The high potential of methyl laurate as a recyclable competitor to conventional toxic solvents in [3 + 2] cycloaddition reactions

• Ayhan Yıldırım and
• Mustafa Göker

Beilstein J. Org. Chem. 2025, 21, 2389–2415, doi:10.3762/bjoc.21.184

• different sources [4][5]. In order to fulfil this requirement, a considerable number of green solvents of various classes have been developed for a range of applications, including the extraction of natural compounds [6][7][8][9], food analysis [10][11][12], pharmacology [13][14][15], and organic synthesis

• -cyclodextrin [123]. An attempt was made to synthesize compound 3a in water under the reaction conditions specified in Table 1, entry 10. TLC analysis after 10 minutes revealed the presence of the starting nitrone in the reaction medium. The isolation of the product was achieved through extraction with EtOAc

Conformational effects on iodide binding: a comparative study of flexible and rigid carbazole macrocyclic analogs

• Guang-Wei Zhang,
• Yong Zhang,
• Le Shi,
• Chuang Gao,
• Hong-Yu Li and
• Lei Xue

Beilstein J. Org. Chem. 2025, 21, 2369–2375, doi:10.3762/bjoc.21.181

• by enabling dynamic host–guest complementarity. Such insights are critical for designing adaptive receptors for applications like environmental sensing or selective ion extraction. Conclusion In summary, two carbazole-based macrocyclic structural analogs (PBG and WDG) were synthesized via a

Rotaxanes with integrated photoswitches: design principles, functional behavior, and emerging applications

• Jullyane Emi Matsushima,
• Khushbu,
• Zuliah Abdulsalam,
• Udyogi Navodya Kulathilaka Conthagamage and
• Víctor García-López

Beilstein J. Org. Chem. 2025, 21, 2345–2366, doi:10.3762/bjoc.21.179

• for applications in anion transport, extraction, and separation technologies. Conclusion and Perspectives The development of photoswitchable rotaxanes has mainly focused on controlling the position and movement of the macrocycle along the axle. Consequently, the vast majority of systems reported to

Preparation of spirocyclic oxindoles by cyclisation of an oxime to a nitrone and dipolar cycloaddition

• Beth L. Ritchie,
• Alexandra Longcake and
• Iain Coldham

Beilstein J. Org. Chem. 2025, 21, 1890–1896, doi:10.3762/bjoc.21.146

• is in part due to limitations in the quantities obtained in the extraction processes. Other selected examples shown in Figure 1 all contain the same spirocyclic oxindole with a bridged azabicyclo[3.2.1]octane moiety. Several methods to access spirocyclic oxindole alkaloids have been reported [7][8][9

Chiral phosphoric acid-catalyzed asymmetric synthesis of helically chiral, planarly chiral and inherently chiral molecules

• Wei Liu and
• Xiaoyu Yang

Beilstein J. Org. Chem. 2025, 21, 1864–1889, doi:10.3762/bjoc.21.145

• Wei Liu Xiaoyu Yang Key Laboratory of Subcritical High-Efficiency Extraction, College of Chemistry and Environmental Engineering, Anyang Institute of Technology, Anyang, Henan 455000, China School of Physical Science and Technology, ShanghaiTech University, Shanghai 201210, China 10.3762/bjoc

Continuous-flow-enabled intensification in nitration processes: a review of technological developments and practical applications over the past decade

• Feng Zhou,
• Chuansong Duanmu,
• Yanxing Li,
• Jin Li,
• Haiqing Xu,
• Pan Wang and
• Kai Zhu

Beilstein J. Org. Chem. 2025, 21, 1678–1699, doi:10.3762/bjoc.21.132

• to achieve precise control of residence time, which is a key advantage of flow-chemistry technology. Conventional mixed-acid nitration systems utilize aqueous streams to rapidly deactivate nitration activity, necessitating simultaneous heat extraction to mitigate the substantial exothermic energy

Synthesis of an aza[5]helicene-incorporated macrocyclic heteroarene via oxidation of an o-phenylene-pyrrole-thiophene icosamer

• Yusuke Matsuo,
• Aoi Nakagawa,
• Shu Seki and
• Takayuki Tanaka

Beilstein J. Org. Chem. 2025, 21, 1561–1567, doi:10.3762/bjoc.21.119

• acyclic heteroaromatics [26][27]. Thus, to a solution of 4 in CH2Cl2 was added 15 equivalents of PIFA at −78 °C and stirred for 3 h. The mixture was then allowed to warm to room temperature to give a dark solution. The system was worked-up with NaBH4/MeOH for 10 minutes followed by extraction with CH2Cl2

Microwave-enhanced additive-free C–H amination of benzoxazoles catalysed by supported copper

• Andrei Paraschiv,
• Valentina Maruzzo,
• Filippo Pettazzi,
• Stefano Magliocco,
• Paolo Inaudi,
• Daria Brambilla,
• Gloria Berlier,
• Giancarlo Cravotto and
• Katia Martina

Beilstein J. Org. Chem. 2025, 21, 1462–1476, doi:10.3762/bjoc.21.108

• are required to remove copper salts, and aqueous ammonia has been used to improve the efficacy of liquid–liquid extraction (see Supporting Information File 1 and experimental procedure). This issue made liquid–liquid extraction time-consuming and wasteful, while chromatographic column purification is

Gold extraction at the molecular level using α- and β-cyclodextrins

• Susana Santos Braga

Beilstein J. Org. Chem. 2025, 21, 1116–1125, doi:10.3762/bjoc.21.89

• relevant role in aerospace technology, being used in satellites [13] and telescopes [14] to protect sensitive components against the damaging effects of solar radiation. Production of gold encompasses the mining stage, followed by one more processing steps. Post-extraction processing can be carried out by

• accumulation in soil and water [17]. The shortage of natural resources in tandem with the increasing market demand for gold are driving the need to obtain this commodity from low grade ores, typically containing less than 1 wt % in gold, materials of difficult extraction, such as the gold-bearing silicates and

• -waste [21], or to acidophilic microbes such as chemolithotrophic bacteria and archaea, which can accelerate the oxidative dissolution of gold sulfides in a biotechnological extraction process suited for sulfidic ores [22]. Microbial leaching methods are not, however, implemented at the industrial scale

Unraveling cooperative interactions between complexed ions in dual-host strategy for cesium salt separation

• Zhihua Liu,
• Ya-Zhi Chen,
• Ji Wang,
• Qingling Nie,
• Wei Zhao and
• Biao Wu

Beilstein J. Org. Chem. 2025, 21, 845–853, doi:10.3762/bjoc.21.68

• L as an anion receptor to extract cesium salts (chloride, nitrate, carbonate, sulfate, and phosphate) from the solid phase into chloroform. Remarkably, Cs3PO4 exhibits the highest extraction efficiency, driven by strong cooperative interactions involving ion-dipole coordination between Cs+ and

• dual-host systems for selective ion separation. Keywords: anion binding; cesium extraction; dual-host strategy; ion-pair interaction; solid–liquid extraction; Introduction Ion-pair interaction, defined as the electrostatic attraction between a positively charged cation and a negatively charged anion

• binding. Compared to the use of individual anion or cation receptors, the dual-host strategy can significantly enhance the efficiency of ion-pair extraction. However, the driving forces and cooperative interactions of the complexed ions remain poorly understood (Figure 1a). To the best of our knowledge

Semisynthetic derivatives of massarilactone D with cytotoxic and nematicidal activities

• Rémy B. Teponno,
• Sara R. Noumeur and
• Marc Stadler

Beilstein J. Org. Chem. 2025, 21, 607–615, doi:10.3762/bjoc.21.48

• -trans-cinnamoyl, these results suggested that massarilactone H could be an artifact formed during the extraction/isolation of massarilactone D. The molecular formula of compound 4 was deduced to be C38H32O9 from its HRESIMS spectrum (Figure S19, Supporting Information File 1) which showed the protonated

• with cinnamoyl chloride suggests that these two polyketides can interconvert from each other and could be artifacts and vice versa formed during extraction and isolation. This finding suggests that, to improve the antiproliferative efficacy of these derivatives, the exo-methylene group should be

Deep-blue emitting 9,10-bis(perfluorobenzyl)anthracene

• Long K. San,
• Sebastian Balser,
• Brian J. Reeves,
• Tyler T. Clikeman,
• Yu-Sheng Chen,
• Steven H. Strauss and
• Olga V. Boltalina

Beilstein J. Org. Chem. 2025, 21, 515–525, doi:10.3762/bjoc.21.39

• the reaction with Na2S2O3 resulted in a 2:1 mixture of 9-Br-10-BnF-ANTH and 9,10-ANTH(BnF)2 with no remaining 9,10-ANTH(Br)2. However, the high boiling point of PhCN and its miscibility with almost every solvent that could be used for liquid–liquid extraction made the determination of isolated yields

Identification and removal of a cryptic impurity in pomalidomide-PEG based PROTAC

• Bingnan Wang,
• Yong Lu and
• Chuo Chen

Beilstein J. Org. Chem. 2025, 21, 407–411, doi:10.3762/bjoc.21.28

• of iVeliparib. The UV trace of the initially purified iVeliparib-AP6 and the MS ion extraction traces of the desired product and the byproduct 5 on HPLC. The structures of 6 and 7 and the MS ion extraction traces of 3, 4, 6, and 7 from HPLC analysis of the reaction mixtures after purification by

The effect of neighbouring group participation and possible long range remote group participation in O-glycosylation

• Rituparna Das and
• Balaram Mukhopadhyay

Beilstein J. Org. Chem. 2025, 21, 369–406, doi:10.3762/bjoc.21.27

• ], cosmetics, and detergents. Carbohydrates are the most abundant and versatile renewable sources of energy on earth. However, extraction of naturally occurring complex glycans from natural sources is a laborious and cumbersome task. Moreover, the isolated samples provide a low-yield heterogenous mixture of

Antibiofilm and cytotoxic metabolites from the entomopathogenic fungus Samsoniella aurantia

• Rita Toshe,
• Syeda J. Khalid,
• Blondelle Matio Kemkuignou,
• Esteban Charria-Girón,
• Paul Eckhardt,
• Birthe Sandargo,
• Kunlapat Nuchthien,
• J. Jennifer Luangsa-ard,
• Till Opatz,
• Hedda Schrey,
• Sherif S. Ebada and
• Marc Stadler

Beilstein J. Org. Chem. 2025, 21, 327–339, doi:10.3762/bjoc.21.23

• isolated from a lepidopteran larva found on the leaf litter buried in the soil, on October 6, 2012. Cultivation and extraction Samsoniella aurantia was cultivated on potato dextrose agar (PDA: 200 g potato, 20 g dextrose, 15 g agar in 1 L distilled water, Difco). Mycelial plugs, each with a diameter of 7.0

• growth, the cultures underwent extraction. The mycelia were initially soaked in acetone overnight, followed by two rounds of ultrasonic extraction with freshly added acetone for each cycle. Resultant suspensions were filtered, and the liquid was collected. The combined liquid phases underwent vacuum

• evaporation at 40 °C, forming a semi-solid residue dispersed in water. Liquid–liquid extraction against EtOAc (1:1) was conducted twice. The organic phases were combined, filtered, and evaporated under vacuum, while the aqueous phase was discarded. Isolation of compounds 1–6 The obtained organic crude extract

Facile one-pot reduction of β-nitrostyrenes to phenethylamines using sodium borohydride and copper(II) chloride

• Laura D’Andrea and
• Simon Jademyr

Beilstein J. Org. Chem. 2025, 21, 39–46, doi:10.3762/bjoc.21.4

• extraction process and copper(II) removal. However, the addition of DETA led to decreased yields and a deterioration of the phase separation. It was observed that using a 20% aqueous sodium hydroxide solution, instead of 35%, negatively impacted phase separation, making the extraction process more time

• is simplified thanks to the ability of 2-propanol to partition from the sodium hydroxide aqueous solution, which allows prompt extraction of the products. Once 2-propanol is evaporated, the products can also be isolated as free amines by dissolving the residue in diethyl ether, decanting it into

Emerging trends in the optimization of organic synthesis through high-throughput tools and machine learning

• Pablo Quijano Velasco,
• Kedar Hippalgaonkar and
• Balamurugan Ramalingam

Beilstein J. Org. Chem. 2025, 21, 10–38, doi:10.3762/bjoc.21.3

• into actionable inputs for building ML models for optimization: (i) extraction and categorization of appropriate spectra; (ii) fitting of spectral peaks utilizing predefined functional models, alongside deconvolution of overlapping signals; (iii) consolidation of extracted peak information and

Intramolecular C–H arylation of pyridine derivatives with a palladium catalyst for the synthesis of multiply fused heteroaromatic compounds

• Yuki Nakanishi,
• Shoichi Sugita,
• Kentaro Okano and
• Atsunori Mori

Beilstein J. Org. Chem. 2024, 20, 3256–3262, doi:10.3762/bjoc.20.269

• efficient and selective extraction of lanthanides and actinides and, furthermore, a number of heterocycles involving pyridine rings have been reported to exhibit biological activities [14][15][16][17][18][19][20][21][22]. We have recently reported, as shown in Figure 1, that the introduction of a multiply

• fused structure toward a phenanthroline diamide (Phen-2,9-diamide) [23] can be achieved by employing a palladium-catalyzed intramolecular C–H arylation [24][25][26][27][28]. One of the thus obtained products exhibited a remarkable extraction performance for a lanthanide ion, in which a metal-specific

• extraction was found despite the similarities in the lanthanide series [23]. Chakravorty and co-workers reported that a similar arylation reaction gave access to the fused skeleton of the diamide of 2,6-pyridinedicarboxlic acid (Py-2,6-diamide) [29]. Our interest has thus turned to extend the substrate scope

Ceratinadin G, a new psammaplysin derivative possessing a cyano group from a sponge of the genus Pseudoceratina

• Shin-ichiro Kurimoto,
• Kouta Inoue,
• Taito Ohno and
• Takaaki Kubota

Beilstein J. Org. Chem. 2024, 20, 3215–3220, doi:10.3762/bjoc.20.267

• 49.8 ppm were used as internal references. Mass spectra were acquired on a JEOL JMS-T100LP spectrometer. Flash column chromatography was performed using a Biotage Isolera flash purification system. Extraction and isolation The EtOAc-soluble material (2.45 g) of the methanol extract (38.06 g) from the

Discovery of ianthelliformisamines D–G from the sponge Suberea ianthelliformis and the total synthesis of ianthelliformisamine D

• Sasha Hayes,
• Yaoying Lu,
• Bernd H. A. Rehm and
• Rohan A. Davis

Beilstein J. Org. Chem. 2024, 20, 3205–3214, doi:10.3762/bjoc.20.266

• aeruginosa biofilm inhibitors and antibiotic enhancers. Large-scale extraction and isolation studies resulted in the discovery of four new and minor natural products, ianthelliformisamines D–G (4–7) and the known steroid, aplysterol (8). Compounds 4–7 were fully characterised following 1D/2D NMR, MS and UV

• describe the large-scale extraction, isolation, and structure elucidation of four new metabolites, ianthelliformisamines D–G (4–7). Additionally, we report the isolation of the known natural products, aplysterol (8) and ianthelliformisamines A–C (1–3). Owing to the novelty of ianthelliformisamine D (4) we

• HPLC (RP-HPLC), which led to the purification of the known metabolites, ianthelliformisamines A–C (1–3) [7] and aplysterol (8) [13], and four new natural products, ianthelliformisamines D–G (4–7) (Figure 1). This extraction and isolation process was repeated twice to obtain sufficient quantities of the

Advances in the use of metal-free tetrapyrrolic macrocycles as catalysts

• Mandeep K. Chahal

Beilstein J. Org. Chem. 2024, 20, 3085–3112, doi:10.3762/bjoc.20.257

• conformational flexibility, allowing them to adopt four key conformations: 1,3-alternate, cone, partial cone, and 1,2-alternate [1][2]. Calix[4]pyrroles are one of the most studied hosts in supramolecular chemistry, finding use in applications of molecular recognition and extraction, drug delivery, ion transport

N-Glycosides of indigo, indirubin, and isoindigo: blue, red, and yellow sugars and their cancerostatic activity

• Peter Langer

Beilstein J. Org. Chem. 2024, 20, 2840–2869, doi:10.3762/bjoc.20.240

• material in Europe (Scheme 1). It is obtained by extraction and isolation of the colorless indole-O-glycoside indicane which is then hydrolyzed to give indoxyl. The latter undergoes oxidative dimerization to provide indigo. In the 19th century, syntheses of indigo were developed which made the pigment

Synthesis of benzo[f]quinazoline-1,3(2H,4H)-diones

• Ruben Manuel Figueira de Abreu,
• Peter Ehlers and
• Peter Langer

Beilstein J. Org. Chem. 2024, 20, 2708–2719, doi:10.3762/bjoc.20.228

• ). Solvents for extraction and column chromatography were distilled prior employment. Synthesis of 4a–i The synthesis of 4a–f has been previously reported. Novel derivatives 4g–i were prepared according to our previously reported procedure [65]. 1,3-Dimethyl-5-phenyl-6-(phenylethynyl)pyrimidine-2,4(1H,3H

Computational design for enantioselective CO₂ capture: asymmetric frustrated Lewis pairs in epoxide transformations

• Maxime Ferrer,
• Iñigo Iribarren,
• Tim Renningholtz,
• Ibon Alkorta and
• Cristina Trujillo

Beilstein J. Org. Chem. 2024, 20, 2668–2681, doi:10.3762/bjoc.20.224

• oxygen atoms [6][7]. Carbon capture and utilisation (CCU) technologies involve the extraction of CO2 from the atmosphere of the Earth to generate value-added chemicals, which can serve as platform chemicals in other chemical processes [20][21]. This is achieved by inserting CO2 as a C1 building block

Visible-light-mediated flow protocol for Achmatowicz rearrangement

• Joachyutharayalu Oja,
• Sanjeev Kumar and
• Srihari Pabbaraja

Beilstein J. Org. Chem. 2024, 20, 2493–2499, doi:10.3762/bjoc.20.213

• transformations, then reaction extraction and separation, into a single process, which are typically performed individually/separately in batch methods. This enhances the overall efficiency for obtaining the desired product(s) from the reaction mixture. In continuation to our efforts on developing flow-based

• towards investigating for the selective elimination of the waste solvent using an integrated one-flow work-up procedure to generate 3a with maximum practicality. Initially, the individual stages of the liquid–liquid extraction was achieved using the droplet micro fluidic method for extracting the compound

• (see details in Supporting Information File 1, Table S2). In this context, our previously in-house-developed liquid–liquid extractor was utilized (see details in Supporting Information File 1, Figure S4) [27]. After few trials towards optimization of extraction and separation, the best yield (82%) was