Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

• Viet Van Pham,
• Hong-Huy Tran,
• Thao Kim Truong and
• Thi Minh Cao

Beilstein J. Nanotechnol. 2022, 13, 96–113, doi:10.3762/bjnano.13.7

• environmental treatment [71]. A similar model, a Z-scheme photocatalyst, was reported by Lu et al. who successfully fabricated a ternary nanohybrid consisting of mesoporous SnO2, nitrogen-doped carbon quantum dots (NCDs), and ZnSn(OH)6 using a simple in situ solvothermal method. This nanohybrid photocatalyst

Use of nanosystems to improve the anticancer effects of curcumin

• Andrea M. Araya-Sibaja,
• Norma J. Salazar-López,
• Krissia Wilhelm Romero,
• José R. Vega-Baudrit,
• J. Abraham Domínguez-Avila,
• Carlos A. Velázquez Contreras,
• Ramón E. Robles-Zepeda,
• Mirtha Navarro-Hoyos and
• Gustavo A. González-Aguilar

Beilstein J. Nanotechnol. 2021, 12, 1047–1062, doi:10.3762/bjnano.12.78

• superparamagnetic iron oxide nanoparticles functionalized with sodium dodecyl sulfate (SDS) and coated with chitosan (40–45 nm), were able to induce apoptosis (IC50 30 µg/mL) in HeLa (cervical cancer) cells by damaging the DNA and increasing caspase-3 [136]. Curcumin-loaded, pH-sensitive Janus magnetic mesoporous

Progress and innovation of nanostructured sulfur cathodes and metal-free anodes for room-temperature Na–S batteries

• Marina Tabuyo-Martínez,
• Bernd Wicklein and
• Pilar Aranda

Beilstein J. Nanotechnol. 2021, 12, 995–1020, doi:10.3762/bjnano.12.75

• polysulfides. Thus, the sulfur host has stronger affinity to polysulfides, which get highly immobilized in the cathode. Thus, Zheng et al. [44] reported on a cathode in which the shuttle effect is completely prevented. The sulfur host is based on copper nanoparticles deposited on high surface area mesoporous

Comprehensive review on ultrasound-responsive theranostic nanomaterials: mechanisms, structures and medical applications

• Sepand Tehrani Fateh,
• Lida Moradi,
• Elmira Kohan,
• Michael R. Hamblin and
• Amin Shiralizadeh Dezfuli

Beilstein J. Nanotechnol. 2021, 12, 808–862, doi:10.3762/bjnano.12.64

• (conventional and echogenic), niosomes, nanoemulsions, polymeric nanoparticles, chitosan nanocapsules, dendrimers, hydrogels, nanogels, gold nanoparticles, titania nanostructures, carbon nanostructures, mesoporous silica nanoparticles, fuel-free nano/micromotors. Keywords: smart nanomaterials; sonodynamic

• ]. Various nanostructures have been developed for free radical generation under US irradiation. A novel nanostructure was constructed based on a BNN-type NO-releasing molecule and superparamagnetic iron oxide nanoparticles (SPION)-encapsulated mesoporous silica NPs (MSN) which could generate NO free radicals

Boosting of photocatalytic hydrogen evolution via chlorine doping of polymeric carbon nitride

• Malgorzata Aleksandrzak,
• Michalina Kijaczko,
• Wojciech Kukulka,
• Daria Baranowska,
• Martyna Baca,
• Beata Zielinska and
• Ewa Mijowska

Beilstein J. Nanotechnol. 2021, 12, 473–484, doi:10.3762/bjnano.12.38

• samples, which is typical of mesoporous materials (Figure 6). The hysteresis loops, pore–size distribution curves, and average pore diameter for both samples are similar. The proportion of micropores is small and the samples contain mainly mesopores. The sample modified by chlorine presents a slightly

The impact of molecular tumor profiling on the design strategies for targeting myeloid leukemia and EGFR/CD44-positive solid tumors

• Nikola Geskovski,
• Nadica Matevska-Geshkovska,
• Simona Dimchevska Sazdovska,
• Marija Glavas Dodov,
• Kristina Mladenovska and
• Katerina Goracinova

Beilstein J. Nanotechnol. 2021, 12, 375–401, doi:10.3762/bjnano.12.31

• leukemia cell population, Mandal and co-workers developed mesoporous silica nanoparticles decorated with an anti-B220 antibody intended for B220+LSC targeting [53]. The daunorubicin-loaded targeted nanoparticles demonstrated selective efficacy against B220+/Mac1− cells, relative to B220− AML LSCs. In

• itself proved to be non-toxic to healthy BALB/c mice. The co-delivery strategy has the potential to overcome therapy-induced niche-mediated leukemia resistance in AML. Dong et al. developed a biomimetic NDDS composed of a mesoporous silica nanoparticulate core loaded with daunorubicin and coated with

Unravelling the interfacial interaction in mesoporous SiO₂@nickel phyllosilicate/TiO₂ core–shell nanostructures for photocatalytic activity

• Bridget K. Mutuma,
• Xiluva Mathebula,
• Isaac Nongwe,
• Bonakele P. Mtolo,
• Boitumelo J. Matsoso,
• Rudolph Erasmus,
• Zikhona Tetana and
• Neil J. Coville

Beilstein J. Nanotechnol. 2020, 11, 1834–1846, doi:10.3762/bjnano.11.165

• nanostructures are attractive candidates for photocatalysis owing to their tunable physicochemical properties, their interfacial contact effects, and their efficacy in charge-carrier separation. This study reports, for the first time, on the synthesis of mesoporous silica@nickel phyllosilicate/titania (mSiO2

• . Therefore, in this study we report on the growth of mesoporous SiO2@NiPS and titania-coated mSiO2@NiPS (mSiO2@NiPS/TiO2) core–shell nanostructures using a simple deposition-precipitation method. Transmission electron microscopy (TEM), N2 physisorption analysis, diffuse reflectance UV–visible spectroscopy

• photodegradation of methyl violet dye. For comparison, the photocatalytic properties of pristine TiO2 were also investigated. It is postulated that the controlled surface area of the mesoporous SiO2 as well as the formation of a core–shell network with a flake-like NiPS structure on the surface aided in creating a

Nanocasting synthesis of BiFeO₃ nanoparticles with enhanced visible-light photocatalytic activity

• Thomas Cadenbach,
• Maria J. Benitez,
• A. Lucia Morales,
• Cesar Costa Vera,
• Luis Lascano,
• Francisco Quiroz,
• Alexis Debut and
• Karla Vizuete

Beilstein J. Nanotechnol. 2020, 11, 1822–1833, doi:10.3762/bjnano.11.164

• Fuerzas Armadas ESPE, Av. Gral. Rumiñahui s/n, Sangolquí, PO Box 171-5-231B, Ecuador 10.3762/bjnano.11.164 Abstract In this work, monodisperse BiFeO3 nanoparticles with a particle diameter of 5.5 nm were synthesized by a nanocasting technique using mesoporous silica SBA-15 as a hard template and pre

• formation of pure-phase BiFeO3 materials [19][22][23][24][34][35]. A proposed solution to control particle growth and to guarantee the formation of pure phases is the use of a nanocasting technique [36][37][38]. Here, previously synthesized mesoporous matrices act as sacrificial rigid molds, also known as

• sieve. Mesoporous silica SBA-15 with a pore size diameter of approximately 8 nm was prepared according to the procedures describe elsewhere [38][42]. Please find the corresponding small-angle xrd pattern (Figure S3), BET analysis (Figure S4, Table S2) and a TEM image (Figure S5) of the synthesized SBA

PEG/PEI-functionalized single-walled carbon nanotubes as delivery carriers for doxorubicin: synthesis, characterization, and in vitro evaluation

• Shuoye Yang,
• Zhenwei Wang,
• Yahong Ping,
• Yuying Miao,
• Yongmei Xiao,
• Lingbo Qu,
• Lu Zhang,
• Yuansen Hu and
• Jinshui Wang

Beilstein J. Nanotechnol. 2020, 11, 1728–1741, doi:10.3762/bjnano.11.155

• modification with PEG or PEI [40]. It should be noted that LE and EE of CNT carriers in this study are higher than those of other nanocarriers such as mesoporous silica nanoparticles (MSNs) or liposomes [39]. In vitro drug release Due to the encapsulation in the nanocarriers after drug loading, a premature

Structure and electrochemical performance of electrospun-ordered porous carbon/graphene composite nanofibers

• Yi Wang,
• Yanhua Song,
• Chengwei Ye and
• Lan Xu

Beilstein J. Nanotechnol. 2020, 11, 1280–1290, doi:10.3762/bjnano.11.112

• adsorption and desorption nitrogen branches. In addition, the hysteresis loops in the P/P0 0.5–1.0 range demonstrated that the material had a significant mesoporous structure [38]. These porous structures are able to provide lower resistance channels and shorter transfer paths for ions in the electrolyte

• . This is due to the fact that large mesoporous holes are more suitable for rapid ion diffusion at a high-load current density. This way, the specific surface area generated by these pores is effectively utilized [39]. At relatively high pressure values (P/P0 > 0.5), there was an evident hysteresis loop

• due to capillary condensation in the mesopores, which also indicated a high mesoporous content [40]. At relatively low pressure levels (P/P0 < 0.1), the amount of nitrogen adsorbed on the sample was almost insignificant, which indicated the existence of negligible micropores. Moreover, the increased

Influence of the magnetic nanoparticle coating on the magnetic relaxation time

• Mihaela Osaci and
• Matteo Cacciola

Beilstein J. Nanotechnol. 2020, 11, 1207–1216, doi:10.3762/bjnano.11.105

• sol–gel process, yielding metal-oxide nanoparticles dispersed in a mesoporous matrix. [5]. Other methods used for synthesising these nanoparticles include modifications of the sol–gel method. These methods involve supercritical conditions, such as ethyl alcohol and alkaline co-precipitation, and an

Applications of superparamagnetic iron oxide nanoparticles in drug and therapeutic delivery, and biotechnological advancements

• Maria Suciu,
• Corina M. Ionescu,
• Alexandra Ciorita,
• Septimiu C. Tripon,
• Dragos Nica,
• Hani Al-Salami and
• Lucian Barbu-Tudoran

Beilstein J. Nanotechnol. 2020, 11, 1092–1109, doi:10.3762/bjnano.11.94

• in any of the organs studied, even though an equivalent of 15 µg/day was released from the mass of the iron patch. Feng et al. [168] produced a multifunctional nanoplatform consisting of superparamagnetic iron oxide nanospheres coated with ultrasmall up-conversion nanoparticles on mesoporous

Plant growth regulation by seed coating with films of alginate and auxin-intercalated layered double hydroxides

• Vander A. de Castro,
• Valber G. O. Duarte,
• Danúbia A. C. Nobre,
• Geraldo H. Silva,
• Vera R. L. Constantino,
• Frederico G. Pinto,
• Willian R. Macedo and
• Jairo Tronto

Beilstein J. Nanotechnol. 2020, 11, 1082–1091, doi:10.3762/bjnano.11.93

• with indefinitely coherent fragments [28][29]. The volume and average pore diameter values are characteristic of a mesoporous material. Scanning electron microscopy (SEM) images of NAA and ZnAl-NAA-LDH, presented in Figure 4, show the presence of particles with a smooth surface, probably resulting from

• for the material (19.5 Å) is characteristic of the intercalation of NAA between LDH layers. The auxin intercalated into ZnAl-NAA-LDH was thermally decomposed at temperatures above 270 °C. The hybrid material showed a low specific surface area (29.7 m2·g−1) and a mesoporous volume (0.17 cm3·g−1). The

A novel dry-blending method to reduce the coefficient of thermal expansion of polymer templates for OTFT electrodes

• Xiangdong Ye,
• Bo Tian,
• Yuxuan Guo,
• Fan Fan and
• Anjiang Cai

Beilstein J. Nanotechnol. 2020, 11, 671–677, doi:10.3762/bjnano.11.53

• the influence of fullerene (C60) on the CTE of Araldite LY 5052/Aradur HY 5052 cross-linked epoxy resin by molecular dynamics simulations. The CTE was minimized by adding a maximum of 15.9 wt % fullerene to the LY/HY/C60 epoxy system. Liu et al. [14] selected MCM-41 mesoporous silica nanoparticles

Adsorptive removal of bulky dye molecules from water with mesoporous polyaniline-derived carbon

• Hyung Jun An,
• Jong Min Park,
• Nazmul Abedin Khan and
• Sung Hwa Jhung

Beilstein J. Nanotechnol. 2020, 11, 597–605, doi:10.3762/bjnano.11.47

• under different temperatures and applied for the purification of water contaminated with dye molecules of different sizes and charge by adsorption. With increasing pyrolysis temperature, it was found that the hydrophobicity, pore size and mesopore volume increased. A mesoporous PDC sample obtained via

• because of functional carbon materials (graphene [16] or porous carbon [17]), mesoporous materials [18] and MOFs [19][20][21][22]. For example, MOFs [23][24][25], carbonaceous materials (such as carbon nanotubes, graphene, biochar and activated carbon) [26] and clay [27] have been applied in adsorptive

Synthesis and enhanced photocatalytic performance of 0D/2D CuO/tourmaline composite photocatalysts

• Changqiang Yu,
• Min Wen,
• Zhen Tong,
• Shuhua Li,
• Yanhong Yin,
• Xianbin Liu,
• Yesheng Li,
• Tongxiang Liang,
• Ziping Wu and
• Dionysios D. Dionysiou

Beilstein J. Nanotechnol. 2020, 11, 407–416, doi:10.3762/bjnano.11.31

• photocatalysts was analyzed by their nitrogen adsorption–desorption isotherms. As shown in Figure 4a, CuO, tourmaline, and CuO/tourmaline composite exhibited type-IV adsorption isotherms, which are characteristic of mesoporous materials. As shown in Table 1, the Brunauer–Emmett–Teller (BET) specific surface area

Interactions at the cell membrane and pathways of internalization of nano-sized materials for nanomedicine

• Valentina Francia,
• Daphne Montizaan and
• Anna Salvati

Beilstein J. Nanotechnol. 2020, 11, 338–353, doi:10.3762/bjnano.11.25

• required to wrap a lipid membrane around a nanoparticle with high aspect ratio [148]. However, also in relation to this aspect, conflicting results were found in which cross-linked poly(ethylene glycol) hydrogels or mesoporous silica particles with higher aspect ratio were internalized quicker and more

High-performance asymmetric supercapacitor made of NiMoO₄ nanorods@Co₃O₄ on a cellulose-based carbon aerogel

• Meixia Wang,
• Jing Zhang,
• Xibin Yi,
• Benxue Liu,
• Xinfu Zhao and
• Xiaochan Liu

Beilstein J. Nanotechnol. 2020, 11, 240–251, doi:10.3762/bjnano.11.18

• considered an ideal supporting material to hybridize with electroactive materials because of its low cost, easy fabrication, large surface area, interconnected porosity and high electrical conductivity [30][31]. Due to its micro/mesoporous 3D morphology with large open pores, it offers more space to grow

Synthesis of amorphous and graphitized porous nitrogen-doped carbon spheres as oxygen reduction reaction catalysts

• Maximilian Wassner,
• Markus Eckardt,
• Andreas Reyer,
• Thomas Diemant,
• Michael S. Elsaesser,
• R. Jürgen Behm and
• Nicola Hüsing

Beilstein J. Nanotechnol. 2020, 11, 1–15, doi:10.3762/bjnano.11.1

• for g-NCS-850 and g-NCS-1000. Amorphous carbon spheres show a smooth surface and distinct microporosity; upon graphitization the surface becomes partially perforated or eroded creating a mesoporous system. For both sample series, NCS and g-NCS, the C content increases while the amount of O and H

• materials we found a clear ORR activity only after nitriding at 1000 °C. Only the sample TaON@NCS-1000 exhibited a mesoporous shell, thus improving access to the N-doped carbon core. The resulting TaON@NCS-1000 catalyst features a rather similar onset (0.7 V) as the NCS-1000 sample, and similar j–E

• cases direct comparison of the ORR performance after similar nitriding temperatures is even less possible. Nevertheless, for nitriding temperatures above and below 1000 °C, the TaON layer seems to block the ORR activity of the nitrided carbon cores very likely due to the lack of the permeable mesoporous

Advanced hybrid nanomaterials

• Andreas Taubert,
• Fabrice Leroux,
• Pierre Rabu and
• Verónica de Zea Bermudez

Beilstein J. Nanotechnol. 2019, 10, 2563–2567, doi:10.3762/bjnano.10.247

• the polyol process” [19], the synthetic process was found to be of prime importance to shape the nanoparticles and to optimize their surface/volume ratio in relation to the magnetic behavior. A one-step non-hydrolytic sol–gel synthesis of mesoporous TiO2 phosphonate hybrid materials was applied to

• (ethylene oxide)-b-poly(acrylic acid) (PEO-b-PAA) and an oligo-chitosan-type polyamine was used as a structure-directing agent to prepare ordered mesoporous silica materials in the work “pH-mediated control over the mesostructure of ordered mesoporous materials templated by polyion complex micelles” [22

• speciation can be targeted. For example, in the work “New micro/mesoporous nanocomposite material from low-cost sources for the efficient removal of aromatic and pathogenic pollutants from water”, a hybrid kaolinite nanocomposite was assembled via Zn cations upon calcination, resulting in a low-cost porous

Air oxidation of sulfur mustard gas simulants using a pyrene-based metal–organic framework photocatalyst

• Ghada Ayoub,
• Mihails Arhangelskis,
• Xuan Zhang,
• Florencia Son,
• Timur Islamoglu,
• Tomislav Friščić and
• Omar K. Farha

Beilstein J. Nanotechnol. 2019, 10, 2422–2427, doi:10.3762/bjnano.10.232

• , 3.4 mg) of the MOF, no conversion of CEES was detected (Figure 2), confirming the role of NU-400 as a photocatalyst. The photocatalytic activity of NU-400 in air, without oxygen presaturation, is significantly higher compared to the previously explored mesoporous NU-1000 MOF, which is based on a

Coating of upconversion nanoparticles with silica nanoshells of 5–250 nm thickness

• Cynthia Kembuan,
• Maysoon Saleh,
• Bastian Rühle,
• Ute Resch-Genger and
• Christina Graf

Beilstein J. Nanotechnol. 2019, 10, 2410–2421, doi:10.3762/bjnano.10.231

• such as peptides, antibodies or nucleic acids for bioimaging applications or fluorescence assays. The growth of a mesoporous silica shell on a microporous silica shell can also be applied for the subsequent use of these nanomaterials for drug loading and delivery [69]. Experimental All syntheses were

Semitransparent Sb₂S₃ thin film solar cells by ultrasonic spray pyrolysis for use in solar windows

• Jako S. Eensalu,
• Atanas Katerski,
• Erki Kärber,
• Lothar Weinhardt,
• Monika Blum,
• Clemens Heske,
• Wanli Yang,
• Ilona Oja Acik and
• Malle Krunks

Beilstein J. Nanotechnol. 2019, 10, 2396–2409, doi:10.3762/bjnano.10.230

• pioneered by the teams of Nair, Nezu, and Hodes in the mid-2000s [19][23][24]. The record PCE of 7.5%, achieved with solar cells based on Sb2S3 grown by chemical bath deposition (CBD) into mesoporous TiO2, shows the excellent potential of Sb2S3 as a PV absorber, and the suitability of its fabrication by

Polyvinylpyrrolidone as additive for perovskite solar cells with water and isopropanol as solvents

• Chen Du,
• Shuo Wang,
• Xu Miao,
• Wenhai Sun,
• Yu Zhu,
• Chengyan Wang and
• Ruixin Ma

Beilstein J. Nanotechnol. 2019, 10, 2374–2382, doi:10.3762/bjnano.10.228

• remarkable light absorption capacity [5] and the tunable band gap [6] of inorganic–organic lead halide perovskite crystals make them suitable for the production of organic semiconductors [7], photodetectors [8], and photovoltaics [5]. In 2009, Kojima et al. achieved a breakthrough in using mesoporous TiO2 as

Design and facile synthesis of defect-rich C-MoS₂/rGO nanosheets for enhanced lithium–sulfur battery performance

• Chengxiang Tian,
• Juwei Wu,
• Zheng Ma,
• Bo Li,
• Pengcheng Li,
• Xiaotao Zu and
• Xia Xiang

Beilstein J. Nanotechnol. 2019, 10, 2251–2260, doi:10.3762/bjnano.10.217

• range of 0.45–1.0 P/P0 suggests the presence of a mesoporous structure, as displayed in Figure 5a. The specific surface area was calculated to be 131.72, 300.64, 539.16 m2·g−1 by using the Brunauer–Emmett–Teller (BET) method. The pore size distribution obtained from the Barrett–Joyner–Halenda (BJH

• , demonstrating the mesoporous structure C-MoS2/rGO-6. The specific surface area (130.57 m2·g−1) of C-MoS2/rGO-6-S composite is significantly smaller than that of C-MoS2/rGO-6 as shown in Figure S3a (Supporting Information File 1). Additionally, the broad pore size distribution, ranging from 2 to 10 nm

• , diminished obviously in the C-MoS2/rGO-6-S composite (Figure S3b, Supporting Information File 1) compared to the C-MoS2/rGO-6 composite, which indicates that sulfur can be successfully dispersed into the mesoporous of the C-MoS2/rGO-6 composite. Among all samples, the C-MoS2/rGO-6 composite has the largest