Piezoelectricity of layered double hydroxides: perspectives regarding piezocatalysis and nanogenerators

• Evgeniy S. Seliverstov,
• Evgeniya A. Tarasenko and
• Olga E. Lebedeva

Beilstein J. Nanotechnol. 2025, 16, 1812–1817, doi:10.3762/bjnano.16.124

• organically modified Ni/Co-LDH nanosheets. However, some concerns arise regarding whether the synthesized material reported by the authors can indeed be classified as a Ni/Co-LDH. First, the synthesis was carried out using salts of divalent nickel and divalent cobalt at a Ni/Co ratio of 1:2. In the absence of

• trivalent cations, which are required to generate the excess positive charge necessary for stabilizing the LDHs structure, the formation of a pure LDH phase appears questionable. Moreover, the authors did not report any subsequent oxidation of nickel or cobalt to the trivalent state that could have

• /Al-LDHs. The crystal structure of LDHs is fairly flexible, enabling adjustment of their cationic composition. One widely used method for preparing LDH-based catalysts is cation doping further increasing their catalytic activity. A cobalt-doped Zn/Al-LDH (ZnCo/Al-LDH) piezoelectric catalyst was used

Ambient pressure XPS at MAX IV

• Mattia Scardamaglia,
• Ulrike Küst,
• Alexander Klyushin,
• Rosemary Jones,
• Jan Knudsen,
• Robert Temperton,
• Andrey Shavorskiy and
• Esko Kokkonen

Beilstein J. Nanotechnol. 2025, 16, 1677–1694, doi:10.3762/bjnano.16.118

• here. Instead, we focus on a study by Vesselli and co-workers that directly addresses catalytic activity in a biomimetic SAC system [20][21]. In their work, a cobalt single-atom biomimetic model catalyst is based on a self-assembled monolayer of Co-porphyrins grown on an almost free-standing graphene

Modeling magnetic properties of cobalt nanofilms used as a component of spin hybrid superconductor–ferromagnetic structures

• Aleksey Fedotov,
• Olesya Severyukhina,
• Anastasia Salomatina and
• Anatolie Sidorenko

Beilstein J. Nanotechnol. 2025, 16, 1557–1566, doi:10.3762/bjnano.16.110

• small nanoscale system (500 atoms) consisting of cobalt atoms was solved. The purpose of this stage of computational experiment was to check the convergence of the solution and compare the obtained data with the results of other studies. The performed calculations and satisfactory correspondence to the

• previously obtained data confirmed the adequacy of the applied mathematical model. The second stage of numerical studies was devoted to the analysis of the magnetic behavior of cobalt nanofilms of different thicknesses. It was shown that the film thickness has a significant influence on the magnetic

• technologies [5][6][7] based on Josephson junctions. It is well established that the properties of nanostructures can significantly differ from those of bulk samples. Currently, close attention is paid to thin-film magnetic structures, which include cobalt and iron [8][9][10]. Thus, in [1], the crystal

Laser processing in liquids: insights into nanocolloid generation and thin film integration for energy, photonic, and sensing applications

• Akshana Parameswaran Sreekala,
• Pooja Raveendran Nair,
• Jithin Kundalam Kadavath,
• Bindu Krishnan,
• David Avellaneda Avellaneda,
• M. R. Anantharaman and
• Sadasivan Shaji

Beilstein J. Nanotechnol. 2025, 16, 1428–1498, doi:10.3762/bjnano.16.104

• 80 and 120 °C. A stable nanocolloid of cobalt oxide (Co2O3) was prepared in water by PLFL, and nanostructured cobalt oxide thin films were fabricated by spray deposition nanocolloid onto heated glass substrates [144]. 2.5 Electrophoretic deposition EPD is a process involving the electrokinetic

Enhancing the therapeutical potential of metalloantibiotics using nano-based delivery systems

• Alejandro Llamedo,
• Marina Cano,
• Raquel G. Soengas and
• Francisco J. García-Alonso

Beilstein J. Nanotechnol. 2025, 16, 1350–1366, doi:10.3762/bjnano.16.98

• wound. Thus, liposomes emerged as the most promising candidates for the development safer and more effective aPDT agents. Cobalt complexes Numerous studies have highlighted the antibacterial capabilities of cobalt complexes, often noting their superior efficacy when cobalt ions are chelated to a ligand

• rather than used in their free ionic form [142]. Importantly, both the ligand structure and the redox potential of the complex are key determinants of stability and therapeutic potency [143]. Nano-based delivery systems have also been used to improve the stability and therapeutic efficacy of cobalt

• metalloantibiotics. For this purpose, the cobalt(III) complex 22 (Figure 5) was encapsulated into a biocompatible nanocarrier system based on poly(lactic-co-glycolic acid)-block-polyethylene glycol (PLGA-PEG) [144]. The resulting nanoconjugate exhibited efficient loading of the cobalt compound and demonstrated a pH

Fabrication of metal complex phthalocyanine and porphyrin nanoparticle aqueous colloids by pulsed laser fragmentation in liquid and their potential application to a photosensitizer for photodynamic therapy

• Taisei Himeda,
• Risako Kunitomi,
• Ryosuke Nabeya,
• Tamotsu Zako and
• Tsuyoshi Asahi

Beilstein J. Nanotechnol. 2025, 16, 1088–1096, doi:10.3762/bjnano.16.80

• useful as a potential photosensitizer for PDT treatments in biomedical applications. Experimental Materials Cobalt(II) phthalocyanine (CoPc, 97%), nickel(II) phthalocyanine (NiPc, 85%), platinum octaethylporphyrin (PtOEP, 98%), and Pluronic® F-127 were purchased from Sigma-Aldrich. Chloroaluminum

Polyurethane/silk fibroin-based electrospun membranes for wound healing and skin substitute applications

• Iqra Zainab,
• Zohra Naseem,
• Syeda Rubab Batool,
• Muhammad Waqas,
• Ahsan Nazir and
• Muhammad Anwaar Nazeer

Beilstein J. Nanotechnol. 2025, 16, 591–612, doi:10.3762/bjnano.16.46

• antibacterial properties of PU nanofibrous membranes [162]. PU/gelatin and PU/cobalt nitrate were used to create mixed nanofibers scaffolds used to develop wound dressings [162][163]. It was shown that cobalt nitrate added to the PU wound dressing resulted in improved physicochemical properties, blood

Zeolite materials with Ni and Co: synthesis and catalytic potential in the selective hydrogenation of citral

• Inocente Rodríguez-Iznaga,
• Yailen Costa Marrero,
• Tania Farias Piñeira,
• Céline Fontaine,
• Lexane Paget,
• Beatriz Concepción Rosabal,
• Arbelio Penton Madrigal,
• Vitalii Petranovskii and
• Gwendoline Lafaye

Beilstein J. Nanotechnol. 2025, 16, 520–529, doi:10.3762/bjnano.16.40

• , La Habana, Cuba Centro de Nanociencia y Nanotecnología (CNyN), Universidad Nacional Autónoma de México (UNAM), 22860, Ensenada, B.C., México 10.3762/bjnano.16.40 Abstract Zeolitic materials incorporating mono- and bimetallic systems of nickel and cobalt were obtained from natural zeolite modified

• produce unsaturated alcohols, suggesting that synergistic Ni–Co interactions played a role in their formation. Keywords: citral hydrogenation; cobalt–nickel mixture; impregnation; ion exchange; natural zeolite; Introduction Numerous publications in the literature highlight zeolites modified with

• and cinnamaldehyde [3][14][15]. Zeolites modified with nickel and cobalt have shown promising results in selective hydrogenation reactions, owing to their high dispersion of active sites and tunable acidity. For instance, a zeolite-supported Ni catalyst has demonstrated selectivity in furfural

Effect of additives on the synthesis efficiency of nanoparticles by laser-induced reduction

• Rikuto Kuroda,
• Takahiro Nakamura,
• Hideki Ina and
• Shuhei Shibata

Beilstein J. Nanotechnol. 2025, 16, 464–472, doi:10.3762/bjnano.16.35

• ) synthesized by LAL with IPA as a scavenger. UV–vis absorption spectrum after 60 min of laser irradiation in aqueous solutions of cobalt nitrate a) without and b) with IPA as a scavenger. The inset images are photographs of the appearance of each solution before and after laser irradiation. c) A TEM image of

ReactorAFM/STM – dynamic reactions on surfaces at elevated temperature and atmospheric pressure

• Tycho Roorda,
• Hamed Achour,
• Matthijs A. van Spronsen,
• Marta E. Cañas-Ventura,
• Sander B. Roobol,
• Willem Onderwaater,
• Mirthe Bergman,
• Peter van der Tuijn,
• Gertjan van Baarle,
• Johan W. Bakker,
• Joost W. M. Frenken and
• Irene M. N. Groot

Beilstein J. Nanotechnol. 2025, 16, 397–406, doi:10.3762/bjnano.16.30

• cobalt nanoparticle catalysts on an aluminum oxide support, industrially relevant in the Fischer–Tropsch synthesis. The catalysts are imaged before and after reaction at 430 K as the current maximum temperature of the qPlus sensor used falls just below the reaction temperature. Quadrupole mass

• show operando combined AFM/STM images of a clean Pd(100) single crystal that undergoes oxidation of the surface. The oxidation happens at 450 K under 0.5 bar of oxygen atmosphere. The second experiment is a FTS experiment, where we show AFM images of catalytic cobalt nanoparticles. The nanoparticles

• the main setup, the sample is annealed at 800 K in 10−6 mbar of O2 to remove carbon impurities and replenish the oxygen in the oxide layer. The composition of the surface was verified by AES (not shown here). The cobalt nanoparticles were deposited by e-beam evaporation with a Co rod, an emission

Engineered PEG–PCL nanoparticles enable sensitive and selective detection of sodium dodecyl sulfate: a qualitative and quantitative analysis

• Soni Prajapati and
• Ranjana Singh

Beilstein J. Nanotechnol. 2025, 16, 385–396, doi:10.3762/bjnano.16.29

• ) and Bradford reagent (Cat. No. 19219) were purchased from SRL Chemicals (India). NIST-grade standards of arsenic (As3+), aluminium (Al3+), cadmium (Cd2+), zinc (Zn2+), mercury (Hg2+), nickel (Ni2+), copper (Cu2+), chromium (Cr3+), lead (Pb2+), iron (Fe3+), and cobalt (Co2+) (Cat. No. 041865), as well

Probing the potential of rare earth elements in the development of new anticancer drugs: single molecule studies

• Josiane A. D. Batista,
• Rayane M. de Oliveira,
• Carlos H. M. Lima,
• Milton L. Lana Júnior,
• Virgílio C. dos Anjos,
• Maria J. V. Bell and
• Márcio S. Rocha

Beilstein J. Nanotechnol. 2025, 16, 187–194, doi:10.3762/bjnano.16.15

• trivalent rare earth cations can interact with the double helix, promoting the well-known cation-induced DNA condensation process, just as other polycations such as, for example, spermidine and hexaammine cobalt [29][31]. Note that the threshold concentration for DNA condensation to occur depends strongly

Fabrication of hafnium-based nanoparticles and nanostructures using picosecond laser ablation

• Abhishek Das,
• Mangababu Akkanaboina,
• Jagannath Rathod,
• R. Sai Prasad Goud,
• Kanaka Ravi Kumar,
• Raghu C. Reddy,
• Ratheesh Ravendran,
• Katia Vutova,
• S. V. S. Nageswara Rao and
• Venugopal Rao Soma

Beilstein J. Nanotechnol. 2024, 15, 1639–1653, doi:10.3762/bjnano.15.129

• carbides by LAL in aromatic solvents was reported previously with transition metals such as iron and cobalt [54][55][56]. Kanitz et al. [55] have reported the formation of pure (i.e., with a clean surface) iron nanoparticles when the target was ablated with femtosecond pulses (5 kHz repetition rate, though

Nanoarchitectonics with cetrimonium bromide on metal nanoparticles for linker-free detection of toxic metal ions and catalytic degradation of 4-nitrophenol

• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2024, 15, 1312–1332, doi:10.3762/bjnano.15.106

• -nitrophenol are both dangerous to humans [10][11]. Contamination with toxic heavy metal ions, including zinc, arsenic, aluminium, chromium, iron, cobalt, copper, nickel, mercury, cadmium, and lead, causes significant chronic damage to organ systems, beginning at the cellular level [12]. Toxic heavy metal ions

• also leads to undesirable side effects such as iron overload (hemochromatosis) and acute iron poisoning [14]. Similarly, other metals, including copper and cobalt, significantly damage different body parts above a threshold limit. Heavy metal ions pose a severe risk to human and environmental health

• -modified isotropic and anisotropic CTAB-AgNPs were used to detect cobalt ions. The author found that only rod-shaped particles enabled visual detection of cobalt [25]. Yagyu et al. showed the efficient removal of radioactive cesium using Prussian blue [26]. Also, 4-nitrophenol was degraded using CTAB

Interface properties of nanostructured carbon-coated biological implants: an overview

• Mattia Bartoli,
• Francesca Cardano,
• Erik Piatti,
• Stefania Lettieri,
• Andrea Fin and
• Alberto Tagliaferro

Beilstein J. Nanotechnol. 2024, 15, 1041–1053, doi:10.3762/bjnano.15.85

• [110][111]. Romo-Rico et al. [112] used PVD to coat a medical-grade cobalt–chromium alloy with high-grade graphene. The authors reported an appreciable antibacterial activity against S. aureus and P. aeruginosa; also, adhesion was prevented. This study proved that the balance between surface polarity

Electron-induced deposition using Fe(CO)₄MA and Fe(CO)₅ – effect of MA ligand and process conditions

• Hannah Boeckers,
• Atul Chaudhary,
• Petra Martinović,
• Amy V. Walker,
• Lisa McElwee-White and
• Petra Swiderek

Beilstein J. Nanotechnol. 2024, 15, 500–516, doi:10.3762/bjnano.15.45

• nanostructures produced by FEBID are of interest for diverse applications including magnetic data storage devices [4][5][6], tips for magnetic force microscopy [4][7], or sensors [4][8]. The same applies to cobalt nanostructures, which can be prepared with high purity and shape fidelity using, in particular, the

Photocatalytic degradation of methylene blue under visible light by cobalt ferrite nanoparticles/graphene quantum dots

• Vo Chau Ngoc Anh,
• Le Thi Thanh Nhi,
• Le Thi Kim Dung,
• Dang Thi Ngoc Hoa,
• Nguyen Truong Son,
• Nguyen Thi Thao Uyen,
• Nguyen Ngoc Uyen Thu,
• Le Van Thanh Son,
• Le Trung Hieu,
• Tran Ngoc Tuyen and
• Dinh Quang Khieu

Beilstein J. Nanotechnol. 2024, 15, 475–489, doi:10.3762/bjnano.15.43

• synthesize cobalt ferrite nanoparticles/graphene quantum dots (CF/GQDs). The material was prepared from a homogeneous mixture of iron nitrate, cobalt nitrate, and starch at 140, 180 and 200 °C in a 24 h thermal hydrolysis process. The obtained materials were characterised by using X-ray diffraction, scanning

• electron microscopy, transmission electron microscopy, ultraviolet–visible diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, photoluminescence spectroscopy, vibrating-sample magnetometry, and nitrogen adsorption/desorption isotherms. Cobalt ferrite crystals of around 8–10 nm and

• degradation and other dyes. Keywords: cobalt ferrite; graphene quantum dots; methylene blue; Introduction Graphene quantum dots (GQDs) have unique properties, including photoluminescence, biocompatibility, slight chemical toxicity, inertness, and excellent photostability [1][2]. Graphene quantum dots

Classification and application of metal-based nanoantioxidants in medicine and healthcare

• Nguyen Nhat Nam,
• Nguyen Khoi Song Tran,
• Tan Tai Nguyen,
• Nguyen Ngoc Trai,
• Nguyen Phuong Thuy,
• Hoang Dang Khoa Do,
• Nhu Hoa Thi Tran and
• Kieu The Loan Trinh

Beilstein J. Nanotechnol. 2024, 15, 396–415, doi:10.3762/bjnano.15.36

• employ the properties of transition metals and metal oxides (e.g., cobalt, iron, cerium, and gold), which can generate a cycle of reduction and oxidation stages [20][21][22][23]. Among these metal oxides, cerium oxide-based nanomaterials have been deeply studied with regard to the mechanisms of CAT

• reported. Most of them employ transition metals such as iron [70], copper [71], cobalt [72], gold [73], manganese [74], platinum [75], or cerium [76] as main elements. Most transition metals have various oxidation states allowing them to generate cycles of redox reactions that are involved in superoxide

Influence of conductive carbon and MnCo₂O₄ on morphological and electrical properties of hydrogels for electrochemical energy conversion

• Sylwia Pawłowska,
• Karolina Cysewska,
• Yasamin Ziai,
• Jakub Karczewski,
• Piotr Jasiński and
• Sebastian Molin

Beilstein J. Nanotechnol. 2024, 15, 57–70, doi:10.3762/bjnano.15.6

• (APS, 98%, Sigma-Aldrich, Poland), N,N,N′,N′-tetramethylethylenediamine (TEMED, 99%, Sigma-Aldrich, Poland), commercially available manganese cobalt spinel MnCo2O4 powder (MCO, Marion Technologie, France), Super P Li conductive carbon black (cCB, Imerys, Belgium), 0.1 M KOH (Titripur®, Merck, Germany

Fragmentation of metal(II) bis(acetylacetonate) complexes induced by slow electrons

• Janina Kopyra and
• Hassan Abdoul-Carime

Beilstein J. Nanotechnol. 2023, 14, 980–987, doi:10.3762/bjnano.14.81

• the ligands, that is, (L-C3H3), is observed for CoL2 (Figure 2), NiL2 (Figure 3), and CuL2 (Figure 4), as [ML(L-C3H3)]− anion (Table 1). We can notice that the Mn (Figure 5) and Cu (Figure 4) complexes produce fewer fragments than those containing cobalt, nickel, and zinc. Furthermore, the

Low temperature atomic layer deposition of cobalt using dicobalt hexacarbonyl-1-heptyne as precursor

• Mathias Franz,
• Mahnaz Safian Jouzdani,
• Lysann Kaßner,
• Marcus Daniel,
• Frank Stahr and
• Stefan E. Schulz

Beilstein J. Nanotechnol. 2023, 14, 951–963, doi:10.3762/bjnano.14.78

• , Clemens-Winkler-Str. 6c, 09116 Chemnitz, Germany FAP Forschungs- und Applikationslabor Plasmatechnik GmbH, Gostritzer Str. 67B, 01217 Dresden, Germany 10.3762/bjnano.14.78 Abstract In this work, we present the development of an atomic layer deposition (ALD) process for metallic cobalt. The process

• saturation behaviour of the process was investigated. X-ray photoelectron spectroscopy measurements could show that the deposited cobalt is in the metallic state. The finally established process in ALD mode shows a homogeneous coating at the wafer level. Keywords: atomic layer deposition (ALD); cobalt; low

• -temperature ALD; PEALD; plasma-enhanced ALD; XPS; Introduction The atomic layer deposition (ALD) of cobalt films is an ongoing topic of interest [1]. Cobalt thin and ultrathin films play an important role in current generations of integrated circuits [2]. Compared to copper, the metal offers a greater

Upscaling the urea method synthesis of CoAl layered double hydroxides

• Camilo Jaramillo-Hernández,
• Víctor Oestreicher,
• Martín Mizrahi and
• Gonzalo Abellán

Beilstein J. Nanotechnol. 2023, 14, 927–938, doi:10.3762/bjnano.14.76

• high-left and low-right shoulders around 492 and 450 nm. The shape and the position of these d–d electronic transition bands are assigned to the 4T1g→4T1g(P) and 4T1g→4A2g(F) transitions in octahedral divalent cobalt cations (CoII(Oh)) [31][51][52]. However, the sample x25M contains an extra band with

• applications of great interest. Experimental Chemicals Cobalt chloride hexahydrate (CoCl2·6H2O), aluminium chloride hexahydrate (AlCl3·6H2O), urea, and ethanol (EtOH) were purchased from Honeywell. All chemicals were used as received. Milli‐Q water was obtained from a Millipore Milli‐Q equipment. Synthesis

• for Co 2p (2p3/2 and 2p1/2) in the range of 810–770 eV. (D) UV–vis spectra pointing out the marked differences between the octahedral CoII(Oh) and tetrahedral environments CoII(Td) of cobalt for the scale-up samples. (A) Normalized XANES spectra at the Co K edge for the obtained samples. The grey line

Ni, Co, Zn, and Cu metal-organic framework-based nanomaterials for electrochemical reduction of CO₂: A review

• Ha Huu Do and
• Hai Bang Truong

Beilstein J. Nanotechnol. 2023, 14, 904–911, doi:10.3762/bjnano.14.74

• architectures, pronounced porosity, abundant active sites, and well-distributed metallic nodes. This article commences by elucidating the mechanistic aspects of CO2 reduction, followed by a comprehensive exploration of diverse materials encompassing MOFs based on nickel, cobalt, zinc, and copper for efficient

• to the enhanced number of active sites achieved through the transition from the bulk state to the nanomaterial form. The optimal condition for the fabrication of 2D Ni(Im)2 was determined to be the utilization of 5 mL of NH4OH. Co-based MOFs nanomaterials Cobalt materials provide a diversity of

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

• Akeem Adeyemi Oladipo,
• Saba Derakhshan Oskouei and
• Mustafa Gazi

Beilstein J. Nanotechnol. 2023, 14, 631–673, doi:10.3762/bjnano.14.52

• behaviour even further. Through variation in temperature resistivity, Clough et al. [83] demonstrated band-like metallic conductivity in cobalt-based MOF. The ferroelectric characteristics of MOFs have not yet been extensively investigated experimentally. However, calculations based on density functional

Mixed oxides with corundum-type structure obtained from recycling can seals as paint pigments: color stability

• Dienifer F. L. Horsth,
• Julia de O. Primo,
• Nayara Balaba,
• Fauze J. Anaissi and
• Carla Bittencourt

Beilstein J. Nanotechnol. 2023, 14, 467–477, doi:10.3762/bjnano.14.37

• without added pigments exhibits a more significant color variation (ΔE) in an acid environment. A work under similar conditions of harsh environments with cobalt and nickel aluminates obtained by the same synthetic route used in this article yielded similar results of color stability [14], with