Atmospheric water harvesting using functionalized carbon nanocones

• Fernanda R. Leivas and
• Marcia C. Barbosa

Beilstein J. Nanotechnol. 2023, 14, 1–10, doi:10.3762/bjnano.14.1

• addition to the hydrophobicity described above. The phenomena of density increasing with temperature at constant pressure and diffusion coefficients increasing with density at constant temperature were observed in experiments and simulations in bulk water [22][23][24]. Water presents both super flow and

• super flow in nanostructures has been explored in processes of separating water from salt or from other contaminants. This high mobility of water under nanoconfinement requires huge pressure and, consequently, a lot of energy [27][28]. In order to help water entrance and decrease the amount of required

• pressure, nanotubes have been functionalized with hydrophilic groups [29][30]. The addition of hydrophilic regions in small diameter environments, however, decreases the velocity of water molecules [31]. The high flow of water in nanostructures is also useful for capturing water from the atmosphere

Electrical and optical enhancement of ITO/Mo bilayer thin films via laser annealing

• Abdelbaki Hacini,
• Ahmad Hadi Ali,
• Nurul Nadia Adnan and
• Nafarizal Nayan

Beilstein J. Nanotechnol. 2022, 13, 1589–1595, doi:10.3762/bjnano.13.133

• (Quorum Q300T D) at 10−4 mbar pressure. The magnetron sputter contains a double target with high purity (approx. 99.99%). The first target is for sputtering ITO (90 wt % In2O3 and 10 wt % SnO2), and the second target is for sputtering Mo. Before deposition, the Si and the glass samples were cut into

Induced electric conductivity in organic polymers

• Konstantin Y. Arutyunov,
• Anatoli S. Gurski,
• Vladimir V. Artemov,
• Alexander L. Vasiliev,
• Azat R. Yusupov,
• Danfis D. Karamov and
• Alexei N. Lachinov

Beilstein J. Nanotechnol. 2022, 13, 1551–1557, doi:10.3762/bjnano.13.128

• thermosensors were calibrated by the 4He vapor pressure and by the reference points of superconducting transitions in pure bulk superconductors (Al, In, Sn, Pb). The resulting absolute error in determining the temperature was ≈10 mK, while the relative error was less than 1 mK. Repeated measurements of Tc of

Frequency-dependent nanomechanical profiling for medical diagnosis

• Santiago D. Solares and
• Alexander X. Cartagena-Rivera

Beilstein J. Nanotechnol. 2022, 13, 1483–1489, doi:10.3762/bjnano.13.122

• property approximations, for example in the study of arterial degeneration [34][35]. Besides the above frequency-dependent representation, other important measurements can be recorded, such as general topography and morphology, cell or tissue adhesive properties, internal hydrostatic pressure, and surface

Structural studies and selected physical investigations of LiCoO₂ obtained by combustion synthesis

• Monika Michalska,
• Paweł Ławniczak,
• Tomasz Strachowski,
• Adam Ostrowski and
• Waldemar Bednarski

Beilstein J. Nanotechnol. 2022, 13, 1473–1482, doi:10.3762/bjnano.13.121

• impurities from the surface of the tested material. Adsorption measurements were performed with nitrogen at 77 K. For each sample, an analysis was performed at 15 measurement points in the range of 0.05–0.3 P/P0 (relative pressure). This is the range of the SSA study. Above this range, the trend line bends

• with Mn were studied using impedance spectroscopy. For conductivity measurements, pellets of ca. 1.5 mm thickness and 5.15 mm in diameter were prepared from the synthesized material. The powder was pressed at 20 MPa pressure for 1 min at room temperature. The round surfaces of the samples were covered

Facile preparation of Au- and BODIPY-grafted lipid nanoparticles for synergized photothermal therapy

• Yuran Wang,
• Xudong Li,
• Haijun Chen and
• Yu Gao

Beilstein J. Nanotechnol. 2022, 13, 1432–1444, doi:10.3762/bjnano.13.118

• etherate (BF3·OEt2) and 2,4-dimethylpyrrole were freshly purified by distillation under reduced pressure. Synthesis and characterization of BDP All chemical reagents were obtained from commercial suppliers and used without further purification. 1H nuclear magnetic resonance (NMR) and 13C NMR spectra were

• over anhydrous Na2SO4, filtered, and concentrated under reduced pressure to afford the crude product. The crude product was purified via silica gel column chromatography using DCM/PE = 1:1 as eluent to obtain a green solid. 1H NMR (500 MHz, CDCl3) δ 8.06 (d, J = 16.5 Hz, 2H), 7.54 (d, J = 8.7 Hz, 4H

Dry under water: air retaining properties of large-scale elastomer foils covered with mushroom-shaped surface microstructures

• Matthias Mail,
• Stefan Walheim,
• Thomas Schimmel,
• Wilhelm Barthlott,
• Stanislav N. Gorb and
• Lars Heepe

Beilstein J. Nanotechnol. 2022, 13, 1370–1379, doi:10.3762/bjnano.13.113

• air layer under water for more than two weeks. Further, the stability of the air layer under pressure was investigated and these results are compared with the predicted theoretical values for air retention of microstructured surfaces. Here, we could show that they fit to the theoretical predictions

• , i.e., for immersion depth below hmax the air layer is persistent and does not vanish, above it will disappear in time τ. All following calculations were performed for a temperature of 20 °C and an atmospheric pressure patm = 1 bar. The maximum persistence depth is given by whereas σ = 72.75 mN/m is

• immersion depth much deeper than hmax In order to simulate even greater immersion depth of the order of several meters the air layer kept by the microstructured elastomer foil was analyzed within a home-build pressure chamber. The setup is shown in Figure 4. The pressure chamber was connected to a

Straight roads into nowhere – obvious and not-so-obvious biological models for ferrophobic surfaces

• Wilfried Konrad,
• Christoph Neinhuis and
• Anita Roth-Nebelsick

Beilstein J. Nanotechnol. 2022, 13, 1345–1360, doi:10.3762/bjnano.13.111

• of the air/water interface are the peculiar combination of the superhydrophobic surface of the hairs with the hydrophilic tip of the “eggbeater” structure [5] and the circumstance that, upon perturbation, for example, upon pressure changes, they allow for an “air spring” effect within the trapped air

• soil or water bodies that contain a high concentration of organic liquids that are, for instance, the product of decay processes and may reduce considerably the surface tension of water. In addition, the plastron is able to withstand external pressure exceeding 0.4 MPa. The air, which is not able to

• escape from the pockets formed by the honeycombs, is compressed but expands again as soon as the pressure is released, reestablishing the plastron [21][22]. The straight pathway does not provide a solution Transfer problems with the biological models. As fascinating as the air-holding hair cover of

Recent trends in Bi-based nanomaterials: challenges, fabrication, enhancement techniques, and environmental applications

• Vishal Dutta,
• Ankush Chauhan,
• Ritesh Verma,
• C. Gopalkrishnan and
• Van-Huy Nguyen

Beilstein J. Nanotechnol. 2022, 13, 1316–1336, doi:10.3762/bjnano.13.109

Studies of probe tip materials by atomic force microscopy: a review

• Ke Xu and
• Yuzhe Liu

Beilstein J. Nanotechnol. 2022, 13, 1256–1267, doi:10.3762/bjnano.13.104

• ][24]. Jiménez-Sánchez et al. [25] studied the extraction of Ir clusters from graphene (by indentation) on the surface of Rh(111) to fabricate AFM sharp nano-tips, i.e., with weak van der Waals interactions. Experiments were performed under ultrahigh pressure and low temperature (5 K) conditions using

Design of surface nanostructures for chirality sensing based on quartz crystal microbalance

• Yinglin Ma,
• Xiangyun Xiao and
• Qingmin Ji

Beilstein J. Nanotechnol. 2022, 13, 1201–1219, doi:10.3762/bjnano.13.100

Application of nanoarchitectonics in moist-electric generation

• Jia-Cheng Feng and
• Hong Xia

Beilstein J. Nanotechnol. 2022, 13, 1185–1200, doi:10.3762/bjnano.13.99

• mechanisms of solids and liquids at the nanoscale to fundamentally investigate the possibility of increasing the output power of MEGs. MEGs have great potential for applications as power generators for wearable self-powered pressure sensors, respiratory monitors, motion detectors, power sources for small

• . Top: A pressure-driven flow carries the net ionic charge within the double layer, generating a streaming current. Bottom: A potential gradient generates both an electro-osmotic fluid flow (black arrows) and an additional electrophoretic ion velocity (colored arrows). Figure 1g was reprinted with

• John Wiley and Sons. Copyright © 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. This content is not subject to CC BY 4.0. (a) Vapor pressure gradient near the air interface. (b) TEM images of the purified nanowire network. Scale bars: 100 nm. (c) Diagram of the protein device structure. Figure 8a–c

Microneedle-based ocular drug delivery systems – recent advances and challenges

• Piotr Gadziński,
• Anna Froelich,
• Monika Wojtyłko,
• Antoni Białek,
• Julia Krysztofiak and
• Tomasz Osmałek

Beilstein J. Nanotechnol. 2022, 13, 1167–1184, doi:10.3762/bjnano.13.98

• photoresistant layer. The wafer is then etched. A distinction can be made between wet and dry etching. The wet etching process uses a potassium hydroxide solution, while dry etching includes the physical methods ion milling and sputtering and the chemical method high-pressure plasma [156]. Lithographic

• microneedles containing an empty canal inside are usually filled with active ingredient solution, either passively or with the use of pressure-driven methods [161]. In the systems using passive diffusion, the drug solution can be loaded to the canals inside the microneedles [141] or to an external compartment

• [166]. In pressure-driven systems, a reservoir with different pumping mechanisms is attached to the microneedle systems. Usually, manually operated syringes are reported [167][168], as well as micropumps [169] or actuator-equipped devices designed for self-injection [170]. In coated microneedles the

A cantilever-based, ultrahigh-vacuum, low-temperature scanning probe instrument for multidimensional scanning force microscopy

• Hao Liu,
• Zuned Ahmed,
• Sasa Vranjkovic,
• Manfred Parschau,
• Andrada-Oana Mandru and
• Hans J. Hug

Beilstein J. Nanotechnol. 2022, 13, 1120–1140, doi:10.3762/bjnano.13.95

• minimized and the design has to be kept as symmetrical as possible to reduce thermal drift; third, the design must allow for a precise adjustment of the pressure of the sliders towards the sapphire rails for the xy-directions. All these conditions can be fulfilled with a concentric design, where the shear

Green synthesis of zinc oxide nanoparticles toward highly efficient photocatalysis and antibacterial application

• Vo Thi Thu Nhu,
• Nguyen Duy Dat,
• Le-Minh Tam and
• Nguyen Hoang Phuong

Beilstein J. Nanotechnol. 2022, 13, 1108–1119, doi:10.3762/bjnano.13.94

• in the dark for 30 min to equilibrate the adsorption. Subsequently, the suspensions were illuminated by a 30 W LED or an 18 W high-pressure mercury lamp. The light source was fixed at a distance of 20 cm from the surface of the reactor. After fixed illumination times, 5 mL was withdrawn and

Recent advances in green carbon dots (2015–2022): synthesis, metal ion sensing, and biological applications

• Aisha Kanwal,
• Naheed Bibi,
• Sajjad Hyder,
• Arif Muhammad,
• Hao Ren,
• Jiangtao Liu and
• Zhongli Lei

Beilstein J. Nanotechnol. 2022, 13, 1068–1107, doi:10.3762/bjnano.13.93

Effects of focused electron beam irradiation parameters on direct nanostructure formation on Ag surfaces

• Jānis Sniķeris,
• Vjačeslavs Gerbreders,
• Andrejs Bulanovs and
• Ēriks Sļedevskis

Beilstein J. Nanotechnol. 2022, 13, 1004–1010, doi:10.3762/bjnano.13.87

• and prevent a buildup of carbon in the irradiated area. Baking can be used to desorb light molecules with a high vapour pressure at the baking temperature; however, it is a slow process. Plasma cleaning procedures can rapidly remove contamination; however, they can damage some sensitive samples [24

Influence of water contamination on the sputtering of silicon with low-energy argon ions investigated by molecular dynamics simulations

• Grégoire R. N. Defoort-Levkov,
• Alan Bahm and
• Patrick Philipp

Beilstein J. Nanotechnol. 2022, 13, 986–1003, doi:10.3762/bjnano.13.86

• ignored. Contaminants on the sample surface can also play a critical role during the milling process: water can be found on nearly every sample surface [21]. For example, in a vacuum chamber at a pressure of 10−8 mbar, there are still 106 to 109 molecules per cm3. This contaminant has a strong impact on

• determine, for a specific pressure, the temperature and atomic mass of a molecule and the number of collisions per second and per square centimetre: where Za is the number of collisions per second, P is the pressure in Torr, T is the temperature in Kelvin, and m is the atomic mass of the molecule of

Theoretical investigations of oxygen vacancy effects in nickel-doped zirconia from ab initio XANES spectroscopy at the oxygen K-edge

• Dick Hartmann Douma,
• Lodvert Tchibota Poaty,
• Alessio Lamperti,
• Stéphane Kenmoe,
• Abdulrafiu Tunde Raji,
• Alberto Debernardi and
• Bernard M’Passi-Mabiala

Beilstein J. Nanotechnol. 2022, 13, 975–985, doi:10.3762/bjnano.13.85

• , ambient thermodynamic conditions such as oxygen pressure and post-annealing atmosphere are directly connected to the formation and concentration of oxygen vacancies [28]. The presence of the O vacancy modifies the oxidation state of the substitutional transition metal atom and thus the magnetic properties

Interaction between honeybee mandibles and propolis

• Leonie Saccardi,
• Franz Brümmer,
• Jonas Schiebl,
• Oliver Schwarz,
• Alexander Kovalev and
• Stanislav Gorb

Beilstein J. Nanotechnol. 2022, 13, 958–974, doi:10.3762/bjnano.13.84

• plant are deprived of further reproduction, which exerts a significant evolutionary selection pressure. The honeybee (Apis mellifera) was chosen as a possible model because it collects and processes propolis, a sticky and ductile material, that is created by mixing plant resins, wax, and other

Design of a biomimetic, small-scale artificial leaf surface for the study of environmental interactions

• Miriam Anna Huth,
• Axel Huth,
• Lukas Schreiber and
• Kerstin Koch

Beilstein J. Nanotechnol. 2022, 13, 944–957, doi:10.3762/bjnano.13.83

• drop on a rough surface, liquid is pressed between the cavities by the Laplace pressure. If the liquid penetrates into the cavities so far that it touches the substrate, a transition of the wetting states takes place [75]. Whether a transition occurs or not is influenced by the shape and dimensions of

Solar-light-driven LaFe_xNi_1−xO₃ perovskite oxides for photocatalytic Fenton-like reaction to degrade organic pollutants

• Chao-Wei Huang,
• Shu-Yu Hsu,
• Jun-Han Lin,
• Yun Jhou,
• Wei-Yu Chen,
• Kun-Yi Andrew Lin,
• Yu-Tang Lin and
• Van-Huy Nguyen

Beilstein J. Nanotechnol. 2022, 13, 882–895, doi:10.3762/bjnano.13.79

• methods to treat wastewater to purify water quality, such as electrochemical oxidation [12], Fenton method [13], ozonation [14], and photocatalysis [15]. They can achieve a fast reaction rate and extremely high organic removal ratio under average temperature and pressure to remove or decompose organic

DNA aptamer selection and construction of an aptasensor based on graphene FETs for Zika virus NS1 protein detection

• Nathalie B. F. Almeida,
• Thiago A. S. L. Sousa,
• Viviane C. F. Santos,
• Camila M. S. Lacerda,
• Thais G. Silva,
• Rafaella F. Q. Grenfell,
• Flavio Plentz and
• Antero S. R. Andrade

Beilstein J. Nanotechnol. 2022, 13, 873–881, doi:10.3762/bjnano.13.78

• rinsed with 0.1 M HCl for 5 min, water (DNAse/RNAse free) for 1 min, then borate buffer for 5 min under 50 psi pressure before injection of the incubation mixture at 0.5 psi for 5 s. The mixture was separated under 26 kV (reverse polarity) in borate buffer at 25 °C and monitored through UV absorbance

Self-assembly of C₆₀ on a ZnTPP/Fe(001)–p(1 × 1)O substrate: observation of a quasi-freestanding C₆₀ monolayer

• Guglielmo Albani,
• Michele Capra,
• Alessandro Lodesani,
• Alberto Calloni,
• Gianlorenzo Bussetti,
• Marco Finazzi,
• Franco Ciccacci,
• Alberto Brambilla,
• Lamberto Duò and
• Andrea Picone

Beilstein J. Nanotechnol. 2022, 13, 857–864, doi:10.3762/bjnano.13.76

• in UHV on a MgO(001) single crystal [48]. The Fe(001)–p(1 × 1)O surface was prepared by using the following procedure: the clean Fe substrate was exposed to 30 Langmuir of molecular oxygen at a pressure of = 2 × 10−7 mbar and subsequently annealed at about 700 °C for 5 min. Porphyrins were

Micro-structures, nanomechanical properties and flight performance of three beetles with different folding ratios

• Jiyu Sun,
• Pengpeng Li,
• Yongwei Yan,
• Fa Song,
• Nuo Xu and
• Zhijun Zhang

Beilstein J. Nanotechnol. 2022, 13, 845–856, doi:10.3762/bjnano.13.75

• frequency was found to affect inertial acceleration and aerodynamic pressure, thus affecting inertial force and aerodynamic force; with the increase of flapping frequency, their increment was relatively consistent [51]. For a four-wings FWMAV, the lift was increasing linearly with the flapping frequency [52