Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration

• Se-Kwon Kim,
• Sesha Subramanian Murugan,
• Pandurang Appana Dalavi,
• Sebanti Gupta,
• Sukumaran Anil,
• Gi Hun Seong and
• Jayachandran Venkatesan

Beilstein J. Nanotechnol. 2022, 13, 1051–1067, doi:10.3762/bjnano.13.92

• -63 cells, Saos-2 cells, and human osteoblasts, demonstrating its significance in bone tissue engineering [54]. Lemos and colleagues synthesized nanocomposite films comprising chitosan and bioactive glass, as well as a hybrid composition of chitosan and bioactive glass. The chitosan with 20% of

Spindle-like MIL101(Fe) decorated with Bi₂O₃ nanoparticles for enhanced degradation of chlortetracycline under visible-light irradiation

• Chen-chen Hao,
• Fang-yan Chen,
• Kun Bian,
• Yu-bin Tang and
• Wei-long Shi

Beilstein J. Nanotechnol. 2022, 13, 1038–1050, doi:10.3762/bjnano.13.91

• , FEI-quanta 200, Japan Electronics, Japan), transmission electron microscopy (TEM, FEI-Tecnai F20, USA) and high-resolution transmission electron microscopy (HRTEM, JEOL 2100F, Japan). The element valence and chemical composition was investigated using X-ray photoelectron spectroscopy (XPS, Axis ultra

Electrocatalytic oxygen reduction activity of AgCoCu oxides on reduced graphene oxide in alkaline media

• Iyyappan Madakannu,
• Indrajit Patil,
• Bhalchandra Kakade and
• Kasibhatta Kumara Ramanatha Datta

Beilstein J. Nanotechnol. 2022, 13, 1020–1029, doi:10.3762/bjnano.13.89

• AgCuCo (0.6:1.5:1.5, 2:1:1, and 6:1:1) oxide NPs supported on a reduced graphene oxide (rGO) matrix. Morphology, composition, and functional groups were methodically analysed using various microscopic and spectroscopic techniques. The as-prepared electrocatalysts were employed as cathode substrates for

• -workers reported the ORR activity of Ag–Co NPs dispersed on Vulcan XC72 carbon by incipient-wetness impregnation [22]. In general, the addition of a third metal to a bimetallic composition is considered to be an effective method to augment the absorption energy and improve the kinetics of the ORR [23]. Gu

• electrochemical active surface area (ECSA) of 66.92 m2·g−1 and a mass activity of 40.55 mA·mg−1. We investigated bonding nature, composition, and morphology of the ACC-2 sample using XPS and TEM. The material is electrochemically stable up to 10,000 potential cycles, highlighting the durability of the

Interaction between honeybee mandibles and propolis

• Leonie Saccardi,
• Franz Brümmer,
• Jonas Schiebl,
• Oliver Schwarz,
• Alexander Kovalev and
• Stanislav Gorb

Beilstein J. Nanotechnol. 2022, 13, 958–974, doi:10.3762/bjnano.13.84

• , Altstätten, Switzerland). After the wax was cured, the mandibles were removed from the mould, the cavity was filled with Spurr epoxy resin (Spurr’s low viscosity kit; Plano, Wetzlar, Germany, composition: vinyl cyclohexene dioxide 10 g, diglycidyl ether of polypropylene glycol 6 g, nonenyl succinic anhydride

Design of a biomimetic, small-scale artificial leaf surface for the study of environmental interactions

• Miriam Anna Huth,
• Axel Huth,
• Lukas Schreiber and
• Kerstin Koch

Beilstein J. Nanotechnol. 2022, 13, 944–957, doi:10.3762/bjnano.13.83

• composition play significant roles. Here, the ability of self-assembly of wax after isolation from the leaves was used to develop a small-scale wax-coated artificial leaf surface with the chemical composition and wettability of wheat (Triticum aestivum) leaves. By thermal evaporation of extracted plant waxes

• (e.g., applied surfactants) interactions on natural leaf surfaces, the chemical composition and the wetting behavior should be the same in both. Therefore, the morphology, chemistry, and wetting properties of natural and artificial surfaces with recrystallized wax structures were analyzed by scanning

• wetting properties of a natural leaf surface. Keywords: recrystallization; surface properties; wax composition; wetting; wheat; Introduction Cuticle One of the largest interfaces on earth is formed by thin layers that are a few nanometers to micrometers thin, namely the wax layers of the plant cuticle

Bioselectivity of silk protein-based materials and their bio-inspired applications

• Hendrik Bargel,
• Vanessa T. Trossmann,
• Christoph Sommer and
• Thomas Scheibel

Beilstein J. Nanotechnol. 2022, 13, 902–921, doi:10.3762/bjnano.13.81

• composition, surface structuring on the micro-/nanoscale, and the introduction of low-surface-energy compounds [62]. Various studies demonstrated that the adhesion of Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli (E. coli) bacteria was significantly reduced on superhydrophobic coatings

• proteins (HDPs) was coined [89]. HDPs are rich in cationic amino acids (e.g., arginine and lysine), and amino acids with hydrophobic side chains (e.g., tryptophan, phenylalanine, tyrosine, leucine, isoleucine, and valine). This composition renders them amphiphilic, which is crucial to their mode of action

Numerical modeling of a multi-frequency receiving system based on an array of dipole antennas for LSPE-SWIPE

• Alexander V. Chiginev,
• Anton V. Blagodatkin,
• Dmitrii A. Pimanov,
• Ekaterina A. Matrozova,
• Anna V. Gordeeva,
• Andrey L. Pankratov and
• Leonid S. Kuzmin

Beilstein J. Nanotechnol. 2022, 13, 865–872, doi:10.3762/bjnano.13.77

• of Sciences, GSP-105, Nizhny Novgorod, 603950, Russia Chalmers University of Technology, Department of Microtechnology and Nanoscience - MC2, Gothenburg, SE-412 96, Sweden 10.3762/bjnano.13.77 Abstract Here we present the results of a numerical modeling of mode composition in the constriction of the

• composition in the horn constriction at the incidence plane of a linearly polarized plane wave The parameters of the back-to-back horn are defined in [3]. They consist of two openings and a constriction connecting them, see the details in [3] and a part of the horn in Figure 1. One of the openings defines the

• radiation pattern of the receiving system, and the other is facing the receiving antenna array. The constriction of the horn determines the modal composition of the electromagnetic field passing through the horn. For a given constriction diameter, up to 38 modes of a circular waveguide are propagating in

Ultrafast signatures of magnetic inhomogeneity in Pd_1−xFe_x (x ≤ 0.08) epitaxial thin films

• Andrey V. Petrov,
• Sergey I. Nikitin,
• Lenar R. Tagirov,
• Amir I. Gumarov,
• Igor V. Yanilkin and
• Roman V. Yusupov

Beilstein J. Nanotechnol. 2022, 13, 836–844, doi:10.3762/bjnano.13.74

• domain structures of the films [36]. Smaller-scale fluctuations, due to intrinsic disorder in the alloy composition, still remain unexplored. Finding a way to achieve magnetic uniformity in Pd1−xFex down to the atomic scale is a challenge. One of the options is the selection of the concentration range of

• beam epitaxy (MBE). The films were 20 nm thick, continuous, and smooth monocrystalline layers. The MBE equipment provided uniformity of the film thickness within 3% on the 1″ lateral size. The film composition x was measured in situ using X-ray photoelectron spectroscopy (all from SPECS, Berlin) with a

• amplitude , which strongly depends on the composition of the film (see Figure 4a). Going deeper into the details, the amplitude for the sample with x = 0.038 increases with decreasing temperature in the entire range of 5 K ≤ T < TC. For samples with x = 0.062 and 0.080, this amplitude reaches a maximum

Temperature and chemical effects on the interfacial energy between a Ga–In–Sn eutectic liquid alloy and nanoscopic asperities

• Yujin Han,
• Pierre-Marie Thebault,
• Corentin Audes,
• Xuelin Wang,
• Haiwoong Park,
• Jian-Zhong Jiang and
• Arnaud Caron

Beilstein J. Nanotechnol. 2022, 13, 817–827, doi:10.3762/bjnano.13.72

• -/nanotechnology. The surface chemical composition of the liquid alloy was measured by X-ray photoelectric spectroscopy before and after heating to 100 °C for 3 h. Furthermore, we imaged the nanoscopic asperities after measurements on the metallic liquid alloy by SEM to evidence possible liquid residues. For all

• prepared a eutectic Ga–In–Sn liquid alloy by melting the mixture of its solid constituents with the composition of 78.8 atom % Ga, 13.2 atom % In, and 8 atom % Sn. The melting point of the alloy is approximately 283 K [17]. We measured the interfacial tension between the Ga–In–Sn liquid eutectic alloy and

• liquid sample by fitting the function to our experimental data. The chemical composition of the eutectic Ga–In–Sn liquid alloy sample was determined by photoelectronic X-ray spectroscopy (XPS) before and after heating in air at 100 °C for 3 h. The spectrograms were recorded with a K-alpha+ XPS system

Efficient liquid exfoliation of KP₁₅ nanowires aided by Hansen's empirical theory

• Zhaoxuan Huang,
• Zhikang Jiang,
• Nan Tian,
• Disheng Yao,
• Fei Long,
• Yanhan Yang and
• Danmin Liu

Beilstein J. Nanotechnol. 2022, 13, 788–795, doi:10.3762/bjnano.13.69

• improved by adjusting the composition and type of solutions used in the liquid-phase exfoliation [15][16][17]. This theory has been successfully used for improving the exfoliation efficiency in several low-dimensional materials, such as carbon, graphene, metal oxides, and fibrous phosphorus. [18]. In a

Gelatin nanoparticles with tunable mechanical properties: effect of crosslinking time and loading

• Agnes-Valencia Weiss,
• Daniel Schorr,
• Julia K. Metz,
• Metin Yildirim,
• Saeed Ahmad Khan and
• Marc Schneider

Beilstein J. Nanotechnol. 2022, 13, 778–787, doi:10.3762/bjnano.13.68

• optimal treatment. Therefore, the characteristics of nanoparticles regarding mechanical properties, size, surface charge, surface composition, and degradation and drug release mechanisms must be considered during formulation development [1]. Except for the mechanical properties, the research activities do

A nonenzymatic reduced graphene oxide-based nanosensor for parathion

• Sarani Sen,
• Anurag Roy,
• Ambarish Sanyal and
• Parukuttyamma Sujatha Devi

Beilstein J. Nanotechnol. 2022, 13, 730–744, doi:10.3762/bjnano.13.65

• composition of the electrolyte were optimized to increase the deoxygenation of the GO sheet during ERGO formation. Figure 1B depicts three significant Raman peaks of GO at 1350 cm−1 for the D band (associated with defects in the sp2 lattice), 1596 cm−1 for the G band (due to vibrations of the hexagonal

• : Chemical sample table indicating corresponding CAS, supplier and other details. Table S2: Experimental sample table for composition analysis using binding energies of GO and RGO by XPS. Table S3: Experimental sample table for the modified glassy carbon electrode electrochemical characteristics. Figure S1

Design and selection of peptides to block the SARS-CoV-2 receptor binding domain by molecular docking

• Kendra Ramirez-Acosta,
• Ivan A. Rosales-Fuerte,
• J. Eduardo Perez-Sanchez,
• Alfredo Nuñez-Rivera,
• Josue Juarez and
• Ruben D. Cadena-Nava

Beilstein J. Nanotechnol. 2022, 13, 699–711, doi:10.3762/bjnano.13.62

• versus the binding energy of the OAP–RBD complexes (Figure 5a) and is divided into three regions. Region I shows the peptides that have binding energy values similar to the ACE2 binding energy (−4.6 kcal/mol), such as P9 (secondary structure composition 0.75 α-helix and 0.25 random coil) and P12 (fully

Nanoarchitectonics of the cathode to improve the reversibility of Li–O₂ batteries

• Hien Thi Thu Pham,
• Jonghyeok Yun,
• So Yeun Kim,
• Sang A Han,
• Jung Ho Kim,
• Jong-Won Lee and
• Min-Sik Park

Beilstein J. Nanotechnol. 2022, 13, 689–698, doi:10.3762/bjnano.13.61

• for lowering the overpotential of the cathode during cycling, even at the high current density of 2,000 mA·g−1. Keywords: cathode composition; electrochemistry; Li–O2 battery; metal–organic framework; nanoarchitectonics; zeolitic imidazolate framework; Introduction Recently, lithium–oxygen batteries

• using Zn and Co acetates, together with 2-methylimidazolate, as described in Figure 1a. The hydrothermal process is beneficial for facilitating the nucleation and growth of bimetallic ZIF as well as reducing the synthesis time. The chemical composition of ZnxCoy particles was controlled by adjusting the

• the chemical composition of ZnxCoy particles. It is expected that it would play an important role as an electrocatalyst in the composites for lowering the overpotential for the given electrochemical reactions. For further inspection of the structural characteristics, the surface chemistry of ZnxCoy–C

Sodium doping in brookite TiO₂ enhances its photocatalytic activity

• Boxiang Zhuang,
• Honglong Shi,
• Honglei Zhang and
• Zeqian Zhang

Beilstein J. Nanotechnol. 2022, 13, 599–609, doi:10.3762/bjnano.13.52

• , the reaction rate constant in this report was about three times higher than that of the quasi-spherical brookite TiO2 (k = 0.0206) [22]. The excellent photocatalytic activity can be correlated with the crystal structure, micromorphology, and chemical composition [23][24][25]. The bandgap is useful to

• bandgap values of these four samples. Structural phase diagram, chemical composition, and morphology The crystal structure of samples calcinated at 300–900 °C was characterized by powder X-ray diffraction (XRD), as shown in Figure 3a. The sample calcinated at 300 °C is a mixture of brookite (B) and

• behavior. This report shows that sodium can be doped in brookite TiO2 by the conventional hydrothermal method, meaning that other alkali anions are also expected to form the brookite AxTi1−xO2 (A = Na, K, Ca). We suggest giving more attention to the local atomic structure and the chemical composition of

Effects of substrate stiffness on the viscoelasticity and migration of prostate cancer cells examined by atomic force microscopy

• Xiaoqiong Tang,
• Yan Zhang,
• Jiangbing Mao,
• Yuhua Wang,
• Zhenghong Zhang,
• Zhengchao Wang and
• Hongqin Yang

Beilstein J. Nanotechnol. 2022, 13, 560–569, doi:10.3762/bjnano.13.47

• PC-3 cells on substrates of different stiffness with or without blebbistatin. (c) Force–distance graph of cells; “ns” means no difference, ** represents the value of P < 0.01, *** represents the value of P < 0.001. Composition ratio of polyacrylamide hydrogel substrates with different stiffness

Ciprofloxacin-loaded dissolving polymeric microneedles as a potential therapeutic for the treatment of S. aureus skin infections

• Sharif Abdelghany,
• Walhan Alshaer,
• Yazan Al Thaher,
• Maram Al Fawares,
• Amal G. Al-Bakri,
• Saja Zuriekat and
• Randa SH. Mansour

Beilstein J. Nanotechnol. 2022, 13, 517–527, doi:10.3762/bjnano.13.43

• isocratic composition of 0.025 M phosphoric acid (pH 3.0 ± 0.1) previously adjusted with triethylamine/acetonitrile (80:20 v/v), eluted at a flow rate of 1.5 mL/min. The injection volume was 20 µL. The drug concentration was then determined according to a calibration curve. The calibration curve was plotted

Design and characterization of polymeric microneedles containing extracts of Brazilian green propolis

• Camila Felix Vecchi,
• Rafaela Said dos Santos,
• Jéssica Bassi da Silva and
• Marcos Luciano Bruschi

Beilstein J. Nanotechnol. 2022, 13, 503–516, doi:10.3762/bjnano.13.42

• Abstract Microneedles (MNs) are a means to break the protective skin barrier in a minimally invasive way. By creating temporary micropores, they make biologically active agents available in the skin layers. Propolis (PRP) is a gum resin with a complex chemical composition, produced by bees Apis mellifera L

• compression area (the work required to deform the sample during compression) were calculated using the software Texture Exponent 6.1.12.0 (Stable Micro Systems, Surrey, UK). Puncture The effect of formulation composition on the puncture force and distance was evaluated by MN insertion study. The best

Ethosomal (−)-epigallocatechin-3-gallate as a novel approach to enhance antioxidant, anti-collagenase and anti-elastase effects

• Çiğdem Yücel,
• Gökçe Şeker Karatoprak,
• Sena Yalçıntaş and
• Tuğba Eren Böncü

Beilstein J. Nanotechnol. 2022, 13, 491–502, doi:10.3762/bjnano.13.41

• high amounts of ethanol that can carry both hydrophilic and lipophilic drug molecules. They are also highly deformable and reach deep skin layers [18][19]. ETHs are similar to the lipid bilayer composition of cells in the epidermis, due to the presence of phospholipids in their structure, and thus

• penetration through the skin due to the ethanol in their composition [22]. In the current study, ethosomal formulations of EGCG with strong antioxidant properties were developed and their efficiencies were assessed and compared to the EGCG solution form. Six different ethosomal formulations were developed and

• systems, and the effects of changes in the composition of the formulations on their characterization were examined. It was emphasized that appropriate optimization of vesicular systems is necessary to yield their therapeutic efficacy in topical applications [32]. In another study, an ethosomal formulation

Tubular glassy carbon microneedles with fullerene-like tips for biomedical applications

• Sharali Malik and
• George E. Kostakis

Beilstein J. Nanotechnol. 2022, 13, 455–461, doi:10.3762/bjnano.13.38

• it contains essentially only carbon atoms, its structure can be varied at all size levels.” More recently, S. Sharma in a review of glassy carbon materials concluded that “it has been confirmed by both theoretical and experimental investigation that the chemical composition of the polymer plays the

A non-enzymatic electrochemical hydrogen peroxide sensor based on copper oxide nanostructures

• Irena Mihailova,
• Vjaceslavs Gerbreders,
• Marina Krasovska,
• Eriks Sledevskis,
• Valdis Mizers,
• Andrejs Bulanovs and
• Andrejs Ogurcovs

Beilstein J. Nanotechnol. 2022, 13, 424–436, doi:10.3762/bjnano.13.35

• nanostructures were obtained by a one-step hydrothermal oxidation method. The resulting coating is uniform and dense and shows good adhesion to the wire surface. Structure, surface, and composition of the obtained samples were studied using field-emission scanning electron microscopy along with energy-dispersive

• of the nanostructured CuO samples was studied via field-emission scanning electron microscopy (FESEM, Tescan MAIA 3). The chemical composition analysis was performed via energy-dispersive spectroscopy (EDS, Inca Synergy) integrated into the FESEM system. The crystalline structure of the samples was

Effect of sample treatment on the elastic modulus of locust cuticle obtained by nanoindentation

• Chuchu Li,
• Stanislav N. Gorb and
• Hamed Rajabi

Beilstein J. Nanotechnol. 2022, 13, 404–410, doi:10.3762/bjnano.13.33

• complex relationship between multiple factors, such as microstructure, material composition, and sclerotization, has provided cuticle with properties that are unique to this biological material. Understanding the mechanisms behind the remarkable properties of cuticle can inspire the design of engineering

Electrostatic pull-in application in flexible devices: A review

• Teng Cai,
• Yuming Fang,
• Yingli Fang,
• Ruozhou Li,
• Ying Yu and
• Mingyang Huang

Beilstein J. Nanotechnol. 2022, 13, 390–403, doi:10.3762/bjnano.13.32

• can greatly simplify the circuit volume of traditional PN junctions and increase the circuit integration. NWs-NEM switches Single-crystal nanowires are excellent candidates for NEM switches due to their uniform chemical and physical structure, and good reproducibility of structure and composition

Micro- and nanotechnology in biomedical engineering for cartilage tissue regeneration in osteoarthritis

• Zahra Nabizadeh,
• Mahmoud Nasrollahzadeh,
• Hamed Daemi,
• Mohamadreza Baghaban Eslaminejad,
• Ali Akbar Shabani,
• Mehdi Dadashpour,
• Majid Mirmohammadkhani and
• Davood Nasrabadi

Beilstein J. Nanotechnol. 2022, 13, 363–389, doi:10.3762/bjnano.13.31

• cues, and surface stiffness in osteochondral tissue differentiation and engineering is discussed with examples from recent studies that highlight their importance in tissue engineering applications. 2 Articular cartilage biology The composition and complex structure of articular cartilage need to be

• hierarchical structure of articular cartilage from its surface to the subchondral bone shows a depth-dependent transition and anisotropic integrity composed of four distinct zones; namely, superficial, middle, deep, and calcified cartilage [11][12] (Figure 2). The arrangement, composition, and content of the

• delivery [50], in vitro diagnosis [51], in vivo imaging [52], and TE purposes. Various NPs can be prepared in the form of liposomes, nanocapsules, micelles, dendrimers, and nanospheres based on their composition and method of preparation. Basically, NPs are designed to function as carriers for bioactive

Selected properties of Al_xZn_yO thin films prepared by reactive pulsed magnetron sputtering using a two-element Zn/Al target

• Witold Posadowski,
• Artur Wiatrowski,
• Jarosław Domaradzki and
• Michał Mazur

Beilstein J. Nanotechnol. 2022, 13, 344–354, doi:10.3762/bjnano.13.29

• = 400 W, which corresponded to a power density on the target surface of approximately 5 W/cm2. The films were deposited on glass strip substrates, placed symmetrically over the target, making it possible to obtain films with different composition and thickness. The film sheet resistance was measured as

• a function of the distance from the target axis on both sides (front and back) of the substrate. The lowest measured resistivity was about 4 × 10−3 Ω·cm. Additionally, optical properties, surface topography, and elemental composition were determined in selected areas of the substrate. Keywords

• composition of the deposited films to be changed by changing the electrical parameters of the two power supplies. Usually, in the abovementioned sputtering processes, the reported power density at the target was of the order of a few watts per square centimeter. Additionally, the substrates were intentionally