Self-assembly of C₆₀ on a ZnTPP/Fe(001)–p(1 × 1)O substrate: observation of a quasi-freestanding C₆₀ monolayer

• Guglielmo Albani,
• Michele Capra,
• Alessandro Lodesani,
• Alberto Calloni,
• Gianlorenzo Bussetti,
• Marco Finazzi,
• Franco Ciccacci,
• Alberto Brambilla,
• Lamberto Duò and
• Andrea Picone

Beilstein J. Nanotechnol. 2022, 13, 857–864, doi:10.3762/bjnano.13.76

• Fullerene (C60) has been deposited in ultrahigh vacuum on top of a zinc tetraphenylporphyrin (ZnTPP) monolayer self-assembled on a Fe(001)–p(1 × 1)O substrate. The nanoscale morphology and the electronic properties of the C60/ZnTPP/Fe(001)–p(1 × 1)O heterostructure have been investigated by scanning

• fullerene films stabilized directly on metal surfaces. Our results unveil a model system that could be useful in applications in which a quasi-freestanding monolayer of C60 interfaced with a metallic electrode is required. Keywords: fullerene; scanning tunneling microscopy; ultraviolet photoemission

• displayed in Figure 1b, where individual ZnTPP molecules are resolved. Figure 2 focuses on the surface morphology for a sub-monolayer coverage of C60 on the ZnTPP/Fe(001)–p(1 × 1)O substrate. C60 forms a compact film, composed of hexagonal domains extending for hundreds of nanometers. By considering that

Optimizing PMMA solutions to suppress contamination in the transfer of CVD graphene for batch production

• Chun-Da Liao,
• Andrea Capasso,
• Tiago Queirós,
• Telma Domingues,
• Fatima Cerqueira,
• Nicoleta Nicoara,
• Jérôme Borme,
• Paulo Freitas and
• Pedro Alpuim

Beilstein J. Nanotechnol. 2022, 13, 796–806, doi:10.3762/bjnano.13.70

• (ca. 1585 cm−1) and 2D (ca. 2700 cm−1) bands are typical of monolayer graphene [23][24][25][26]. The defect density appears minimal considering the negligible D band intensity at ca. 1350 cm−1 (Figure 2c) [27]. The Raman mapping in Figure 2d–i examines the whole crystal area [28]. The map and the

• ± 3.0 cm−1 (Figure 2f,i), implying high-quality monolayer graphene. Together, the data further support uniformity and crystallinity of the sample. The G phonon band arises from double degeneracy of iTO and iLO phonon modes (E2g symmetry) at the Brillouin zone center, which is an in-plane vibration of

• B2 mixture yields more consistent electric properties of the graphene channel, thanks to a homogenous and reproducible process. Such characteristics ultimately translate into a consistent sensor performance, which is pivotal for industrial fabrication. Conclusion Monolayer graphene films and single

A nonenzymatic reduced graphene oxide-based nanosensor for parathion

• Sarani Sen,
• Anurag Roy,
• Ambarish Sanyal and
• Parukuttyamma Sujatha Devi

Beilstein J. Nanotechnol. 2022, 13, 730–744, doi:10.3762/bjnano.13.65

• detection limit and long-term stability at room temperature. Graphene oxide (GO), consisting of a monolayer of sp2-hybridized carbon atom network, has already been used in electrocatalysis, nanoelectronics, bionanosensors, and sustainable energy storage systems due to its larger active surface area

Tunable high-quality-factor absorption in a graphene monolayer based on quasi-bound states in the continuum

• Jun Wu,
• Yasong Sun,
• Feng Wu,
• Biyuan Wu and
• Xiaohu Wu

Beilstein J. Nanotechnol. 2022, 13, 675–681, doi:10.3762/bjnano.13.59

• /bjnano.13.59 Abstract A tunable graphene absorber, composed of a graphene monolayer and a substrate spaced by a subwavelength dielectric grating, is proposed and investigated. Strong light absorption in the graphene monolayer is achieved due to the formation of embedded optical quasi-bound states in the

• makes the fabrication quite difficult. In this paper, motivated by the investigation in [28], a tunable graphene absorber, which consists of a graphene monolayer on a dielectric grating backed with a substrate, is designed and investigated. The paper is arranged as follows: First, we present the

• . A graphene monolayer is placed on a one-dimensional dielectric grating, under which a dielectric substrate is used to support the device. The dielectric grating is defined by the period d, the width w, and the thickness h. The refractive indices of grating and substrate are nh and ns, respectively

Reliable fabrication of transparent conducting films by cascade centrifugation and Langmuir–Blodgett deposition of electrochemically exfoliated graphene

• Teodora Vićentić,
• Stevan Andrić,
• Vladimir Rajić and
• Marko Spasenović

Beilstein J. Nanotechnol. 2022, 13, 666–674, doi:10.3762/bjnano.13.58

• (DMEU), and ortho-dichlorobenzene (o-DCB) [12][17][18]. Exfoliation in NMP has led to minimally oxidized graphene sheets with approximately 28% monolayer flakes, and more than 75% of sheets with a thickness of less than six layers [12]. An alternative to LPE that has subsequently been developed is

Revealing local structural properties of an atomically thin MoSe₂ surface using optical microscopy

• Lin Pan,
• Peng Miao,
• Anke Horneber,
• Alfred J. Meixner,
• Pierre-Michel Adam and
• Dai Zhang

Beilstein J. Nanotechnol. 2022, 13, 572–581, doi:10.3762/bjnano.13.49

• addition, point defect-induced trions in monolayer WS2 on a nonconducting substrate can be visualized via photoluminescence in order to precisely explore the exciton binding energy [15]. The optical properties of edges and grain boundaries in 2D-TMDC materials have also been characterized by

• photoluminescence spectroscopy. Owing to the larger population of charge carriers, the photoluminescence from these structural defects of monolayer WS2 originates from the biexcitons under high-power excitation [16]. Interestingly, tilt boundaries in monolayer MoS2 induce strong photoluminescence enhancement and

• slightly decrease the in-plane electrical conductivity, whereas mirror twin boundaries lead to photoluminescence quenching and increase the conductivity [17]. Tip-enhanced Raman spectroscopy has been successfully used to visualize the point defect-related Raman vibrational modes in monolayer WS2 and edge

Effects of substrate stiffness on the viscoelasticity and migration of prostate cancer cells examined by atomic force microscopy

• Xiaoqiong Tang,
• Yan Zhang,
• Jiangbing Mao,
• Yuhua Wang,
• Zhenghong Zhang,
• Zhengchao Wang and
• Hongqin Yang

Beilstein J. Nanotechnol. 2022, 13, 560–569, doi:10.3762/bjnano.13.47

• cell migration, cells were cultured on PAA gels with different stiffness for 48 h, removed by trypsinization, and seeded at a density of 2 × 106 cells/mL in six-well plates to a confluent monolayer. A 10 µL pipet tip was used to scrape the cell monolayer in a straight line to create an empty gap. The

Ethosomal (−)-epigallocatechin-3-gallate as a novel approach to enhance antioxidant, anti-collagenase and anti-elastase effects

• Çiğdem Yücel,
• Gökçe Şeker Karatoprak,
• Sena Yalçıntaş and
• Tuğba Eren Böncü

Beilstein J. Nanotechnol. 2022, 13, 491–502, doi:10.3762/bjnano.13.41

• performed and the amounts of EGCG at the end of 24 hours were found to be 39.1%, 40.3%, and 39.8%, respectively. The lower cell permeation percentages of EGCG compared to that of the in vitro release study can be explained by the limiting aspect of the cell monolayer. ETHs are relatively new vesicular

Zinc oxide nanostructures for fluorescence and Raman signal enhancement: a review

• Ioana Marica,
• Fran Nekvapil,
• Maria Ștefan,
• Cosmin Farcău and
• Alexandra Falamaș

Beilstein J. Nanotechnol. 2022, 13, 472–490, doi:10.3762/bjnano.13.40

• on the tips of the nanorods by photodeposition or galvanic reduction [47][48]. Another facile method included layer-by-layer self-assembly deposition of chemically synthesized Au NPs, ZnO, and analyte molecules and resulted in dispersedly distributed ZnO particles onto a Au NP monolayer surface [49

Investigation of electron-induced cross-linking of self-assembled monolayers by scanning tunneling microscopy

• Patrick Stohmann,
• Sascha Koch,
• Yang Yang,
• Christopher David Kaiser,
• Julian Ehrens,
• Jürgen Schnack,
• Niklas Biere,
• Dario Anselmetti,
• Armin Gölzhäuser and
• Xianghui Zhang

Beilstein J. Nanotechnol. 2022, 13, 462–471, doi:10.3762/bjnano.13.39

• simulations, we propose that these voids may correspond to free volumes inside a cross-linked monolayer. Keywords: carbon nanomembranes; electron-induced cross-linking; scanning tunneling microscopy; self-assembled monolayers; subnanometer pores; Introduction Electron-induced chemistry plays an essential

• incommensurability between the monolayer and the Au surface. The stripe direction (line C) and the pair stacking direction (line D) are two different symmetry directions. The height profiles of lines A–D in Figure 2b were shown in Supporting Information File 1, Figure S1. The unit cell is described in matrix

• the pristine monolayer. Features similar to dark spots with a diameter of ≈10 Å were observed by Kondoh et al. on the methylthiolate/Au(111) surface after electron irradiation at 4 keV and assigned as sulfur species after cleavage of S–C bonds at the interface [69]. In our case, a higher magnification

Electrostatic pull-in application in flexible devices: A review

• Teng Cai,
• Yuming Fang,
• Yingli Fang,
• Ruozhou Li,
• Ying Yu and
• Mingyang Huang

Beilstein J. Nanotechnol. 2022, 13, 390–403, doi:10.3762/bjnano.13.32

• structure. The bridge monolayer graphene electrode is 20 µm long and 3 µm wide, the electrode gap is 500 nm, and the pull-in voltage is less than 5 V. As the electrode material was polycrystalline graphene, fracture of the GR electrode was observed after 4–5 life cycles, resulting in device failure. In 2018

Micro- and nanotechnology in biomedical engineering for cartilage tissue regeneration in osteoarthritis

• Zahra Nabizadeh,
• Mahmoud Nasrollahzadeh,
• Hamed Daemi,
• Mohamadreza Baghaban Eslaminejad,
• Ali Akbar Shabani,
• Mehdi Dadashpour,
• Majid Mirmohammadkhani and
• Davood Nasrabadi

Beilstein J. Nanotechnol. 2022, 13, 363–389, doi:10.3762/bjnano.13.31

Systematic studies into uniform synthetic protein nanoparticles

• Nahal Habibi,
• Ava Mauser,
• Jeffery E. Raymond and
• Joerg Lahann

Beilstein J. Nanotechnol. 2022, 13, 274–283, doi:10.3762/bjnano.13.22

• were sputter coated with gold for 40 s using an SPI-Module Carbon/Sputter Coater, which is optimized for monolayer deposition. Typical fields of view (FOV) were 5 μm and pixel sizes were in the range of 2 nm. Collected images were semi-randomized; a random FOV was selected approximately near the center

Impact of device design on the electronic and optoelectronic properties of integrated Ru-terpyridine complexes

• Max Mennicken,
• Sophia Katharina Peter,
• Corinna Kaulen,
• Ulrich Simon and
• Silvia Karthäuser

Beilstein J. Nanotechnol. 2022, 13, 219–229, doi:10.3762/bjnano.13.16

• ). This value is in line with data reported previously by us and described in literature for the switching ratio of Ru(TP)2-based monolayer devices [11][13][15]. Possible origins of this conductance switching in the Ru(MPTP)2–AuNP devices should be discussed. We can completely rule out a bolometric

Thermal oxidation process on Si(113)-(3 × 2) investigated using high-temperature scanning tunneling microscopy

• Hiroya Tanaka,
• Shinya Ohno,
• Kazushi Miki and
• Masatoshi Tanaka

Beilstein J. Nanotechnol. 2022, 13, 172–181, doi:10.3762/bjnano.13.12

• Institute for Materials Science, 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan 10.3762/bjnano.13.12 Abstract Thermal oxidation of Si(113) in a monolayer regime was investigated using high-temperature scanning tunneling microscopy (STM). Dynamic processes during thermal oxidation were examined in three

• -flow etching of the monolayer depth occurs just beside the remaining island, as shown by the solid arrow. The island remains at the step edge, as shown in the circle (d). A magnified image of the island in (d) is shown in Figure 4a. The line profile along the cross section A–B is shown in Figure 4b

Theoretical understanding of electronic and mechanical properties of 1T′ transition metal dichalcogenide crystals

• Seyedeh Alieh Kazemi,
• Sadegh Imani Yengejeh,
• Vei Wang,
• William Wen and
• Yun Wang

Beilstein J. Nanotechnol. 2022, 13, 160–171, doi:10.3762/bjnano.13.11

• . Eint was calculated using the following equation: where Ebulk and Emono are the energies of the bulk and monolayer of TMDs, respectively. N is the number of the layers in each unit cell. To understand the bonding strength between TM and X atoms as well as its impact on the cohesive energy of the TMDs

• TMX2 units in each unit cell. All the TM-X bond lengths are identical due to the high symmetry of 2H TMDs. The calculated lattice constants, monolayer thickness, and TM–X bond length of all systems in 1T′ and 2H polytypes are listed in Table 1. The optimized lattice constants and atomic coordinates are

• provided in Supporting Information File 1. The monolayer thickness is defined as the maximum height difference between the X anions in each layer. It reveals that diselenides have larger lattice constants, bond length, and average layer thickness. In comparison, the impact of the TM cation on the

A comprehensive review on electrospun nanohybrid membranes for wastewater treatment

• Senuri Kumarage,
• Imalka Munaweera and
• Nilwala Kottegoda

Beilstein J. Nanotechnol. 2022, 13, 137–159, doi:10.3762/bjnano.13.10

• membrane from PEO and CS with immobilized carbon quantum dots (CQDs) and Fe3O4 for the efficient removal of mercury ions from water [61]. The synergistic effect of nanofibrous polymer material and inorganic nanoparticles resulted in a maximum monolayer adsorption capacity of 148 mg/g. The Hg2+ sorption

A photonic crystal material for the online detection of nonpolar hydrocarbon vapors

• Evgenii S. Bolshakov,
• Aleksander V. Ivanov,
• Andrei A. Kozlov,
• Anton S. Aksenov,
• Elena V. Isanbaeva,
• Sergei E. Kushnir,
• Aleksei D. Yapryntsev,
• Aleksander E. Baranchikov and
• Yury A. Zolotov

Beilstein J. Nanotechnol. 2022, 13, 127–136, doi:10.3762/bjnano.13.9

• of a monolayer of spherical particles placed on a substrate. 3D structures, which appear in the form of a crystalline colloidal array (CCA), are called opal structures (spherical particles close-packed in an ordered structure). If the structure has been placed in a matrix and the particles have been

Effect of lubricants on the rotational transmission between solid-state gears

• Huang-Hsiang Lin,
• Jonathan Heinze,
• Alexander Croy,
• Rafael Gutiérrez and
• Gianaurelio Cuniberti

Beilstein J. Nanotechnol. 2022, 13, 54–62, doi:10.3762/bjnano.13.3

• (green) and benzene/phenantrene (red/yellow). This is because, unlike benzene and phenantrene, hexadecene has sp3 hybridization, which results in a larger monolayer thickness. These important findings imply that lubricants at the nanoscale can be used to synchronize both gears and make the collective

Sputtering onto liquids: a critical review

• Anastasiya Sergievskaya,
• Adrien Chauvin and
• Stephanos Konstantinidis

Beilstein J. Nanotechnol. 2022, 13, 10–53, doi:10.3762/bjnano.13.2

Irradiation-driven molecular dynamics simulation of the FEBID process for Pt(PF₃)₄

• Alexey Prosvetov,
• Alexey V. Verkhovtsev,
• Gennady Sushko and
• Andrey V. Solov’yov

Beilstein J. Nanotechnol. 2021, 12, 1151–1172, doi:10.3762/bjnano.12.86

• nanostructures. In contrast to the earlier studies [13][15] we consider the case of low precursor surface coverage (below one monolayer), in which surface diffusion plays an important role in the formation of deposits. In particular, we focus on the atomistic characterization of the initial stage of the FEBID

• chamber. Depending on the experimental conditions (temperature, precursor gas pressure, geometry, and position of the gas inlet), precursor molecules adsorb on the substrate surface and form a thin (from sub-monolayer to several monolayer thickness) film. An explicit evaluation of adsorption and

• moving in space. In this study a sub-monolayer of Pt(PF3)4 with the size of 20 nm × 20 nm is optimized, adsorbed on a SiO2-H substrate and thermalized at 300 K for 0.1 ns using the Langevin thermostat with a damping time of 0.2 ps. The constructed layer consists of approximately 370 molecules that

Molecular assemblies on surfaces: towards physical and electronic decoupling of organic molecules

• Sabine Maier and
• Meike Stöhr

Beilstein J. Nanotechnol. 2021, 12, 950–956, doi:10.3762/bjnano.12.71

• otherwise only achieved for multilayers on the bare Ni. On hBN/Cu(111), Zimmermann et al. [87] could visualize the molecular orbitals of pyrene derivatives by STM at the submolecular level, while Brülke et al. [88] measured the fluorescence of monolayer perylenetetracarboxylic dianhydride (PTCDA), which is

Effects of temperature and repeat layer spacing on mechanical properties of graphene/polycrystalline copper nanolaminated composites under shear loading

• Chia-Wei Huang,
• Man-Ping Chang and
• Te-Hua Fang

Beilstein J. Nanotechnol. 2021, 12, 863–877, doi:10.3762/bjnano.12.65

• [001] along the x-, y-, and z-directions, respectively. According to a previous report, the C–C bond length in the graphene monolayer was set to 0.143 nm [34], as shown in Figure 2. The simulations were carried out using the large-scale atomic/molecular mass parallel simulator (LAMMPS), with a time

Comprehensive review on ultrasound-responsive theranostic nanomaterials: mechanisms, structures and medical applications

• Sepand Tehrani Fateh,
• Lida Moradi,
• Elmira Kohan,
• Michael R. Hamblin and
• Amin Shiralizadeh Dezfuli

Beilstein J. Nanotechnol. 2021, 12, 808–862, doi:10.3762/bjnano.12.64

Silver nanoparticles induce the cardiomyogenic differentiation of bone marrow derived mesenchymal stem cells via telomere length extension

• Khosro Adibkia,
• Ali Ehsani,
• Asma Jodaei,
• Ezzatollah Fathi,
• Raheleh Farahzadi and
• Mohammad Barzegar-Jalali

Beilstein J. Nanotechnol. 2021, 12, 786–797, doi:10.3762/bjnano.12.62

• environment with 5% CO2 to grow the cells in a monolayer. The medium was refreshed every three days in each of the experiments. Treatment of BM-MSCs with Ag-NPs Polyvinylpyrrolidone-coated Ag-NPs were purchased from Iranian nanomaterials pioneers (Mashhad City, Khorasan, Iran). The hydrodynamic diameter of