Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

• Viet Van Pham,
• Hong-Huy Tran,
• Thao Kim Truong and
• Thi Minh Cao

Beilstein J. Nanotechnol. 2022, 13, 96–113, doi:10.3762/bjnano.13.7

• , hydrothermal, and microwave synthesis [49][50][51]. The formation and concentration of OVs depend on particle size, synthesizing temperature, and morphology of SnO2. The OVs play the role of an electron donor and provide free electrons, making SnO2 an n-type semiconductor [52]. Guoliang Xu et al. indicated

• , nanobelts, and nanotubes. These morphologies can be controllably obtained by using polyvinylpyrrolidone (PVP), sodium dodecyl sulfonate (SDS), cetyl trimethyl ammonium bromide (CTAB), or tetrapropyl ammonium bromide (TPAB) as surfactants in a hydrothermal method [56][57][58][59]. The difference of

• al. on using Ag@SnO2 NPs for removing NO, taking advantage of plasmonic-induced photocatalysis [72]. The Ag@SnO2 NPs were fabricated by a simple and green approach using hydrothermal growth and photoreduction deposition. The introduction of Ag induced a bending of the band structure of SnO2 NPs

Morphology-driven gas sensing by fabricated fractals: A review

• Vishal Kamathe and
• Rupali Nagar

Beilstein J. Nanotechnol. 2021, 12, 1187–1208, doi:10.3762/bjnano.12.88

• to some excellent articles on hierarchical gas sensors that address such geometries [8][30][33][37]. Tin oxide-based fractals Yin et al. reported SnO2 nanoparticles with and without platinum (Pt) decoration synthesized using a sol–gel hydrothermal technique for gas sensing applications [63]. Figure

• had minimum influence. Thus, better interaction between NO2 and the sensor surface was achieved. The SnO2 DNWs were estimated to have a fractal dimension of 1.82. In 2017, Zang et al. fabricated SnO2 leaf-like hierarchical structures by hydrothermal synthesis [67]. Figure 7a–f shows SEM images of SnO2

• structures were estimated to have D values in the range of 1.19–1.61. In a similar study, Liu et al. reported on flower-like ZnO hierarchical superstructures synthesized using urea through a low-temperature hydrothermal technique [76]. The obtained 3D flower-like ZnO structures had highly dendritic

Self-assembly of amino acids toward functional biomaterials

• Huan Ren,
• Lifang Wu,
• Lina Tan,
• Yanni Bao,
• Yuchen Ma,
• Yong Jin and
• Qianli Zou

Beilstein J. Nanotechnol. 2021, 12, 1140–1150, doi:10.3762/bjnano.12.85

• alcohol dehydrogenase may be incorporated into Cys microspheres, resulting in hybrid microspheres with photocatalytic and biocatalytic activities. In addition, Cys/Zn microspheres were modified with CO32−-doped ZnS nanocrystals by a hydrothermal treatment, and then glutamic acid dehydrogenase was

Revealing the formation mechanism and band gap tuning of Sb₂S₃ nanoparticles

• Maximilian Joschko,
• Franck Yvan Fotue Wafo,
• Christina Malsi,
• Danilo Kisić,
• Ivana Validžić and
• Christina Graf

Beilstein J. Nanotechnol. 2021, 12, 1021–1033, doi:10.3762/bjnano.12.76

• -black, crystalline form, known as the mineral stibnite [7][8]. Sb2S3 nanomaterials with a diverse morphology and a broad distribution of band gap values were synthesized by solvothermal [9], hydrothermal [10], and sonochemical [11] approaches, as well as by chemical bath [12] and chemical vapor

Comprehensive review on ultrasound-responsive theranostic nanomaterials: mechanisms, structures and medical applications

• Sepand Tehrani Fateh,
• Lida Moradi,
• Elmira Kohan,
• Michael R. Hamblin and
• Amin Shiralizadeh Dezfuli

Beilstein J. Nanotechnol. 2021, 12, 808–862, doi:10.3762/bjnano.12.64

9.1% efficient zinc oxide/silicon solar cells on a 50 μm thick Si absorber

• Rafal Pietruszka,
• Bartlomiej S. Witkowski,
• Monika Ozga,
• Katarzyna Gwozdz,
• Ewa Placzek-Popko and
• Marek Godlewski

Beilstein J. Nanotechnol. 2021, 12, 766–774, doi:10.3762/bjnano.12.60

• % for planar structures, respectively. The work, therefore, describes an environmentally friendly technology for PV architecture with surface textures increasing the efficiency of PV cells. Keywords: atomic layer deposition; hydrothermal method; photovoltaics; silicon; solar cell; zinc oxide

• (ZnONR) were grown via a hydrothermal method (HT) to create a rough surface morphology. Sample B was placed into the ALD growth chamber without modification of the surface morphology. During HT growth, sample B was kept under nitrogen atmosphere. After the HT process, both samples were transferred to the

• ALD reactor. Hydrothermal growth Sample A was placed into the ALD growth chamber to deposit nanoseeds of ZnO. Nanoseeds were obtained by repeating the ALD cycle for 13 times (see below in Table 1). The temperature was set to 100 °C. In the process, diethylzinc (DEZ, CAS Number 557-20-0) and deionized

High-yield synthesis of silver nanowires for transparent conducting PET films

• Gul Naz,
• Hafsa Asghar,
• Muhammad Ramzan,
• Muhammad Arshad,
• Rashid Ahmed,
• Muhammad Bilal Tahir,
• Bakhtiar Ul Haq,
• Nadeem Baig and
• Junaid Jalil

Beilstein J. Nanotechnol. 2021, 12, 624–632, doi:10.3762/bjnano.12.51

• effective synthetic method is still needed for high yields of impurity-free AgNWs. In order to synthesize silver nanowires several methods have been successfully developed, including ultraviolet irradiation, salt-free solution-based, salt-mediated solution-based, photo reduction, hydrothermal, wet-chemical

The preparation temperature influences the physicochemical nature and activity of nanoceria

• Robert A. Yokel,
• Wendel Wohlleben,
• Johannes Georg Keller,
• Matthew L. Hancock,
• Jason M. Unrine,
• D. Allan Butterfield and
• Eric A. Grulke

Beilstein J. Nanotechnol. 2021, 12, 525–540, doi:10.3762/bjnano.12.43

• Research Centre Institute for Health and Consumer Protection repository of reference materials from the OECD sponsorship program. The solvothermally synthesized nanoceria material was prepared using a hydrothermal method [34]. Briefly, 0.25 M cerium chloride heptahydrate and 0.25 M citric acid monohydrate

Solution combustion synthesis of a nanometer-scale Co₃O₄ anode material for Li-ion batteries

• Monika Michalska,
• Huajun Xu,
• Qingmin Shan,
• Shiqiang Zhang,
• Yohan Dall'Agnese,
• Yu Gao,
• Amrita Jain and
• Marcin Krajewski

Beilstein J. Nanotechnol. 2021, 12, 424–431, doi:10.3762/bjnano.12.34

• been proposed including sol–gel methods [4][6][13][14][15], sol–electrospinning techniques [16][17][18][19], hydrothermal and solvothermal syntheses [20][21][22][23][24][25][26][27][28], precipitation and co-precipitation [29][30][31], chemical thermal decomposition and pyrolysis [32][33][34][35][36

A review on the green and sustainable synthesis of silver nanoparticles and one-dimensional silver nanostructures

• Sina Kaabipour and
• Shohreh Hemmati

Beilstein J. Nanotechnol. 2021, 12, 102–136, doi:10.3762/bjnano.12.9

• with various combinations (i.e. hybrid compounds), allowing the process to be adjusted accordingly in order to yield the desired complex product with tuned physiochemical characteristics [146]. In addition, combined with the hydrothermal approach (synthesis in a hot aqueous environment under high

Bulk chemical composition contrast from attractive forces in AFM force spectroscopy

• Dorothee Silbernagl,
• Media Ghasem Zadeh Khorasani,
• Natalia Cano Murillo,
• Anna Maria Elert and
• Heinz Sturm

Beilstein J. Nanotechnol. 2021, 12, 58–71, doi:10.3762/bjnano.12.5

• different sources was used. For the second sample, boehmite was hydrothermally synthesized from elementary Al. The hydrothermal route is described elsewhere [16][37]. For the third sample, commercially available boehmite NP (HP14, Sasol) with an average primary size of 20 nm was acquired. The boehmite NP

ZnO and MXenes as electrode materials for supercapacitor devices

• Ameen Uddin Ammar,
• Ipek Deniz Yildirim,
• Feray Bakan and
• Emre Erdem

Beilstein J. Nanotechnol. 2021, 12, 49–57, doi:10.3762/bjnano.12.4

• specific capacitance of the resultant composites was twice as high as that of Co(OH)2 nanosheets [17]. Liu et al. synthesized a MXene/nickel sulfide (NiS) nanocomposite using a basic hydrothermal technique and measured a specific capacitance of 857.8 F·g−1. NiS has advantages such as good conductivity and

• increased capacitance of 226 F·g−1 at 1 A·g-1 [22]. Xia et al. used a Ti3C2Tx MXene electrode decorated with nickel oxide (NiO) nanosheets. The electrode was synthesized via a hydrothermal method. The electrode used in a supercapacitor showed an excellent specific capacitance of 80 F·g−1 and an energy

Unravelling the interfacial interaction in mesoporous SiO₂@nickel phyllosilicate/TiO₂ core–shell nanostructures for photocatalytic activity

• Bridget K. Mutuma,
• Xiluva Mathebula,
• Isaac Nongwe,
• Bonakele P. Mtolo,
• Boitumelo J. Matsoso,
• Rudolph Erasmus,
• Zikhona Tetana and
• Neil J. Coville

Beilstein J. Nanotechnol. 2020, 11, 1834–1846, doi:10.3762/bjnano.11.165

• phyllosilicate can be obtained either by a hydrothermal method or a deposition-precipitation method, the 2:1 nickel phyllosilicate is only formed under hydrothermal conditions [32][33][34]. Recently, several researchers have reported on the generation of nickel phyllosilicate catalysts for hydrogenation

• reactions, methane reforming, and hydrogen evolution [35][36][37][38][39][40]. Wang et al. [38] reported the growth of nickel phyllosilicate by simultaneous reaction of a silica precursor (tetraethylorthosilicate), nickel chloride, water, and urea in a hydrothermal reactor at 210 °C for 12 h. They obtained

• obtained via a hydrothermal treatment method using solid SiO2 spheres, urea, and nickel nitrate hexahydrate. Although NiPS compounds are extensively used as catalysts, to our knowledge, reports on the use of core–shell based nickel–phyllosilicate composites in dye photodegradation are yet to be reported

Self-standing heterostructured NiC_x-NiFe-NC/biochar as a highly efficient cathode for lithium–oxygen batteries

• Shengyu Jing,
• Xu Gong,
• Shan Ji,
• Linhui Jia,
• Bruno G. Pollet,
• Sheng Yan and
• Huagen Liang

Beilstein J. Nanotechnol. 2020, 11, 1809–1821, doi:10.3762/bjnano.11.163

• [26]. For instance, molybdenum/tungsten carbide with a well-defined nanostructure was synthesized via a hydrothermal method, and the obtained metal carbide catalyst yielded a high capacity in lithium–oxygen batteries [15]. Also, titanium carbide was synthesized by Bruce et al. as cathode material for

• the previous literatures [40][41][42]. However, a hydrothermal process was introduced here as a new treatment step prior to the precursor calcination in order to modify the properties of the prepared electrode materials. Heterostructured NiCx-NiFe-NC derived from bimetallic Prussian blue supported on

• structure. As shown in the inset of Figure 2d, the main diffraction peaks of the Ni–Fe PBA precursor are consistent with the standard patterns of Ni3[Fe(CN)6]2 (JCPDS: 51-1897). During a hydrothermal pretreatment, the ion-exchange reaction of OH−/[Fe(CN)6]3− occurred at the interface between NiFe-PBA cubes

A self-powered, flexible ultra-thin Si/ZnO nanowire photodetector as full-spectrum optical sensor and pyroelectric nanogenerator

• Liang Chen,
• Jianqi Dong,
• Miao He and
• Xingfu Wang

Beilstein J. Nanotechnol. 2020, 11, 1623–1630, doi:10.3762/bjnano.11.145

• deposited onto 45 μm p-Si by radio frequency (RF) magnetron sputtering. Next, the sample was placed into a solution of 0.877 g hexamethylenetetramine, 1.372 g Zn(CH3COO)2, and 13 mL ammonium hydroxide to grow ZnO NWs for half an hour via a hydrothermal method in a mechanical convection oven at 90 °C

High-responsivity hybrid α-Ag₂S/Si photodetector prepared by pulsed laser ablation in liquid

• Raid A. Ismail,
• Hanan A. Rawdhan and
• Duha S. Ahmed

Beilstein J. Nanotechnol. 2020, 11, 1596–1607, doi:10.3762/bjnano.11.142

• hydrothermal methods, chemical bath deposition, laser ablation in liquid reverse microemulsion, electrospinning, sol–gel, electrochemical method, template method, sonochemical method, and hydrochemical bath deposition [10][11][12][13]. The size of Ag2S NPs depends on the preparation conditions [14]. Ag2S NPs

• bromide (CTAB) surfactant-assisted hydrothermal method [15]. Zhang et al. synthesized monodisperse Ag2S NPs using thermolysis of harmless silver xanthates as a single-source molecular precursor and controlled the particle size by changing the alkyl chain length in the precursors [16]. Recently, Kang et al

Antimicrobial metal-based nanoparticles: a review on their synthesis, types and antimicrobial action

• Matías Guerrero Correa,
• Fernanda B. Martínez,
• Cristian Patiño Vidal,
• Camilo Streitt,
• Juan Escrig and
• Carol Lopez de Dicastillo

Beilstein J. Nanotechnol. 2020, 11, 1450–1469, doi:10.3762/bjnano.11.129

• , chemical vapor deposition, electrochemical anodization method, hydrolysis, hydrothermal method, precipitation–hydrothermal method, reverse micellar route, sol–gel method, solution-based synthesis, solvothermal synthesis, and the sonochemical method. The most relevant ones, along with the typical resulting

• temperature well above their boiling point, facilitating the interaction of the precursors during synthesis. Some examples are Y2O3 [58] and ZnO [59] nanoparticles with different morphologies and sizes. When water is used as the solvent, the method is called the hydrothermal technique, which is an easy and

One-step synthesis of carbon-supported electrocatalysts

• Sebastian Tigges,
• Nicolas Wöhrl,
• Ivan Radev,
• Ulrich Hagemann,
• Markus Heidelmann,
• Thai Binh Nguyen,
• Stanislav Gorelkov,
• Stephan Schulz and
• Axel Lorke

Beilstein J. Nanotechnol. 2020, 11, 1419–1431, doi:10.3762/bjnano.11.126

• as solvothermal and hydrothermal synthesis [9]. In these processes, long ultrasonication as well as reduction/heating procedures are required [6][10], both of which will impede industrial production. In contrast, physical approaches for the synthesis of electrocatalysts (such as plasma-assisted

Magnetic-field-assisted synthesis of anisotropic iron oxide particles: Effect of pH

• Andrey V. Shibaev,
• Petr V. Shvets,
• Darya E. Kessel,
• Roman A. Kamyshinsky,
• Anton S. Orekhov,
• Sergey S. Abramchuk,
• Alexei R. Khokhlov and
• Olga E. Philippova

Beilstein J. Nanotechnol. 2020, 11, 1230–1241, doi:10.3762/bjnano.11.107

• ][30][31][32], solvothermal [33] and hydrothermal [34] reactions, the polyol method [35], dehydration or reduction of precursor rod-like particles [8][11], sonochemical oxidation [36], thermal decomposition [23][26], sol–gel reactions [37], synthesis in worm-like surfactant micellar solutions [38][39

Gas sorption porosimetry for the evaluation of hard carbons as anodes for Li- and Na-ion batteries

• Yuko Matsukawa,
• Fabian Linsenmann,
• Maximilian A. Plass,
• George Hasegawa,
• Katsuro Hayashi and
• Tim-Patrick Fellinger

Beilstein J. Nanotechnol. 2020, 11, 1217–1229, doi:10.3762/bjnano.11.106

• originating from adsorption inside micropores. Herein, two different types of HCs prepared with different procedures are compared regarding their morphological characteristics as well as their electrochemical properties. Six samples were prepared via hydrothermal carbonization (HT) followed by pyrolytic

• the hydrothermal carbonization of saccharides [30][31]. Despite the slightly different preparation protocols, morphological differences between the hydrothermally obtained HCs are not significant (Figure 1). The two RF carbon samples showed well-defined monolithic macrostructures obtained by spinodal

• by the secondary catalytic effect of borax during the hydrothermal carbonization of sugars [32]. Gas sorption porosimetry of hard carbons N2 sorption porosimetry of the HT samples turned out to be problematic, since the equilibrium conditions were not reached (exemplarily shown in Supporting

Influence of the magnetic nanoparticle coating on the magnetic relaxation time

• Mihaela Osaci and
• Matteo Cacciola

Beilstein J. Nanotechnol. 2020, 11, 1207–1216, doi:10.3762/bjnano.11.105

• additional step in which the hydrothermal method or thermal decomposition technique are used. The method used to obtain nanoparticles by thermal decomposition of an iron precursor in the presence of NaBH4 in a polyol was found to be suitable for size control in both chemical approaches [1][2][3][4][6]. Since

High permittivity, breakdown strength, and energy storage density of polythiophene-encapsulated BaTiO₃ nanoparticles

• Adnanullah Khan,
• Amir Habib and
• Adeel Afzal

Beilstein J. Nanotechnol. 2020, 11, 1190–1197, doi:10.3762/bjnano.11.103

• dioxide (TiO2 Tronox, 99.5%, Tronox Pigments GmbH) are used as Ba and Ti precursors for the hydrothermal synthesis of BTO nanoparticles. Ba(OH)2·8H2O also acts as the mineralizer and prevents the use of NaOH or KOH for controlling the pH value of the reaction mixture [12]. Equimolar amounts of Ba and Ti

• precursors are added to the double-distilled water in a PTFE-lined pressure vessel. The hydrothermal reaction is carried out in an autoclave (Berghof Instruments GmbH) at 120 °C and autogenous pressure for 24 h under stirring. The product is washed with dilute formic acid solution and double-distilled water

Gram-scale synthesis of splat-shaped Ag–TiO₂ nanocomposites for enhanced antimicrobial properties

• Mohammad Jaber,
• Asim Mushtaq,
• Kebiao Zhang,
• Jindan Wu,
• Dandan Luo,
• Zihan Yi,
• M. Zubair Iqbal and
• Xiangdong Kong

Beilstein J. Nanotechnol. 2020, 11, 1119–1125, doi:10.3762/bjnano.11.96

• , magnetron sputtering, molecular precursor techniques and photo-deposition techniques have been applied to the preparation of nanocomposites [6][21][22]. However, these techniques are very sophisticated and not optimized for synthesis on a large scale. Herein, a simple hydrothermal process was employed to

• activity of the as-prepared nanocomposites was investigated against Gram-positive S. aureus and Gram-negative E. coli. Experimental Synthesis of the Ag–TiO2 nanocomposite A hydrothermal method was used to prepare the Ag–TiO2 nanocomposite on a gram-scale. 1.25 mol/L of a 16.0 mL titanium sulfate solution

• addition to Ag and TiO2, indicating that the formation of the Ag–TiO2 nanocomposite was comparable to previously reported studies. The synthesis of the TiO2 and Ag–TiO2 nanocomposites using the polyvinylpyrrolidone (PVP)-assisted hydrothermal method is illustrated in Scheme 1. In the growth process, the

Gas-sensing features of nanostructured tellurium thin films

• Dumitru Tsiulyanu

Beilstein J. Nanotechnol. 2020, 11, 1010–1018, doi:10.3762/bjnano.11.85

• grow Te nanoflakes. In order to synthesize Te nanowires, Liang and collaborators [13] performed chemical reactions of Na2TeO3, in aqueous solution, via hydrothermal treatment, whereas Ma and colleagues [14] used a solvothermal approach on glass substrates. To synthesize Te nanotubes, techniques such as

• hydrothermal recrystallization [23]. The response time range of NH3 gas sensors based on such nanocomponents was 5–18 s but the recovery time ranged between 170–720 s. From comparison with state-of-the-art devices, it can be observed that the physically nanostructured Te thin films exhibit great potential for

• applications in development in advanced gas sensors and, so far, are the only Te-based nanostructured sensors tested with this purpose. Besides, it can also be observed that nanostructuring is mostly performed via phase transformations, such as hydrothermal recrystallization and growth of Te nanocrystals

Band tail state related photoluminescence and photoresponse of ZnMgO solid solution nanostructured films

• Vadim Morari,
• Aida Pantazi,
• Nicolai Curmei,
• Vitalie Postolache,
• Emil V. Rusu,
• Marius Enachescu,
• Ion M. Tiginyanu and
• Veaceslav V. Ursaki

Beilstein J. Nanotechnol. 2020, 11, 899–910, doi:10.3762/bjnano.11.75

• (MOCVD) [18][19], hydrothermal [4], chemical bath deposition (CBD) [20], sol–gel spin coating [21][22][23][24][25][26][27][28][29], and spray pyrolysis [28][29][30][31][32][33][34]. Among these techniques, the sol–gel spin coating method has the advantage of ensuring easy control and handling of