Modification of a SERS-active Ag surface to promote adsorption of charged analytes: effect of Cu²⁺ ions

• Bahdan V. Ranishenka,
• Andrei Yu. Panarin,
• Irina A. Chelnokova,
• Sergei N. Terekhov,
• Peter Mojzes and
• Vadim V. Shmanai

Beilstein J. Nanotechnol. 2021, 12, 902–912, doi:10.3762/bjnano.12.67

• agreement with electron microscopy and literature [30]. Immobilization of Ag NPs on a glass surface Utilizing glass slides for the preparation of SERS substrates permitted us to use siloxane chemistry to modify the surface and to control the immobilization process via the absorption spectra. Glass also

• microscopy (SEM) images were recorded using a Zeiss LEO SUPRA 25 (Germany). Transmitting electron microscopy (TEM) images were recorded using a Zeiss LEO 906E (Germany). SEM and TEM images were treated using ImageJ 1.51k freeware. AFM images were scanned in air using a BioScopeResolve (Bruker) atomic force

The role of convolutional neural networks in scanning probe microscopy: a review

• Ido Azuri,
• Irit Rosenhek-Goldian,
• Neta Regev-Rudzki,
• Georg Fantner and
• Sidney R. Cohen

Beilstein J. Nanotechnol. 2021, 12, 878–901, doi:10.3762/bjnano.12.66

• ][94], beginning with the more abundant examples of optical and electron microscopy, which will later be compared and contrasted with applications in SPM [95]. Strategies for obtaining training data Successful application of deep learning relies on the quality (e.g. signal/noise, resolution, and

• , fluorescence microscopy, and serial block-face scanning electron microscopy (SBEM) micrographs [108]. Deep learning techniques have been developed for segmentation and tracing of neurons in volume electron microscopy for synaptic connectivity reconstruction. Mitochondria, synapses, axons, dendrites, spines

• learning was also applied to reduce noise and increase the resolution in scanning electron microscopy images. An approach for creating a training dataset of low- and high-resolution image pairs from a single image, was developed by using deep learning to up-sample scanning transmission electron microscopy

Silver nanoparticles nucleated in NaOH-treated halloysite: a potential antimicrobial material

• Yuri B. Matos,
• Rodrigo S. Romanus,
• Mattheus Torquato,
• Edgar H. de Souza,
• Rodrigo L. Villanova,
• Marlene Soares and
• Emilson R. Viana

Beilstein J. Nanotechnol. 2021, 12, 798–807, doi:10.3762/bjnano.12.63

• studied the nucleation of silver on halloysite substrates modified by chemical treatment with NaOH. The resulting stabilized Ag-NPs were characterized by X-ray diffraction, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The nucleation was characterized by thermogravimetric

• matrix and additive was tested through coating the Ag-NPs with dodecanethiol, a non-polar surfactant. The resulting composites were characterized by scanning electron microscopy and in terms of surface antimicrobial activity. The results demonstrate that the Ag-NPs synthesized in this work are indeed

• . Transmission electron microscopy (TEM) was performed in a Jeol JEM-1400 plus (480 keV), energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) in a Zeiss EVO MA15, and thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) in a simultaneous thermal analyzer

Silver nanoparticles induce the cardiomyogenic differentiation of bone marrow derived mesenchymal stem cells via telomere length extension

• Khosro Adibkia,
• Ali Ehsani,
• Asma Jodaei,
• Ezzatollah Fathi,
• Raheleh Farahzadi and
• Mohammad Barzegar-Jalali

Beilstein J. Nanotechnol. 2021, 12, 786–797, doi:10.3762/bjnano.12.62

• Nanomaterials) and purchased from Iranian Nanomaterial Pioneers Company. Ag-NPs structure The Ag-NP powder was dispersed in distilled water without adding surfactants. Ag-NPs with a size of 50–80 nm and 99% purity were used (Table 1). The vendor carried out scanning electron microscopy analysis in the Nano

9.1% efficient zinc oxide/silicon solar cells on a 50 μm thick Si absorber

• Rafal Pietruszka,
• Bartlomiej S. Witkowski,
• Monika Ozga,
• Katarzyna Gwozdz,
• Ewa Placzek-Popko and
• Marek Godlewski

Beilstein J. Nanotechnol. 2021, 12, 766–774, doi:10.3762/bjnano.12.60

• structured top electrodes were examined by numerous measuring techniques. Scanning electron microscopy revealed a grain-like morphology of the magnesium-doped zinc oxide film. The size of the grains is closely related to the structure of the nanorods. The external quantum efficiency of the cells was measured

• Figure 1. Results and Discussion Figure 2 shows as-grown zinc oxide nanorods on the silicon surface grown by the hydrothermal method described above. Scanning electron microscopy (SEM) images revealed that the shape of the nanorods is hexagonal. The estimated width of hexagonal rods equals 160 ± 5 nm and

• . Schematic images of final PV structures studied in this work: (a) SC with ZnONR, (b) planar SC. Scanning electron microscopy images of zinc oxide nanorods on the silicon surface: (a) top view, (b) cross section. SEM images of ZnO/Si solar cells: (a) modified with nanorods, (b) planar. Surface morphology of

Physical constraints lead to parallel evolution of micro- and nanostructures of animal adhesive pads: a review

• Thies H. Büscher and
• Stanislav N. Gorb

Beilstein J. Nanotechnol. 2021, 12, 725–743, doi:10.3762/bjnano.12.57

• of Polyneoptera (following [122]). Coloured squares indicate the type of attachment pads, 1different pad types on the same tarsus, and 2in different species. Scanning electron microscopy (SEM) images of a typical phasmatodean tarsus. Orestes draegeri Bresseel & Constant, 2018. (A) Ventral view. (B

Fate and transformation of silver nanoparticles in different biological conditions

• Barbara Pem,
• Marija Ćurlin,
• Darija Domazet Jurašin,
• Valerije Vrček,
• Rinea Barbir,
• Vedran Micek,
• Raluca M. Fratila,
• Jesus M. de la Fuente and
• Ivana Vinković Vrček

Beilstein J. Nanotechnol. 2021, 12, 665–679, doi:10.3762/bjnano.12.53

• implementing light scattering (dynamic and electrophoretic) techniques, spectroscopy (UV–vis, atomic absorption, nuclear magnetic resonance) and transmission electron microscopy. The obtained results demonstrated that AgNPs may transform very quickly during their journey through different biological conditions

• absorption spectroscopy (GF-AAS), nuclear magnetic resonance (NMR) spectroscopy, and transmission electron microscopy (TEM) experiments. Physicochemical characteristics of freshly prepared AgNPs Freshly prepared AgNPs coated with PVP, sodium bis(2-ethylhexyl)sulfosuccinate (AOT), and poly(ʟ-lysine) (PLL

• . The results are presented as % of the dissolved Ag fraction compared to the total Ag content in AgNP suspensions before filtration. Transmission electron microscopy was performed for different AgNPs dispersed in PBS, mCYS, and mGSH media at a concentration of 10 mg Ag/L after 30 min of incubation. The

A review of defect engineering, ion implantation, and nanofabrication using the helium ion microscope

• Frances I. Allen

Beilstein J. Nanotechnol. 2021, 12, 633–664, doi:10.3762/bjnano.12.52

• beam milling that were inspected by transmission electron microscopy (TEM). In this way, the microstructural effect of increasing the helium ion-induced defect density was probed, and threshold doses for a series of structural changes, such as amorphization and subsurface swelling, were established

High-yield synthesis of silver nanowires for transparent conducting PET films

• Gul Naz,
• Hafsa Asghar,
• Muhammad Ramzan,
• Muhammad Arshad,
• Rashid Ahmed,
• Muhammad Bilal Tahir,
• Bakhtiar Ul Haq,
• Nadeem Baig and
• Junaid Jalil

Beilstein J. Nanotechnol. 2021, 12, 624–632, doi:10.3762/bjnano.12.51

• alignment on a large scale and were characterized by UV–vis spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and PL spectroscopy. The luminescent AgNWs exhibited red emission, which was accredited to deep holes. The SEM results confirmed the formation of AgNWs of 3.3 to 4.7 µm in

Stability and activity of platinum nanoparticles in the oxygen electroreduction reaction: is size or uniformity of primary importance?

• Kirill O. Paperzh,
• Anastasia A. Alekseenko,
• Vadim A. Volochaev,
• Ilya V. Pankov,
• Olga A. Safronenko and
• Vladimir E. Guterman

Beilstein J. Nanotechnol. 2021, 12, 593–606, doi:10.3762/bjnano.12.49

• University, "High-Resolution Transmission Electron Microscopy” Shared Use Center, 344090, 194/2 Stachki st., Rostov-on-Don, Russia 10.3762/bjnano.12.49 Abstract Platinum–carbon catalysts are widely used in the manufacturing of proton-exchange membrane fuel cells. Increasing Pt/C activity and stability is an

• distributions were also studied by transmission electron microscopy (TEM). The TEM images were obtained using a JEOL JEM F200 microscope (voltage 200 kV, current 12–15 μA, CFEG). To prepare a sample for measurements, 0.5 mg of the catalyst was placed into 1 mL of isopropanol and dispersed by ultrasound for 10

• in the catalysts ranged from 1.2 (samples G20 and G25) to 1.3 nm (G30, G35, and G40) (Table 2). A selective electron microscopy study of the synthesized materials (Figure 2) showed that with an increase in the Pt loading in the catalysts, the average nanoparticle size also increased from 2 (G20) to

Impact of GaAs(100) surface preparation on EQE of AZO/Al₂O₃/p-GaAs photovoltaic structures

• Piotr Caban,
• Rafał Pietruszka,
• Jarosław Kaszewski,
• Monika Ożga,
• Bartłomiej S. Witkowski,
• Krzysztof Kopalko,
• Piotr Kuźmiuk,
• Katarzyna Gwóźdź,
• Ewa Płaczek-Popko,
• Krystyna Lawniczak-Jablonska and
• Marek Godlewski

Beilstein J. Nanotechnol. 2021, 12, 578–592, doi:10.3762/bjnano.12.48

• ) and scanning electron microscopy (SEM) examinations were conducted to obtain structural details of the devices. X-ray photoelectron spectroscopy (XPS) with depth profiling was used to examine interface structure and changes in the elemental content and chemical bonds. The photoluminescence (PL

Properties of graphene deposited on GaN nanowires: influence of nanowire roughness, self-induced nanogating and defects

• Jakub Kierdaszuk,
• Piotr Kaźmierczak,
• Justyna Grzonka,
• Aleksandra Krajewska,
• Aleksandra Przewłoka,
• Wawrzyniec Kaszub,
• Zbigniew R. Zytkiewicz,
• Marta Sobanska,
• Maria Kamińska,
• Andrzej Wysmołek and
• Aneta Drabińska

Beilstein J. Nanotechnol. 2021, 12, 566–577, doi:10.3762/bjnano.12.47

• distinct groups of NWs were observed – approx. 80% of them were 1 μm in height while approx. 20% reached 1.5 μm. The samples were studied by scanning electron microscopy (SEM) using a SU8230 Hitachi microscope equipped with an in-lens secondary electron detector at 5 kV electron beam voltage. The Raman

On the stability of microwave-fabricated SERS substrates – chemical and morphological considerations

• Limin Wang,
• Aisha Adebola Womiloju,
• Christiane Höppener,
• Ulrich S. Schubert and
• Stephanie Hoeppener

Beilstein J. Nanotechnol. 2021, 12, 541–551, doi:10.3762/bjnano.12.44

• of different organic solvents and buffer solutions. Keywords: chemical stability; microwave synthesis; scanning electron microscopy; silver nanoparticles; surface-enhanced Raman spectroscopy; Introduction Surface-enhanced Raman spectroscopy (SERS) has been developed into a standard analytical tool

• substrates is studied via scanning electron microscopy (SEM) and their impact on the SERS enhancement capabilities of the substrates is evaluated by Raman spectroscopy (Figure 1b). For this purpose, all treated substrates are carefully rinsed after immersion into the solvents and buffers and are subsequently

• SERS spectra. The error analysis at 1078 cm−1 for all SERS experiments was carried out on approximately 60 randomly chosen spots for each SERS sample. Scanning electron microscopy characterization Before the SEM investigation, the SERS substrates were mounted onto sample holders with double-sided

The preparation temperature influences the physicochemical nature and activity of nanoceria

• Robert A. Yokel,
• Wendel Wohlleben,
• Johannes Georg Keller,
• Matthew L. Hancock,
• Jason M. Unrine,
• D. Allan Butterfield and
• Eric A. Grulke

Beilstein J. Nanotechnol. 2021, 12, 525–540, doi:10.3762/bjnano.12.43

• characterizations. Transmission electron microscopy (TEM) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) were conducted of NM-212 dispersed in DI water, sonicated for 10 min in a bath, and captured on 300 mesh lacey carbon copper grids dipped into the dispersion for

• approximately 5 s and dried overnight at room temperature. Electron microscopy was performed on a Thermo Scientific Talos F200X operated at an accelerating voltage of 200 keV. Images were recorded with a Ceta CCD camera. The mean and Feret diameters and area, and their standard deviation, minimum, and maximum

• nanoceria, described in Supporting Information File 1, Table S1, were calcined by heating in porcelain crucibles in a muffle furnace to 900 °C at a ramp rate of ca. 10 °C/min, then held for 3 h. The product was characterized by electron microscopy performed on the Thermo Scientific Talos F200X described

Surface-enhanced Raman scattering of water in aqueous dispersions of silver nanoparticles

• Paulina Filipczak,
• Krzysztof Hałagan,
• Jacek Ulański and
• Marcin Kozanecki

Beilstein J. Nanotechnol. 2021, 12, 497–506, doi:10.3762/bjnano.12.40

• -resolution transmission electron microscopy (TEM) analysis was performed to estimate the size and identify the shape of the nanoparticles (see Figure 1). The nanoparticles in the AgNPs blue sample had a triangular prism shape with an estimated average size of 34 ± 14 nm, while in the AgNPs yellow sample, the

Boosting of photocatalytic hydrogen evolution via chlorine doping of polymeric carbon nitride

• Malgorzata Aleksandrzak,
• Michalina Kijaczko,
• Wojciech Kukulka,
• Daria Baranowska,
• Martyna Baca,
• Beata Zielinska and
• Ewa Mijowska

Beilstein J. Nanotechnol. 2021, 12, 473–484, doi:10.3762/bjnano.12.38

• the morphology of the prepared materials, presented in Figure 1, was performed by transmission electron microscopy (TEM). The images of pristine PCN demonstrate the layered structure with a tendency to fold and aggregate. They also show several stacking layers, indicating the planar graphitic-like

• Ar as a carrier). Each catalyst was tested for 3 h. Every hour, 100 µL of gas was withdrawn from the reactor and injected into the gas chromatograph to measure the amount of H2 evolved. TEM images of PCN (a, b) and Cl-PCN (c, d). Scanning transmission electron microscopy image of Cl-PCN (e) and

Rapid controlled synthesis of gold–platinum nanorods with excellent photothermal properties under 808 nm excitation

• Jialin Wang,
• Qianqian Duan,
• Min Yang,
• Boye Zhang,
• Li Guo,
• Pengcui Li,
• Wendong Zhang and
• Shengbo Sang

Beilstein J. Nanotechnol. 2021, 12, 462–472, doi:10.3762/bjnano.12.37

• in all experiments. Instruments The absorption spectra were measured on a UV–vis–NIR spectrophotometer (UV-8000A, 190–1200 nm, Metash, China). Transmission electron microscopy (TEM) images, morphology, and size of nanoparticles were obtained with a transmission electron microscope (JEOL 2100F, 200 kV

A review on nanostructured silver as a basic ingredient in medicine: physicochemical parameters and characterization

• Gabriel M. Misirli,
• Kishore Sridharan and
• Shirley M. P. Abrantes

Beilstein J. Nanotechnol. 2021, 12, 440–461, doi:10.3762/bjnano.12.36

• experimentally analyzed by UV–vis extinction spectra and transmission electron microscopy (TEM). The rate of photo-oxidation in spherical AgNPs was homogeneous and surprisingly inhomogeneous in the case of cubic AgNPs, which was attributed to the difference in morphology. The noticeable formation of small NPs

• interactions with cells and living organisms. Multidisciplinary teams are essential to pave the way for the future use of AgNPs in living beings. Scanning electron microscope (SEM) with different morphologies: (A) bipyramidal, (B) nanowires, (C) nanocubes and transmission electron microscopy (TEM) micrographs

Solution combustion synthesis of a nanometer-scale Co₃O₄ anode material for Li-ion batteries

• Monika Michalska,
• Huajun Xu,
• Qingmin Shan,
• Shiqiang Zhang,
• Yohan Dall'Agnese,
• Yu Gao,
• Amrita Jain and
• Marcin Krajewski

Beilstein J. Nanotechnol. 2021, 12, 424–431, doi:10.3762/bjnano.12.34

• the Raman spectrometer as well as Mr. Ryszard Strzałkowski from the Institute of Fundamental Technological Research Polish Academy of Sciences for his support in the performance of transmission electron microscopy investigations.

A stretchable triboelectric nanogenerator made of silver-coated glass microspheres for human motion energy harvesting and self-powered sensing applications

• Hui Li,
• Yaju Zhang,
• Yonghui Wu,
• Hui Zhao,
• Weichao Wang,
• Xu He and
• Haiwu Zheng

Beilstein J. Nanotechnol. 2021, 12, 402–412, doi:10.3762/bjnano.12.32

• layer of silicone rubber and the middle layer of SCGMs. The scanning electron microscopy (SEM) image (Figure 1b) and the energy dispersive X-ray spectroscopy (EDS) measurement (Figure 1c) show that the SCGMs are evenly dispersed across the silicone rubber. Figure 1d presents the flow chart for the

Spontaneous shape transition of Mn_xGe_1−x islands to long nanowires

• S. Javad Rezvani,
• Luc Favre,
• Gabriele Giuli,
• Yiming Wubulikasimu,
• Isabelle Berbezier,
• Augusto Marcelli,
• Luca Boarino and
• Nicola Pinto

Beilstein J. Nanotechnol. 2021, 12, 366–374, doi:10.3762/bjnano.12.30

• report a spontaneous morphology modification, from islands to nanowires, in Mn-rich GeMn nanoparticles. The growth is initiated via reaction of a thin Mn wetting layer, evaporated by MBE, with a Ge(111) substrate. Morphology and microstructure of the NWs have been studied by scanning electron microscopy

• (SEM), X-ray diffraction (XRD), and high-resolution transmission electron microscopy (HRTEM). We demonstrate that the thickness of the Mn layer and the annealing conditions finely control the shape transition, resulting in NWs up to ≃1.5 μm length with uniform width and homogeneous composition

Structural and optical characteristics determined by the sputtering deposition conditions of oxide thin films

• Petronela Prepelita,
• Florin Garoi and
• Valentin Craciun

Beilstein J. Nanotechnol. 2021, 12, 354–365, doi:10.3762/bjnano.12.29

• diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), while the surface topography of the samples was analyzed using scanning electron microscopy (SEM). The optical characteristics were measured for samples with the same composition but obtained with different deposition parameters, such as increasing

Nickel nanoparticle-decorated reduced graphene oxide/WO₃ nanocomposite – a promising candidate for gas sensing

• Ilka Simon,
• Alexandr Savitsky,
• Rolf Mülhaupt,
• Vladimir Pankov and
• Christoph Janiak

Beilstein J. Nanotechnol. 2021, 12, 343–353, doi:10.3762/bjnano.12.28

• diluted 1:100. Transmission electron microscopy, TEM was performed with a FEI Tecnai G2 F20 electron microscope [68] operated at 200 kV accelerating voltage or FEI Titan 80-300 TEM operated at 300 kV accelerating voltage [69]. Conventional TEM images were recorded with a Gatan UltraScan 1000P detector

Exploring the fabrication and transfer mechanism of metallic nanostructures on carbon nanomembranes via focused electron beam induced processing

• Christian Preischl,
• Linh Hoang Le,
• Elif Bilgilisoy,
• Armin Gölzhäuser and
• Hubertus Marbach

Beilstein J. Nanotechnol. 2021, 12, 319–329, doi:10.3762/bjnano.12.26

• performed in a commercial UHV system (Multiscanlab, Omicron Nanotechnology, Germany) with a base pressure of p < 2 × 10−10 mbar. The main component of the system is a UHV-compatible electron column (Leo Gemini) for scanning electron microscopy (SEM, nominal resolution better than 3 nm) and a local AES using

Characterization, bio-uptake and toxicity of polymer-coated silver nanoparticles and their interaction with human peripheral blood mononuclear cells

• Sahar Pourhoseini,
• Reilly T. Enos,
• Angela E. Murphy,
• Bo Cai and
• Jamie R. Lead

Beilstein J. Nanotechnol. 2021, 12, 282–294, doi:10.3762/bjnano.12.23

• pristine AgNPs, including dynamic light scattering (DLS), UV–vis spectroscopy (UV–vis), transmission electron microscopy (TEM), and inductively coupled plasma mass spectrometry (ICP-MS). DLS gave a Z-average hydrodynamic size of 33.7 ± 0.7 nm (mean ± standard deviation) and a PDI (polydispersity index) of

• hydration shell around NPs and should be the same as, or larger than, the core size of NPs measured by TEM. Characterization values for pristine PVP-AgNPs can be found in Table 1. Scanning transmission electron microscopy (STEM) images of 1000 µg·L−1 PVP-AgNPs in RPMI medium at the beginning of the

• tables. Acknowledgements We would like to thank the Clemson University Electron Microscopy Facility for STEM imaging. We are also grateful to Kandy Velázquez for helpful discussions throughout this project. Funding We thank the Smartstate Center for Environmental Nanoscience and Risk (CENR), the NSF