The role of gold atom concentration in the formation of Cu–Au nanoparticles from the gas phase

• Yuri Ya. Gafner,
• Svetlana L. Gafner,
• Darya A. Ryzkova and
• Andrey V. Nomoev

Beilstein J. Nanotechnol. 2021, 12, 72–81, doi:10.3762/bjnano.12.6

• 10.3762/bjnano.12.6 Abstract The synthesis of bimetallic nanoparticles need to be controlled in order to obtain particles of a desired size, spatial structure, and chemical composition. In the synthesis of the Cu–Au nanoparticles studied here, nanoparticles can be obtained through either chemical or

• physical methods, each of which has its own drawbacks. Although it is very difficult to achieve the required target chemical composition of nanoparticles during chemical synthesis, their size can be stabilized quite well. In turn, physical synthesis methods mainly allow to maintain the required chemical

• composition; however, the size of the resulting particles varies significantly. To solve this issue, we studied the formation of Cu–Au nanoparticles with different chemical compositions from a gaseous medium using computer molecular dynamics (MD) simulation. The aim was to determine the effect of the

Bulk chemical composition contrast from attractive forces in AFM force spectroscopy

• Dorothee Silbernagl,
• Media Ghasem Zadeh Khorasani,
• Natalia Cano Murillo,
• Anna Maria Elert and
• Heinz Sturm

Beilstein J. Nanotechnol. 2021, 12, 58–71, doi:10.3762/bjnano.12.5

• field is applied. Khorasani and coworkers identified nanoparticles (exposed and subsurface) in an epoxy/boehmite nanocomposite by measuring the surface potential by means of KPM [9]. A disadvantage of KPM is that, in addition to the apex of the tip, the sides of the tip are also interacting. This leads

• ) mixed and gradient behavior of boehmite/epoxy interphases can be quantified, and 3) structural changes of epoxy can be quantified by the parameter Fattr. Epoxy/polycarbonate/boehmite composite The third sample is comprised of three materials: epoxy, PC and boehmite nanoparticles (NPs). Boehmite NPs

• surface was modified with taurine (coverage of ≈16%) which was found to enable the subsequent electrospinning process. The nanoparticles were mixed in a solution of methylene chloride (CH2Cl2) and PC. The solution was electrospun to form fibers at 30 kV and at distance of 10 cm from the collector. The

Effect of different silica coatings on the toxicity of upconversion nanoparticles on RAW 264.7 macrophage cells

• Cynthia Kembuan,
• Helena Oliveira and
• Christina Graf

Beilstein J. Nanotechnol. 2021, 12, 35–48, doi:10.3762/bjnano.12.3

• of Applied Sciences, Fachbereich Chemie- und Biotechnologie, Stephanstr. 7, D-64295 Darmstadt, Germany 10.3762/bjnano.12.3 Abstract Upconversion nanoparticles (UCNPs), consisting of NaYF4 doped with 18% Yb and 2% Er, were coated with microporous silica shells with thickness values of 7 ± 2 and 21

• : cytotoxicity; ion release; RAW 264.7 macrophage cell line; silica coating; upconversion nanoparticles; Introduction Upconversion nanoparticles (UCNPs) convert excitation radiation with long wavelengths to a short-wavelength emission. Since biological molecules do not have an upconversion mechanism, imaging

• that even a thin silica coating shell of <2 nm or of 5 nm can already reduce the luminescence quenching of UCNPs in an aqueous dispersion [19]. Besides, several studies revealed that silica-coated UCNPs have a low toxicity in vitro and in vivo compared with other nanoparticles [7][11][39]. Amorphous

Bio-imaging with the helium-ion microscope: A review

• Matthias Schmidt,
• James M. Byrne and
• Ilari J. Maasilta

Beilstein J. Nanotechnol. 2021, 12, 1–23, doi:10.3762/bjnano.12.1

• HIM in the field of medicine came in 2011 when Bazou et al. used the HIM to study tumor cells [9][10] and Arey et al. studied the interaction of nanoparticles with alveolar epithelial cells [11]. In the following two years, reports on HIM imaging of the nanostructures on butterfly scales by Boden et

• published in 2018 by Sato et al., who used the ionoluminescense generated by the He ion beam to detect ZnO nanoparticles which were incubated with COS7 cells [25]. Today HIM-SIMS is possible via two different approaches. The first, a sector-field mass-spectrometer SIMS, was developed by Dowsett, Wirtz, et

• HIM-SIMS was published by Lovric et al., who investigated E.coli bacteria exposed to TiO2 nanoparticles using the sector-field SIMS spectrometer [36]. In this review article, we build upon previous articles by Kim [37] and Gölzhäuser and Hlawacek [38] to present an overview on past discoveries and

Free and partially encapsulated manganese ferrite nanoparticles in multiwall carbon nanotubes

• Saja Al-Khabouri,
• Salim Al-Harthi,
• Toru Maekawa,
• Mohamed E. Elzain,
• Ashraf Al-Hinai,
• Ahmed D. Al-Rawas,
• Abbsher M. Gismelseed,
• Ali A. Yousif and
• Myo Tay Zar Myint

Beilstein J. Nanotechnol. 2020, 11, 1891–1904, doi:10.3762/bjnano.11.170

• , Kujirai, Kawagoe, Saitama 350 8585, Japan Department of Chemistry, Sultan Qaboos University, Muscat PC 123, Sultanate of Oman 10.3762/bjnano.11.170 Abstract Free and partially encapsulated manganese ferrite (MnFe2O4) nanoparticles are synthesized and characterized regarding structure, surface, and

• electronic and magnetic properties. The preparation method of partially encapsulated manganese ferrite enables the formation of a hybrid nanoparticle/tube system, which exhibits properties of manganese ferrite nanoparticles inside and attached to the external surface of the tubes. The effect of having

• manganese ferrite nanoparticles inside the tubes is observed as a shift in the X-ray diffraction peaks and as an increase in stress, hyperfine field, and coercivity when compared to free manganese ferrite nanoparticles. On the other hand, a strong charge transfer from the multiwall carbon nanotubes is

Towards 3D self-assembled rolled multiwall carbon nanotube structures by spontaneous peel off

• Jonathan Quinson

Beilstein J. Nanotechnol. 2020, 11, 1865–1872, doi:10.3762/bjnano.11.168

• forest, structures compatible with relatively large nanoparticles (approx. 100 nm) are identified. These are attributed to Fe metal catalysts formed during the synthesis and from which MWCNTs grow, assuming a root-growth mechanism [16][26]. For N1/C2 structures, it is not straightforward to observe the

• same structures at the bottom of the CNT forest, although clear structures related to Fe nanoparticles are observed at the N1/C2 interface (see discussion below Figure 4). This confirms that creating a N1/C2 interface is challenging. It is established that the inner diameter of MWCNTs increases with

• smaller inner diameter [16]. Thus, the size of a catalyst to grow a N-MWCNT is larger than that to grow an undoped C-MWCNT. This size is determined by the experimental conditions, such as the presence or absence of N atoms. This is related to the fact that smaller nanoparticles are more difficult to be

Scanning transmission imaging in the helium ion microscope using a microchannel plate with a delay line detector

• Eduardo Serralta,
• Nico Klingner,
• Olivier De Castro,
• Michael Mousley,
• Santhana Eswara,
• Serge Duarte Pinto,
• Tom Wirtz and
• Gregor Hlawacek

Beilstein J. Nanotechnol. 2020, 11, 1854–1864, doi:10.3762/bjnano.11.167

• annular microchannel plate detector was used for investigating gold–silica core–shell nanoparticles in ADF mode [30]. These approaches require a physical aperture to restrict the acceptance angle when performed in BF, and a physical change of the distance between the sample and the annular detector to

Unravelling the interfacial interaction in mesoporous SiO₂@nickel phyllosilicate/TiO₂ core–shell nanostructures for photocatalytic activity

• Bridget K. Mutuma,
• Xiluva Mathebula,
• Isaac Nongwe,
• Bonakele P. Mtolo,
• Boitumelo J. Matsoso,
• Rudolph Erasmus,
• Zikhona Tetana and
• Neil J. Coville

Beilstein J. Nanotechnol. 2020, 11, 1834–1846, doi:10.3762/bjnano.11.165

• photocatalyst with a degradation efficacy of 93% after three cycles. The porous flake-like morphology of the nickel phyllosilicate acted as a suitable support for the TiO2 nanoparticles. Further, a coating of TiO2 on the mSiO2@NiPS surface greatly affected the surface features and optoelectronic properties of

• restrict the electron–hole recombination [29]. Thus, a system that seeks to combine a porous silica core as a good support for nickel-based nanomaterials with titania nanoparticles could provide a synergistic effect for good photocatalytic activity. Nickel phyllosilicate structures can be readily generated

• good support for the TiO2 nanoparticles. Further, a coating of TiO2 on the SiO2@NiPS surface greatly impacted the surface features and optoelectronic properties of the core–shell nanostructure and yielded superior photocatalytic properties. Results and Discussion Morphological features, textural, and

Nanocasting synthesis of BiFeO₃ nanoparticles with enhanced visible-light photocatalytic activity

• Thomas Cadenbach,
• Maria J. Benitez,
• A. Lucia Morales,
• Cesar Costa Vera,
• Luis Lascano,
• Francisco Quiroz,
• Alexis Debut and
• Karla Vizuete

Beilstein J. Nanotechnol. 2020, 11, 1822–1833, doi:10.3762/bjnano.11.164

• Fuerzas Armadas ESPE, Av. Gral. Rumiñahui s/n, Sangolquí, PO Box 171-5-231B, Ecuador 10.3762/bjnano.11.164 Abstract In this work, monodisperse BiFeO3 nanoparticles with a particle diameter of 5.5 nm were synthesized by a nanocasting technique using mesoporous silica SBA-15 as a hard template and pre

• wet impregnation process and a calcination procedure with intermediate plateaus, monodisperse 5.5 nm BiFeO3 nanoparticles were successfully obtained. Furthermore, the nanoparticles were applied in photodegradation reactions of rhodamine B in aqueous solution under visible-light irradiation. Notably

• , the cast BiFeO3 nanoparticles demonstrated very high efficiencies and stability under visible-light irradiation, much higher than those of BiFeO3 nanoparticles synthesized by other synthetic methods. The possible mechanism in the photodegradation process has been deeply discussed on the basis of

Self-standing heterostructured NiC_x-NiFe-NC/biochar as a highly efficient cathode for lithium–oxygen batteries

• Shengyu Jing,
• Xu Gong,
• Shan Ji,
• Linhui Jia,
• Bruno G. Pollet,
• Sheng Yan and
• Huagen Liang

Beilstein J. Nanotechnol. 2020, 11, 1809–1821, doi:10.3762/bjnano.11.163

• performance as a result from the synergistic effect between these components. The second reason is that grape-like nanoparticles of NiFeC supported on porous N-doped carbon derived from PP provided more exposed active sites for ORR. The third reason is that there were NiFe alloy and NiCx materials inside the

• NiFeC nanoparticles formed on the surface of N-doped carbon. These structures efficiently improved the electron and ion transfer between the cathode and electrolyte during charging and discharging processes. Finally, NiFeC nanoparticles supported on N-doped carbon significantly impeded particle

• to the synergistic effects between the NiFe alloy and metal carbides inside the nanoparticles derived from Prussian blue. This study indicates that carbides formed on porous N-doped carbon may lead to a promising strategy to achieve high capacity and cyclability of Li–O2 batteries. The strategy used

PEG/PEI-functionalized single-walled carbon nanotubes as delivery carriers for doxorubicin: synthesis, characterization, and in vitro evaluation

• Shuoye Yang,
• Zhenwei Wang,
• Yahong Ping,
• Yuying Miao,
• Yongmei Xiao,
• Lingbo Qu,
• Lu Zhang,
• Yuansen Hu and
• Jinshui Wang

Beilstein J. Nanotechnol. 2020, 11, 1728–1741, doi:10.3762/bjnano.11.155

• ]. However, to the best of our knowledge, studies characterizing CNTs according to the dispersibility produced by different oxidizing acids have been scarcely performed. The macrophages of the reticuloendothelial system (RES) cannot recognize nonopsonized nanoparticles circulating in the blood system

• modification with PEG or PEI [40]. It should be noted that LE and EE of CNT carriers in this study are higher than those of other nanocarriers such as mesoporous silica nanoparticles (MSNs) or liposomes [39]. In vitro drug release Due to the encapsulation in the nanocarriers after drug loading, a premature

Cardiomyocyte uptake mechanism of a hydroxyapatite nanoparticle mediated gene delivery system

• Hiroaki Komuro,
• Masahiro Yamazoe,
• Kosuke Nozaki,
• Akiko Nagai and
• Tetsuo Sasano

Beilstein J. Nanotechnol. 2020, 11, 1685–1692, doi:10.3762/bjnano.11.150

• sufficiently studied in cardiomyocytes. The aim of this study was to determine how hydroxyapatite (HAp) nanoparticles contribute to the delivery of plasmid DNA (pDNA) into cardiomyocytes. We fabricated HAp nanoparticles using the water-in-oil (W/O) emulsion method and used these nanoparticles as the delivery

• . Furthermore, this HL-1 cell uptake was generated in response to HAp stimulation. Thus, HAp is a positive regulator of macropinocytosis in HL-1 cells and a good system for gene delivery in cardiomyocytes. Keywords: cardiomyocyte; endocytosis; gene delivery system; hydroxyapatite nanoparticles

• ) is one of the most stable forms of CaP, and diverse methods for preparing HAp nanoparticles have been reported. Among these methods, the microemulsion method has the advantage of controlling the spherical-like morphology and the size of nanoparticles by using a surfactant solution [11][12]. Therefore

The influence of an interfacial hBN layer on the fluorescence of an organic molecule

• Christine Brülke,
• Oliver Bauer and
• Moritz M. Sokolowski

Beilstein J. Nanotechnol. 2020, 11, 1663–1684, doi:10.3762/bjnano.11.149

• spectrum). An enhancement of radiative interband transitions has been reported for Cu nanoparticles [40]. We thus speculate that surface defects (protrusions) play a role here. This is in agreement with our observation that the intensity of this “defect luminescence” in region I depends on the exact

Oxidation of Au/Ag films by oxygen plasma: phase separation and generation of nanoporosity

• Abdel-Aziz El Mel,
• Said A. Mansour,
• Mujaheed Pasha,
• Atef Zekri,
• Janarthanan Ponraj,
• Akshath Shetty and
• Yousef Haik

Beilstein J. Nanotechnol. 2020, 11, 1608–1614, doi:10.3762/bjnano.11.143

• a fundamental point of view, gold/silver is a peculiar model system to study corrosion processes since gold is a noble metal. Interestingly, by using different types of Au/Ag nanoparticles, Lewis et al. showed how one can control and engineer, at the nanometer scale, the final shape and structure of

High-responsivity hybrid α-Ag₂S/Si photodetector prepared by pulsed laser ablation in liquid

• Raid A. Ismail,
• Hanan A. Rawdhan and
• Duha S. Ahmed

Beilstein J. Nanotechnol. 2020, 11, 1596–1607, doi:10.3762/bjnano.11.142

• Raid A. Ismail Hanan A. Rawdhan Duha S. Ahmed Department of Applied Science, University of Technology, Baghdad, Iraq 10.3762/bjnano.11.142 Abstract We report the synthesis of α-Ag2S nanoparticles (NPs) by one-step laser ablation of a silver target in aqueous solution of thiourea (Tu, CH4N2S

• with a monoclinic structure and that crystallinity of the nanoparticles was improved after adding CTAB. Raman studies revealed the presence of peaks related to Ag–S bonds (Ag modes) and the longitudinal optical phonon 2LO mode. Scanning electron microscopy investigations confirmed the production of

• ][6]. Silver sulfide nanoparticles (NPs) are extensively used in many applications, such as photoconductors, solar cells, infrared (IR) photodetectors, biosensors, photocatalysts, and probes [7][8][9]. A number of techniques have been used to synthesize nanostructured Ag2S, including facile

Fabrication of nano/microstructures for SERS substrates using an electrochemical method

• Jingran Zhang,
• Tianqi Jia,
• Xiaoping Li,
• Junjie Yang,
• Zhengkai Li,
• Guangfeng Shi,
• Xinming Zhang and
• Zuobin Wang

Beilstein J. Nanotechnol. 2020, 11, 1568–1576, doi:10.3762/bjnano.11.139

• roughness and shows the potential for storing micro- or nanoparticles. During PEO treatment, the intrinsic passivation layer of the Mg alloy is disrupted in random positions through local melting during electrical breakdowns. After cooling by the electrolyte, a stable oxide layer containing arrayed pores is

• . [47] employed femtosecond laser irradiation to fabricate nanorod arrayed structures decorated with Au nanoparticles. The study showed that the Raman intensity tended to decrease as the Au film thickness increased. Based on the above results, we selected Au films of 10 nm thickness for further

Electrokinetic characterization of synthetic protein nanoparticles

• Daniel F. Quevedo,
• Cody J. Lentz,
• Adriana Coll de Peña,
• Yazmin Hernandez,
• Nahal Habibi,
• Rikako Miki,
• Joerg Lahann and
• Blanca H. Lapizco-Encinas

Beilstein J. Nanotechnol. 2020, 11, 1556–1567, doi:10.3762/bjnano.11.138

• treatment of a wide variety of diseases. However, the slow progress in the field has resulted in relatively few therapies being translated into the clinic. Anisotropic synthetic protein nanoparticles (ASPNPs) show potential as a next-generation drug-delivery technology, due to their biocompatibility

• rely on electrokinetic principles to manipulate micro- and nanoparticles. These miniaturized devices can selectively trap and enrich nanoparticles based on their material characteristics, and subsequently release them, which allows for particle sorting and processing. In this study, we use insulator

• ; bicompartmental particles; dielectrophoresis; electrokinetics; electrophoresis; electro-osmosis; microfluidics; protein nanoparticles; Introduction Over the past 30 years, nanoparticles have been developed for a wide variety of scientific applications, ranging from medical imaging to drug delivery and enzyme

Cu₂O nanoparticles for the degradation of methyl parathion

• Juan Rizo,
• David Díaz,
• Benito Reyes-Trejo and
• M. Josefina Arellano-Jiménez

Beilstein J. Nanotechnol. 2020, 11, 1546–1555, doi:10.3762/bjnano.11.137

• University of Texas at Dallas, Texas 75080, United States 10.3762/bjnano.11.137 Abstract Methyl parathion (MP) is one of the most neurotoxic pesticides. An inexpensive and reliable one-step degradation method of MP was achieved through an aqueous suspension of copper(I) oxide nanoparticles (NPs). Three

• . Keywords: copper(I) oxide (Cu2O); Cu2O nanoparticles; degradation; methyl parathion; surface basicity; Introduction Organophosphorus pesticides (OPPs) are one of many kinds of pesticides that have attracted some attention mainly due to their neurotoxic effect [1][2][3]. The primary mechanism of action of

• , abundant, moderately stable, and reliable source of material for the degradation of MP. It is well known that nanoparticles have the advantage of a relatively high surface area. We have used this advantage to increase the basicity of Cu2O in the form of surface hydroxy groups (OH). This also decreased the

Optically and electrically driven nanoantennas

• Monika Fleischer,
• Dai Zhang and
• Alfred J. Meixner

Beilstein J. Nanotechnol. 2020, 11, 1542–1545, doi:10.3762/bjnano.11.136

• ultrahigh sensitivity sensing the central feature for tightly confining and enhancing the optical near-field is a narrow gap between two metallic nanoparticles or tips. Creating such gaps to obtain a controlled distribution of hotspots, for example, on a chip, is no trivial task. This has been pursued using

• sizeable third-harmonic generation from the pillar. The fact that nonlinear effects can already be observed in the absorption and scattering of single gold nanoparticles at much lower laser intensities is demonstrated in [56]. Using the so-called x-scan technique, a nanoparticle is scanned through a

Design of V-shaped cantilevers for enhanced multifrequency AFM measurements

• Mehrnoosh Damircheli and
• Babak Eslami

Beilstein J. Nanotechnol. 2020, 11, 1525–1541, doi:10.3762/bjnano.11.135

• rectangular cantilevers. There are two major applications of AFM that currently use V-shaped cantilevers. First, in static-mode AFM, that is, contact-mode AFM, V-shaped cantilevers are used in the modification of surfaces and the movement of nanoparticles to manufacture nanostructures [14][15]. In order to

Antimicrobial metal-based nanoparticles: a review on their synthesis, types and antimicrobial action

• Matías Guerrero Correa,
• Fernanda B. Martínez,
• Cristian Patiño Vidal,
• Camilo Streitt,
• Juan Escrig and
• Carol Lopez de Dicastillo

Beilstein J. Nanotechnol. 2020, 11, 1450–1469, doi:10.3762/bjnano.11.129

• Nanotechnology (CEDENNA), 9170124 Santiago, Chile Department of Physics, University of Santiago de Chile (USACH), Av. Ecuador 3493, 9170124 Santiago, Chile 10.3762/bjnano.11.129 Abstract The investigation of novel nanoparticles with antimicrobial activity has grown in recent years due to the increased incidence

• activity can result in the development of novel antimicrobial substances. Specifically, metal-based nanoparticles have attracted much interest due to their broad effectiveness against pathogenic microorganisms due to their high surface area and high reactivity. The aim of this review was to explore the

• state-of-the-art in metal-based nanoparticles, focusing on their synthesis methods, types, and their antimicrobial action. Different techniques used to synthesize metal-based nanoparticles were discussed, including chemical and physical methods and “green synthesis” methods that are free of chemical

Wafer-level integration of self-aligned high aspect ratio silicon 3D structures using the MACE method with Au, Pd, Pt, Cu, and Ir

• Mathias Franz,
• Romy Junghans,
• Paul Schmitt,
• Adriana Szeghalmi and
• Stefan E. Schulz

Beilstein J. Nanotechnol. 2020, 11, 1439–1449, doi:10.3762/bjnano.11.128

• nanoparticles were used to locally etch the silicon substrate. This work demonstrates a bottom-up self-assembly approach for noble metal nanoparticle formation and the subsequent silicon wet etching. The macroscopic wafer patterning has been done by using a poly(methyl methacrylate) masking layer. Different

• metals (Au, Pt, Pd, Cu, and Ir) were investigated to derive a set of technologies as platform for specific applications. Especially, the shape of the 3D structures and the resulting reflectance have been investigated. The Si nanostructures fabricated using Au nanoparticles show a perfect light absorption

• dominant mechanism [13]. This work presents the integration of the MACE process at the wafer level using several metal nanoparticles as catalysts for the reduction process (Equation 1). The aim is to generate a high aspect ratio template of silicon. This template has to be fully integrable into a common

One-step synthesis of carbon-supported electrocatalysts

• Sebastian Tigges,
• Nicolas Wöhrl,
• Ivan Radev,
• Ulrich Hagemann,
• Markus Heidelmann,
• Thai Binh Nguyen,
• Stanislav Gorelkov,
• Stephan Schulz and
• Axel Lorke

Beilstein J. Nanotechnol. 2020, 11, 1419–1431, doi:10.3762/bjnano.11.126

• commercial production of fuel cell catalysts, especially the scarcity of noble metals and the insufficient electrochemical long-term stability. Even though the surface-to-volume ratio can be drastically increased by the use of nanoparticles instead of thin films, the amount of noble metal (usually platinum

• group metals) required for electrode materials produced by conventional synthesis approaches is still cost-inefficient for broader commercial application [4][5]. Furthermore, since surfactants (capping agents) are typically applied in the traditional wet chemical synthesis of metal nanoparticles in

• techniques [11] and laser ablation [12]) are surfactant-free and scalable. However, these approaches typically require multiple-step procedures in which the support and catalytic nanoparticles (NPs) are first produced individually and then combined in a third step (i.e., NP sedimentation in liquid phase [13

Transient coating of γ-Fe₂O₃ nanoparticles with glutamate for its delivery to and removal from brain nerve terminals

• Konstantin Paliienko,
• Artem Pastukhov,
• Michal Babič,
• Daniel Horák,
• Olga Vasylchenko and
• Tatiana Borisova

Beilstein J. Nanotechnol. 2020, 11, 1381–1393, doi:10.3762/bjnano.11.122

• trauma, and epilepsy. Also, glutamate is a potential tumor growth factor. Using radiolabeled ʟ-[14C]glutamate and magnetic fields, we developed an approach for monitoring the biomolecular coating (biocoating) with glutamate of the surface of maghemite (γ-Fe2O3) nanoparticles. The nanoparticles decreased

• the initial rate of ʟ-[14C]glutamate uptake, and increased the ambient level of ʟ-[14C]glutamate in isolated cortex nerve terminals (synaptosomes). The nanoparticles exhibit a high capability to adsorb glutamate/ʟ-[14C]glutamate in water. Some components of the incubation medium of nerve terminals

• , that is, 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) and NaH2PO4, decreased the ability of γ-Fe2O3 nanoparticles to form a glutamate biocoating by about 50% and 90%, respectively. Only 15% of the amount of glutamate biocoating obtained in water was obtained in blood plasma. Albumin did

Analysis of catalyst surface wetting: the early stage of epitaxial germanium nanowire growth

• Owen C. Ernst,
• Felix Lange,
• David Uebel,
• Thomas Teubner and
• Torsten Boeck

Beilstein J. Nanotechnol. 2020, 11, 1371–1380, doi:10.3762/bjnano.11.121

• dewetting process, since the name of the resulting structures are nanoparticles or clusters but rarely droplets. Nevertheless, the origin of these structures from fluid-like states offers the opportunity for novel bottom-up techniques to produce precursor materials for functional materials, such as