SERS performance of GaN/Ag substrates fabricated by Ag coating of GaN platforms

• Magdalena A. Zając,
• Bogusław Budner,
• Malwina Liszewska,
• Bartosz Bartosewicz,
• Łukasz Gutowski,
• Jan L. Weyher and
• Bartłomiej J. Jankiewicz

Beilstein J. Nanotechnol. 2023, 14, 552–564, doi:10.3762/bjnano.14.46

• in the formation of nanocolumns on line defects (dislocations), as was demonstrated in [45]. The nanostructured GaN platforms were then coated with Ag using a Quorum Q150TS sputter coater (Quorum Technologies Ltd., Laughton, UK) with a cleaning oxidized target function engaged [32]. The thickness of

Combining physical vapor deposition structuration with dealloying for the creation of a highly efficient SERS platform

• Adrien Chauvin,
• Walter Puglisi,
• Damien Thiry,
• Cristina Satriano,
• Rony Snyders and
• Carla Bittencourt

Beilstein J. Nanotechnol. 2023, 14, 83–94, doi:10.3762/bjnano.14.10

• ). For the sample AlAg18 dealloyed in H3PO4 for 60 min, small ligaments (24 ± 4 nm) can be seen on the surface (Figure 5a). The initial structure made of dispersed nanocolumns is not visible in the cross-section image (Figure 5d). When increasing the initial concentration of silver to 30 atom %, the top

Zinc oxide nanostructures for fluorescence and Raman signal enhancement: a review

• Ioana Marica,
• Fran Nekvapil,
• Maria Ștefan,
• Cosmin Farcău and
• Alexandra Falamaș

Beilstein J. Nanotechnol. 2022, 13, 472–490, doi:10.3762/bjnano.13.40

• include hydrothermal method [42], controlled wet chemistry using spin coating, which can deposit, for example, uniform Ag NPs onto ZnO nanowhiskers and nanocolumns [43], photochemical deposition, which allows the formation of different Au shapes depending on the type of additive added into the

Spontaneous shape transition of Mn_xGe_1−x islands to long nanowires

• S. Javad Rezvani,
• Luc Favre,
• Gabriele Giuli,
• Yiming Wubulikasimu,
• Isabelle Berbezier,
• Augusto Marcelli,
• Luca Boarino and
• Nicola Pinto

Beilstein J. Nanotechnol. 2021, 12, 366–374, doi:10.3762/bjnano.12.30

• our experimental conditions (i.e., high-temperature annealing of Mn wetting layers). While several works have been published so far on the seeded VLS growth of Mn-rich Ge–Mn NWs [7][39][40] or on the eutectoid growth of Mn-rich MnxGe1−x nanocolumns with strongly inhomogeneous Mn distribution [25], to

Oxidation of Au/Ag films by oxygen plasma: phase separation and generation of nanoporosity

• Abdel-Aziz El Mel,
• Said A. Mansour,
• Mujaheed Pasha,
• Atef Zekri,
• Janarthanan Ponraj,
• Akshath Shetty and
• Yousef Haik

Beilstein J. Nanotechnol. 2020, 11, 1608–1614, doi:10.3762/bjnano.11.143

• confirmed that no gold migrated toward the film surface. According to the HAADF image in Figure 6, while the film maintained its columnar morphology, its nanocolumns became nanoporous, which is consistent with the cross-sectional SEM images of the same sample presented previously. The STEM-EDS elemental

Electrochemical nanostructuring of (111) oriented GaAs crystals: from porous structures to nanowires

• Elena I. Monaico,
• Eduard V. Monaico,
• Veaceslav V. Ursaki,
• Shashank Honnali,
• Vitalie Postolache,
• Karin Leistner,
• Kornelius Nielsch and
• Ion M. Tiginyanu

Beilstein J. Nanotechnol. 2020, 11, 966–975, doi:10.3762/bjnano.11.81

• -step anodization process and the preparation of porous structures consisting of crossing pores [1][23]. GaAs nanocolumns with a diameter of about 200 nm were obtained previously through anodization of GaAs(100) substrates in aqueous HCl solution [24], but the nanocolumns were penetrated by a large

Effect of Ag loading position on the photocatalytic performance of TiO₂ nanocolumn arrays

• Jinghan Xu,
• Yanqi Liu and
• Yan Zhao

Beilstein J. Nanotechnol. 2020, 11, 717–728, doi:10.3762/bjnano.11.59

• efficiency of methylene blue (MB) compared with Ag-coated TiO2 (ACT) nanocolumn arrays and pure TiO2 nanocolumns arrays. Both experimental and theoretical simulation results demonstrated that the enhanced photocatalytic performance of AFT nanocolumn arrays was attributed to the surface plasmon resonance (SPR

• theoretical optimal structure of the plasma metal–semiconductor heterojunction. Having this background in mind, we decided to prepare a TiO2 nanocolumn (TNC) structure by using AAO in combination with ALD, in which Ag particles could be selectively supported separately outside and inside the nanocolumns. Most

• of the 1D TiO2–Ag nanostructures prepared to date are Ag-nanoparticle-coated TiO2 (ACT), in which the catalytic efficiency of the catalyst is greatly decreased when the Ag loading is increased to a certain extent. Wang et al. [29] used the hydrothermal method to prepare an array of TiO2 nanocolumns

A scanning probe microscopy study of nanostructured TiO₂/poly(3-hexylthiophene) hybrid heterojunctions for photovoltaic applications

• Laurie Letertre,
• Roland Roche,
• Olivier Douhéret,
• Hailu G. Kassa,
• Denis Mariolle,
• Nicolas Chevalier,
• Łukasz Borowik,
• Philippe Dumas,
• Benjamin Grévin,
• Roberto Lazzaroni and
• Philippe Leclère

Beilstein J. Nanotechnol. 2018, 9, 2087–2096, doi:10.3762/bjnano.9.197

• can easily form nanostructures, such as nanoporous layers, nanowires or nanocolumns [5][11][12]. Because of its large band gap (3.2 eV [13]), light absorption is carried out by an organic or inorganic dye. The nanostructuration of the acceptor material is crucial for the cell performance [11], as it

• deposited over a grounded ITO electrode, where the nanocolumns of TiO2 are assembled in clumps with a width of several hundred nm. Figure 2b shows the corresponding KPFM Vcpd image. Figure 2c presents the three-dimensional display of Figure 2a, where the colour scale refers to the Vcpd signal of Figure 2b

• columns varies, and is therefore not impacted solely by the topographic variations. We note that the Iph contrast is qualitatively similar to that of the Vcpd observed in Figure 2, in which the top of the bare TiO2 nanocolumns displays more negative Vcpd values. Iph and Vcpd quantify two different

Dopant-stimulated growth of GaN nanotube-like nanostructures on Si(111) by molecular beam epitaxy

• Alexey D. Bolshakov,
• Alexey M. Mozharov,
• Georgiy A. Sapunov,
• Igor V. Shtrom,
• Nickolay V. Sibirev,
• Vladimir V. Fedorov,
• Evgeniy V. Ubyivovk,
• Maria Tchernycheva,
• George E. Cirlin and
• Ivan S. Mukhin

Beilstein J. Nanotechnol. 2018, 9, 146–154, doi:10.3762/bjnano.9.17

• -nanoelectronics [10]. The discovery of carbon NTs in 1991 unfolded new possibilities for the development of future generation nanoelectronic devices. Growing interest in the tubular structures motivated the synthesis of different semiconductor NTs, one of them being GaN NTs. Comparing to NWs and nanocolumns, NTs

Au nanostructure fabrication by pulsed laser deposition in open air: Influence of the deposition geometry

• Rumen G. Nikov,
• Anna Og. Dikovska,
• Nikolay N. Nedyalkov,
• Georgi V. Avdeev and
• Petar A. Atanasov

Beilstein J. Nanotechnol. 2017, 8, 2438–2445, doi:10.3762/bjnano.8.242

• ., Bl.11, 1113 Sofia, Bulgaria 10.3762/bjnano.8.242 Abstract We present a fast and flexible method for the fabrication of Au nanocolumns. Au nanostructures were produced by pulsed laser deposition in air at atmospheric pressure. No impurities or Au compounds were detected in the resulting samples. The

• nanoparticles and nanoaggregates produced in the ablated plasma at atmospheric pressure led to the formation of chain-like nanostructures on the substrate. The dependence of the surface morphology of the samples on the deposition geometry used in the experimental set up was studied. Nanocolumns of different

• and realization in ambient conditions presented in this work more ideal for industrial applications. Keywords: Au nanostructures; deposition geometry; nanocolumns; open-air PLD; physical properties; Introduction The growing interest in nanomaterials is related to their unique and fascinating

Nanotopographical control of surfaces using chemical vapor deposition processes

• Meike Koenig and
• Joerg Lahann

Beilstein J. Nanotechnol. 2017, 8, 1250–1256, doi:10.3762/bjnano.8.126

• ° to the substrate plane results in the formation of slanted nanocolumns via a self-shadowing mechanism with a diameter of around 150 nm [39][40][41]. The slanting angle can be controlled via the deposition angle. Compared to inorganic oblique angle deposition, more complex algorithms have to be

Study of the surface properties of ZnO nanocolumns used for thin-film solar cells

• Neda Neykova,
• Jiri Stuchlik,
• Karel Hruska,
• Ales Poruba,
• Zdenek Remes and
• Ognen Pop-Georgievski

Beilstein J. Nanotechnol. 2017, 8, 446–451, doi:10.3762/bjnano.8.48

• Densely packed ZnO nanocolumns (NCs), perpendicularly oriented to the fused-silica substrates were directly grown under hydrothermal conditions at 90 °C, with a growth rate of around 0.2 μm/h. The morphology of the nanostructures was visualized and analyzed by scanning electron microscopy (SEM). The

• development of thin film solar cells based on ZnO NCs. Keywords: 3-dimensional solar cells; hydrothermal growth; optical spectroscopy; photothermal deflection spectroscopy; plasma treatment; X-ray photoelectron spectroscopy; ZnO nanocolumns; Introduction The widely accepted design of thin-film silicon (TF

• developed solar cells based on a three dimensional (3-D) design, in which periodically ordered zinc oxide nanocolumns (ZnO NCs) are used as a front electrode, have been of great interest, because they would exceed in the ultimate light trapping and provide excellent charge separation [5][6][7]. Due to the