Theranostic potential of self-luminescent branched polyethyleneimine-coated superparamagnetic iron oxide nanoparticles

• Rouhollah Khodadust,
• Ozlem Unal and
• Havva Yagci Acar

Beilstein J. Nanotechnol. 2022, 13, 82–95, doi:10.3762/bjnano.13.6

• aggregate to minimize their high surface energies [59]. Therefore, electrostatic and steric repulsion need to be created between SPIONs to prevent agglomeration and produce a stable nanoparticle. It was also demonstrated that peptization prevents agglomeration, paving the way for the production of

• the hydrodynamic radius by preventing agglomeration and increasing stabilization of the nanoparticles. The zeta potential values of SPION@bPEI and SPION@bPEI-Erb were measured to be +35.2 mV and +29.1 mV, respectively (Supporting Information File 1, Table S1), which is expected since the conjugation

Sputtering onto liquids: a critical review

• Anastasiya Sergievskaya,
• Adrien Chauvin and
• Stephanos Konstantinidis

Beilstein J. Nanotechnol. 2022, 13, 10–53, doi:10.3762/bjnano.13.2

• reversible agglomeration, irreversible aggregation, or Ostwald ripening (Figure 7) [77][79][80][83][110]. When agglomerates or aggregates form a precipitate in colloidal solution, the process is called coagulation. The fact that such secondary processes take place in a colloidal solution of primary metal NPs

Biocompatibility and cytotoxicity in vitro of surface-functionalized drug-loaded spinel ferrite nanoparticles

• Sadaf Mushtaq,
• Khuram Shahzad,
• Tariq Saeed,
• Anwar Ul-Hamid,
• Bilal Haider Abbasi,
• Nafees Ahmad,
• Waqas Khalid,
• Muhammad Atif,
• Zulqurnain Ali and
• Rashda Abbasi

Beilstein J. Nanotechnol. 2021, 12, 1339–1364, doi:10.3762/bjnano.12.99

• , magnetite NPs have some serious limitations, such as chemical reactivity, rapid oxidation, particle agglomeration, and high surface energy which may affect their biocompatibility and performance [11]. Moreover, they have low magnetization at a smaller size and the presence of iron has been associated with

• chemistry of NPs, thereby affecting their physiochemical and biological properties [11][20]. In the present work, we synthesized a variety of MFe2O4 (M = Co, Ni, and Zn) NPs using the sonochemical technique. Particle agglomeration was prevented by using oleic acid as the surfactant [21]. Phase change of

Identifying diverse metal oxide nanomaterials with lethal effects on embryonic zebrafish using machine learning

• Richard Liam Marchese Robinson,
• Haralambos Sarimveis,
• Philip Doganis,
• Xiaodong Jia,
• Marianna Kotzabasaki,
• Christiana Gousiadou,
• Stacey Lynn Harper and
• Terry Wilkins

Beilstein J. Nanotechnol. 2021, 12, 1297–1325, doi:10.3762/bjnano.12.97

• characteristics related to intermolecular interactions, which could affect agglomeration or uptake by cells, and reactivity, which could trigger toxicity. (Dummy values, lower than the minimum of observed values, were inserted where the corresponding coating was absent, in keeping with recommended practice [45

Enhancement of the piezoelectric coefficient in PVDF-TrFe/CoFe₂O₄ nanocomposites through DC magnetic poling

• Marco Fortunato,
• Alessio Tamburrano,
• Maria Paola Bracciale,
• Maria Laura Santarelli and
• Maria Sabrina Sarto

Beilstein J. Nanotechnol. 2021, 12, 1262–1270, doi:10.3762/bjnano.12.93

•  6b,c shows the aggregation of CoFe2O4 nanoparticles in some areas, in analogy with what has been reported in [25]. The formation of aggregates was confirmed by energy-dispersive X-ray spectroscopy (EDX). In correspondence with the agglomeration we observed a higher intensity of the O, Fe, and Co

Irradiation-driven molecular dynamics simulation of the FEBID process for Pt(PF₃)₄

• Alexey Prosvetov,
• Alexey V. Verkhovtsev,
• Gennady Sushko and
• Andrey V. Solov’yov

Beilstein J. Nanotechnol. 2021, 12, 1151–1172, doi:10.3762/bjnano.12.86

• substrate atoms, causing agglomeration of Pt atoms at specific sites. In this case, the covalent interaction between Pt atoms and atoms of the SiO2 can be described using the well-established interatomic potentials [31]. These effects can be addressed by the presented methodology in future studies. The van

Criteria ruling particle agglomeration

• Dieter Vollath

Beilstein J. Nanotechnol. 2021, 12, 1093–1100, doi:10.3762/bjnano.12.81

• Dieter Vollath NanoConsulting, Primelweg 3, 76297 Stutensee, Germany 10.3762/bjnano.12.81 Abstract Most of the technically important properties of nanomaterials, such as superparamagnetism or luminescence, depend on the particle size. During synthesis and handling of nanoparticles, agglomeration

• may occur. Agglomeration of nanoparticles may be controlled by different mechanisms. During synthesis one observes agglomeration controlled by the geometry and electrical charges of the particles. Additionally, one may find agglomeration controlled by thermodynamic interaction of the particles in the

• of an agglomerated ensemble, that is, an exponential function characterized by two parameters. In this context, it is important to realize that one has to take care of fluctuations of the entropy. Keywords: agglomeration; enthalpy; entropy; simulation; surface energy; van der Waals interaction

The role of deep eutectic solvents and carrageenan in synthesizing biocompatible anisotropic metal nanoparticles

• Nabojit Das,
• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2021, 12, 924–938, doi:10.3762/bjnano.12.69

• , and morphology of the products in chemical synthesis. This is also evident from the studies tabulated in Table 2, where the obtained shapes are given together with the eutectic mixture and precursor material used [79][80][81][82][83][84][85][86][87]. The aggregation/agglomeration of nanoparticles in

Silver nanoparticles nucleated in NaOH-treated halloysite: a potential antimicrobial material

• Yuri B. Matos,
• Rodrigo S. Romanus,
• Mattheus Torquato,
• Edgar H. de Souza,
• Rodrigo L. Villanova,
• Marlene Soares and
• Emilson R. Viana

Beilstein J. Nanotechnol. 2021, 12, 798–807, doi:10.3762/bjnano.12.63

• + ions or growing up to the micrometer scale. Some routes stabilize Ag-NPs by nucleating silver into clay substrates [15][16], such as kaolinite [17][18][19], montmorillonite [18][19][20][21], and halloysite nanotubes [22][23][24]. The advantages are, for instance, preventing particle agglomeration

Recent progress in magnetic applications for micro- and nanorobots

• Ke Xu,
• Shuang Xu and
• Fanan Wei

Beilstein J. Nanotechnol. 2021, 12, 744–755, doi:10.3762/bjnano.12.58

• avoid the reassembly of the chains. Doherty et al. [38] pointed out that superparamagnetic nanofibers could prevent the uncontrolled agglomeration of particles because the residual magnetization of this material is almost zero. They applied this technology to sensing and environmental remediation and

Prediction of Co and Ru nanocluster morphology on 2D MoS₂ from interaction energies

• Cara-Lena Nies and
• Michael Nolan

Beilstein J. Nanotechnol. 2021, 12, 704–724, doi:10.3762/bjnano.12.56

• -quality, conformal thin films with low resistivity, to avoid many of the typical failure mechanisms such as electromigration [42][43]. This means that 3D migration of atoms (agglomeration) should be inhibited, while 2D growth (wetting) should be promoted. In contrast, in catalysis applications the ratio

• of surface to bulk is of great importance in promoting catalytic activity. Therefore, 3D growth (agglomeration) is essential when creating a supported metal catalyst [44][45][46][47]. In this work we aim to determine the atomic-scale interactions that control the stability of small Con and Run

• Ru and MoS2 could be enough to prevent agglomeration. As Ru was less likely to incorporate into the ML on a defective ML, growth of Ru on a defective MoS2 ML could be suitable for Ru interconnect systems. Conclusion We have presented an extensive study of the interaction of Con and Run species, with

Fate and transformation of silver nanoparticles in different biological conditions

• Barbara Pem,
• Marija Ćurlin,
• Darija Domazet Jurašin,
• Valerije Vrček,
• Rinea Barbir,
• Vedran Micek,
• Raluca M. Fratila,
• Jesus M. de la Fuente and
• Ivana Vinković Vrček

Beilstein J. Nanotechnol. 2021, 12, 665–679, doi:10.3762/bjnano.12.53

• will not be retained in biological media [9][10][11][12][13][14]. In biological media, AgNPs may be transformed into different forms by aggregation, agglomeration, dissolution, interaction with biomolecules, or generation of reactive oxygen species (ROS) that may lead to the coexistence of

• Supporting Information File 1, Table S2. Although differences in the agglomeration behaviour among different AgNPs were observed depending on the dispersion media, an increase in agglomeration was generally observed in media with a higher ionic strength (CCM, mCYS, mGSH, ALF, and AGF, see Table 1). Such

• behaviour can be attributed to the loss of electrostatic repulsion between particles due to the complexation with counter ions present in media with high ionic strength [8][47]. The presence of proteins prevented AgNP agglomeration in m(CCM+BSA), m(CYS+BSA), m(GSH+BSA) due to the formation of protein corona

High-yield synthesis of silver nanowires for transparent conducting PET films

• Gul Naz,
• Hafsa Asghar,
• Muhammad Ramzan,
• Muhammad Arshad,
• Rashid Ahmed,
• Muhammad Bilal Tahir,
• Bakhtiar Ul Haq,
• Nadeem Baig and
• Junaid Jalil

Beilstein J. Nanotechnol. 2021, 12, 624–632, doi:10.3762/bjnano.12.51

• diameter, ethylene glycol (EG) was used as a solvent and also acted as a reducer. Silver nitrate (AgNO3) was used as source of silver. The stabilizer used in the reaction was PVP, which also acted as a capping agent. In addition to stabilizing and capping, PVP also prevented the agglomeration of silver

Stability and activity of platinum nanoparticles in the oxygen electroreduction reaction: is size or uniformity of primary importance?

• Kirill O. Paperzh,
• Anastasia A. Alekseenko,
• Vadim A. Volochaev,
• Ilya V. Pankov,
• Olga A. Safronenko and
• Vladimir E. Guterman

Beilstein J. Nanotechnol. 2021, 12, 593–606, doi:10.3762/bjnano.12.49

• (less than 3 nm in size) [14][20], reprecipitation of platinum from small NPs into larger ones [14][21][22], agglomeration of NPs in the process of their surface diffusion [9][22], and NP shape change [4][23]. This can happen due to the oxidation of the carbon carrier, which causes the detachment of

• increasing NP size [14][22][32][33][34][35][36]. The probability of agglomeration and coalescence of NPs during a stress test also decreases with an increase in the average distance between platinum NPs in catalysts, which results in an increase of their stability [14]. Apparently, a relatively high

The preparation temperature influences the physicochemical nature and activity of nanoceria

• Robert A. Yokel,
• Wendel Wohlleben,
• Johannes Georg Keller,
• Matthew L. Hancock,
• Jason M. Unrine,
• D. Allan Butterfield and
• Eric A. Grulke

Beilstein J. Nanotechnol. 2021, 12, 525–540, doi:10.3762/bjnano.12.43

• contrast, solvothermally synthesized nanoceria was coated with, on average, a monolayer of citrate, intentionally applied to inhibit agglomeration [35]. It is assumed that the citrate coating was dissolved as surface cerium ions were solubilized. The reduction in absolute zeta potential of the partially

A review on nanostructured silver as a basic ingredient in medicine: physicochemical parameters and characterization

• Gabriel M. Misirli,
• Kishore Sridharan and
• Shirley M. P. Abrantes

Beilstein J. Nanotechnol. 2021, 12, 440–461, doi:10.3762/bjnano.12.36

• polyol synthesis method involves the reduction of a metal salt in the presence of a boiling solvent at elevated temperatures (>160 °C). In order to protect the nucleated particles and avoid agglomeration, the most commonly used adjuvant is PVP [139]. One of the advantages of this method is that ethylene

Solution combustion synthesis of a nanometer-scale Co₃O₄ anode material for Li-ion batteries

• Monika Michalska,
• Huajun Xu,
• Qingmin Shan,
• Shiqiang Zhang,
• Yohan Dall'Agnese,
• Yu Gao,
• Amrita Jain and
• Marcin Krajewski

Beilstein J. Nanotechnol. 2021, 12, 424–431, doi:10.3762/bjnano.12.34

• temperatures and leads to the decomposition of the fuel resulting in the formation of gaseous by-products, such as CO2, NO2, or NH3, and the generation of heat. On one hand, this initiates a foaming reaction, on the other hand, this prevents from grain growth and agglomeration processes [10][42][43][45][46][47

• ][48][49][50]. Therefore, one of the advantages of this method is that the obtained materials are usually well-crystalline fine-grained powders with a low degree of agglomeration. Besides that, the SCS method is a one-step process that does not need additional post-reaction treatments, for instance

Colloidal particle aggregation: mechanism of assembly studied via constructal theory modeling

• Scott C. Bukosky,
• Sukrith Dev,
• Monica S. Allen and
• Jeffery W. Allen

Beilstein J. Nanotechnol. 2021, 12, 413–423, doi:10.3762/bjnano.12.33

• natural coalescence, is decreased faster and more efficiently when the masses coalesce non-uniformly toward a state of equilibrium [10]. Similarly, Reis et al. used these principles to analyze how the electrostatic interactions between dust particles are minimized during particle agglomeration in air

Exploring the fabrication and transfer mechanism of metallic nanostructures on carbon nanomembranes via focused electron beam induced processing

• Christian Preischl,
• Linh Hoang Le,
• Elif Bilgilisoy,
• Armin Gölzhäuser and
• Hubertus Marbach

Beilstein J. Nanotechnol. 2021, 12, 319–329, doi:10.3762/bjnano.12.26

• the precursor molecules (Figure 1d). Assuming that the two described methods are effective, an initial well-defined local deposit is formed in both cases (Figure 1e). Upon further precursor dosage, the AG process occurs and leads to further agglomeration of material on top of the initial deposit

The patterning toolbox FIB-o-mat: Exploiting the full potential of focused helium ions for nanofabrication

• Victor Deinhart,
• Lisa-Marie Kern,
• Jan N. Kirchhof,
• Sabrina Juergensen,
• Joris Sturm,
• Enno Krauss,
• Thorsten Feichtner,
• Sviatoslav Kovalchuk,
• Michael Schneider,
• Dieter Engel,
• Bastian Pfau,
• Bert Hecht,
• Kirill I. Bolotin,
• Stephanie Reich and
• Katja Höflich

Beilstein J. Nanotechnol. 2021, 12, 304–318, doi:10.3762/bjnano.12.25

• , large ion doses lead to gas agglomeration and the formation of bubbles, manifesting as strong surface swelling [23]. Furthermore, the associated sputter rate of light ions is roughly an order of magnitude smaller than that of Ga ions [21][22]. In addition, the low ion mass has further implications. The

Characterization, bio-uptake and toxicity of polymer-coated silver nanoparticles and their interaction with human peripheral blood mononuclear cells

• Sahar Pourhoseini,
• Reilly T. Enos,
• Angela E. Murphy,
• Bo Cai and
• Jamie R. Lead

Beilstein J. Nanotechnol. 2021, 12, 282–294, doi:10.3762/bjnano.12.23

• that aggregation played a large role in NP transformations, except at high concentrations, due to protection by the PVP, and at later times because of possible protein interactions in the RPMI medium [38][39]. This result is in agreement with previous studies that found that aggregation/agglomeration

• NP agglomeration immediately before exposure. The plates were then incubated for 24 h at 37 °C and 5% CO2. Each exposure study was run in triplicate. After 24 h each well was collected, and the cells and supernatant were separated using a centrifuge (300g, 10 min). The supernatant was used for Ag

TiO_x/Pt₃Ti(111) surface-directed formation of electronically responsive supramolecular assemblies of tungsten oxide clusters

• Marco Moors,
• Yun An,
• Agnieszka Kuc and
• Kirill Yu. Monakhov

Beilstein J. Nanotechnol. 2021, 12, 203–212, doi:10.3762/bjnano.12.16

• scaffold of W3O9 units. By applying scanning tunneling microscopy to the W3O9–(W3O9)6 structures, individual units underwent a tip-induced reduction to W3O8. At elevated temperatures, agglomeration and growth of large WO3 islands, which thickness is strongly limited to a maximum of two unit cells, were

• at elevated temperatures, which allows for an energy contact by agglomeration due to strong intermolecular interactions. After annealing the sample at 900 K, the formation of larger islands is observed. The thickness of these islands is always approx. 0.6 nm, which indicates the formation of a WO3

A review on the green and sustainable synthesis of silver nanoparticles and one-dimensional silver nanostructures

• Sina Kaabipour and
• Shohreh Hemmati

Beilstein J. Nanotechnol. 2021, 12, 102–136, doi:10.3762/bjnano.12.9

• unique surface characteristics [228]. Therefore, for safe biological applications (i.e. in the medical and food industry), this approach would be preferred as an alternative for methods that necessarily require the use of chemical stabilizers [108][112]. In addition, the small NP size, low agglomeration

• agglomeration, higher purity, and higher crystallinity compared to those produced by chemical methods [230]. The method is simple and reproducible [230]; however, the process runs using high operating temperatures, and more specifically, the center of the reaction tube may not reach the setpoint temperature due

• to the short residence time inside the reactor and finite heat transfer from the wall [124]. In general, although physical methods can produce nanoparticles with high purity, most of them are very expensive and may lead to agglomeration of products [140]. Based on all the disadvantages explained here

Fusion of purple membranes triggered by immobilization on carbon nanomembranes

• René Riedel,
• Natalie Frese,
• Fang Yang,
• Martin Wortmann,
• Raphael Dalpke,
• Daniel Rhinow,
• Norbert Hampp and
• Armin Gölzhäuser

Beilstein J. Nanotechnol. 2021, 12, 93–101, doi:10.3762/bjnano.12.8

• no fusion but rather agglomeration is observed. Above 10 V, the patches seem to decay into smaller pieces, see Figure S4, Supporting Information File 1. A voltage of 5 V is optimal regarding the fusion results as shown in Figure 3. OD had to be low to prevent cluster formation. The number of merged

The role of gold atom concentration in the formation of Cu–Au nanoparticles from the gas phase

• Yuri Ya. Gafner,
• Svetlana L. Gafner,
• Darya A. Ryzkova and
• Andrey V. Nomoev

Beilstein J. Nanotechnol. 2021, 12, 72–81, doi:10.3762/bjnano.12.6

• simulation and the data on the size distribution of Cu3Au clusters obtained by laser deposition [3]. An analysis of the shape and distribution of the Cu3Au clusters on the substrate indicates that the agglomeration processes were suppressed in this case [3]. The reason for that may be the wide spatial

• linear shape, obtained by the agglomeration of many primary clusters. Therefore, its true size can be much larger. Consequently, we can conclude that with the chosen simulation parameters (i.e., the size of the system and the number of atoms contained in it) it was possible to repeat the results obtained

• approximate diameter value of the spherical cluster (D = 4.61 nm). In addition to this basic group, another five particles with a size of up to 17000 atoms were discovered, which were formed by agglomeration at sufficiently low temperatures. We observed a similar pattern for all of the heat energy removal