Laser ablation in liquids for shape-tailored synthesis of nanomaterials: status and challenges

• Natalie Tarasenka

Beilstein J. Nanotechnol. 2025, 16, 1963–1997, doi:10.3762/bjnano.16.137

• solvents including methanol. The authors explained the influence of the methanol environment on the nanomaterial shape by attributing it to chemical reactions between iron and methanol molecules, which resulted in the formation of goethite (FeO(OH)) and subsequently led to nanowire growth: Since iron oxide

• experimental parameters: laser pulse duration in the range 4–5 ms was required. The authors also demonstrated the role of Cu comprising the target. Despite the absence in the formed ZnS nanowire structure, the ablation of a single-element Zn target produced only spherical ZnS@Zn core–shell nanostructures

• believed to be caused by initiation of hydrolysis reactions on the nanowire tips. As a result of the hydrolysis, Zn(OH)2 and H2Se are produced, the latter can undergo oxidation with oxygen from the purged air that promoted the reactions of hydrolysis. In the next section, the main processes and most recent

Low-temperature AFM with a microwave cavity optomechanical transducer

• Ermes Scarano,
• Elisabet K. Arvidsson,
• August K. Roos,
• Erik Holmgren,
• Riccardo Borgani,
• Mats O. Tholén and
• David B. Haviland

Beilstein J. Nanotechnol. 2025, 16, 1873–1882, doi:10.3762/bjnano.16.130

• Si–N plate released from a Si substrate. The microwave superconducting lumped-element resonant circuit consists of an interdigital capacitor in series with a meandering nanowire inductor, both fabricated from a single layer of Nb–Ti–N deposited on the Si–N. The nanowire meanders across the clamping

Photocatalytic degradation of ofloxacin in water assisted by TiO₂ nanowires on carbon cloth: contributions of H₂O₂ addition and substrate absorbability

• Iram Hussain,
• Lisha Zhang,
• Zhizhen Ye and
• Jin-Ming Wu

Beilstein J. Nanotechnol. 2025, 16, 1567–1579, doi:10.3762/bjnano.16.111

• unsatisfactory interaction with target contaminants diminishes photocatalytic degradation efficiency in water. Here, we present a mild solution method to precipitate anatase TiO2 nanowire arrays, measuring 1.5 μm in thickness, over carbon cloth to ensure substantial interactions with target pollutants and, in

• turn, a superior photoactivity. Compared to TiO2 nanowire arrays grown on metallic Ti substrates, TiO2 nanowires supported on carbon cloth substrates demonstrate markedly superior efficiency in the photocatalytic degradation of ofloxacin (OFL) molecules in water when exposed to UV light. The TiO2

• deposition, electrophoretic deposition, and electrochemical deposition are extensively utilized for the synthesis of TiO2 nanowire arrays, owing to their advantageous physical properties and varied applications [14][15]. Our previous study accomplished the precipitation of TiO2 nanowire arrays, with

Parylene-coated platinum nanowire electrodes for biomolecular sensing applications

• Chao Liu,
• Peker Milas,
• Michael G. Spencer and
• Birol Ozturk

Beilstein J. Nanotechnol. 2025, 16, 1392–1400, doi:10.3762/bjnano.16.101

• recent years due to their unique characteristics and size. Manufacturing steps, cost, and other shortcomings limit the widespread use and commercialization of nanoscale electrodes. In this work, a nano-size electrode fabricated by directed electrochemical nanowire assembly and parylene-C insulation is

• introduced. Results show that the diameter of the platinum nanowire and electrode tip length can be tuned down to 120 nm and 1.2 µm, respectively, where the exposed nanowires on the electrode tips are chemically active and their surfaces can be modified for specific biosensing applications. The biosensing

• due to their compact size, biocompatibility, and rapid fabrication. Keywords: biosensor; directed electrochemical nanowire assembly (DENA); dopamine; glucose; nanoelectrode; platinum; Introduction Electrodes, a tool used in all walks of life today, were first demonstrated by Max Cremer in 1906 [1

Soft materials nanoarchitectonics: liquid crystals, polymers, gels, biomaterials, and others

• Katsuhiko Ariga

Beilstein J. Nanotechnol. 2025, 16, 1025–1067, doi:10.3762/bjnano.16.77

• . At a temperature of 5 °C, the molecules formed islands with a high degree of density. At 40 °C and 10 mN·m−1, a network of separated nanowires was observed. As the surface pressure increased, the separated nanowires exhibited a tendency to come closer together, ultimately forming a nanowire network

• observed to undergo irreversible structural changes, occurring through mechanisms such as loss of monolayer by desorption and local nucleation of defects. In terms of morphology, the nanoscale structure of the monolayer underwent a transformation from a randomly oriented nanowire configuration to a closely

• packed nanowire domain as the surface pressure increased. Ultimately, this transition culminated in the formation of fragmented wire segments that diffused locally on the film. These findings may offer insights into the fabrication of controllable nanoarchitectures of bipolar discotic liquid crystal

Nanostructured materials characterized by scanning photoelectron spectromicroscopy

• Matteo Amati,
• Alexey S. Shkvarin,
• Alexander I. Merentsov,
• Alexander N. Titov,
• María Taeño,
• David Maestre,
• Sarah R. McKibbin,
• Zygmunt Milosz,
• Ana Cremades,
• Rainer Timm and
• Luca Gregoratti

Beilstein J. Nanotechnol. 2025, 16, 700–710, doi:10.3762/bjnano.16.54

• operando chemical and electronic characterization of an InP nanowire heterostructure device under applied bias is reported. In the last example, the results of a SPEM investigation of self-organized NiO microcavity arrays exhibiting dimensions in the micrometric range concludes this overview of

•  1i–k). Operando characterization of InP nanowire p–n junctions Semiconductor nanowires offer unprecedented possibilities in utilizing, combining, and modifying material properties for application in electronic, photonic, energy harvesting, or quantum information devices [15][16]. Their small

• footprint allows for the combination of different materials with dislocation-free interfaces and to form axial or radial heterostructures of varying material, doping, or crystal phase [17][18][19]. Nanowire heterostructures based on III–V semiconductors are especially promising for electronic

New design of operational MEMS bridges for measurements of properties of FEBID-based nanostructures

• Bartosz Pruchnik,
• Krzysztof Kwoka,
• Ewelina Gacka,
• Dominik Badura,
• Piotr Kunicki,
• Andrzej Sierakowski,
• Paweł Janus,
• Tomasz Piasecki and
• Teodor Gotszalk

Beilstein J. Nanotechnol. 2024, 15, 1273–1282, doi:10.3762/bjnano.15.103

• different FIB parameters. An example of such a setup would be the cantilever described in [43]. On the base of the aligned opMEMS, a FEBID nanowire was deposited (Figure 7a) in a single-step process, where point-by-point deposition was performed along the pattern line using the following parameters: 5 keV

• , 17 pA, 13 ms dwell time, a single line pattern in a single pass with 4 nm pitch, and MeCpPtMe3 precursor at 321 K with a flow rate of 8.5 × 10−4 μm3/s. The pattern line was set to begin on one electrode and end on the other (Figure 7). In between, the nanowire growth proceeded horizontally with an

• apex by choosing appropriate dwell time and pitch for the deposition. The dimensions of the nanowire were 60 nm in diameter and 1.6 μm in length. The junction was tested by resistance measurements (Figure 8b). The measured resistance was 12 MΩ, giving a resistivity of approximately 2.1 Ω·cm, which is

Photocatalytic methane oxidation over a TiO₂/SiNWs p–n junction catalyst at room temperature

• Qui Thanh Hoai Ta,
• Luan Minh Nguyen,
• Ngoc Hoi Nguyen,
• Phan Khanh Thinh Nguyen and
• Dai Hai Nguyen

Beilstein J. Nanotechnol. 2024, 15, 1132–1141, doi:10.3762/bjnano.15.92

• well prepared with an average length of 4 µm. Moreover, the surface of the SiNWs was fully decorated by the TiO2 passivation layer and became blurry. The active pure 25 nm TiO2 layer exhibits flake-like morphology as displayed in Figure 2c,d. Optical properties Nanowire arrays offer a better optical

• a water contact angle of 50.24°. Because of the nanowire array morphology, the p-Si NWs were more hydrophilic nature with a water contact angle of 3.36°, which manifests superior photocatalytic oxidative coupling. Raman spectra were conducted to confirm the surface composition of the synthesized

• p-Si NW Conclusion A p–n junction TiO2/SiNWs photocatalyst was synthesized via ALD and utilized for light-driven OCM. TiO2/SiNWs revealed excellent performance owing to the smooth transport of photogenerated electrons in the p–n junction, which lowers the e–h recombination rate. The nanowire array

Recent progress on field-effect transistor-based biosensors: device perspective

• Billel Smaani,
• Fares Nafa,
• Mohamed Salah Benlatrech,
• Ismahan Mahdi,
• Hamza Akroum,
• Mohamed walid Azizi,
• Khaled Harrar and
• Sayan Kanungo

Beilstein J. Nanotechnol. 2024, 15, 977–994, doi:10.3762/bjnano.15.80

• gates [81][82]. 2.1.5 Nanowire FET-based biosensors. As planar FET devices face several challenges, such as the weak controllability of the gate electrode through the channel, alternative solutions have been explored. The concept of nanowire tunnel FETs (NW TFET) was proposed by Soni et al. [83] for

• material and silicon-on-insulator substrates with low-doped device layers and small nanowire diameters, achieving a fully depleted mechanism and allowing better surface-to-volume ratios and higher sensitivity applications. 2.2 Two-dimensional FET-based biosensors 2.2.1 Source-engineered Schottky barrier

Elastic modulus of β-Ga₂O₃ nanowires measured by resonance and three-point bending techniques

• Annamarija Trausa,
• Sven Oras,
• Sergei Vlassov,
• Mikk Antsov,
• Tauno Tiirats,
• Andreas Kyritsakis,
• Boris Polyakov and
• Edgars Butanovs

Beilstein J. Nanotechnol. 2024, 15, 704–712, doi:10.3762/bjnano.15.58

• finely controllable β-Ga2O3 NW synthesis methods and detailed post-examination of their mechanical properties before considering their application in future nanoscale devices. Keywords: atomic force microscopy; elastic modulus; gallium oxide; mechanical properties; nanowire; scanning electron microscopy

Modulated critical currents of spin-transfer torque-induced resistance changes in NiCu/Cu multilayered nanowires

• Mengqi Fu,
• Roman Hartmann,
• Julian Braun,
• Sergej Andreev,
• Torsten Pietsch and
• Elke Scheer

Beilstein J. Nanotechnol. 2024, 15, 360–366, doi:10.3762/bjnano.15.32

• vertically patterned magnetic nanowires on a Si substrate. With this approach we fabricated three-dimensional nanowire-based spin valve devices without the need of complex etching processes or additional spacer coating. Through this method, we successfully obtained NiCu/Cu multilayered nanowire arrays with a

• oscillatory manner by the magnetic field in the nanowire-based devices. We present a toy model to qualitatively explain these observations. Keywords: AAO template; critical current; multilayered magnetic nanowires; spin-transfer torque; three-dimensional devices; Introduction Spin-transfer torque (STT) has

• been utilized as an effective tool in fundamental studies [1][2] as well as advanced technologies [2][3][4][5][6] to quickly change the magnetization in nanoscopic magnetic systems [2][5][7]. Among manifold material synthesis strategies, high-aspect-ratio multilayered nanowire arrays based on anodic

Design, fabrication, and characterization of kinetic-inductive force sensors for scanning probe applications

• August K. Roos,
• Ermes Scarano,
• Elisabet K. Arvidsson,
• Erik Holmgren and
• David B. Haviland

Beilstein J. Nanotechnol. 2024, 15, 242–255, doi:10.3762/bjnano.15.23

• microscopy based on electromechanical coupling due to a strain-dependent kinetic inductance of a superconducting nanowire. The force sensor is a bending triangular plate (cantilever) whose deflection is measured via a shift in the resonant frequency of a high-Q superconducting microwave resonator at 4.5 GHz

• ][7]. We recently introduced such a sensor based on the electromechanical coupling between surface strain and kinetic inductance of a superconducting nanowire [8]. In this paper, we describe in detail the fabrication and characterization methods of these kinetic inductive mechano-electric coupling

• thicker silicon (Si) support, as shown in Figure 1a and Figure 1g. Figure 1a shows the microwave resonant circuit with its interdigital capacitor in series with the nanowire inductor. The meandering nanowire is placed at the base of the cantilever as shown in Figure 1c, in the area of largest strain

In situ optical sub-wavelength thickness control of porous anodic aluminum oxide

• Aleksandrs Dutovs,
• Raimonds Popļausks,
• Oskars Putāns,
• Vladislavs Perkanuks,
• Aušrinė Jurkevičiūtė,
• Tomas Tamulevičius,
• Uldis Malinovskis,
• Iryna Olyshevets,
• Donats Erts and
• Juris Prikulis

Beilstein J. Nanotechnol. 2024, 15, 126–133, doi:10.3762/bjnano.15.12

• of templates, including evaporation masks [8][9][10], molds for nanowire array production using the supercritical fluid method [11], electrochemical deposition [12], atomic layer deposition [13], or traps for colloidal nanoparticle assembly [14]. Several applications, for example, color filtering [15

Humidity-dependent electrical performance of CuO nanowire networks studied by electrochemical impedance spectroscopy

• Jelena Kosmaca,
• Juris Katkevics,
• Jana Andzane,
• Raitis Sondors,
• Liga Jasulaneca,
• Raimonds Meija,
• Kiryl Niherysh,
• Yelyzaveta Rublova and
• Donats Erts

Beilstein J. Nanotechnol. 2023, 14, 683–691, doi:10.3762/bjnano.14.54

• , Riga, Latvia 10.3762/bjnano.14.54 Abstract Electrochemical impedance spectroscopy was applied for studying copper oxide (CuO) nanowire networks assembled between metallic microelectrodes by dielectrophoresis. The influence of relative humidity (RH) on electrical characteristics of the CuO nanowire

• chemisorption and physisorption at the nanowire interface, which suppress electronic transport inside the p-type semiconductor nanowire but enhance ionic transport in the water layers adsorbed on the nanowire surface. Possible physicochemical processes at the nanowire surface are discussed in line with

• equivalent circuit parameters obtained by fitting impedance spectra. The new investigation data can be useful to predict the behavior of nanostructured CuO in humid environments, which is favorable for advancing technology of nanowire-based systems suitable for sensor applications. Keywords: CuO

Thermal transport in kinked nanowires through simulation

• Alexander N. Robillard,
• Graham W. Gibson and
• Ralf Meyer

Beilstein J. Nanotechnol. 2023, 14, 586–602, doi:10.3762/bjnano.14.49

• Alexander N. Robillard Graham W. Gibson Ralf Meyer Bharti School of Engineering and Computer Science, Laurentian University, Sudbury P3E 2C6, Canada 10.3762/bjnano.14.49 Abstract The thermal conductance of nanowires is an oft-explored quantity, but its dependence on the nanowire shape is not

• Fourier model. Keywords: ballistic transport; kinked nanowire; molecular dynamics; phonon Monte Carlo; thermal transport; Introduction The thermal conductivity of semiconductor nanostructures is of great interest because of potential applications in a wide variety of fields, such as thermal control

• angling of the wire should result in reduced quantities of unrestricted ballistic transport. Gradually increasing the angle effectively reduces the quantity of unobstructed line of sight (LoS) paths from one end of a nanowire to the other. We use molecular dynamics (MD) [25] to study an atomistic approach

Molecular nanoarchitectonics: unification of nanotechnology and molecular/materials science

• Katsuhiko Ariga

Beilstein J. Nanotechnol. 2023, 14, 434–453, doi:10.3762/bjnano.14.35

• nanowire and the corresponding chemical structure are also shown. In this attempt, phenylene–ethynylene nanowires with alternating polymerization of phenylene and tetrafluorophenylene have been successfully synthesized while simultaneously imaging the molecules. Sonogashira reactions at the surface are

Plasmonic nanotechnology for photothermal applications – an evaluation

• A. R. Indhu,
• L. Keerthana and
• Gnanaprakash Dharmalingam

Beilstein J. Nanotechnol. 2023, 14, 380–419, doi:10.3762/bjnano.14.33

Upper critical magnetic field in NbRe and NbReN micrometric strips

• Zahra Makhdoumi Kakhaki,
• Antonio Leo,
• Federico Chianese,
• Loredana Parlato,
• Giovanni Piero Pepe,
• Angela Nigro,
• Carla Cirillo and
• Carmine Attanasio

Beilstein J. Nanotechnol. 2023, 14, 45–51, doi:10.3762/bjnano.14.5

• candidates for the realization of fast superconducting nanowire single-photon detectors (SNSPDs) [1][2][3][4]. Apart from the reduced values of the superconducting gap and short quasi-particle relaxation times [5], the property that makes these materials appropriate to be used as SNSPDs is the high value of

Gap-directed chemical lift-off lithographic nanoarchitectonics for arbitrary sub-micrometer patterning

• Chang-Ming Wang,
• Hong-Sheng Chan,
• Chia-Li Liao,
• Che-Wei Chang and
• Wei-Ssu Liao

Beilstein J. Nanotechnol. 2023, 14, 34–44, doi:10.3762/bjnano.14.4

• cause lithographic limitation, the structural gaps generated at the stamp–substrate interface during the contacting stage can provide another opportunity to create minute geometries. For example, nanochannels with height on the order of 10 nm and millimeters in length can be created when a nanowire is

Studies of probe tip materials by atomic force microscopy: a review

• Ke Xu and
• Yuzhe Liu

Beilstein J. Nanotechnol. 2022, 13, 1256–1267, doi:10.3762/bjnano.13.104

• response mechanism was further explored to construct a highly selective and sensitive silver-doped gold-based bimetallic nanocluster fluorescent probe. Metal nanowire probe Nanowires have become a hot research topic as high aspect ratio structures [28][29][30]. In addition to their plain geometry, the

• robustness and durability of nanowire scanning probes are also crucial. Due to their unique properties in electrical, magnetic, and optical research fields [31][32][33], metal nanowires have been prepared by various methods and applied in various fields by domestic and foreign scholars in recent years. Tay

• et al. [34] developed a technique based on field emission-induced growth by growing a single metal nanowire at the AFM tip and forming vertically aligned nanowire probes on AFM cantilever beams of different types and force constants. This type of probe has properties such as a high aspect ratio and

Application of nanoarchitectonics in moist-electric generation

• Jia-Cheng Feng and
• Hong Xia

Beilstein J. Nanotechnol. 2022, 13, 1185–1200, doi:10.3762/bjnano.13.99

• . However, after the solid–liquid contact, the research on the principle of the selective interaction of ions at the solid interface is still not comprehensive and systematic. And more experimental work is needed to complement and prove it. In 2014, Zhu et al. fabricated a nanowire fluorinated ethylene

• without modification. The high surface area from the nanowire arrays perpendicular to the surface plays an important role in increasing the output power. MEG devices based on polyethylene derivatives have been prepared using a variety of methods to obtain nanoscale networks with high porosity, including

• . 105630, Copyright Elsevier (2021). This content is not subject to CC BY 4.0. (f) SEM image of high porosity TiO2 nanowire network. Figure 4f was reproduced from [54], Shen, D. et al., “Self-Powered Wearable Electronics Based on Moisture Enabled Electricity Generation”, Adv. Mater., with permission from

Effects of focused electron beam irradiation parameters on direct nanostructure formation on Ag surfaces

• Jānis Sniķeris,
• Vjačeslavs Gerbreders,
• Andrejs Bulanovs and
• Ēriks Sļedevskis

Beilstein J. Nanotechnol. 2022, 13, 1004–1010, doi:10.3762/bjnano.13.87

• material greatly affects the growth rate of the nanowires, with the Cu surface providing the fastest growth. Energy-dispersive X-ray spectroscopy (EDX) revealed the presence of both carbon and substrate materials in the nanowires. The effect of substrate material on nanowire growth rate could be attributed

Efficient liquid exfoliation of KP₁₅ nanowires aided by Hansen's empirical theory

• Zhaoxuan Huang,
• Zhikang Jiang,
• Nan Tian,
• Disheng Yao,
• Fei Long,
• Yanhan Yang and
• Danmin Liu

Beilstein J. Nanotechnol. 2022, 13, 788–795, doi:10.3762/bjnano.13.69

• previous study, with thickness reduction of the KP15 nanowires, a surface-state luminescence at 693 nm gradually dominates in the KP15 nanowire [14]. This could affect light absorption properties of KP15 due to its decreased size. To avoid the generation of concentration error caused by the absorbance

• after liquid exfoliation. (e) Width histograms of KP15 nanowires after liquid exfoliation. Sizes of exfoliated KP15 nanowires. (a) Cross section of the KP15 nanowire marked in the upper right corner inset image. (b) Cross section of the KP15 nanowire marked in the upper right corner inset image. (c

• ) Cross section of the KP15 nanowire marked in the upper right corner inset image. (d) Cross section of the KP15 nanowire marked in the upper right corner inset image. Hansen parameters for the solvents [21]. Supporting Information Supporting Information File 10: Strong temperature-dependent Raman

Zinc oxide nanostructures for fluorescence and Raman signal enhancement: a review

• Ioana Marica,
• Fran Nekvapil,
• Maria Ștefan,
• Cosmin Farcău and
• Alexandra Falamaș

Beilstein J. Nanotechnol. 2022, 13, 472–490, doi:10.3762/bjnano.13.40

• milli-Q water to the freshly prepared Ag nanowire solution [55]. A higher photocatalytic activity was shown for the Ag–ZnO core–shell particles compared to ZnO alone under solar light irradiation. SERS applications of ZnO-based nanostructures SERS is a powerful technique with promising applications for

A chemiresistive sensor array based on polyaniline nanocomposites and machine learning classification

• Jiri Kroutil,
• Alexandr Laposa,
• Ali Ahmad,
• Jan Voves,
• Vojtech Povolny,
• Ladislav Klimsa,
• Marina Davydova and
• Miroslav Husak

Beilstein J. Nanotechnol. 2022, 13, 411–423, doi:10.3762/bjnano.13.34

• will be used to predict the probabilistic prediction: SEM micrographs of deposited layers on an interdigital transducer structure: (a) PANI/ZnO, (b) PANI/WO3 (nanopowder), (c) PANI/WO3 (nanowire), (d) PANI/In2O3, (e) PANI/C60, (f) PANI/NCD, (g) PANI/BaTiO3, and (h) pristine PANI. The Raman spectra of