Room temperature, ppb-level NO₂ gas sensing of multiple-networked ZnSe nanowire sensors under UV illumination

• Sunghoon Park,
• Soohyun Kim,
• Wan In Lee,
• Kyoung-Kook Kim and
• Chongmu Lee

Beilstein J. Nanotechnol. 2014, 5, 1836–1841, doi:10.3762/bjnano.5.194

• ) modulation of the depletion layer width and (2) the UV-activated adsorption, and desorption of NO2 species. Experimental Synthesis of ZnSe nanowires Similar to that previously described [31], ZnSe nanowires were synthesized on 3 nm-thick gold (Au) layer-coated, c-plane sapphire (Al2O3(0001)) substrates by

Mimicking exposures to acute and lifetime concentrations of inhaled silver nanoparticles by two different in vitro approaches

• Fabian Herzog,
• Kateryna Loza,
• Sandor Balog,
• Martin J. D. Clift,
• Matthias Epple,
• Peter Gehr,
• Alke Petri-Fink and
• Barbara Rothen-Rutishauser

Beilstein J. Nanotechnol. 2014, 5, 1357–1370, doi:10.3762/bjnano.5.149

• effects of zinc oxide [41], gold (Au) [42][43] and Ag NPs as well as Ag ions [44] have been evaluated. The aim of the present study was therefore to use a recently established system [44] to assess the effects of Ag NPs and Ag+ on the 3D lung model. Compared to the citrate-coated Ag NPs in the previous

• exposures are less expensive, easier and quicker to perform than animal studies. In previous studies we have employed ALI exposures to investigate the toxic potential of various materials such as diesel car and scooter exhaust gases [58][59], zinc oxide [41], cerium oxide [60], gold (Au) [42] and silver [44

Scale effects of nanomechanical properties and deformation behavior of Au nanoparticle and thin film using depth sensing nanoindentation

• Dave Maharaj and
• Bharat Bhushan

Beilstein J. Nanotechnol. 2014, 5, 822–836, doi:10.3762/bjnano.5.94

• . Repeated compression tests of nanoparticles were performed that showed a strain hardening effect and increased pop-ins during subsequent loads. Keywords: gold (Au); Hall–Petch; hardness; nanoindentation; nano-objects; Introduction The characterization of mechanical properties is crucial for a fundamental

Hole-mask colloidal nanolithography combined with tilted-angle-rotation evaporation: A versatile method for fabrication of low-cost and large-area complex plasmonic nanostructures and metamaterials

• Jun Zhao,
• Bettina Frank,
• Frank Neubrech,
• Chunjie Zhang,
• Paul V. Braun and
• Harald Giessen

Beilstein J. Nanotechnol. 2014, 5, 577–586, doi:10.3762/bjnano.5.68

• about 98 °C for around 3 min to fix the PS spheres on the polymer film. After drying the sample with nitrogen, the PMMA layer is now covered with well separated and randomly arranged PS spheres. Subsequently, a thin film consisting of 5 nm chromium (Cr) and 20 nm gold (Au) is evaporated on top of the

Highly efficient ZnO/Au Schottky barrier dye-sensitized solar cells: Role of gold nanoparticles on the charge-transfer process

• Tanujjal Bora,
• Htet H. Kyaw,
• Soumik Sarkar,
• Samir K. Pal and
• Joydeep Dutta

Beilstein J. Nanotechnol. 2011, 2, 681–690, doi:10.3762/bjnano.2.73

• for Basic Sciences, Sector - III, Block - JD, Salt Lake, Kolkata 700098, India 10.3762/bjnano.2.73 Abstract Zinc oxide (ZnO) nanorods decorated with gold (Au) nanoparticles have been synthesized and used to fabricate dye-sensitized solar cells (DSSC). The picosecond-resolved, time-correlated single