers, filaments, and composites. In this research, PVDF nanofibers were developed and integrated onto a knitted fabric to fabricate a piezoelectric device for human body angle monitoring. Scanning electron microscopy and X-ray

• characterized through scanning electron microscopy (SEM) and X-ray diffraction (XRD) to determine morphology and crystalline structure, respectively. Sensor development, its embedding, and testing The prepared PVDF nanofibrous mesh was folded into a square shape (4 cm2) with 2 mm thickness for sensor

A photonic crystal material for the online detection of nonpolar hydrocarbon vapors

• Evgenii S. Bolshakov,
• Aleksander V. Ivanov,
• Andrei A. Kozlov,
• Anton S. Aksenov,
• Elena V. Isanbaeva,
• Sergei E. Kushnir,
• Aleksei D. Yapryntsev,
• Aleksander E. Baranchikov and
• Yury A. Zolotov

Beilstein J. Nanotechnol. 2022, 13, 127–136, doi:10.3762/bjnano.13.9

• array with a sensing matrix of polydimethylsiloxane, have been determined by using scanning electron microscopy and by the results of specular reflectance spectroscopy based on the Bragg–Snell law. A new approach has been proposed for the application of this sensor in chemical analysis for the

• electron microscopy. The investigated samples have an ordered lattice structure similar to crystals; therefore, the Bragg equation has been applied for the analysis. Since the diameter of particles in the lattice is in the submicrometer region, diffraction occurs in the visible spectrum, and it becomes

• . Black lines show the linear correspondence of the experimental data. (a) Photo of the sensor and (b) electron microscopy image of a CCA of polystyrene particles without a PDMS layer on a glass substrate (effective particle size = 201 nm). The data obtained with dynamic light scattering slightly

Bacterial safety study of the production process of hemoglobin-based oxygen carriers

• Axel Steffen,
• Yu Xiong,
• Radostina Georgieva,
• Ulrich Kalus and
• Hans Bäumler

Beilstein J. Nanotechnol. 2022, 13, 114–126, doi:10.3762/bjnano.13.8

• known to have an antibacterial effect and it is used as a disinfectant or for cold sterilization of medical instruments in hospitals at higher concentrations [22][23][24]. Glutaraldehyde is also widely used in biochemical applications and as a fixative for electron microscopy [25][26]. EDTA is used in

• CCD method produces nearly uniform, peanut-shaped particles. The size distribution determined by dynamic light scattering (DLS) was 759 ± 25 nm. Confocal laser scanning microscopy (CLSM) images confirmed this size range (Figure 1C). Scanning electron microscopy (SEM) images of particles produced with

Theranostic potential of self-luminescent branched polyethyleneimine-coated superparamagnetic iron oxide nanoparticles

• Rouhollah Khodadust,
• Ozlem Unal and
• Havva Yagci Acar

Beilstein J. Nanotechnol. 2022, 13, 82–95, doi:10.3762/bjnano.13.6

• synthesized luminescent SPION@bPEI was published by Unal et al. in 2018 [35]. The total organic content of the particles was determined to be 76% by TGA. The average crystal size of SPION@bPEI nanoparticles was measured from transmission electron microscopy (TEM) images to be approx. 6 nm (Figure 1a). The TEM

Influence of magnetic domain walls on all-optical magnetic toggle switching in a ferrimagnetic GdFe film

• Rahil Hosseinifar,
• Evangelos Golias,
• Ivar Kumberg,
• Quentin Guillet,
• Karl Frischmuth,
• Sangeeta Thakur,
• Mario Fix,
• Manfred Albrecht,
• Florian Kronast and
• Wolfgang Kuch

Beilstein J. Nanotechnol. 2022, 13, 74–81, doi:10.3762/bjnano.13.5

• deterministic toggle switching. Keywords: all-optical magnetic switching; GdFe; laser-induced domain-wall motion; magnetic domain imaging; photoemission electron microscopy; Introduction The reversal of magnetization at the fastest possible time scales and microscopic length scales is one of the most

• individual ultrashort focused laser pulses has been reported [21]. In this paper, we investigate nondeterministic all-optical toggle switching of a Gd26Fe74 film with out-of-plane easy axis of magnetization by magnetic imaging using photoemission electron microscopy (PEEM) with X-ray magnetic circular

Sputtering onto liquids: a critical review

• Anastasiya Sergievskaya,
• Adrien Chauvin and
• Stephanos Konstantinidis

Beilstein J. Nanotechnol. 2022, 13, 10–53, doi:10.3762/bjnano.13.2

• as [26][27][28][29][30][31]. Commercial table-top sputter coaters can be found, for example, in electron microscopy facilities and are part of the sample preparation protocol. They are used to coat the sample with a conductive material to facilitate the observation. These devices usually come with a

• be taken regarding the elemental composition of the deposited materials as it might depend on the position where the elemental analysis is made on the substrate, especially if a spatially resolved analysis is carried out by a technique such as scanning (transmission) electron microscopy combined with

• electron microscopy (TEM), it was shown that the Au sol formation process consists of an induction period followed by a rapid increase in the number of particles, followed by a linear increase, followed by a rapid decrease in the growth rate. In other words, the typical kinetic curve has a sigmoidal S

Measurement of polarization effects in dual-phase ceria-based oxygen permeation membranes using Kelvin probe force microscopy

• Kerstin Neuhaus,
• Christina Schmidt,
• Liudmila Fischer,
• Wilhelm Albert Meulenberg,
• Ke Ran,
• Joachim Mayer and
• Stefan Baumann

Beilstein J. Nanotechnol. 2021, 12, 1380–1391, doi:10.3762/bjnano.12.102

• Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1), Wilhelm-Johnen-Straße, 52452 Jülich, Germany Faculty of Science and Technology, Inorganic Membranes, University of Twente, 7500 AE Enschede, Netherlands Central Facility for Electron Microscopy GFE

• , KPFM measurements were started with an imaging velocity of 1 image per minute to measure the relaxation of the introduced gradient. Electron microscopy The TEM specimens were cut from 60CSO20-FC2O pellets by focused ion beam (FIB) milling using a FEI Strata400 system with Ga ion beam. Further thinning

• conducted with a FEI Titan G2 80-200 ChemiSTEM microscope equipped with an XFEG, a probe Cs corrector and a super-X EDXS system. Results and Discussion Electron microscopy A representative grain and phase distribution image of the sample is shown in Figure 1. The EFTEM image in Figure 1b clearly shows two

Chemical vapor deposition of germanium-rich CrGe_x nanowires

• Vladislav Dřínek,
• Stanislav Tiagulskyi,
• Roman Yatskiv,
• Jan Grym,
• Radek Fajgar,
• Věra Jandová,
• Martin Koštejn and
• Jaroslav Kupčík

Beilstein J. Nanotechnol. 2021, 12, 1365–1371, doi:10.3762/bjnano.12.100

• -resolution transmission electron microscopy, scanning electron microscopy, electron dispersive X-ray analysis, selected area electron diffraction, and X-ray photoelectron spectroscopy, showed that unlike nanoballs and particles composed of crystalline germanium, the layer was made of chromium germanide CrGex

• electron microscopy (SEM) setup (TESCAN Vega 3 InduSEM) equipped with an electron dispersive X-ray spectrometer (EDX, Bruker XFlash Detector 5010) for detecting the elemental composition. A standard automatic instrumental background was applied for the estimation of elemental composition. Individual

• nanoobjects were studied by transmission electron microscopy (TEM) performed on a Philips CM 120 (LaB6, 120 kV) equipped with a NanoMEGAS precession unit DigiStar, an Olympus SIS CCD camera Veleta (2048 × 2048 px), and a windowless detector Apollo XLTW for EDX measurements. Selected area electron diffraction

Biocompatibility and cytotoxicity in vitro of surface-functionalized drug-loaded spinel ferrite nanoparticles

• Sadaf Mushtaq,
• Khuram Shahzad,
• Tariq Saeed,
• Anwar Ul-Hamid,
• Bilal Haider Abbasi,
• Nafees Ahmad,
• Waqas Khalid,
• Muhammad Atif,
• Zulqurnain Ali and
• Rashda Abbasi

Beilstein J. Nanotechnol. 2021, 12, 1339–1364, doi:10.3762/bjnano.12.99

• phase of the samples is consistent with the XRD results. The formation of spherical NPs was confirmed by transmission electron microscopy (TEM) (Figure 2a). The nanospheres are uniformally distributed throughout the surface of the samples. High-resolution transmission electron microscopy (HR-TEM) images

• transmission electron microscopy (JEM 2100F) and energy dispersive spectroscopy (TESCAN-VEGA3), respectively. The magnetic behavior was determined by using a physical property measurement system (Quantum Design, USA). The colloidal stability and hydrodynamic size of NPs were studied by using a Zetasizer Nano

Enhancement of the piezoelectric coefficient in PVDF-TrFe/CoFe₂O₄ nanocomposites through DC magnetic poling

• Marco Fortunato,
• Alessio Tamburrano,
• Maria Paola Bracciale,
• Maria Laura Santarelli and
• Maria Sabrina Sarto

Beilstein J. Nanotechnol. 2021, 12, 1262–1270, doi:10.3762/bjnano.12.93

• verify the presence of the aggregates of the CoFe2O4 we investigated the morphology of the CoFe2O4 nanoparticles (Figure 5a) and of the PVDF-TrFe/CoFe2O4 nanocomposites (Figure 5b) using field-emission scanning electron microscopy (FESEM). As shown in Figure 5b, the morphology of the produced

Electrical, electrochemical and structural studies of a chlorine-derived ionic liquid-based polymer gel electrolyte

• Ashish Gupta,
• Amrita Jain,
• Manju Kumari and
• Santosh K. Tripathi

Beilstein J. Nanotechnol. 2021, 12, 1252–1261, doi:10.3762/bjnano.12.92

• surface morphology of a pure PVdF-HFP film, {(PVdF-HFP)-[BDiMIM][Cl]} (4:6), and ({(PVdF-HFP)-[BDiMIM][Cl]} (4:6)) (20 wt %) + [PC-Mg(ClO4)2 (0.3 M)] (80 wt %), where PC is the plasticizer propylene carbonate, was characterized using scanning electron microscopy (SEM) and is depicted in Figure 1a–c

Morphology-driven gas sensing by fabricated fractals: A review

• Vishal Kamathe and
• Rupali Nagar

Beilstein J. Nanotechnol. 2021, 12, 1187–1208, doi:10.3762/bjnano.12.88

• -assisted chemical etching was used by Qin et al. [79] to prepare a dendritic array of Si/WO3 NW composites, which was tested for the detection of NO2 gas at room temperature. Figure 17a–e SEM and high-resolution transmission electron microscopy (HR-TEM) images of Si/WO3 NWs. Figure 17f shows the XRD

The effect of cobalt on morphology, structure, and ORR activity of electrospun carbon fibre mats in aqueous alkaline environments

• Markus Gehring,
• Tobias Kutsch,
• Osmane Camara,
• Alexandre Merlen,
• Hermann Tempel,
• Hans Kungl and
• Rüdiger-A. Eichel

Beilstein J. Nanotechnol. 2021, 12, 1173–1186, doi:10.3762/bjnano.12.87

• fibres. In this study, cobalt-decorated fibres are prepared, and the influence of carbonisation temperature on the resulting particle decoration, as well as on fibre structure and morphology is discussed. Scanning electron microscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron

• electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, elemental analysis, and inductively coupled plasma optical emission spectrometry (ICP-OES). In addition, the fibres were analysed in terms of their

Self-assembly of amino acids toward functional biomaterials

• Huan Ren,
• Lifang Wu,
• Lina Tan,
• Yanni Bao,
• Yuchen Ma,
• Yong Jin and
• Qianli Zou

Beilstein J. Nanotechnol. 2021, 12, 1140–1150, doi:10.3762/bjnano.12.85

• mechanisms. Scanning electron microscopy and transmission electron microscopy images show that the assembly is layered and has a three-dimensional spherical structure with porous and stacked nanorods (width 50 nm, length 200 nm). During the self-assembly process, tetrakis(4-sulfonatophenyl)porphine and

pH-driven enhancement of anti-tubercular drug loading on iron oxide nanoparticles for drug delivery in macrophages

• Karishma Berta Cotta,
• Sarika Mehra and
• Rajdip Bandyopadhyaya

Beilstein J. Nanotechnol. 2021, 12, 1127–1139, doi:10.3762/bjnano.12.84

• ) measurements using a ZetaSizer (Malvern Instruments, UK). The refractive index and temperature used for the size measurement was 2.34 and 25 °C, respectively. Three replicates were measured for each sample. In addition, the nanoparticle diameter was also measured from transmission electron microscopy (TEM

• nanoparticles. (a) Dynamic light scattering plot of number (%) v/s size (nm) of the nanoparticles in solution at the end of synthesis (n = 3). (b) Transmission electron microscopy image with a 50 nm scale bar. (c) X-ray diffraction plot indicating the Bragg’s 2θ diffraction angles identical to peaks observed

• synthesis (n = 3). (b) Transmission electron microscopy image with a 50 nm scale bar. (c) X-ray diffraction pattern indicating the Bragg’s angle corresponding to those observed in iron oxide. (d) FTIR plot of transmittance v/s wavenumber depicting functional groups of iron oxide. Drug release profile over

First-principles study of the structural, optoelectronic and thermophysical properties of the π-SnSe for thermoelectric applications

• Muhammad Atif Sattar,
• Najwa Al Bouzieh,
• Maamar Benkraouda and
• Noureddine Amrane

Beilstein J. Nanotechnol. 2021, 12, 1101–1114, doi:10.3762/bjnano.12.82

• transmission electron microscopy. As SnS and SnSe share a lot in common, both chemically and structurally, an experimental study verified that the π-SnS prototype exists in the form of π-SnSe. The phase stability of π-SnSe is also confirmed by Golan et al. [47]. By using density functional theory (DFT

Assessment of the optical and electrical properties of light-emitting diodes containing carbon-based nanostructures and plasmonic nanoparticles: a review

• Keshav Nagpal,
• Erwan Rauwel,
• Frédérique Ducroquet and
• Protima Rauwel

Beilstein J. Nanotechnol. 2021, 12, 1078–1092, doi:10.3762/bjnano.12.80

• of 20 mA/cm2. Similarly, the roles of Ag-doped ZnO and pristine ZnO as EIL in the imidazole organic EML-based HyLED were compared [61]. The transmission electron microscopy (TEM) images of Figure 8 illustrate that the pristine ZnO NP are larger (≈50 nm) than the Ag-doped ZnO (≈15 nm). In addition

• -layer (4L) graphene and (b) the I–V characteristics of UV LED with and without few-layer graphene-based conductive electrodes. Figure 1a and Figure 1b were adapted from [39], with the permission of AIP Publishing. This content is not subject to CC BY 4.0. Cross-sectional scanning electron microscopy

• AIP Publishing. This content is not subject to CC BY 4.0. Transmission electron microscopy images for (a) pristine ZnO and (b) 2–3% Ag-doped ZnO. Figure 8a and Figure 8b were adapted from [61], J. Photochem. Photobiol. A, vol. 325, by J. Jayabharathi; A. Prabhakaran; V. Thanikachalam; M. Sundharesan

An overview of microneedle applications, materials, and fabrication methods

• Zahra Faraji Rad,
• Philip D. Prewett and
• Graham J. Davies

Beilstein J. Nanotechnol. 2021, 12, 1034–1046, doi:10.3762/bjnano.12.77

• et al., published by SAGE, distributed under the terms of Creative Commons Attribution-NonCommercial 4.0 License (http://www.creativecommons.org/licenses/by-nc/4.0/). This content is not subject to CC BY 4.0.). Scanning electron microscopy (SEM) image of a 5.3 mm long silicon microneedle fabricated

Revealing the formation mechanism and band gap tuning of Sb₂S₃ nanoparticles

• Maximilian Joschko,
• Franck Yvan Fotue Wafo,
• Christina Malsi,
• Danilo Kisić,
• Ivana Validžić and
• Christina Graf

Beilstein J. Nanotechnol. 2021, 12, 1021–1033, doi:10.3762/bjnano.12.76

• different reaction time points were characterized by transmission electron microscopy (TEM, Figure 1a–c) and scanning electron microscopy (SEM, Figure 1d–f). The images show that small nanoparticles (type I) were formed about 2 min (Figure 1a) after injecting the antimony precursor Sb-EHA. The bright orange

• 0.025°. The second device was a STOE STADI P equipped with a Dectris MYTHEN2 R detector and a Cu Kα1 radiation source (40 kV, 40 mA) with a radiation wavelength of 0.15405 nm. The angle range of the measurements was 6–96° 2θ with a step size of 0.015°. Electron microscopy (EM) images of Sb2S3

A Au/CuNiCoS₄/p-Si photodiode: electrical and morphological characterization

• Adem Koçyiğit,
• Adem Sarılmaz,
• Teoman Öztürk,
• Faruk Ozel and
• Murat Yıldırım

Beilstein J. Nanotechnol. 2021, 12, 984–994, doi:10.3762/bjnano.12.74

• transmission electron microscopy (HR-TEM), and energy-dispersive X-ray spectroscopy (EDS). The XRD, EDS, and HR-TEM analyses confirmed the successful synthesis of CuNiCoS4. The obtained CuNiCoS4 thiospinel nanocrystals were tested for photodiode and capacitance applications as interfacial layer between Au and

Is the Ne operation of the helium ion microscope suitable for electron backscatter diffraction sample preparation?

• Annalena Wolff

Beilstein J. Nanotechnol. 2021, 12, 965–983, doi:10.3762/bjnano.12.73

• , defects such as interstitials or vacancies can be created [23]. This can induce a significant amount of crystal structure alterations in a sample and thus artefacts. While these artefacts are well recognized for transmission electron microscopy (TEM) lamella preparation, in which the lamella preparation

• transmission electron microscopy (STEM), TEM, TEM selected area electron diffraction (SAED), and TEM dark-field (DF) measurements. The results for each experiment are compared to those of a non-irradiated area of the Cu TEM grid. Monte Carlo simulations of the occurring ion–solid interactions are evaluated to

Uniform arrays of gold nanoelectrodes with tuneable recess depth

• Elena O. Gordeeva,
• Ilya V. Roslyakov,
• Alexey P. Leontiev,
• Alexey A. Klimenko and
• Kirill S. Napolskii

Beilstein J. Nanotechnol. 2021, 12, 957–964, doi:10.3762/bjnano.12.72

• surface of the porous template and the top surface of the nanoelectrodes. A set of complementary techniques, including chronoamperometry, coulometry, and scanning electron microscopy, are used to characterize the nanoelectrode arrays. The number of active nanoelectrodes is experimentally measured. The

• address the third issue, a new design of the Au NEAs with a multi-layered structure has been suggested. The fourth requirement has been proved experimentally using electrochemical methods and scanning electron microscopy. Results and Discussion The first stage of NEA preparation (Figure 1a) was the

Self-assembly of Eucalyptus gunnii wax tubules and pure ß-diketone on HOPG and glass

• Miriam Anna Huth,
• Axel Huth and
• Kerstin Koch

Beilstein J. Nanotechnol. 2021, 12, 939–949, doi:10.3762/bjnano.12.70

• is unknown. In this study, extracted wax of E. gunnii leaves and pure ß-diketone were recrystallized on two different artificial materials and analyzed by scanning electron microscopy (SEM) and atomic force microscopy (AFM) to study their formation process. Both the wax mixture and pure ß-diketone

• .) was analyzed by GC–FID and provided by Prof. P. von Wettstein-Knowles, University of Copenhagen, Denmark. For recrystallization, a 20 µL droplet of the wax solution and of the ß-diketone solution, respectively, were applied to the substrates at room temperature. Scanning electron microscopy The

• attempts to find suitable areas to observe the growth of 3D structures. This caused a delay of some minutes to start the observation. Distribution of recrystallized structures Scanning electron microscopy investigations of recrystallized structures showed a circular pattern with areas of greater and lesser

The role of deep eutectic solvents and carrageenan in synthesizing biocompatible anisotropic metal nanoparticles

• Nabojit Das,
• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2021, 12, 924–938, doi:10.3762/bjnano.12.69

• toxic and considered biologically inert [44][57][58]. Numerous in vitro studies carried out using high-throughput techniques such as microscopic techniques, TEM, and ICP-MS revealed the fate of nanoparticles and their interaction at the interface between the metal surface and cell membrane. Electron

• microscopy revealed fundamental and mechanistic information regarding nanoparticle–cell interactions and their uptake into cell organelles. The metal content within the cells was determined via ICP-MS. Cell toxicity of nanoparticles depends on their size, shape, surface chemistry (predominantly determined by

In situ transport characterization of magnetic states in Nb/Co superconductor/ferromagnet heterostructures

• Olena M. Kapran,
• Roman Morari,
• Taras Golod,
• Evgenii A. Borodianskyi,
• Vladimir Boian,
• Andrei Prepelita,
• Nikolay Klenov,
• Anatoli S. Sidorenko and
• Vladimir M. Krasnov

Beilstein J. Nanotechnol. 2021, 12, 913–923, doi:10.3762/bjnano.12.68

• were used for the calibration of the etching rates of the films. MLs are patterned into micrometer-scale bridges with multiple contacts using photolithography and reactive ion etching. A scanning electron microscopy (SEM) image of one of the studied samples is shown in Figure 1a. Control of the