Rapid synthesis of highly monodisperse AgSbS₂ nanocrystals: unveiling multifaceted activities in cancer therapy, antibacterial strategies, and antioxidant defense

• Funda Ulusu,
• Adem Sarilmaz,
• Yakup Ulusu,
• Faruk Ozel and
• Mahmut Kus

Beilstein J. Nanotechnol. 2025, 16, 2105–2115, doi:10.3762/bjnano.16.145

• , Department of Mechanical Engineering, 53020, Rize, Turkey Department of Chemical Engineering, Konya Technical University, Konya, Turkey 10.3762/bjnano.16.145 Abstract Nanocrystals (NCs) of silver antimony sulfide (AgSbS2) in the cubic phase were successfully synthesized using the hot-injection method. This

• ) chloride (SbCl3, ≥99.95%), 1-octadecene (ODE, 90%), and ethanol were obtained from Sigma-Aldrich. Toluene was obtained from VWR. 1-Dodecanethiol (1-DDT, C12H26S) was purchased from Alfa Aesar. Rapid synthesis of AgSbS2 NCs Cubic-phase silver antimony sulfide NCs (AgSbS2 NCs) were synthesized by hot

Laser processing in liquids: insights into nanocolloid generation and thin film integration for energy, photonic, and sensing applications

• Akshana Parameswaran Sreekala,
• Pooja Raveendran Nair,
• Jithin Kundalam Kadavath,
• Bindu Krishnan,
• David Avellaneda Avellaneda,
• M. R. Anantharaman and
• Sadasivan Shaji

Beilstein J. Nanotechnol. 2025, 16, 1428–1498, doi:10.3762/bjnano.16.104

• thin films via spray-deposition of laser-ablated SnS2 nanocolloids has been reported [143]. Copper antimony sulfide (CuSbS2, CAS) thin films have been deposited on glass, FTO, and Si substrates by spraying the laser-ablated CAS nanocolloid onto heated substrates [130]. Crystalline molybdenum oxide

Semitransparent Sb₂S₃ thin film solar cells by ultrasonic spray pyrolysis for use in solar windows

• Jako S. Eensalu,
• Atanas Katerski,
• Erki Kärber,
• Lothar Weinhardt,
• Monika Blum,
• Clemens Heske,
• Wanli Yang,
• Ilona Oja Acik and
• Malle Krunks

Beilstein J. Nanotechnol. 2019, 10, 2396–2409, doi:10.3762/bjnano.10.230

• . Keywords: antimony sulfide; semitransparent solar cells; solar windows; thin films; ultrasonic spray pyrolysis; Introduction Modern buildings, especially high-rise buildings, have a large window area available for building-integrated photovoltaics (BIPV). Covering the windows with semitransparent thin

Uniform Sb₂S₃ optical coatings by chemical spray method

• Jako S. Eensalu,
• Atanas Katerski,
• Erki Kärber,
• Ilona Oja Acik,
• Arvo Mere and
• Malle Krunks

Beilstein J. Nanotechnol. 2019, 10, 198–210, doi:10.3762/bjnano.10.18

• pyrolysis in air by tuning of the deposition temperature, the Sb/S precursor molar ratio in the spray solution, and the post-deposition treatment temperature. Keywords: antimony sulfide; thin films; ultrasonic spray; vacuum annealing; Volmer–Weber growth; Introduction Antimony sulfide (Sb2S3) is an

• Jako S. Eensalu Atanas Katerski Erki Karber Ilona Oja Acik Arvo Mere Malle Krunks Laboratory of Thin Film Chemical Technologies, Department of Materials and Environmental Technology, Tallinn University of Technology, Ehitajate tee 5, Tallinn 19086, Estonia 10.3762/bjnano.10.18 Abstract Antimony

• sulfide (Sb2S3), an environmentally benign material, has been prepared by various deposition methods for use as a solar absorber due to its direct band gap of ≈1.7 eV and high absorption coefficient in the visible light spectrum (1.8 × 105 cm−1 at 450 nm). Rapid, scalable, economically viable and

Spin-coated planar Sb₂S₃ hybrid solar cells approaching 5% efficiency

• Pascal Kaienburg,
• Benjamin Klingebiel and
• Thomas Kirchartz

Beilstein J. Nanotechnol. 2018, 9, 2114–2124, doi:10.3762/bjnano.9.200

• Pascal Kaienburg Benjamin Klingebiel Thomas Kirchartz IEK5-Photovoltaics, Forschungszentrum Jülich, 52425 Jülich, Germany Faculty of Engineering and CENIDE, University of Duisburg-Essen, Carl-Benz-Str. 199, 47057 Duisburg, Germany 10.3762/bjnano.9.200 Abstract Antimony sulfide solar cells have

• conditions, the role of the polymeric hole transport material is discussed. The efficiency of our best solar cells exceeds previous reports for each processing route, and our champion device displays one of the highest efficiencies reported for planar antimony sulfide solar cells. Keywords: antimony sulfide

• ; hole transport material; solar cell; Introduction Antimony sulfide (Sb2S3) is a promising high band gap light absorber for solar cells [1][2][3][4][5]. The record efficiency of 7.5% [6] is comparable to that of other less investigated materials, such as the best lead-free perovskites [7], Cu2O [8] and

Sb₂S₃ grown by ultrasonic spray pyrolysis and its application in a hybrid solar cell

• Erki Kärber,
• Atanas Katerski,
• Ilona Oja Acik,
• Arvo Mere,
• Valdek Mikli and
• Malle Krunks

Beilstein J. Nanotechnol. 2016, 7, 1662–1673, doi:10.3762/bjnano.7.158

• spectrum C1 (dashed line, characteristic of the dark regions), and as spectrum C2 (solid line, characteristic of the orange colored regions). The broad band centered around 290 cm−1 in spectrum C2 is attributed to amorphous antimony sulfide as in other antimony sulfide layers produced by CBD [7][16][40][41

• pyramidal crystals were present in the layer (Supporting Information File 1, Figure S1b) that according to EDX were composed of antimony and oxygen only. Such Sb2O3 crystals have also been reported to be present after annealing the CBD-grown antimony sulfide films at 300 °C [44]. Indeed, the lowering of the

• CSP without the post-deposition heat treatment stage, yielding solar cell conversion efficiencies up to 1.9% when coupled with a planar TiO2 layer, also grown by spray in air. Results and Discussion Influence of the molar ratio of the precursors on phase composition and morphology of the antimony

Determination of Young’s modulus of Sb₂S₃ nanowires by in situ resonance and bending methods

• Liga Jasulaneca,
• Raimonds Meija,
• Alexander I. Livshits,
• Juris Prikulis,
• Subhajit Biswas,
• Justin D. Holmes and
• Donats Erts

Beilstein J. Nanotechnol. 2016, 7, 278–283, doi:10.3762/bjnano.7.25

• sulfide; in situ; mechanical properties; nanowires; Young’s modulus; Introduction Antimony sulfide or stibnite is a highly anisotropic semiconductor material with potential applications in thermoelectric and optoelectronic [1][2] devices due to its high achievable thermoelectric power and

• cross section of nanowires. The results obtained from the two methods are consistent and show that nanowires exhibit Young’s moduli comparable to the value for macroscopic material. An increasing trend of measured values of Young’s modulus is observed for smaller thickness samples. Keywords: antimony

Nanostructure sensitization of transition metal oxides for visible-light photocatalysis

• Hongjun Chen and
• Lianzhou Wang

Beilstein J. Nanotechnol. 2014, 5, 696–710, doi:10.3762/bjnano.5.82

• photosensitization of nanoporous titanium dioxide, zinc oxide, tin dioxide, niobium oxide, and tantalum oxide by quantum-sized cadmium sulfide, lead sulfide, silver sulfide, antimony sulfide, and bismuth sulfide. They found that the photocurrent quantum yields of these photosensitized transition metal oxides can be