Transition from freestanding SnO₂ nanowires to laterally aligned nanowires with a simulation-based experimental design

• Jasmin-Clara Bürger,
• Sebastian Gutsch and
• Margit Zacharias

Beilstein J. Nanotechnol. 2020, 11, 843–853, doi:10.3762/bjnano.11.69

• volumetric flow leads to a higher species dilution. Based on our numerical results, we were able to successfully grow laterally aligned SnO2 nanowires out of gold film edges and gold nanoparticles on a-plane sapphire substrates. In our experiments a horizontal 2-zone tube furnace was used. The generation of

• laterally aligned nanowires, indicating that the nanowire growth takes place in a transient period of the gas exchange. Keywords: finite element method simulation; laterally aligned nanowires; planar growth; tin oxide; vapor–liquid–solid nanowire growth; Introduction Since the first reports in 1964 by

• Wagner and Ellis about the possibility to use a vapor–liquid–solid (VLS) process to grow semiconductor nanowires (NWs), significant work has been published on the production of nanowires [1][2]. It was demonstrated that NWs of different materials can be grown on different substrates and can be

Electromigration-induced directional steps towards the formation of single atomic Ag contacts

• Atasi Chatterjee,
• Christoph Tegenkamp and
• Herbert Pfnür

Beilstein J. Nanotechnol. 2020, 11, 680–687, doi:10.3762/bjnano.11.55

• to see that the contribution from 0.8, i.e., thinning in the [110] direction, is absent in these structures. This result contrasts with a MCBJ experiment using Au nanowires [21], in which all three frequencies were obtained. It matches, however, with the findings of mechanical stretching experiments

• of Ag nanowires, observed with HRTEM [32], where it was reported that Ag mostly forms rod-like structures along the [110] direction, which are unable to form wires. Atomic chains turned out to form only when at least one grain was oriented in the [100] direction. The dominant peak at 1 in Figure 3

Nanoarchitectonics: bottom-up creation of functional materials and systems

• Katsuhiko Ariga

Beilstein J. Nanotechnol. 2020, 11, 450–452, doi:10.3762/bjnano.11.36

• , the chiral structure was found to control the self-assembly of nitrocinnamic amide amphiphiles [25]. Works related to the formation of higher-dimensional materials included, for example, the self-assembly of crystalline cellulose oligomers that resulted in nanoribbon networks [26], silicon nanowires

High dynamic resistance elements based on a Josephson junction array

• Konstantin Yu. Arutyunov and
• Janne S. Lehtinen

Beilstein J. Nanotechnol. 2020, 11, 417–420, doi:10.3762/bjnano.11.32

• field, the low current bias dynamic resistance can reach values of ≈1011 Ω. It was demonstrated that the system can provide a decent quality current biasing circuit, enabling the observation of Coulomb blockade and Bloch oscillations in ultra-narrow Ti nanowires associated with the quantum phase-slip

• effect. Keywords: dynamic resistance; Josephson junction array; nanoelectronics; quantum phase slip; superconductivity; Ti nanowires; Introduction The field of modern nanoelectronics is facing stagnation with respect to further miniaturization, deviating from Moore’s law [1]. Typically, two main reason

• . The SIS junction chain has been used to current bias narrow Ti nanowires [12], with cross sections demonstrating various phenomena attributed to the QPS effect [10][26][27][28][29][30][31][32][33]. The observation of Coulomb blockade and Bloch steps [12] confirms the usefulness of the suggested

Formation of nanoripples on ZnO flat substrates and nanorods by gas cluster ion bombardment

• Xiaomei Zeng,
• Vasiliy Pelenovich,
• Bin Xing,
• Rakhim Rakhimov,
• Wenbin Zuo,
• Alexander Tolstogouzov,
• Chuansheng Liu,
• Dejun Fu and
• Xiangheng Xiao

Beilstein J. Nanotechnol. 2020, 11, 383–390, doi:10.3762/bjnano.11.29

• of semiconductor quantum dots [2]. Arrays of metallic nanoparticles or nanowires aligned on dielectric surfaces with nanoripples are ideal for research on plasmonics [3]. Ag nanoparticle arrays created on rippled silicon surfaces have demonstrated excellent sensing of molecules through surface

Nonclassical dynamic modeling of nano/microparticles during nanomanipulation processes

• Moharam Habibnejad Korayem,
• Ali Asghar Farid and
• Rouzbeh Nouhi Hefzabad

Beilstein J. Nanotechnol. 2020, 11, 147–166, doi:10.3762/bjnano.11.13

• experimental results were consistent with their proposed algorithm [21]. Wu et al. studied the automated manipulation of flexible nanowires using AFM. Although the automated manipulation of solid nanoparticles was already investigated, it was not generalizable to flexible nanowires due to the complexity of

• flexible behavior. Also, for manipulating multiple nanowires, they presented a method based on graph theory that saved significant time owing to being independent from intermediate scanning [22]. Mahdjour Firouzi et al. tried to simulate the manipulation of biological nanoparticles using molecular dynamics

Molecular architectonics of DNA for functional nanoarchitectures

• Debasis Ghosh,
• Lakshmi P. Datta and
• Thimmaiah Govindaraju

Beilstein J. Nanotechnol. 2020, 11, 124–140, doi:10.3762/bjnano.11.11

• of ‘raspberry‐like’ particles with potential gene delivery application [99]. The novelty of the ‘raspberry-like’ structures lay in their biocompatible ‘shield’, which protected the capped DNA from enzymatic degradation. Gianneschi and co-workers documented the synthesis of crystalline gold nanowires

The effect of heat treatment on the morphology and mobility of Au nanoparticles

• Sven Oras,
• Sergei Vlassov,
• Simon Vigonski,
• Boris Polyakov,
• Mikk Antsov,
• Vahur Zadin,
• Rünno Lõhmus and
• Karine Mougin

Beilstein J. Nanotechnol. 2020, 11, 61–67, doi:10.3762/bjnano.11.6

• , is annealing time. We believe that the surface effects resulting in the rounding of the NPs are due to energy minimization via a rearrangement of surface atoms, similar to the effect demonstrated recently by Vigonski et al. [17] for heat-induced segmentation of Au nanowires at temperatures much below

Label-free highly sensitive probe detection with novel hierarchical SERS substrates fabricated by nanoindentation and chemical reaction methods

• Jingran Zhang,
• Tianqi Jia,
• Yongda Yan,
• Li Wang,
• Peng Miao,
• Yimin Han,
• Xinming Zhang,
• Guangfeng Shi,
• Yanquan Geng,
• Zhankun Weng,
• Daniel Laipple and
• Zuobin Wang

Beilstein J. Nanotechnol. 2019, 10, 2483–2496, doi:10.3762/bjnano.10.239

• with increase in the corrosion time in AgNO3 solution, as shown in Figure 2a,b. The Raman intensity can be enhanced further due to the formation of nanoclusters. Other scholars have already obtained similar conclusions [10][17][32]. Copper nanowires were soaked in AgNO3 solution by Wang et al. [10]. A

Abrupt elastic-to-plastic transition in pentagonal nanowires under bending

• Sergei Vlassov,
• Magnus Mets,
• Boris Polyakov,
• Jianjun Bian,
• Leonid Dorogin and
• Vahur Zadin

Beilstein J. Nanotechnol. 2019, 10, 2468–2476, doi:10.3762/bjnano.10.237

• , Kengaraga 8, LV-1063, Riga, Latvia Department of Industrial Engineering, University of Padova, Via Gradenigo 6/a, 35131 Padova, Italy, Institute of Technology, University of Tartu, Nooruse 1, 50411 Tartu, Estonia 10.3762/bjnano.10.237 Abstract In this study, pentagonal Ag and Au nanowires (NWs) were bent

• flexible polymer composite materials. Keywords: finite element method; mechanical properties; molecular dynamics; nanowires; Introduction Nanostructures comprised of noble metals with face centered cubic (FCC) crystal structure (Au, Ag and Cu according to the most common physical definition) prepared via

• soft chemical colloidal techniques often demonstrate a morphology with axes of five-fold (pentagonal) symmetry [1]. Depending on the synthesis conditions such structures can be synthesized in the form of 0D nanoparticles or high-aspect ratio 1D nanowires (NWs) with pentagonal cross-section [2][3]. The

Self-assembly of a terbium(III) 1D coordination polymer on mica

• Quentin Evrard,
• Giuseppe Cucinotta,
• Felix Houard,
• Guillaume Calvez,
• Yan Suffren,
• Carole Daiguebonne,
• Olivier Guillou,
• Andrea Caneschi,
• Matteo Mannini and
• Kevin Bernot

Beilstein J. Nanotechnol. 2019, 10, 2440–2448, doi:10.3762/bjnano.10.234

• tungsten oxide nanowires assembled on mica [21]. Insights are provided to link this ordering to the one observed in crystalline bulk [Tb(hfac)3·2H2O]n [22]. We also demonstrate that the luminescent and magnetic properties of the pristine compound are preserved on the surface, thus confirming the nature of

• suitable for atomic force microscopy (AFM) imaging [24] as well as for its hydrophilic nature promoting the interaction with the deposited molecules. Indeed, muscovite mica has already been used for the deposition of magnetic materials such as FeCoN magnetic films [25] or tungsten oxide nanowires [21]. The

• ceric oxide [38] surfaces and is favored by the presence of moisture [35]. As far as surface deposits are concerned, the epitaxial orientation of tungsten oxide (WO3) nanowires upon deposition on air-cleaved mica [21] has been linked to the formation of K2CO3 acting as a precursor for the pure WO3

A novel all-fiber-based LiFePO₄/Li₄Ti₅O₁₂ battery with self-standing nanofiber membrane electrodes

• Li-li Chen,
• Hua Yang,
• Mao-xiang Jing,
• Chong Han,
• Fei Chen,
• Xin-yu Hu,
• Wei-yong Yuan,
• Shan-shan Yao and
• Xiang-qian Shen

Beilstein J. Nanotechnol. 2019, 10, 2229–2237, doi:10.3762/bjnano.10.215

• . Nanostructures of various shapes such as nanofibers [27][28], nanoparticles [29], nanotubes [30], nanowires [31], and nanosheets [32] can greatly shorten the conduction path of Li+, thus improving the Li+ conductivity. In addition, coating or blending with conductive carbon can significantly increase the

The importance of design in nanoarchitectonics: multifractality in MACE silicon nanowires

• Stefania Carapezzi and
• Anna Cavallini

Beilstein J. Nanotechnol. 2019, 10, 2094–2102, doi:10.3762/bjnano.10.204

• design through suited statistical analysis tools. Results: We have investigated the self-assembly bundling process of nanowires fabricated by metal-assisted chemical etching (MACE). First, we have applied theoretical models in order to obtain a quantitative estimation of the driving forces leading to

• conditions and the capacity dimension of the nanowires was obtained. Keywords: atomic force microscopy (AFM); capillary force; metal-assisted chemical etching (MACE); multifractal analysis; nanoarchitectonics; nanowires; self-assembly; Introduction In the last years, huge progress was made regarding the

• technological advantage is that in comparison to the nanoscaled units these self-organized assemblies possess new functionalities. Atoms, molecules, or even nanoparticles or nanowires (NWs) can be used as basic units to self-arrange in new wholes. NWs are among the most widely investigated nanoscaled objects

Synthesis of highly active ETS-10-based titanosilicate for heterogeneously catalyzed transesterification of triglycerides

• Muhammad A. Zaheer,
• David Poppitz,
• Khavar Feyzullayeva,
• Marianne Wenzel,
• Jörg Matysik,
• Radomir Ljupkovic,
• Aleksandra Zarubica,
• Alexander A. Karavaev,
• Andreas Pöppl,
• Roger Gläser and
• Muslim Dvoyashkin

Beilstein J. Nanotechnol. 2019, 10, 2039–2061, doi:10.3762/bjnano.10.200

• high crystallinity of Na,K-ETS-10 is further confirmed by TEM (Figure 6) demonstrating high order of the titanosilicate framework with parallel Ti nanowires showing no visible defects on the length scale of hundreds of nanometers. The spacing between adjacent nanowires showed good agreement with

TiO₂/GO-coated functional separator to suppress polysulfide migration in lithium–sulfur batteries

• Ning Liu,
• Lu Wang,
• Taizhe Tan,
• Yan Zhao and
• Yongguang Zhang

Beilstein J. Nanotechnol. 2019, 10, 1726–1736, doi:10.3762/bjnano.10.168

• synthesized by selectively dissolving Al atoms from a Ti10Al90 alloy. It can be readily observed that the abundant nanowires and uniform nanopores, with a pore size of ≈40 nm, formed a sea-urchin-like structure. Furthermore, the energy-dispersive X-ray spectroscopy (EDS) analysis confirms the homogenous

• distribution of Ti and O elements (Figure 3b). In addition, the transmission electron microscopy (TEM) image of TiO2 shows the nanoporous architecture with dark nanowires and bright nanopores (Figure 3c). On the other hand, the SEM and TEM images of the as-prepared TiO2/GO composite show that the surface of

Kelvin probe force microscopy work function characterization of transition metal oxide crystals under ongoing reduction and oxidation

• Dominik Wrana,
• Karol Cieślik,
• Wojciech Belza,
• Christian Rodenbücher,
• Krzysztof Szot and
• Franciszek Krok

Beilstein J. Nanotechnol. 2019, 10, 1596–1607, doi:10.3762/bjnano.10.155

• characterization of the work function using the example of artificially formed crystalline titanium monoxide (TiO) nanowires on strontium titanate (SrTiO3) surfaces, providing a sharp atomic interface. The measured value of 3.31(21) eV is the first experimental work function evidence for a cubic TiO phase, where

• significant variations among the different crystallographic facets were also observed. Despite the remarkable height of the TiO nanowires, KPFM was implemented to achieve a high lateral resolution of 15 nm, which is close to the topographical limit. In this study, we also show the unique possibility of

• . Keywords: Kelvin probe force microscopy (KPFM); reduction and oxidation; SrTiO3; TiO nanowires; TiO/SrTiO3 heterostructure; transition metal oxides; work function; Introduction Transition metal oxides are viewed today as some of the most promising materials in various fields, ranging from (photo)catalysis

Materials nanoarchitectonics at two-dimensional liquid interfaces

• Katsuhiko Ariga,
• Michio Matsumoto,
• Taizo Mori and
• Lok Kumar Shrestha

Beilstein J. Nanotechnol. 2019, 10, 1559–1587, doi:10.3762/bjnano.10.153

• –Blodgett method, liquid–liquid interfacial precipitation, instructed assembly, and layer-by-layer assembly to give low-dimensional materials including nanowires, nanowhiskers, nanosheets, cubic objects, molecular patterns, supramolecular polymers, metal-organic frameworks and covalent organic frameworks

• nanoarchitectonics (controlled single atom/ion transfer) to regulate the number of dopant atoms in one-dimensional solid electrolyte nanodots (α-Ag2+δS) [127]. The nanoarchitectonic construction of one-dimensional nanowires from II–VI semiconductors was demonstrated for the use as wavelength division multiplexer as

• exhibit interesting properties [209][210][211][212][213][214][215]. Such materials can be also nano-engineered at liquid interfaces. Niederberger and co-workers successfully fabricated two-dimensionally aligned arrays of one-dimensional W18O49 nanowires and used them for H2-sensing at room temperature

Selective gas detection using Mn₃O₄/WO₃ composites as a sensing layer

• Yongjiao Sun,
• Zhichao Yu,
• Wenda Wang,
• Pengwei Li,
• Gang Li,
• Wendong Zhang,
• Lin Chen,
• Serge Zhuivkov and
• Jie Hu

Beilstein J. Nanotechnol. 2019, 10, 1423–1433, doi:10.3762/bjnano.10.140

• [16]. The blue-colored precursor was first oxidized into faint-yellow-colored WO3 nanowires, and then re-crystallized to nanoparticles or nanorods of larger size with less grain boundaries in order to reduce the free energy. Furthermore, with the increase of the amount of Mn, the proportion of

Gas sensing properties of individual SnO₂ nanowires and SnO₂ sol–gel nanocomposites

• Alexey V. Shaposhnik,
• Dmitry A. Shaposhnik,
• Sergey Yu. Turishchev,
• Olga A. Chuvenkova,
• Stanislav V. Ryabtsev,
• Alexey A. Vasiliev,
• Xavier Vilanova,
• Francisco Hernandez-Ramirez and
• Joan R. Morante

Beilstein J. Nanotechnol. 2019, 10, 1380–1390, doi:10.3762/bjnano.10.136

• selectivity to target gases. The aim of this work is the comparison of gas sensing properties of tin dioxide in the form of individual nanowires and nanopowders obtained by sol–gel synthesis. This comparison is necessary because the traditional synthesis procedures of small particle, metal oxide materials

• seem to be approaching their limit. Because of this, there is increasing interest in the fabrication of functional materials based on nanowires, i.e., quasi-one-dimensional objects. In this work, nanocrystalline tin dioxide samples with different morphology were synthesized. The gas-transport method

• was used for the fabrication of well-faceted wire-like crystals with diameters ranging between 15–100 nm. The sol–gel method allowed us to obtain fragile gels from powders with grain sizes of about 5 nm. By means of X-ray photoelectron spectroscopy (XPS) it was proven that the nanowires contain

Multicomponent bionanocomposites based on clay nanoarchitectures for electrochemical devices

• Giulia Lo Dico,
• Bernd Wicklein,
• Lorenzo Lisuzzo,
• Giuseppe Lazzara,
• Pilar Aranda and
• Eduardo Ruiz-Hitzky

Beilstein J. Nanotechnol. 2019, 10, 1303–1315, doi:10.3762/bjnano.10.129

• nanofillers to ensure the mechanical strength and electrical conductivity of the prepared bionanocomposite films and foams [26]. Moreover, MWCNTs are supposed to act as nanowires improving the contact between the active site of the immobilized enzymes and an electrode surface via direct electron transfer [39

• (1000–2500 S·m−1 [14][15]). The high in-plane conductivity found here can be attributed to a synergic effect of MWCNTs and the lamellar assembly of graphene nanoplatelets in the plane of the film as observed by SEM (see Figure 3F). The MWCNTs act as nanowires connecting the GNPs, which facilitates the

Green fabrication of lanthanide-doped hydroxide-based phosphors: Y(OH)₃:Eu³⁺ nanoparticles for white light generation

• Tugrul Guner,
• Anilcan Kus,
• Mehmet Ozcan,
• Aziz Genc,
• Hasan Sahin and
• Mustafa M. Demir

Beilstein J. Nanotechnol. 2019, 10, 1200–1210, doi:10.3762/bjnano.10.119

• nanowires. The level of doping for Y(OH)3:7.5% Eu3+ phosphors produced at 5 min was captured through an annular dark field (ADF) STEM micrograph and the STEM-EELS analysis of the indicated area is presented in Figure 3. Elemental composition maps of Y (red) and Eu (green) along with their composites are

• ≈10 nm thick nanowires. Annular dark field (ADF) STEM micrograph of an agglomerate of nanoparticles synthesized at 5 min with 7.5% doping ratio. STEM-EELS elemental composition maps of the area indicated with a white rectangle: Y (in red) and Eu (in green) maps along with their composite image. (a

Pure and mixed ordered monolayers of tetracyano-2,6-naphthoquinodimethane and hexathiapentacene on the Ag(100) surface

• Robert Harbers,
• Timo Heepenstrick,
• Dmitrii F. Perepichka and
• Moritz Sokolowski

Beilstein J. Nanotechnol. 2019, 10, 1188–1199, doi:10.3762/bjnano.10.118

• ]. These authors [20][21] also noted that HTPEN is a one-dimensional semiconductor when it is synthesized in the form of nanowires. These nanowires exhibit a molecular structure similar to that of the bulk crystal with the primary growth direction along the [100] direction. These wires are considered to

Electroluminescence and current–voltage measurements of single-(In,Ga)N/GaN-nanowire light-emitting diodes in a nanowire ensemble

• David van Treeck,
• Johannes Ledig,
• Gregor Scholz,
• Jonas Lähnemann,
• Mattia Musolino,
• Abbes Tahraoui,
• Oliver Brandt,
• Andreas Waag,
• Henning Riechert and
• Lutz Geelhaar

Beilstein J. Nanotechnol. 2019, 10, 1177–1187, doi:10.3762/bjnano.10.117

• ensemble is mandatory. In order to characterize NW-ensemble LEDs in depth, a combined analysis of the emission and transport behavior of single NWs under electrical carrier injection is needed. One way to do such a combined analysis is to remove the nanowires from the ensemble, disperse them on a substrate

Photoactive nanoarchitectures based on clays incorporating TiO₂ and ZnO nanoparticles

• Eduardo Ruiz-Hitzky,
• Pilar Aranda,
• Marwa Akkari,
• Nithima Khaorapapong and
• Makoto Ogawa

Beilstein J. Nanotechnol. 2019, 10, 1140–1156, doi:10.3762/bjnano.10.114

• reactivity can be modified [48][49]. TiO2 and ZnO NPs with different shapes, sizes and exposed crystal facets were assembled to yield hollow particles, fibers, nanosheets, nanowires, nanorods, nanoflowers and nanobelts through various synthesis routes including template synthesis [50][51][52][53

Tailoring the stability/aggregation of one-dimensional TiO₂(B)/titanate nanowires using surfactants

• Atiđa Selmani,
• Johannes Lützenkirchen,
• Kristina Kučanda,
• Dario Dabić,
• Engelbert Redel,
• Ida Delač Marion,
• Damir Kralj,
• Darija Domazet Jurašin and
• Maja Dutour Sikirić

Beilstein J. Nanotechnol. 2019, 10, 1024–1037, doi:10.3762/bjnano.10.103

• Zagreb, Croatia 10.3762/bjnano.10.103 Abstract The increased utilization of one-dimensional (1D) TiO2 and titanate nanowires (TNWs) in various applications was the motivation behind studying their stability in this work, given that stability greatly influences both the success of the application and the

• . Keywords: 1D nanomaterials; cationic surfactants; stability; surface complexation model; titanate nanowires; Introduction Among the extensive variety of metal oxide nanomaterials, titanium dioxide nanomaterials (TNMs) (e.g., anatase, rutile, TiO2(B) and titanate) have attracted considerable attention

• and in the presence of different additives [12][20][21][22], much less is known about 1D TNMs, such as titanium oxide nanotubes (TNTs), titanium oxide nanowires (TNWs) and titanium oxide nanorods (TNRs). As shown previously, the morphology of TNMs is expected to play a significant role in their