Influence of conductive carbon and MnCo₂O₄ on morphological and electrical properties of hydrogels for electrochemical energy conversion

• Sylwia Pawłowska,
• Karolina Cysewska,
• Yasamin Ziai,
• Jakub Karczewski,
• Piotr Jasiński and
• Sebastian Molin

Beilstein J. Nanotechnol. 2024, 15, 57–70, doi:10.3762/bjnano.15.6

• , drugs, metal nanoparticles, metal oxide nanoparticles, carbon nanotubes, or biomolecules. This is a very important advantage that opens ways of designing composite hydrogels with various properties and applications such as biomedical [8][9][10], biosensors [11][12][13], wearable electronics [14][15][16

A wearable nanoscale heart sound sensor based on P(VDF-TrFE)/ZnO/GR and its application in cardiac disease detection

• Yi Luo,
• Jian Liu,
• Jiachang Zhang,
• Yu Xiao,
• Ying Wu and
• Zhidong Zhao

Beilstein J. Nanotechnol. 2023, 14, 819–833, doi:10.3762/bjnano.14.67

• a series of processing steps, the heart sound signal is obtained. However, PZT has a brittle texture, does not fit the skin well, and lacks comfort when worn, making it unsuitable for wearable sensors [10]. Moreover, the lead in PZT is harmful to humans. In recent years, there has been a significant

• advancement in wearable electronic devices within the healthcare field, leading to several noteworthy breakthroughs. For instance, D. Wan et al. [11] presented a groundbreaking development in the form of a flexible wearable friction patch. This innovative patch consists of a dual-layer PDMS membrane infused

• using a high-voltage electrospinning process. The resulting piezoelectric nanofilm was encapsulated into a wearable, flexible heart sound sensor for detecting heart sounds. A heart sound detection system was then built using LabVIEW software, which detects heart sounds and extracts features from the

Carbon nanotube-cellulose ink for rapid solvent identification

• Tiago Amarante,
• Thiago H. R. Cunha,
• Claudio Laudares,
• Ana P. M. Barboza,
• Ana Carolina dos Santos,
• Cíntia L. Pereira,
• Vinicius Ornelas,
• Bernardo R. A. Neves,
• André S. Ferlauto and
• Rodrigo G. Lacerda

Beilstein J. Nanotechnol. 2023, 14, 535–543, doi:10.3762/bjnano.14.44

• rapid, inexpensive, and robust liquid analysis and identification. Keywords: carbon nanotube; electronic tongue; fibrillated cellulose; liquid sensor; Introduction The development of a new generation of smart sensors that allow for the monitoring of industrial processes in real time and for wearable

Plasmonic nanotechnology for photothermal applications – an evaluation

• A. R. Indhu,
• L. Keerthana and
• Gnanaprakash Dharmalingam

Beilstein J. Nanotechnol. 2023, 14, 380–419, doi:10.3762/bjnano.14.33

• ], catalysis [19], clean water production [15], and wearable heaters [20][21], to name a few. This review is on PPT nanoparticle research spanning the conventional options (metals and alloys) as well as materials with induced plasmonic properties, with a special emphasis on their stability in terms of

Frequency-dependent nanomechanical profiling for medical diagnosis

• Santiago D. Solares and
• Alexander X. Cartagena-Rivera

Beilstein J. Nanotechnol. 2022, 13, 1483–1489, doi:10.3762/bjnano.13.122

• . Similar considerations exist for the development of soft wearable sensors or hydrogels for wound healing or drug delivery, among others. In all cases, it is of prime importance to create project teams with the appropriate make-up of expertise and within a well-designed strategy, such that ideas can be

Application of nanoarchitectonics in moist-electric generation

• Jia-Cheng Feng and
• Hong Xia

Beilstein J. Nanotechnol. 2022, 13, 1185–1200, doi:10.3762/bjnano.13.99

• electrode materials to collect the electric energy, wearable MEG textiles still need require further investigation. MEGs also have potential in other research fields. In micro/nano-driven devices [92], a hygro-responsive layer can use ambient humidity to provide a continuous power supply for the device

• mechanisms of solids and liquids at the nanoscale to fundamentally investigate the possibility of increasing the output power of MEGs. MEGs have great potential for applications as power generators for wearable self-powered pressure sensors, respiratory monitors, motion detectors, power sources for small

• . 105630, Copyright Elsevier (2021). This content is not subject to CC BY 4.0. (f) SEM image of high porosity TiO2 nanowire network. Figure 4f was reproduced from [54], Shen, D. et al., “Self-Powered Wearable Electronics Based on Moisture Enabled Electricity Generation”, Adv. Mater., with permission from

Electrostatic pull-in application in flexible devices: A review

• Teng Cai,
• Yuming Fang,
• Yingli Fang,
• Ruozhou Li,
• Ying Yu and
• Mingyang Huang

Beilstein J. Nanotechnol. 2022, 13, 390–403, doi:10.3762/bjnano.13.32

• more and more difficult for traditional electronic devices made of rigid substrates to meet the needs of flexible and low-cost applications in complex environments. Flexible electronics have great potential for applications such as portable displays, electronic skin, and wearable healthcare. With the

Piezoelectric nanogenerator for bio-mechanical strain measurement

• Zafar Javed,
• Lybah Rafiq,
• Muhammad Anwaar Nazeer,
• Saqib Siddiqui,
• Muhammad Babar Ramzan,
• Muhammad Qamar Khan and
• Muhammad Salman Naeem

Beilstein J. Nanotechnol. 2022, 13, 192–200, doi:10.3762/bjnano.13.14

• . With increasing bending angle, the output voltage increased. The promising results show that the textile-based piezoelectric sensor developed in this study has a great potential to be used as an angle measuring wearable device for the human body due to its high current density output and flexibility

• last couple of years. Textile-based sensors, being flexible, are easy to fit in a garment and create no barrier to the wearer. Nowadays, wearable sensors based on conductive threads and conductive polymers are capable of measuring vital signs of the human body [4][5]. Tognetti et al. [6] designed and

• to develop sensors that were a wearable type of a goniometer. These sensors were then tested under static and dynamic conditions. For another application, researchers designed and developed a purely textile-based capacitive pressure sensor to be integrated and embedded into the garments to monitor

Enhancement of the piezoelectric coefficient in PVDF-TrFe/CoFe₂O₄ nanocomposites through DC magnetic poling

• Marco Fortunato,
• Alessio Tamburrano,
• Maria Paola Bracciale,
• Maria Laura Santarelli and
• Maria Sabrina Sarto

Beilstein J. Nanotechnol. 2021, 12, 1262–1270, doi:10.3762/bjnano.12.93

• Rome, 00184 Rome, Italy Department of Chemical Engineering Materials and Environment, Sapienza University of Rome, 00184 Rome, Italy 10.3762/bjnano.12.93 Abstract In the last years flexible, low-cost, wearable, and innovative piezoelectric nanomaterials have attracted considerable interest regarding

• the use of a top electrode or of high magnetic fields (the maximum value of d33 was obtained at 50 mT, using a current of 0.4 A) making the PVDF-TrFE/CoFe2O4 nanocomposite suitable for the fabrication of highly efficient devices for energy harvesting and wearable sensors. Keywords: CoFe2O4; magnetic

• in the fabrication of energy harvesting devices or wearable sensors for flexible electronics applications. Experimental The PVDF-TrFe/CoFe2O4 nanocomposite thin films were produced through spin coating. The CoFe2O4 nanoparticles (Sigma-Aldrich, 99%) were dispersed in N,N-dimethylformamide (DMF, Sigma

Nanogenerator-based self-powered sensors for data collection

• Yicheng Shao,
• Maoliang Shen,
• Yuankai Zhou,
• Xin Cui,
• Lijie Li and
• Yan Zhang

Beilstein J. Nanotechnol. 2021, 12, 680–693, doi:10.3762/bjnano.12.54

• data as wearable and implantable devices. Nanogenerator-based self-powered sensors are a solution for collecting data and expanding data dimensions in a future intelligent society. The future key challenges and potential solutions regarding nanogenerator-based self-powered sensors are discussed

• . Keywords: data collection; Internet of Things; nanogenerator; self-powered sensor; wearable device; Introduction Self-powered sensor systems can harvest and convert environmental energy to electricity, which enables sensor operation without external power source [1][2]. Nanogenerators (NGs) can

• -powered sensors in data-driven intelligent systems are proposed. Review Human physiological data collection based on self-powered sensors Self-powered wearable sensors and electronic skin Self-powered wearable sensors to collect human motion data can provide a data set for medical diagnosis and

Simulation of gas sensing with a triboelectric nanogenerator

• Kaiqin Zhao,
• Hua Gan,
• Huan Li,
• Ziyu Liu and
• Zhiyuan Zhu

Beilstein J. Nanotechnol. 2021, 12, 507–516, doi:10.3762/bjnano.12.41

• gas and the different gas injection areas. This work contributes to the area of self-powered gas sensing. Keywords: gas; sensor; triboelectric nanogenerator (TENG); Introduction With economic development and social progress, there is an increasing demand for wearable [1][2][3][4], medical [5], and

• rate of utilization [19]. Characterized by low cost, light weight, environmental safety, and high conversion efficiency under low frequency, TENGs can provide continuous power supply for wearable devices [20], medical devices, and microelectronic systems [21]. In addition, triboelectric nanogenerators

A stretchable triboelectric nanogenerator made of silver-coated glass microspheres for human motion energy harvesting and self-powered sensing applications

• Hui Li,
• Yaju Zhang,
• Yonghui Wu,
• Hui Zhao,
• Weichao Wang,
• Xu He and
• Haiwu Zheng

Beilstein J. Nanotechnol. 2021, 12, 402–412, doi:10.3762/bjnano.12.32

• Defense Key Disciplines Lab of Novel Micro-nano Devices and System Technology, Chongqing University, Chongqing, 400044, China 10.3762/bjnano.12.32 Abstract Wearable triboelectric nanogenerators (TENGs) have recently attracted great interest because they can convert human biomechanical energy into

• satisfies the needs of reliability for flexible tactile sensors in realizing human–machine interfaces. This work expands the potential application of S-TENGs from wearable electronics and smart sensing systems to real-time robotics control and virtual reality/augmented reality interactions. Keywords: human

• motion energy; silver-coated glass microsphere; single-electrode mode; triboelectric nanogenerator; wearable; Introduction Traditional batteries cannot provide a durable and reliable power supply for small portable electronic devices, personalized healthcare, and Internet-of-Things (IoT) devices [1][2

Toward graphene textiles in wearable eye tracking systems for human–machine interaction

• Ata Jedari Golparvar and
• Murat Kaya Yapici

Beilstein J. Nanotechnol. 2021, 12, 180–189, doi:10.3762/bjnano.12.14

• interaction (HCI/HMI), and personal medical devices; provided that, seamless sensing of eye activity and processing thereof is achieved by a truly wearable, low-cost, and accessible technology. The present study demonstrates an alternative to the bulky and expensive camera-based eye tracking systems and

• reports the development of a graphene textile-based personal assistive device for the first time. This self-contained wearable prototype comprises a headband with soft graphene textile electrodes that overcome the limitations of conventional “wet” electrodes, along with miniaturized, portable readout

• electronics with real-time signal processing capability that can stream data to a remote device over Bluetooth. The potential of graphene textiles in wearable eye tracking and eye-operated remote object interaction is demonstrated by controlling a mouse cursor on screen for typing with a virtual keyboard and

Paper-based triboelectric nanogenerators and their applications: a review

• Jing Han,
• Nuo Xu,
• Yuchen Liang,
• Mei Ding,
• Junyi Zhai,
• Qijun Sun and
• Zhong Lin Wang

Beilstein J. Nanotechnol. 2021, 12, 151–171, doi:10.3762/bjnano.12.12

• that utilizes the output performances as sensing signals. The achieved high sensitivity of 500% (V/V-%RH) is useful for portable/wearable electronics and for potential industrial applications due to its flexibility and lightweight. Regarding height sensors, Xia et al. proposed a stacked 3D zigzag

ZnO and MXenes as electrode materials for supercapacitor devices

• Ameen Uddin Ammar,
• Ipek Deniz Yildirim,
• Feray Bakan and
• Emre Erdem

Beilstein J. Nanotechnol. 2021, 12, 49–57, doi:10.3762/bjnano.12.4

• Supercapacitor devices are interesting owing to their broad range of applicability from wearable electronics to energy storage in electric vehicles. One of the key parameters that affect the efficiency of supercapacitor devices is selecting the ideal electrode material for a specific application. Regarding this

• systems are not only required for renewable energy sources but also for portable or wearable electronics and electric vehicles [16][20][21]. To tackle these challenges supercapacitors are amongst the numerous candidates, due to unique properties such as high power density, fast charge/discharge capability

Piezotronic effect in AlGaN/AlN/GaN heterojunction nanowires used as a flexible strain sensor

• Jianqi Dong,
• Liang Chen,
• Yuqing Yang and
• Xingfu Wang

Beilstein J. Nanotechnol. 2020, 11, 1847–1853, doi:10.3762/bjnano.11.166

• investigated and systematically analyzed under compressive and tensile strain. Here, we describe a strain sensor that shows a great application potential in wearable integrated circuits, in health-monitoring devices, and in artificial intelligence. Keywords: AlGaN/AlN/GaN nanowires; flexible; piezotronic

• describes the fabrication of a highly sensitive and a highly stable strain sensor based on a new AlGaN/AlN/GaN NW structure, which has a great potential to be applied in wearable integrated circuits, health-monitoring devices, artificial intelligence, among other fields. Results and Discussion The epitaxial

• based on a new AlGaN/AlN/GaN NW structure, which has shown great application potential in several fields, including wearable integrated circuits, health-monitoring devices, and artificial intelligence. Experimental Synthesis of the epitaxial structure The epitaxial structure used in this study was grown

Piezoelectric sensor based on graphene-doped PVDF nanofibers for sign language translation

• Shuai Yang,
• Xiaojing Cui,
• Rui Guo,
• Zhiyi Zhang,
• Shengbo Sang and
• Hulin Zhang

Beilstein J. Nanotechnol. 2020, 11, 1655–1662, doi:10.3762/bjnano.11.148

• , piezoelectric sensors show potential in wearable sensing applications [19][36][37][38][39][40][41]. However, traditional piezoelectric sensor devices such as piezoelectric ceramics have disadvantages in detecting bending, and their detection stability and measurement range need to be improved [18][42][43][44

• bending angle. Also, the effect of different doping concentrations on the sensitivity is shown. The pyroelectric voltage can be used to prevent burns. The PES-based sign language recognition system has a good recognition effect for different actions. Our work has paved the way for wearable motion-tracking

A self-powered, flexible ultra-thin Si/ZnO nanowire photodetector as full-spectrum optical sensor and pyroelectric nanogenerator

• Liang Chen,
• Jianqi Dong,
• Miao He and
• Xingfu Wang

Beilstein J. Nanotechnol. 2020, 11, 1623–1630, doi:10.3762/bjnano.11.145

• applied in flexible wearable electronic devices have been extensively researched [5]. The majority of the reported full-spectrum PDs, which are based on perovskites, quantum dots, or organic materials are costly, complicated to prepare, and difficult to integrate into flexible electronic devices. This

• environment, low cost, and easy preparation [6][7][8][9]. However, the energy supply system of traditional Si-based flexible PDs utilizes an external battery, which will affect the portability, comfort, and durability of wearable devices due to large volume, and limited capacity. Therefore, it is necessary to

Walking energy harvesting and self-powered tracking system based on triboelectric nanogenerators

• Mingliang Yao,
• Guangzhong Xie,
• Qichen Gong and
• Yuanjie Su

Beilstein J. Nanotechnol. 2020, 11, 1590–1595, doi:10.3762/bjnano.11.141

• transportation alternatives. Keywords: harvesting walking energy; internet of things; mechanical energy; pedestrian flow area; self-powered tracking system; triboelectric nanogenerator; Introduction With the fast progress in urbanization and commercialization, energy acquisition for powering wearable

Triboelectric nanogenerator based on Teflon/vitamin B1 powder for self-powered humidity sensing

• Liangyi Zhang,
• Huan Li,
• Yiyuan Xie,
• Jing Guo and
• Zhiyuan Zhu

Beilstein J. Nanotechnol. 2020, 11, 1394–1401, doi:10.3762/bjnano.11.123

• , food safety, wearable electronics, and wireless sensor networks [1][2][3][4]. However, conventional power generation is needed to supply energy to these sensor networks, which leads to increased energy usage and adverse impacts on the environment. More specifically, the degradation of the urban

• significant impact on the advancement of wearable electronics, intelligent robots, and the IoT [22][23][24][25][26][27][28]. Presently, TENGs are used to harvest various forms of mechanical energy from the surrounding environment, such as acoustic energy, wind, vibrations and human motion [29][30][31][32][33

Exfoliation in a low boiling point solvent and electrochemical applications of MoO₃

• Matangi Sricharan,
• Bikesh Gupta,
• Sreejesh Moolayadukkam and
• H. S. S. Ramakrishna Matte

Beilstein J. Nanotechnol. 2020, 11, 662–670, doi:10.3762/bjnano.11.52

• for the fabrication of flexible supercapacitors for wearable electronics. (a) UV–vis spectra of MoO3 dispersions obtained from different initial concentrations (Ci). The inset shows the final concentration as a function of the initial concentration; (b) UV–vis spectra of MoO3 dispersions obtained from

Review of advanced sensor devices employing nanoarchitectonics concepts

• Katsuhiko Ariga,
• Tatsuyuki Makita,
• Masato Ito,
• Taizo Mori,
• Shun Watanabe and
• Jun Takeya

Beilstein J. Nanotechnol. 2019, 10, 2014–2030, doi:10.3762/bjnano.10.198

• ultrathin polyethylene terephthalate foils. The prepared sensors are extremely flexible (bending radii <3 µm) and light weight (≈3 g m−2). They are wearable and act as a magneto-sensitive skin with navigation and touchless control capabilities. Biosensors Because biosensors can provide crucial contributions

• materials. Once developed, these technologies have to be translated into real-world applications for potential impact on daily life. A roadmap for this technology transfer cannot be easily predicted, but should include important factors such as miniaturization, wearable features, scalability, reliability

Pure and mixed ordered monolayers of tetracyano-2,6-naphthoquinodimethane and hexathiapentacene on the Ag(100) surface

• Robert Harbers,
• Timo Heepenstrick,
• Dmitrii F. Perepichka and
• Moritz Sokolowski

Beilstein J. Nanotechnol. 2019, 10, 1188–1199, doi:10.3762/bjnano.10.118

• have a “great potential for use in next-generation textile and wearable electronics” [22]. HTPEN was investigated as a material for organic solar cells [23], for which purpose it was combined with lead(II) phthalocyanine and pentacene. These heterostructures exhibit a greater range of photosensitivity

Wearable, stable, highly sensitive hydrogel–graphene strain sensors

• Jian Lv,
• Chuncai Kong,
• Chao Yang,
• Lu Yin,
• Itthipon Jeerapan,
• Fangzhao Pu,
• Xiaojing Zhang,
• Sen Yang and
• Zhimao Yang

Beilstein J. Nanotechnol. 2019, 10, 475–480, doi:10.3762/bjnano.10.47

• sensor to be used in both stretching and bending modes. As a demonstration, the as-prepared strain sensor was applied to sense the movement of finger knuckles. Given the outstanding performance of this wearable sensor, together with the proposed scalable fabrication method, this stable and sensitive

• hydrogel strain sensor is considered to have great potential in the field of wearable sensors. Keywords: graphene; high sensitivity; hydrogel; strain sensor; wearable sensor; Introduction Wearable, flexible sensors to monitor human body pressure, temperature, strain, and chemicals hold great potential in

• human skin has impeded further integration as a wearable sensing component [7]. Hydrogels, with mechanical properties like biological tissues and consisting of three-dimensional polymer networks that can retain a large amount of water, can serve as ideal vehicles for wearable devices [8][9]. Several

A Ni(OH)₂ nanopetals network for high-performance supercapacitors synthesized by immersing Ni nanofoam in water

• Donghui Zheng,
• Man Li,
• Yongyan Li,
• Chunling Qin,
• Yichao Wang and
• Zhifeng Wang

Beilstein J. Nanotechnol. 2019, 10, 281–293, doi:10.3762/bjnano.10.27

• provides a new idea for the synthesis of nanostructured Ni(OH)2 by a simple approach and ultra-low cost, which largely extends the prospect of commercial application in flexible or wearable devices. Keywords: dealloying; Ni nanofoam; Ni(OH)2 nanopetals; metallic glass; supercapacitor; Introduction

• the electrodes based on electro-active Ni(OH)2. Besides, the key point is that Ni(OH)2/Ni-NF/MG electrodes exhibit excellent flexibility, which is a prominent feature of Ni(OH)2/Ni-NF/MG electrodes and meets the requirements of wearable devices. The outstanding electrochemical performance of Ni(OH)2

• flexibility are a promising prospect in wearable energy storage devices. Conclusion In summary, a sandwich-like Ni(OH)2/Ni-NF/MG electrode with good flexibility was synthesized through a two-step synthesis including the dealloying of ductile Ni40Zr20Ti40 metallic glass to form a Ni nanofoam interlayer and