Advanced hybrid nanomaterials

• Andreas Taubert,
• Fabrice Leroux,
• Pierre Rabu and
• Verónica de Zea Bermudez

Beilstein J. Nanotechnol. 2019, 10, 2563–2567, doi:10.3762/bjnano.10.247

• individual building blocks as well as between different materials. Moreover, the implementation of hybrid systems in devices implies miniaturization. Therefore, nanostructuration or nanoarchitectonics is the core of current research in hybrid materials, and the analysis of advanced hybrid materials needs

• nanostructuration and related issues. Nanofillers Nanocomposites remain a vast playground for research into new hybrid systems. A common approach for polymer fillers presented in this thematic issue is their use as organo-modified layered double hydroxides (LDHs) or new layered calcium phenylphosphonates, as well

Self-assembly of a terbium(III) 1D coordination polymer on mica

• Quentin Evrard,
• Giuseppe Cucinotta,
• Felix Houard,
• Guillaume Calvez,
• Yan Suffren,
• Carole Daiguebonne,
• Olivier Guillou,
• Andrea Caneschi,
• Matteo Mannini and
• Kevin Bernot

Beilstein J. Nanotechnol. 2019, 10, 2440–2448, doi:10.3762/bjnano.10.234

• (375 µs) and the CHCl3 solution (13 µs) further reinforces the idea of water-induced growth. Keywords: atomic force microscopy (AFM); luminescence; nanostructuration; polymer; self-assembly; surface; terbium complexes; Introduction The study of materials for the realization of novel magnetic [1][2][3

Low cost tips for tip-enhanced Raman spectroscopy fabricated by two-step electrochemical etching of 125 µm diameter gold wires

• Antonino Foti,
• Francesco Barreca,
• Enza Fazio,
• Cristiano D’Andrea,
• Paolo Matteini,
• Onofrio Maria Maragò and
• Pietro Giuseppe Gucciardi

Beilstein J. Nanotechnol. 2018, 9, 2718–2729, doi:10.3762/bjnano.9.254

• tip [29][30]. TERS tips are nowadays produced by the chemical/electrochemical etching of metal wires [31][32][33][34][35], metal coatings of AFM tips [36][37][38], electroless deposition, [39] galvanic displacement [40] or by advanced nanostructuration techniques such as electron beam induced

A scanning probe microscopy study of nanostructured TiO₂/poly(3-hexylthiophene) hybrid heterojunctions for photovoltaic applications

• Laurie Letertre,
• Roland Roche,
• Olivier Douhéret,
• Hailu G. Kassa,
• Denis Mariolle,
• Nicolas Chevalier,
• Łukasz Borowik,
• Philippe Dumas,
• Benjamin Grévin,
• Roberto Lazzaroni and
• Philippe Leclère

Beilstein J. Nanotechnol. 2018, 9, 2087–2096, doi:10.3762/bjnano.9.197

• can easily form nanostructures, such as nanoporous layers, nanowires or nanocolumns [5][11][12]. Because of its large band gap (3.2 eV [13]), light absorption is carried out by an organic or inorganic dye. The nanostructuration of the acceptor material is crucial for the cell performance [11], as it

• allows increasing the specific surface of the layer to enhance the amount of grafted dye, and thereby, the photon absorption yield. Nanostructuration is also likely to improve the conductivity of TiO2 [14]. Because of the influence of the nanostructuration of TiO2 on the optoelectronic properties of the

• vertically aligned nanostructuration of TiO2 also makes this system attractive, since it ensures direct percolation paths for the photogenerated electrons from the donor–acceptor interface to the cathode, while providing a simple, controlled and ordered architecture. Furthermore, studies are available in

Synthesis of [Fe(L_eq)(L_ax)]_n coordination polymer nanoparticles using blockcopolymer micelles

• Christoph Göbel,
• Ottokar Klimm,
• Florian Puchtler,
• Sabine Rosenfeldt,
• Stephan Förster and
• Birgit Weber

Beilstein J. Nanotechnol. 2017, 8, 1318–1327, doi:10.3762/bjnano.8.133

• [21][40][41][42][43]. This is most likely due to a loss of the crystallinity of the particles. Especially SCO complexes are highly sensitive to small changes in the crystal packing and thus excellently suited to investigate the impact of nanostructuration of the material. In our recent work [13] we

Optimized design of a nanostructured SPCE-based multipurpose biosensing platform formed by ferrocene-tethered electrochemically-deposited cauliflower-shaped gold nanoparticles

• Wicem Argoubi,
• Maroua Saadaoui,
• Sami Ben Aoun and
• Noureddine Raouafi

Beilstein J. Nanotechnol. 2015, 6, 1840–1852, doi:10.3762/bjnano.6.187

• ; nanotechnology; optimized design; screen-printed carbon electrode (SPCE) nanostructuration; Introduction Simplicity of design, cost-effectiveness and lightweight are among the most important requirements for the design of devices that can be used for the development of on-site analytical methods [1][2][3

• /growth mechanism [20]. To the best of our knowledge, this is the first case where the nanostructuration is systemically studied in order to optimize the electrodeposition procedure. The gold electrodeposition on SPCE allowed us to obtain a modified electrode with an active surface as large as that of a

• reduction peak appearing at ca. 0.6 V [21][22][23], thus providing proofs of the formation of gold nanoparticles onto the SPCE (cf. Figure 2b). This is further supported by SEM images (Figure 2d–g) and EDX analysis (Figure 2c) confirming that the nanostructuration provokes the formation of small gold

Towards bottom-up nanopatterning of Prussian blue analogues

• Virgile Trannoy,
• Marco Faustini,
• David Grosso,
• Sandra Mazerat,
• François Brisset,
• Alexandre Dazzi and
• Anne Bleuzen

Beilstein J. Nanotechnol. 2014, 5, 1933–1943, doi:10.3762/bjnano.5.204

• reactions in solution. The sol–gel transition allows one to obtain the oxide in any desired shape including films, fibers, monolithes [10]. Furthermore, the addition of self-assembling liquid crystalline templates to the sol can lead to the ordered nanostructuration of the oxide matrix [11]. Thus