Model systems for studying cell adhesion and biomimetic actin networks

• Dorothea Brüggemann,
• Johannes P. Frohnmayer and
• Joachim P. Spatz

Beilstein J. Nanotechnol. 2014, 5, 1193–1202, doi:10.3762/bjnano.5.131

• represent 10 μm. (Adapted with permission from [72]. Copyright (2011) American Chemical Society.) Transformed liposomes observed by dark-field microscopy in the presence of talin. Liposomes used were prepared from phosphatidylethanolamine and phosphatidylglycerol (1:1, mol:mol). (A) Closed spherical

Template-directed synthesis and characterization of microstructured ceramic Ce/ZrO₂@SiO₂ composite tubes

• Jörg J. Schneider and
• Meike Naumann

Beilstein J. Nanotechnol. 2014, 5, 1152–1159, doi:10.3762/bjnano.5.126

• ) obtained from a HAADF STEM (high angle annular dark field imaging scanning electron microscopy) investigation. The STEM analysis proves the closely packed silica Stoeber spheres, which are interconnected by the solid solution of the composition Ce0.13/Zr0.87O2. The bright contrast visible in the dimples

Carbon dioxide hydrogenation to aromatic hydrocarbons by using an iron/iron oxide nanocatalyst

• Hongwang Wang,
• Jim Hodgson,
• Tej B. Shrestha,
• Prem S. Thapa,
• David Moore,
• Xiaorong Wu,
• Myles Ikenberry,
• Deryl L. Troyer,
• Donghai Wang,
• Keith L. Hohn and
• Stefan H. Bossmann

Beilstein J. Nanotechnol. 2014, 5, 760–769, doi:10.3762/bjnano.5.88

• morphology were examined by bright-field and dark-field transmission electron microscopy (TEM) using an FEI Technai G2 transmission electron microscope at an electron acceleration voltage of 200 kV. High resolution images were captured using a standardized, normative electron dose and a constant defocus

In vitro toxicity and bioimaging studies of gold nanorods formulations coated with biofunctional thiol-PEG molecules and Pluronic block copolymers

• Tianxun Gong,
• Douglas Goh,
• Malini Olivo and
• Ken-Tye Yong

Beilstein J. Nanotechnol. 2014, 5, 546–553, doi:10.3762/bjnano.5.64

• in the overall cell viability. We also demonstrate the use of the functionalized gold nanorods as scattering probes for dark-field imaging of cancer cells thereby demonstrating their biocompatibility. Our results offer a unique solution for the future development of safe scattering color probes for

• clinical applications such as the long term imaging of cells and tissues. Keywords: cancer cells; dark-field imaging; gold nanorods; PEG-SH; PEO–PPO–PEO; Introduction Gold nanorods (AuNRs) have been widely adopted for biological applications due to their unique plasmonic properties. One of the most

• , transmission electron microscopy (TEM), cell viability assay, dynamic light scattering (DLS), and dark-field imaging microscopy. The non-specific uptake of these AuNRs by cells was also studied under dark-field microscopy. Our work demonstrates that the coating of AuNRs surfaces with PEG-SH or PEO–PPO–PEO

Oriented attachment explains cobalt ferrite nanoparticle growth in bioinspired syntheses

• Annalena Wolff,
• Walid Hetaba,
• Marco Wißbrock,
• Stefan Löffler,
• Nadine Mill,
• Katrin Eckstädt,
• Axel Dreyer,
• Inga Ennen,
• Norbert Sewald,
• Peter Schattschneider and
• Andreas Hütten

Beilstein J. Nanotechnol. 2014, 5, 210–218, doi:10.3762/bjnano.5.23

• smaller irregularly-shaped subunits with diameters in the range of D = 5–15 nm. To study the orientation of these subunits a dark field measurement was performed. The marked reflex in the electron diffraction pattern (Figure 3d) was selected using the objective aperture and the TEM was switched back into

• image mode where a dark field image of the entire nanoparticle was recorded. The bright regions within the nanoparticle correspond to the nanoparticle areas that are aligned in such a way that they contribute to the selected diffraction reflex. This measurement shows that regions of substantially

• blocks. They were observed in the HRTEM image of an irregularly-shaped disc (Figure 3). Orientation of primary building blocks The primary building blocks align along a common crystallographic axis. Regions with specific orientations were observed in the dark field measurements in Figure 3. An increase

Design criteria for stable Pt/C fuel cell catalysts

• Josef C. Meier,
• Carolina Galeano,
• Ioannis Katsounaros,
• Jonathon Witte,
• Hans J. Bongard,
• Angel A. Topalov,
• Claudio Baldizzone,
• Stefano Mezzavilla,
• Ferdi Schüth and
• Karl J. J. Mayrhofer

Beilstein J. Nanotechnol. 2014, 5, 44–67, doi:10.3762/bjnano.5.5

• investigation discloses also the platinum nanoparticles inside and on the back side of the porous network. Figure 5 shows dark field scanning transmission electron microscopy (DF-STEM) images for all three materials at the same locations as in Figure 4, before (top) and after (middle) the above described

Deformation-induced grain growth and twinning in nanocrystalline palladium thin films

• Aaron Kobler,
• Jochen Lohmiller,
• Jonathan Schäfer,
• Michael Kerber,
• Anna Castrup,
• Ankush Kashiwar,
• Patric A. Gruber,
• Karsten Albe,
• Horst Hahn and
• Christian Kübel

Beilstein J. Nanotechnol. 2013, 4, 554–566, doi:10.3762/bjnano.4.64

• active in ncPd films deposited by magnetron sputtering onto compliant substrates. The microstructural analysis is mainly performed by quantitative automated crystal orientation mapping TEM (ACOM-TEM) [23][24] and supplemented with grain size measurement using dark-field TEM (DF-TEM) and conventional X

The role of electron-stimulated desorption in focused electron beam induced deposition

• Willem F. van Dorp,
• Thomas W. Hansen,
• Jakob B. Wagner and
• Jeff T. M. De Hosson

Beilstein J. Nanotechnol. 2013, 4, 474–480, doi:10.3762/bjnano.4.56

• precursor was W(CO)6 and the precursor pressure during writing was 1.7 Pa. Figure 1a shows an example of a dot array, written with an irradiation time of 6 s per dot at a substrate temperature of 341 K. The annular dark field (ADF) signal was used for imaging. In ADF images the dot intensity is proportional

• [30]. The STEM images were recorded with the annular dark field (ADF) detector at a camera length of 245 mm (inner detector angle 30 mrad). Before the deposition experiments the microscope and the sample holder were plasma cleaned. The precursor was W(CO)6 (CAS 14040-11-0), a low-vapor pressure solid

Characterization of electroforming-free titanium dioxide memristors

• John Paul Strachan,
• J. Joshua Yang,
• L. A. Montoro,
• C. A. Ospina,
• A. J. Ramirez,
• A. L. D. Kilcoyne,
• Gilberto Medeiros-Ribeiro and
• R. Stanley Williams

Beilstein J. Nanotechnol. 2013, 4, 467–473, doi:10.3762/bjnano.4.55

• ) patterns as well as for transmission and scanning-transmission imaging from bright-field and high-angle annular dark-field (HAADF) detection. Figure 4a shows a low-magnification TEM image of the post-switched forming-free device. A careful analysis of the junction region in the ON state indicates no clear

Low-dose patterning of platinum nanoclusters on carbon nanotubes by focused-electron-beam-induced deposition as studied by TEM

• Xiaoxing Ke,
• Carla Bittencourt,
• Sara Bals and
• Gustaaf Van Tendeloo

Beilstein J. Nanotechnol. 2013, 4, 77–86, doi:10.3762/bjnano.4.9

• dark-field scanning transmission electron microscopy (HAADF-STEM) is used to study the morphology and distribution of the nanoclusters deposited by using different electron beam parameters. Although the as-deposited nanoclusters are composed of Pt and amorphous carbon, it is demonstrated that the

• the morphology and distribution of the nanostructures in 3D, high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) tilt series of the as-deposited CNTs are acquired. The tilt series have an angular range of ±70° with projections taken every 2°, and the tilt axis is set

Tuning the properties of magnetic thin films by interaction with periodic nanostructures

• Ulf Wiedwald,
• Felix Haering,
• Stefan Nau,
• Carsten Schulze,
• Herbert Schletter,
• Denys Makarov,
• Alfred Plettl,
• Karsten Kuepper,
• Manfred Albrecht,
• Johannes Boneberg and
• Paul Ziemann

Beilstein J. Nanotechnol. 2012, 3, 831–842, doi:10.3762/bjnano.3.93

• signal, as well as the dark field (DF) intensity along the line scan. From the EELS line scan, Co is found to be present in the film material filling the contact region between the neighboring particle caps, suggesting that those caps are magnetically connected across the contact region, and form a

Revealing thermal effects in the electronic transport through irradiated atomic metal point contacts

• Bastian Kopp,
• Zhiwei Yi,
• Daniel Benner,
• Fang-Qing Xie,
• Christian Obermair,
• Thomas Schimmel,
• Johannes Boneberg,
• Paul Leiderer and
• Elke Scheer

Beilstein J. Nanotechnol. 2012, 3, 703–711, doi:10.3762/bjnano.3.80

• microscope picture of a MCBJ before electrochemical deposition of Ag (bright-field illumination). (b) Optical microscope picture after the deposition of Ag (dark-field illumination). (a) Light-induced signal (red) of a dry, electrochemically closed break junction, and the laser pulse (blue). (b) Spatially

Nano-structuring, surface and bulk modification with a focused helium ion beam

• Daniel Fox,
• Yanhui Chen,
• Colm C. Faulkner and
• Hongzhou Zhang

Beilstein J. Nanotechnol. 2012, 3, 579–585, doi:10.3762/bjnano.3.67

• FIB lift-out and thinning in the SEM image in Figure 1a. Figure 1b shows the TEM high angle annular dark field (HAADF) image of the lamella after HIM modification. The three dark vertical grooves indicate the areas modified in the HIM. In Figure 1b one effect of the helium ion modification process is

• helium ion patterning was performed with the integrated pattern generator on the tool. For detailed analysis of the effects of our HIM modification these samples were analyzed in an FEI Titan 80-300 (S)TEM operating at 300 kV. High angle annular dark field (HAADF) images were recorded. HAADF images

Nanostructured, mesoporous Au/TiO₂ model catalysts – structure, stability and catalytic properties

• Matthias Roos,
• Dominique Böcking,
• Kwabena Offeh Gyimah,
• Gabriela Kucerova,
• Joachim Bansmann,
• Johannes Biskupek,
• Ute Kaiser,
• Nicola Hüsing and
• R. Jürgen Behm

Beilstein J. Nanotechnol. 2011, 2, 593–606, doi:10.3762/bjnano.2.63

• . The TEM measurements were carried out on a FEI Titan 80–300 microscope operated at 300 kV in scanning mode (STEM). The microscope was equipped with a high-angle annular dark-field (HAADF) STEM detector (type Fischione). The mass sensitive HAADF contrast (intensity scales with ~Z2) results in a very

Nanoscaled alloy formation from self-assembled elemental Co nanoparticles on top of Pt films

• Luyang Han,
• Ulf Wiedwald,
• Johannes Biskupek,
• Kai Fauth,
• Ute Kaiser and
• Paul Ziemann

Beilstein J. Nanotechnol. 2011, 2, 473–485, doi:10.3762/bjnano.2.51

• indicate a thin surface layer of Pt-rich CoxPt1−x alloy on top of the Pt (seen by the weaker absorption contrast). Note that this sample has not been covered by any protective layer. The left image shows the high angle annular dark-field (HAADF) image of the sample shown in Figure 8 using scanning TEM. EDX

Platinum nanoparticles from size adjusted functional colloidal particles generated by a seeded emulsion polymerization process

• Nicolas Vogel,
• Ulrich Ziener,
• Achim Manzke,
• Alfred Plettl,
• Paul Ziemann,
• Johannes Biskupek,
• Clemens K. Weiss and
• Katharina Landfester

Beilstein J. Nanotechnol. 2011, 2, 459–472, doi:10.3762/bjnano.2.50

• ) operating at 300 kV in the scanning mode (STEM). The images were acquired using a mass sensitive high annular dark-field detector (HAADF, type Fischione) resulting in a resolution of < 0.135 nm. Images were evaluated by the use of the program ImageJ. The diameters of the particles in the saturation state

Kinetic lattice Monte-Carlo simulations on the ordering kinetics of free and supported FePt L1₀-nanoparticles

• Michael Müller and
• Karsten Albe

Beilstein J. Nanotechnol. 2011, 2, 40–46, doi:10.3762/bjnano.2.5

• the fraction of atoms that residing in antiphase boundaries. In experiments, the presence of different domains has also been observed by dark-field (DF) transmission electron microscopy [18]. In consequence, the total ordered volume fraction has been determined by combining DF images from three

Magnetic coupling mechanisms in particle/thin film composite systems

• Giovanni A. Badini Confalonieri,
• Philipp Szary,
• Durgamadhab Mishra,
• Maria J. Benitez,
• Mathias Feyen,
• An Hui Lu,
• Leonardo Agudo,
• Gunther Eggeler,
• Oleg Petracic and
• Hartmut Zabel

Beilstein J. Nanotechnol. 2010, 1, 101–107, doi:10.3762/bjnano.1.12

• and the FM layer. This CoO layer is estimated to be between 1 to 4 nm thick. Although it was not possible to resolve such a CoO layer from the high-resolution TEM images (Figure 2), dark-field TEM images (Figure 4a) reveal the presence of a crystalline ~4 nm thick layer being well distinguishable from

• panel: AFM images of the Co surface for the non-ion-milled (c) and ion-milled (d) samples. Magnetic hysteresis loops at 330 K and 15 K for a monolayer film of nanoparticles (a) and the composite nanoparticle/Co film non-ion-milled (b) and after ion-milling (c). (a) Dark-field TEM image of the cross