Tunable light filtering by a Bragg mirror/heavily doped semiconducting nanocrystal composite

• Ilka Kriegel and
• Francesco Scotognella

Beilstein J. Nanotechnol. 2015, 6, 193–200, doi:10.3762/bjnano.6.18

• near infrared (vis–NIR) spectral region when employing varying carrier densities. As the tunable component, we implemented a dispersion of copper selenide (Cu2−xSe) NCs and a film of indium tin oxide (ITO) NCs, which are known to show optical tunablility with chemical or electrochemical treatments. We

Intake of silica nanoparticles by giant lipid vesicles: influence of particle size and thermodynamic membrane state

• Florian G. Strobl,
• Florian Seitz,
• Christoph Westerhausen,
• Armin Reller,
• Adriano A. Torrano,
• Christoph Bräuchle,
• Achim Wixforth and
• Matthias F. Schneider

Beilstein J. Nanotechnol. 2014, 5, 2468–2478, doi:10.3762/bjnano.5.256

• Angelova et al. [55]. In short, lipids in the desired ratio and 0.05 mol % of the fluorescent marker DiOC14 were mixed in chloroform and spread onto indium tin oxide (ITO)-coated glass slides. The solvent is thoroughly removed through vacuum evaporation. For the swelling procedure, a chamber was assembled

Characterization of 10,12-pentacosadiynoic acid Langmuir–Blodgett monolayers and their use in metal–insulator–metal tunnel devices

• Saumya Sharma,
• Mohamad Khawaja,
• Manoj K. Ram,
• D. Yogi Goswami and
• Elias Stefanakos

Beilstein J. Nanotechnol. 2014, 5, 2240–2247, doi:10.3762/bjnano.5.233

• , indium tin oxide (ITO) glass, quartz and nickel substrates for optical spectroscopy, cyclic voltammetry and electrical measurements [12][13][14][15]. The optical and electrochemical properties of the films were investigated using FTIR and cyclic voltammetric studies, respectively. The electrochemical

Hybrid spin-crossover nanostructures

• Carlos M. Quintero,
• Gautier Félix,
• Iurii Suleimanov,
• José Sánchez Costa,
• Gábor Molnár,
• Lionel Salmon,
• William Nicolazzi and
• Azzedine Bousseksou

Beilstein J. Nanotechnol. 2014, 5, 2230–2239, doi:10.3762/bjnano.5.232

• light emitting thin film composed of chlorophyll a (Chl a) mixed with the SCO complex [Fe(dpp)2](BF)4 (dpp = 2,6-di(pyrazol-1-yl)pyridine) spin-coated on an indium tin oxide (ITO) substrate (anode) and then covered by a 30 nm thick Al cathode (see Figure 6a) [28]. With this configuration, the

Biopolymer colloids for controlling and templating inorganic synthesis

• Laura C. Preiss,
• Katharina Landfester and
• Rafael Muñoz-Espí

Beilstein J. Nanotechnol. 2014, 5, 2129–2138, doi:10.3762/bjnano.5.222

• templates for the growth of conductive indium tin oxide (ITO) nanoparticles [67]. C2. Biopolymers as “scaffolds”: As mentioned above, gelling biopolymers are very common templates in inorganic syntheses [3][68]. Since the precipitation/crystallization of the inorganic nanoparticles takes place within the

Properties of plasmonic arrays produced by pulsed-laser nanostructuring of thin Au films

• Katarzyna Grochowska,
• Katarzyna Siuzdak,
• Peter A. Atanasov,
• Carla Bittencourt,
• Anna Dikovska,
• Nikolay N. Nedyalkov and
• Gerard Śliwiński

Beilstein J. Nanotechnol. 2014, 5, 2102–2112, doi:10.3762/bjnano.5.219

• theory with the temperature gradients both lateral and normal to the film surface taken into account [8][9][10]. The gold nanoparticles produced from thin Au films on Si and indium tin oxide (ITO) substrates using a 532 nm laser operated in a single-pulse regime were studied in detail by Ruffino et al

Photodetectors based on carbon nanotubes deposited by using a spray technique on semi-insulating gallium arsenide

• Domenico Melisi,
• Maria Angela Nitti,
• Marco Valentini,
• Antonio Valentini,
• Teresa Ligonzo,
• Giuseppe De Pascali and
• Marianna Ambrico

Beilstein J. Nanotechnol. 2014, 5, 1999–2006, doi:10.3762/bjnano.5.208

• gallium arsenide. After the spray process, in the SFS device configuration, an interdigitated 50 nm thick indium tin oxide (ITO) film was deposited from an ITO target on CNTs by means of IBS. An ITO/GaAs/Ti/Au device was also prepared as control sample. Transmission electron microscopy (FEI Tecnai G2

Donor–acceptor graphene-based hybrid materials facilitating photo-induced electron-transfer reactions

• Anastasios Stergiou,
• Georgia Pagona and
• Nikos Tagmatarchis

Beilstein J. Nanotechnol. 2014, 5, 1580–1589, doi:10.3762/bjnano.5.170

• about the electronic communication between the chromophore moiety and rGO, which lead to the fabrication of photoelectrochemical cells. The photo-induced electron-transfer properties of ZnP–rGO and RuP–rGO were evaluated by examining the photocurrent responses in thin films on indium tin oxide (ITO). In

Model systems for studying cell adhesion and biomimetic actin networks

• Dorothea Brüggemann,
• Johannes P. Frohnmayer and
• Joachim P. Spatz

Beilstein J. Nanotechnol. 2014, 5, 1193–1202, doi:10.3762/bjnano.5.131

• bilayers, which are only 4 nm thick [46]. For the preparation of GUVs several methods exist, amongst which are electroformation on platinum wires or indium tin oxide (ITO) electrodes as well as spontaneous swelling. The specifics of GUVs, their detailed preparation methods and wide ranging applications are

Photovoltaic properties of ZnO nanorods/p-type Si heterojunction structures

• Rafal Pietruszka,
• Bartlomiej S. Witkowski,
• Grzegorz Luka,
• Lukasz Wachnicki,
• Sylwia Gieraltowska,
• Krzysztof Kopalko,
• Eunika Zielony,
• Piotr Bieganski,
• Ewa Placzek-Popko and
• Marek Godlewski

Beilstein J. Nanotechnol. 2014, 5, 173–179, doi:10.3762/bjnano.5.17

• used to store data for a long period of time [21]. In PV structures, ZnO can replace the commonly used indium tin oxide (ITO) as a transparent electrode. Thin films of ZnO doped with aluminum (ZnO:Al, AZO) or gallium (ZnO:Ga, GZO) obtained by various deposition methods, show a resistivity of the order

A nano-graphite cold cathode for an energy-efficient cathodoluminescent light source

• Alexander N. Obraztsov,
• Victor I. Kleshch and
• Elena A. Smolnikova

Beilstein J. Nanotechnol. 2013, 4, 493–500, doi:10.3762/bjnano.4.58

• the range of 2 to 5 kV, applied between the pencil core and the transparent anode. The anode was constructed of a glass plate with a conductive indium tin oxide (ITO) layer and covered by a CL phosphor. The bright spots in Figure 1B indicate the impingement of emitted electrons with the CL anode and

Guided immobilisation of single gold nanoparticles by chemical electron beam lithography

• Patrick A. Schaal and
• Ulrich Simon

Beilstein J. Nanotechnol. 2013, 4, 336–344, doi:10.3762/bjnano.4.39

• . Afterwards, these arrays are characterised by using atomic force microscopy. Keywords: 2D pattern; indium tin oxide (ITO); positioning; SAM; self-assembly; Introduction Periodic arrays of nanometre-sized metal structures hold great promise for future applications, e.g., in nanoelectronics [1][2][3][4] or

• of single AuNP arrays to other technically relevant substrates than Si/SiO2. Therefore, we conducted initial experiments by fabrication of AuNP patterns on indium tin oxide (ITO) covered foils of polyethylene terephthalate (PET) (see Supporting Information File 1 for the preliminary results), which

Functionalization of vertically aligned carbon nanotubes

• Eloise Van Hooijdonk,
• Carla Bittencourt,
• Rony Snyders and
• Jean-François Colomer

Beilstein J. Nanotechnol. 2013, 4, 129–152, doi:10.3762/bjnano.4.14

• optoelectronic and sensing applications. Aligned carbon nanotubes were coated uniformly by electrochemical deposition with an appropriate conducting polymer [126][127]. In order to manufacture plastic solar cells, transparent and flexible conductors are required. Traditionally, indium tin oxide (ITO) is

Influence of the diameter of single-walled carbon nanotube bundles on the optoelectronic performance of dry-deposited thin films

• Kimmo Mustonen,
• Toma Susi,
• Antti Kaskela,
• Patrik Laiho,
• Ying Tian,
• Albert G. Nasibulin and
• Esko I. Kauppinen

Beilstein J. Nanotechnol. 2012, 3, 692–702, doi:10.3762/bjnano.3.79

• been shown to compete, and even exceed, the performance of indium tin oxide (ITO) coatings on plastic substrates in terms of optoelectronic performance [6][17]. Moreover, ITO has multiple additional drawbacks, including a high refractive index, spectrally nonuniform optical transmission, very limited

Low-temperature synthesis of carbon nanotubes on indium tin oxide electrodes for organic solar cells

• Andrea Capasso,
• Luigi Salamandra,
• Aldo Di Carlo,
• John M. Bell and
• Nunzio Motta

Beilstein J. Nanotechnol. 2012, 3, 524–532, doi:10.3762/bjnano.3.60

• , University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy 10.3762/bjnano.3.60 Abstract The electrical performance of indium tin oxide (ITO) coated glass was improved by including a controlled layer of carbon nanotubes directly on top of the ITO film. Multiwall carbon nanotubes (MWCNTs) were

Self-assembly of octadecyltrichlorosilane: Surface structures formed using different protocols of particle lithography

• ChaMarra K. Saner,
• Kathie L. Lusker,
• Zorabel M. LeJeune,
• Wilson K. Serem and
• Jayne C. Garno

Beilstein J. Nanotechnol. 2012, 3, 114–122, doi:10.3762/bjnano.3.12

• on a wide range of substrates, such as glass [32], mica [33][34][35], quartz [36][37], indium tin oxide (ITO) [38], or silicon (Si) [11][32][39][40][41][42] or metal oxides such as gold [43][44]. This versatility of organosilanes in the preparation of nanostructures on different surfaces will be

Room temperature synthesis of indium tin oxide nanotubes with high precision wall thickness by electroless deposition

• Mario Boehme,
• Emanuel Ionescu,
• Ganhua Fu and
• Wolfgang Ensinger

Beilstein J. Nanotechnol. 2011, 2, 119–126, doi:10.3762/bjnano.2.14

• nanotubes consisting of indium tin oxide (ITO) were fabricated by electroless deposition using ion track etched polycarbonate templates. To produce nanotubes (NTs) with thin walls and small surface roughness, the tubes were generated by a multi-step procedure under aqueous conditions. The approach reported