Synthesis of triazolo- and tetrazolo-fused 1,4-benzodiazepines via one-pot Ugi–azide and Cu-free click reactions

• Xiaoming Ma,
• Zijie Gao,
• Jiawei Niu,
• Wentao Shao,
• Shenghu Yan,
• Sai Zhang and
• Wei Zhang

Beilstein J. Org. Chem. 2025, 21, 2202–2210, doi:10.3762/bjoc.21.167

• /bjoc.21.167 Abstract A one-pot Ugi–azide reaction followed by intramolecular Cu-free azide–alkyne cycloaddition generates a polycyclic scaffold 7 bearing polycyclic triazole, tetrazole, and benzodiazepine rings. This method could be extended for obtaining a more complicated scaffold 8 containing a

• piperazinone ring. Keywords: benzodiazepine; click reaction; multicomponent reaction; one-pot; piperazinone; polycyclic; triazole; tetrazole; Ugi–azide reaction; Introduction Triazole, tetrazole, and benzodiazepine are privileged heterocyclic rings commonly found in drug molecules and functional materials [1

• ][2][3][4][5]. For example, triazole-fused 1,4-benzodiazepins are protease inhibitors [6] and part of drug molecules such as alprazolam [7], estazolam [8], and triazolam [9] (Figure 1). Tetrazole-containing functional materials have been developed as photographic sensitizers, diagnostic contrast

Electrochemical cyclization of alkynes to construct five-membered nitrogen-heterocyclic rings

• Lifen Peng,
• Ting Wang,
• Zhiwen Yuan,
• Bin Li,
• Zilong Tang,
• Xirong Liu,
• Hui Li,
• Guofang Jiang,
• Chunling Zeng,
• Henry N. C. Wong and
• Xiao-Shui Peng

Beilstein J. Org. Chem. 2025, 21, 2173–2201, doi:10.3762/bjoc.21.166

• of carbamates as well [271]. Notably, the above approach provided imidazopyridines in high yields under aqueous solution without any metal catalysts. Early in 2008, an electrochemical copper(I)-catalyzed azide–alkyne cycloaddition (CuAAC) to access 1,2,3-triazole was realized by Finn [272]. But the

• copper catalyst was still required in that procedure. In 2023, Bera presented an electrochemical oxidative [3 + 2] cycloaddition of secondary propargyl alcohol to access 1,2,3-triazole (Scheme 19) [273]. After probing the reaction systematically, the optimal conditions were presented as following: a

• to produce 51a. This report produced 1,2,3-triazole without any metal catalysts, but the reaction time was relatively long, and the yield remained to enhance. Conclusion and Outlook In conclusion, the construction of organic five-membered rings attracted popular attention due to their distinctive

Switchable pathways of multicomponent heterocyclizations of 5-amino-1,2,4-triazoles with salicylaldehydes and pyruvic acid

• Yana I. Sakhno,
• Oleksander V. Buravov,
• Kostyantyn Yu. Yurkov,
• Anastasia Yu. Andryushchenko,
• Svitlana V. Shishkina and
• Valentyn A. Chebanov

Beilstein J. Org. Chem. 2025, 21, 2030–2035, doi:10.3762/bjoc.21.158

• multicomponent reaction of the same starting materials led to the formation of only tetrahydrotriazolopyrimidine derivatives. Keywords: 5-amino-1,2,4-triazole; heterocyclization; multicomponent reaction; salicylaldehyde; ultrasonication; Introduction Multicomponent reactions (MCRs) are a powerful tool for the

• -triazoles, salicylaldehydes, and pyruvic acid were studied under different reaction conditions. In particular, it was found that the three-component reaction of an equimolar mixture of 5-amino-3-methylthio(methoxy)-1,2,4-triazole 1a,b, salicylaldehydes 2a–f, and pyruvic acid (3) under conventional heating

• be noted that this MCR involving unsubstituted 5-amino-1H-1,2,4-triazole under various conditions never proceeds towards the formation of oxygen-bridged compounds [18]. Thus, there is indeed a significant influence of the substituent in position 3 of 5-amino-1H-1,2,4-triazoles on their chemical

Azide–alkyne cycloaddition (click) reaction in biomass-derived solvent Cyrene^TM under one-pot conditions

• Zoltán Medgyesi and
• László T. Mika

Beilstein J. Org. Chem. 2025, 21, 1544–1551, doi:10.3762/bjoc.21.117

• transformation of 1.15 mmol benzyl azide (1a) and 1 mmol phenylacetylene (2a) in the presence of 0.01 mmol CuI and 0.1 mmol Et3N as a model reaction (Scheme 2) under typically used “click conditions” [7]. In common organic solvents, the yields of 1-benzyl-4-phenyl-1H-1,2,3-triazole (3a) were moderate (DCM, 1,4

• 1,2,3-triazole derivatives were generally obtained with good to excellent yields (50–96%). Both electron-withdrawing (fluoro (3b) or trifluoromethyl (3c)) and electron-donating (methoxy, phenoxy, and alkyl (3d–h)) groups were tolerated on the acetylene reaction partner species. In accordance with

• reactions. To demonstrate the one-pot synthesis of 1-benzyl-4-phenyl-1H-1,2,3-triazole (3a), 1.23 mmol benzyl bromide (4a), 1.57 mmol NaN3, 1.06 mmol phenylacetylene (2a), 0.011 mmol CuI, and 0.1 mmol Et3N were mixed in 2.5 mL of solvent and stirred at 85 °C. After 24 h, GC analysis verified a 90% yield of

Advances in nitrogen-containing helicenes: synthesis, chiroptical properties, and optoelectronic applications

• Meng Qiu,
• Jing Du,
• Nai-Te Yao,
• Xin-Yue Wang and
• Han-Yuan Gong

Beilstein J. Org. Chem. 2025, 21, 1422–1453, doi:10.3762/bjoc.21.106

• fluorescence (400–500 nm) and structured UV–vis absorption spectra. Importantly, 15b showed acid/base-switchable UV and CD spectra, suggesting potential for use in responsive optoelectronic systems. Hu’s group reported an X-shaped double [7]helicene 16 functionalized with four triazole units, which

Investigations of amination reactions on an antimalarial 1,2,4-triazolo[4,3-a]pyrazine scaffold

• Henry S. T. Smith,
• Ben Giuliani,
• Kanchana Wijesekera,
• Kah Yean Lum,
• Sandra Duffy,
• Aaron Lock,
• Jonathan M. White,
• Vicky M. Avery and
• Rohan A. Davis

Beilstein J. Org. Chem. 2025, 21, 1126–1134, doi:10.3762/bjoc.21.90

• mixtures were separated by silica flash column chromatography, and in some cases, were subsequently separated by HPLC where required. All reactions gave easily isolated product in high purity (≥95%), with yields ranging from 18% to 87%. No ipso-substituted products, and no triazole–imidazole rearrangement

Silver(I) triflate-catalyzed post-Ugi synthesis of pyrazolodiazepines

• Muhammad Hasan,
• Anatoly A. Peshkov,
• Syed Anis Ali Shah,
• Andrey Belyaev,
• Chang-Keun Lim,
• Shunyi Wang and
• Vsevolod A. Peshkov

Beilstein J. Org. Chem. 2025, 21, 915–925, doi:10.3762/bjoc.21.74

• -acting, potent tranquilizer with moderate duration, belonging to the triazolobenzodiazepine family [10]. It is derived through bioisosteric replacement of the benzodiazepine amide moiety with a triazole ring. Replacements of the benzene ring with thiophene and even with pyrrole are also known. Premazepam

Synthesis, characterization, antimicrobial, cytotoxic and carbonic anhydrase inhibition activities of multifunctional pyrazolo-1,2-benzothiazine acetamides

• Ayesha Saeed,
• Shahana Ehsan,
• Muhammad Zia-ur-Rehman,
• Erin M. Marshall,
• Sandra Loesgen,
• Abdus Saleem,
• Simone Giovannuzzi and
• Claudiu T. Supuran

Beilstein J. Org. Chem. 2025, 21, 348–357, doi:10.3762/bjoc.21.25

• [4]. Notable previous efforts include the synthesis of benzothiazine scaffolds connected to other heterocyclic moieties such as piperazine [5], triazole [6][7], hydantoin [8], and pyrazole moieties [9][10]. Very few examples of pyrazolobenzothiazines presenting an amide moiety are published. This

• to inhibit p38α MAPK and 0.5 µM for TNF-α [10]. Pyrazolobenzothiazines containing a triazole moiety have also been studied as potential antibacterial drugs [7]. Other applications of N-substituted benzyl/phenyl acetamide pyrazolobenzothiazines include superoxide anion and DPPH radical scavenging

Dioxazolones as electrophilic amide sources in copper-catalyzed and -mediated transformations

• Seungmin Lee,
• Minsuk Kim,
• Hyewon Han and
• Jongwoo Son

Beilstein J. Org. Chem. 2025, 21, 200–216, doi:10.3762/bjoc.21.12

• amidation Recently, Cao and co-workers reported the copper-catalyzed synthesis of 1,2,4-triazole derivatives via an N-acyl nitrene intermediate [76]. As illustrated in Scheme 3, dioxazolones 4 and N-iminoquinolinium ylides 5 served as reactive substrates, leading to the formation of various polycyclic 1,2,4

• -triazole analogues 6. Both dioxazolones 4 and N-iminoquinolinium ylides 5 demonstrated excellent tolerance in this transformation. Notably, electron-rich dioxazolones exhibited slightly higher reactivity. The proposed catalytic cycle for the copper-catalyzed synthesis of 1,2,4-triazole derivatives is

• ) nitrenoid intermediate INT-7. Subsequent nitrene insertion, protodemetalation, and intramolecular cyclization furnish the desired 1,2,4-triazole. 1.3 Three-component formation of N-acyl amidines In 2019, N-acyl amidines were prepared from dioxazolones using a copper catalyst with terminal alkynes and

Cu(OTf)₂-catalyzed multicomponent reactions

• Sara Colombo,
• Camilla Loro,
• Egle M. Beccalli,
• Gianluigi Broggini and
• Marta Papis

Beilstein J. Org. Chem. 2025, 21, 122–145, doi:10.3762/bjoc.21.7

• intermediate XXXV. Finally, the final product 35 is yielded via a 1,3-hydride shift. The reaction between diazo derivatives, nitriles, and azodicarboxylates catalyzed by Cu(OTf)2 is an efficient synthetic method to obtain 2,3-dihydro-1,2,4-triazole derivatives 36 (Scheme 27) [45]. The reaction proceeds via a

• , results in a spiro-cyclized intermediate XLI that affords the final product by deprotonation and loss of the copper species. Four-component reactions Two different four-component procedures catalyzed by Cu(OTf)2 are reported in the literature, both to access 1,2,3-triazole derivatives. The first one is a

• aldehydes and phenols. The mechanism involves the reaction of the azide with the hemiacetal XLII generated in situ from the aldehydes and alcohols, followed by coupling with the alkynes to form the triazole ring. Both, copper triflate and copper metal are essential for the success of the reaction. On the

Germanyl triazoles as a platform for CuAAC diversification and chemoselective orthogonal cross-coupling

• John M. Halford-McGuff,
• Thomas M. Richardson,
• Aidan P. McKay,
• Frederik Peschke,
• Glenn A. Burley and
• Allan J. B. Watson

Beilstein J. Org. Chem. 2024, 20, 3198–3204, doi:10.3762/bjoc.20.265

• further diversification of the triazole products, including chemoselective transition metal-catalysed cross-coupling reactions using bifunctional boryl/germyl species. Keywords: chemoselectivity; click chemistry; copper; germanium; triazole; Introduction Since its inception, click chemistry has been

• azide precursors and the formation of a single 1,4-disubstituted triazole product, the copper-catalysed azide–alkyne cycloaddition (CuAAC) remains the archetypal click reaction (Scheme 1) [5]. The reaction has shown applicability on small and large scale, as well as under flow conditions [6], and

• clean conversion to the desired triazole products 1–21 without any observable degermylation or other side reactions that could be anticipated based on transmetalation to Cu [43]. The generality of the CuAAC process was explored using a range of azides (Scheme 2a), with variation of the germanyl alkyne

Synthesis of the 1,5-disubstituted tetrazole-methanesulfonylindole hybrid system via high-order multicomponent reaction

• Cesia M. Aguilar-Morales,
• América A. Frías-López,
• Nadia V. Emilio-Velázquez,
• Alejandro Islas-Jácome,
• Angelica Judith Granados-López,
• Jorge Gustavo Araujo-Huitrado,
• Yamilé López-Hernández,
• Hiram Hernández-López,
• Luis Chacón-García,
• Jesús Adrián López and
• Carlos J. Cortés-García

Beilstein J. Org. Chem. 2024, 20, 3077–3084, doi:10.3762/bjoc.20.256

• relevant for the cytotoxic activity. The 1,5-disubstituted tetrazole-1,2,3-triazole hybrids synthesized by our group [26] had similar effects to the present compounds, suggesting that 1,5-disubstituted tetrazole and indole are pharmacophoric fragments with significant biological and pharmacological

Cyclodextrin-based rotaxanes for polymer materials: challenge on simultaneous realization of inexpensive production and defined structures

• Yosuke Akae

Beilstein J. Org. Chem. 2024, 20, 3026–3049, doi:10.3762/bjoc.20.252

• tetrathiafulvalene (TTF) and a triazole ring (Figure 7A) [61]. CD was located around the TTF moiety under neutral conditions; however, it moved to the triazole ring, following TTF oxidization. Meanwhile, the structural control by exploring the solvent polarity was reported by Harada and co-workers using the α-CD

Tailored charge-neutral self-assembled L₂Zn₂ container for taming oxalate

• David Ocklenburg and
• David Van Craen

Beilstein J. Org. Chem. 2024, 20, 3007–3015, doi:10.3762/bjoc.20.250

• order to tightly lock the dianion between the metal centers. We envisioned that a powerful lever for achieving a shorter metal–metal distance in our metallocontainer is to enhance the degree of freedom of the ligand backbone’s central part while maintaining the proven design principles with triazole

• for the formation of a racemic helicate which usually can result in diastereotopic splitting of methylene groups which are in the direct periphery of the metal complex units. Furthermore, the triazole signals (Hg) of the [L2Zn2] complex are also split. A possible cause for this rather unexpected

• )@L2Zn2]2− exists probably as meso-form and a helicate to “meso-helicate” transformation took place. Second, a 2D NOESY NMR spectrum of the 1:1 complex with oxalate reveals through-space contacts of the triazole protons (Hg) with the aromatic proton Ha which is next to the coordinating nitrogen center of

Recent advances in transition-metal-free arylation reactions involving hypervalent iodine salts

• Ritu Mamgain,
• Kokila Sakthivel and
• Fateh V. Singh

Beilstein J. Org. Chem. 2024, 20, 2891–2920, doi:10.3762/bjoc.20.243

• usage of directing groups and any metal catalyst. Also, the electronic nature of a substituent at the C4 position of the starting triazole did not negatively impact the regioselectivity. Further, C4 and C5 disubstituted triazoles also produced the N2-arylated product. Remarkably, this is the only

Investigation of a bimetallic terbium(III)/copper(II) chemosensor for the detection of aqueous hydrogen sulfide

• Parvathy Mini,
• Michael R. Grace,
• Genevieve H. Dennison and
• Kellie L. Tuck

Beilstein J. Org. Chem. 2024, 20, 2818–2826, doi:10.3762/bjoc.20.237

• /bjoc.20.237 Abstract The chemosensor properties of a bimetallic terbium(III)/copper(II) complex functionalized with a 4-(2-pyridyl)-1,2,3-triazole ligand for the detection of Cu2+ ions and, aqueous and gaseous hydrogen sulfide was investigated. The 4-(2-pyridyl)-1,2,3-triazole ligand functions both as

• 4-(2-pyridyl)-1,2,3-triazole). A europium(III)/copper(II) complex [Eu(triazole-DPA)3·3Cu]3+(Figure 1), functionalized with 4-(2-pyridyl)-1,2,3-triazole serving as both an antenna chromophore and a receptor for Cu2+ ions, previously demonstrated theoretical limits of detection (LoD) of 1.1 μM for

• (DO2A)(triazole-DPA)·Cu]+ (Ln = Eu and Tb, Figure 1). We found that both sensors gave good sensitivity for detection of aqueous H2S, however, only the europium variant, [Eu(DO2A)(triazole-DPA)·Cu]+, gave a luminescent increase in the presence of gaseous H2S. Exposure of [Tb(DO2A)(triazole-DPA)·Cu]+ to

5th International Symposium on Synthesis and Catalysis (ISySyCat2023)

• Anthony J. Burke and
• Elisabete P. Carreiro

Beilstein J. Org. Chem. 2024, 20, 2704–2707, doi:10.3762/bjoc.20.227

• in MeOH at room temperature with a short reaction time. Some of them were further functionalized with a 1,2,3-triazole ring via copper-catalyzed azide–alkyne cycloaddition (CuAAC) and deprotected with trifluoroacetic acid. Several hybrids were evaluated against six cancer cell lines, displaying GI50

Synthesis, electrochemical properties, and antioxidant activity of sterically hindered catechols with 1,3,4-oxadiazole, 1,2,4-triazole, thiazole or pyridine fragments

• Daria A. Burmistrova,
• Andrey Galustyan,
• Nadezhda P. Pomortseva,
• Kristina D. Pashaeva,
• Maxim V. Arsenyev,
• Oleg P. Demidov,
• Mikhail A. Kiskin,
• Andrey I. Poddel’sky,
• Nadezhda T. Berberova and
• Ivan V. Smolyaninov

Beilstein J. Org. Chem. 2024, 20, 2378–2391, doi:10.3762/bjoc.20.202

• -triazole, thiazole, or pyridine were synthesized by the reaction of 3,5-di-tert-butyl-o-benzoquinone or 3,5-di-tert-butyl-6-methoxymethylcatechol with different heterocyclic thiols. The S-functionalized catechols were prepared by the Michael reaction from 3,5-di-tert-butyl-o-benzoquinone and the

• corresponding thiols. The starting reagents such as substituted 1,3,4-oxadiazole-2-thiols and 4H-triazole-3-thiols are characterized by thiol–thione tautomerism, therefore their reactions with 3,5-di-tert-butyl-6-methoxymethylcatechol can proceed at the sulfur or nitrogen atom. In the case of mercapto

• -derivatives of thiazole or pyridine, this process leads to the formation of the corresponding thioethers with a methylene linker. At the same time, thiolated 1,3,4-oxadiazole or 1,2,4-triazole undergo alkylation at the nitrogen atom in the reaction with 3,5-di-tert-butyl-6-methoxymethylcatechol to form the

Asymmetric organocatalytic synthesis of chiral homoallylic amines

• Nikolay S. Kondratyev and
• Andrei V. Malkov

Beilstein J. Org. Chem. 2024, 20, 2349–2377, doi:10.3762/bjoc.20.201

• analogues, a novel tetrakis-triazole-based H-bond donor catalyst 111 was identified as most promising. Among different nucleophilic allylating reagents, 2-methallyltributyltin (107) emerged as optimal in terms of reactivity and enantioselectivity. It was speculated that the enantioinduction is realised via

• situ-generated N-acylquinolinium ions, catalysed by a tetrakis-triazole HBD catalyst [40]. Chiral phosphoric acid-catalysed aza-Cope rearrangement of in situ-formed N-α,α’-diphenyl-(α’’-allyl)methyliminium cations reported by Rueping et al. 2008 [41]. Tandem (R)-VANOL-triborate-catalysed asymmetric aza

Improved deconvolution of natural products’ protein targets using diagnostic ions from chemical proteomics linkers

• Andreas Wiest and
• Pavel Kielkowski

Beilstein J. Org. Chem. 2024, 20, 2323–2341, doi:10.3762/bjoc.20.199

• interrupted CuAAC mechanism [65]. The thiotriazole product of this reaction, which is indistinguishable in the protein-level downstream analysis, is formed by coupling between protein free thiol groups and the triazole–copper adduct (Figure 4). However, its formation can be avoided by eliminating the free

• . The fragmentation of the triazole ring leaving the primary amine and b-ion resulting from the fragmentation of the TEV-recognition peptide sequence. The chemical cleavage of the linker to release probe–peptide conjugates is achieved mainly by the change of the pH or via reducing conditions to release

Catalysing (organo-)catalysis: Trends in the application of machine learning to enantioselective organocatalysis

• Stefan P. Schmid,
• Leon Schlosser,
• Frank Glorius and
• Kjell Jorner

Beilstein J. Org. Chem. 2024, 20, 2280–2304, doi:10.3762/bjoc.20.196

• physical organic chemistry with data-driven analysis techniques, in particular MLR, to gain a greater understanding of the enantioselectivity-determining steps for a C–N coupling catalysed by CPA derivatives (Figure 15A) [143]. Based on their findings that π–π interactions between the catalyst’s triazole

Metal-free double azide addition to strained alkynes of an octadehydrodibenzo[12]annulene derivative with electron-withdrawing substituents

• Naoki Takeda,
• Shuichi Akasaka,
• Susumu Kawauchi and
• Tsuyoshi Michinobu

Beilstein J. Org. Chem. 2024, 20, 2234–2241, doi:10.3762/bjoc.20.191

• ) is more energetically demanding than the counter monoadduct (out) due to steric factors. The second azide addition follows this step. The alkyne, which is diagonally positioned relative to the triazole group, shows the highest reactivity due to its significant distortion. This finding correlates with

Heterocycle-guided synthesis of m-hetarylanilines via three-component benzannulation

• Andrey R. Galeev,
• Maksim V. Dmitriev,
• Alexander S. Novikov and
• Andrey N. Maslivets

Beilstein J. Org. Chem. 2024, 20, 2208–2216, doi:10.3762/bjoc.20.188

•  5). In fact, arylamine 3fa, produced from furan-substituted 1,3-diketone 1f and a 5-fold excess of benzylamine, could be prepared in 18% crude yield (after 7 days, see Supporting Information File 1, page S9). Finally, all attempts to perform the reaction with 1,2,3-triazole 1,3-diketone 1g (σm/σp

• 0.043/0.011) with model amine series failed (7 days reaction time in each case). This result is in good agreement with low Hammett constants of the triazole-substituent of 1,3-diketone 1g, which are close to the calculated Hammett constants of the phenyl group (σm/σp 0.055/0.012). Quantum-chemical

Factors influencing the performance of organocatalysts immobilised on solid supports: A review

• Zsuzsanna Fehér,
• Dóra Richter,
• Gyula Dargó and
• József Kupai

Beilstein J. Org. Chem. 2024, 20, 2129–2142, doi:10.3762/bjoc.20.183

• selectivity, features a 1,2,3-triazole-4-yl unit as the substituent at the tertiary amine-containing quinuclidine motif, whereas C30 and C31 have an ethyl group attached to the ring in this position. Additionally, catalyst C31 has a longer-chain linker, but its squaramide NH groups are more acidic due to

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

• 47, can be accessed from polyfunctional hydrazine derivatives via multicomponent reactions. For the preparation of pyrazoles 47, 4-amino-5-hydrazinyl-4H-1,2,4-triazole-3-thiol (44), phenylacyl bromides 45, and benzoylacetonitriles 46 were chosen as starting materials (Scheme 13) [67]. Thereby