Properties of cationic monosubstituted tetraalkylammonium cyclodextrin derivatives – their stability, complexation ability in solution or when deposited on solid anionic surface

• Martin Popr,
• Sergey K. Filippov,
• Nikolai Matushkin,
• Juraj Dian and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2015, 11, 192–199, doi:10.3762/bjoc.11.20

• , Czech Republic Department of Chemical Physics and Optics, Faculty of Mathematics and Physics, Charles University in Prague, Ke Karlovu 3, 121 16, Prague 2, Czech Republic 10.3762/bjoc.11.20 Abstract The thermal stability of the monosubstituted cationic cyclodextrin (CD) derivatives PEMEDA-β-CD and

Synthesis and biological evaluation of a novel MUC1 glycopeptide conjugate vaccine candidate comprising a 4’-deoxy-4’-fluoro-Thomsen–Friedenreich epitope

• Manuel Johannes,
• Maximilian Reindl,
• Bastian Gerlitzki,
• Edgar Schmitt and
• Anja Hoffmann-Röder

Beilstein J. Org. Chem. 2015, 11, 155–161, doi:10.3762/bjoc.11.15

• , 12 was dissolved in an aqueous 2-(N-morpholine)ethanesulfonic acid (MES buffer) at pH 4.5 (enzyme activity optimum) and incubated with the enzyme in the presence of solubilizing 2,6-di-O-methyl-ß-cyclodextrin at 25 °C [51]. By virtue of analytical HPLC (UV detection based on Fmoc) and mass

• were quantified by HPLC and expressed as a percentage of the corresponding value observed before exposure to enzyme digestion (t = 0); (A): β-cyclodextrin, MES buffer pH 4.5, 25 °C. ELISA of the antiserum of mouse 2 induced by 4’F-TF-Thr6-MUC1(20)-TTox vaccine 18b; coat: 5 µg/mL 4’F-TF-Thr6-MUC1(20

Formation of nanoparticles by cooperative inclusion between (S)-camptothecin-modified dextrans and β-cyclodextrin polymers

• Thorbjørn Terndrup Nielsen,
• Catherine Amiel,
• Laurent Duroux,
• Kim Lambertsen Larsen,
• Lars Wagner Städe,
• Reinhard Wimmer and
• Véronique Wintgens

Beilstein J. Org. Chem. 2015, 11, 147–154, doi:10.3762/bjoc.11.14

• prepared with a degree of substitution of (S)-camptothecin between 3.1 and 10.2%. The binding properties with β-cyclodextrin and β-cyclodextrin polymers were measured by isothermal titration calorimetry and fluorescence spectroscopy, showing no binding with β-cyclodextrin but high binding with β

• -cyclodextrin polymers. In aqueous solution nanoparticles were formed from association between the (S)-camptothecin–dextran polymers and the β-cyclodextrin polymers. Keywords: (S)-camptothecin; cyclodextrins; fluorescence; nanoparticles; ITC; Introduction Cancer remains to be the major cause of mortality in

• size. Interaction with suitable correspondent polymers with pendent cyclodextrins may form nanoparticles with the target properties. In recent years cyclodextrin (CD) polymer-based drug-delivery systems have attracted much attention in this field [7][8]. CDs are cyclic sugar molecules constituted of

Effects of RAMEA-complexed polyunsaturated fatty acids on the response of human dendritic cells to inflammatory signals

• Éva Rajnavölgyi,
• Renáta Laczik,
• Viktor Kun,
• Lajos Szente and
• Éva Fenyvesi

Beilstein J. Org. Chem. 2014, 10, 3152–3160, doi:10.3762/bjoc.10.332

• Eva Rajnavolgyi Renata Laczik Viktor Kun Lajos Szente Eva Fenyvesi Department of Immunology, University of Debrecen, Egyetem tér 1, Debrecen 4032, Hungary CycloLab Cyclodextrin Research & Development Laboratory Ltd., Illatos út 7, Budapest 1097, Hungary 10.3762/bjoc.10.332 Abstract The n−3 fatty

• study we monitored the effects of α-linoleic acid, eicosapentaenoic acid and docosahexaenoic acid solubilized in a dimethyl sulfoxide (DMSO)/ethanol 1:1 mixture or as complexed by randomly methylated α-cyclodextrin (RAMEA) on the inflammatory response of human monocyte-derived dendritic cells (moDC

• ). The use of RAMEA for enhancing aqueous solubility of n−3 fatty acids has the unambiguous advantage over applying RAMEB (the β-cyclodextrin analog), since there is no interaction with cell membrane cholesterol. In vitro differentiated moDC were left untreated or were stimulated by bacterial

Inclusion of trans-resveratrol in methylated cyclodextrins: synthesis and solid-state structures

• Lee Trollope,
• Dyanne L. Cruickshank,
• Terence Noonan,
• Susan A. Bourne,
• Milena Sorrenti,
• Laura Catenacci and
• Mino R. Caira

Beilstein J. Org. Chem. 2014, 10, 3136–3151, doi:10.3762/bjoc.10.331

• derivatised) to establish their effect on the aqueous solubility of trans-resveratrol and to estimate association constants for complex formation. Keywords: cyclodextrin; inclusion complexes; thermal analysis; trans-resveratrol; X-ray structures; Introduction The naturally occurring phytoalexin trans

Release of β-galactosidase from poloxamine/α-cyclodextrin hydrogels

• César A. Estévez,
• José Ramón Isasi,
• Eneko Larrañeta and
• Itziar Vélaz

Beilstein J. Org. Chem. 2014, 10, 3127–3135, doi:10.3762/bjoc.10.330

• available source of calcium and protein. In this work, gels obtained by complexation of Tetronic 90R4 with α-cyclodextrin loaded with β-galactosidase are proposed as a way to administer the enzyme immediately before or with the lactose-containing meal. Both molecules are biocompatible, can form gels in situ

• , and show sustained erosion kinetics in aqueous media. The complex was characterized by FTIR that evidenced an inclusion complex between the polyethylene oxide block and α-cyclodextrin. The release profiles of β-galactosidase from two different matrices (gels and tablets) of the in situ hydrogels have

• , which can be used as supramolecular drug delivery systems [11]. Thus, cyclodextrin-based physical hydrogels assembled through microcrystalline formation are based upon the aggregation of polypseudorotaxane structures [12]. In the case of reverse Tetronics, α-cyclodextrin (composed of six glucose units

Conjugates of methylated cyclodextrin derivatives and hydroxyethyl starch (HES): Synthesis, cytotoxicity and inclusion of anaesthetic actives

• Lisa Markenstein,
• Antje Appelt-Menzel,
• Marco Metzger and
• Gerhard Wenz

Beilstein J. Org. Chem. 2014, 10, 3087–3096, doi:10.3762/bjoc.10.325

• /bjoc.10.325 Abstract The mono-6-deoxy-6-azides of 2,6-di-O-methyl-β-cyclodextrin (DIMEB) and randomly methylated-β-cyclodextrin (RAMEB) were conjugated to propargylated hydroxyethyl starch (HES) by Cu+-catalysed [2 + 3] cycloaddition. The resulting water soluble polymers showed lower critical solution

• than the corresponding monomeric CD derivatives. Since the binding potentials of these CD conjugates were very high, they are promising candidates for new oral dosage forms of anaesthetic actives. Keywords: anaesthetics; complexation; cyclodextrin; LCST; lower critical solution temperature; midazolam

• solubilized in water to allow further use in oral or parenteral dosage forms as an analgesic drug. Also the uptake of midazolam could be improved by complexation in CD derivatives [37][38]. Results and Discussion Cyclodextrin polymers were synthesized by copper-catalyzed [2 + 3] cycloaddition of methylated

Synthetic strategies for the fluorescent labeling of epichlorohydrin-branched cyclodextrin polymers

• Milo Malanga,
• Mihály Bálint,
• István Puskás,
• Kata Tuza,
• Tamás Sohajda,
• László Jicsinszky,
• Lajos Szente and
• Éva Fenyvesi

Beilstein J. Org. Chem. 2014, 10, 3007–3018, doi:10.3762/bjoc.10.319

• Milo Malanga Mihaly Balint Istvan Puskas Kata Tuza Tamas Sohajda Laszlo Jicsinszky Lajos Szente Eva Fenyvesi CycloLab Cyclodextrin Research and Development Laboratory Ltd, Illatos 7, Budapest, H-1097 Hungary 10.3762/bjoc.10.319 Abstract The fluorescent tagging of cyclodextrin derivatives enlarges

• their spectroscopic properties thus generating chemosensors, biological tools for visualization and sophisticated photoresponsive devices. Cyclodextrin polymers, due to the cooperative interactions, exhibit additional properties compared to their monomeric counterpart. These macromolecules can be

• prepared either in well water-soluble form or as gels of high swelling. Two versatile synthetic strategies for introducing a fluorescent tag (rhodamine, fluorescein, nitrobenzofuran or coumarin) into the water-soluble epichlorohydrin branched cyclodextrin polymers were worked out and compared. The

Modification of physical properties of poly(L-lactic acid) by addition of methyl-β-cyclodextrin

• Toshiyuki Suzuki,
• Ayaka Ei,
• Yoshihisa Takada,
• Hiroki Uehara,
• Takeshi Yamanobe and
• Keiko Takahashi

Beilstein J. Org. Chem. 2014, 10, 2997–3006, doi:10.3762/bjoc.10.318

• PLLA and enhanced the drawability. Keywords: crystallinity; DSC; methyl-β-cyclodextrin; poly(L-lactic acid); Raman spectroscopy; Introduction Poly(L-lactic acid) (PLLA) has attracted attention because it is a biodegradable polymer derived from carbon-neutral resources. However, its melting point (Tm

• interactions, a modified CD may improve the mechanical properties of PLLA. Methyl-β-cyclodextrin (MeCD) is soluble in chloroform, as is PLLA, and the affinity of MeCD for PLLA may be sufficient to improve the mechanical properties of PLLA. In order to analyze the interchain interactions of polymers, it is

Synthesis of uniform cyclodextrin thioethers to transport hydrophobic drugs

• Lisa F. Becker,
• Dennis H. Schwarz and
• Gerhard Wenz

Beilstein J. Org. Chem. 2014, 10, 2920–2927, doi:10.3762/bjoc.10.310

• Lisa F. Becker Dennis H. Schwarz Gerhard Wenz Organic Macromolecular Chemistry, Saarland University, Campus C4.2, 66123 Saarbrücken, Germany 10.3762/bjoc.10.310 Abstract Methyl and ethyl thioether groups were introduced at all primary positions of α-, β-, and γ-cyclodextrin by nucleophilic

• the β-cyclodextrin derivatives exhibit very high binding potentials towards the anaesthetic drugs sevoflurane and halothane. Since the resulting inclusion compounds are highly soluble in water at temperatures ≤37 °C they are good candidates for new aqueous dosage forms which would avoid inhalation

• anaesthesia. Keywords: active pharmaceutical ingredient; binding constant; cyclodextrin; derivatization; gas chromatography; sevoflurane; substitution pattern; Introduction Cyclodextrins (CDs) are cyclic oligomers of α-1,4-linked glucose units. Those CDs consisting of 6, 7, and 8 glucose units are called α

Cyclodextrin–polysaccharide-based, in situ-gelled system for ocular antifungal delivery

• Anxo Fernández-Ferreiro,
• Noelia Fernández Bargiela,
• María Santiago Varela,
• Maria Gil Martínez,
• Maria Pardo,
• Antonio Piñeiro Ces,
• José Blanco Méndez,
• Miguel González Barcia,
• Maria Jesus Lamas and
• Francisco.J. Otero-Espinar

Beilstein J. Org. Chem. 2014, 10, 2903–2911, doi:10.3762/bjoc.10.308

• Pharmacy, University of Santiago de Compostela (USC), Praza Seminario de Estudos Galegos s/n, Santiago de Compostela, 15701, Spain 10.3762/bjoc.10.308 Abstract Fluconazole was studied with two different hydrophilic cyclodextrins (hydroxypropyl-β-cyclodextrin (HPBCD) and sulfobutyl ether-β-cyclodextrin

• polysaccharides gellan gum and κ-carrageenan. This system showed good bioadhesive properties and effective control of fluconazole release. Keywords: cyclodextrins; eye drops; fluconazole; hydroxypropyl-β-cyclodextrin; sulfobutylether-β-cyclodextrin; Introduction Fungal keratitis is a serious disease that can

• -Hydroxypropyl-β-cyclodextrin (HPBCD) and sulfobutyl ether-β-cyclodextrin (SBECD) are two chemically modified cyclodextrins frequently used as vehicles to improve drug solubility. The aim of this work is to obtain an ophthalmic drug delivery system for the release of fluconazole (FC) based on the use of ion

Synthesis and characterization of a new photoinduced switchable β-cyclodextrin dimer

• Florian Hamon,
• Claire Blaszkiewicz,
• Marie Buchotte,
• Estelle Banaszak-Léonard,
• Hervé Bricout,
• Sébastien Tilloy,
• Eric Monflier,
• Christine Cézard,
• Laurent Bouteiller,
• Christophe Len and
• Florence Djedaini-Pilard

Beilstein J. Org. Chem. 2014, 10, 2874–2885, doi:10.3762/bjoc.10.304

• -cyclodextrin (β-CD) is known to form supramolecular inclusion complexes with molecules, and such inclusion usually enhances the solubility of water-insoluble substances [1][2][3][4]. Pharmaceutical companies already use these cyclodextrins or their derivatives in their formulations [5][6]. In fact, they have a

• ]. As an exception, Vargas et al. [29] described the synthesis of 1,2,3-triazole-linked azobenzene-cyclodextrin derivatives producing rather good yields but the photoisomerization and inclusion complex properties were not investigated. Here, we report an efficient preparation of a new bis-β-CD with

• with a yield of 49% (Scheme 1) [30]. Then, the carboxylic groups were activated by N-hydroxysuccinimide (NHS) and condensed with mono-6-amino-6-deoxy-β-cyclodextrin (β-CD-NH2) [31] in anhydrous DMF at room temperature. Flash chromatography (C18 column, H2O/MeOH 90:10 to 10:90 v/v in 20 min) afforded

Synthesis of modified cyclic and acyclic dextrins and comparison of their complexation ability

• Kata Tuza,
• László Jicsinszky,
• Tamás Sohajda,
• István Puskás and
• Éva Fenyvesi

Beilstein J. Org. Chem. 2014, 10, 2836–2843, doi:10.3762/bjoc.10.301

• Kata Tuza Laszlo Jicsinszky Tamas Sohajda Istvan Puskas Eva Fenyvesi CycloLab Cyclodextrin R&D Laboratory Ltd, Illatos út 7, Budapest, 1097, Hungary Dipartimento di Scienza e Tecnologia del Farmaco, Universitá di Torino, via P. Giuria 9, Turin, 10125, Italy 10.3762/bjoc.10.301 Abstract We

• ; cyclodextrin; ibuprofen; maltodextrin; maltoheptaose; maltohexaose; maltooctaose; Introduction The complexing ability of amylose to iodine and fatty acids is well known in the literature [1][2][3]. The question is raised whether the maltooligomers containing 6, 7, or 8 glucose units (G6, G7 and G8), derived

• applied for the native compounds. The guest candidates were chlorpheniramine, histidine, ibuprofen, camphoric acid, and chrysanthemic acid. Most of the guest compounds were racemates in order to detect enantiorecognition ability if there is any. In most cases the maltooligomers and the cyclodextrin

A study on the inhibitory mechanism for cholesterol absorption by α-cyclodextrin administration

• Takahiro Furune,
• Naoko Ikuta,
• Yoshiyuki Ishida,
• Hinako Okamoto,
• Daisuke Nakata,
• Keiji Terao and
• Norihiro Sakamoto

Beilstein J. Org. Chem. 2014, 10, 2827–2835, doi:10.3762/bjoc.10.300

• , α-cyclodextrin (α-CD) is reportedly one of the most powerful dietary fibers for decreasing blood cholesterol. However, it is difficult to believe that α-CD directly removes cholesterol because it has a very low affinity for cholesterol and its mechanism of action is less well understood than those

• dietary fibers. The decrease in micellar cholesterol solubility in the FeSSIF was the strongest with α-CD addition. Keywords: α-cyclodextrin; bile salt micelles; cholesterol; lecithin; micellar solubility; Introduction α-Cyclodextrin (α-CD) is a ring molecule composed of six glucose units that has an

Thermal and oxidative stability of the Ocimum basilicum L. essential oil/β-cyclodextrin supramolecular system

• Daniel I. Hădărugă,
• Nicoleta G. Hădărugă,
• Corina I. Costescu,
• Ioan David and
• Alexandra T. Gruia

Beilstein J. Org. Chem. 2014, 10, 2809–2820, doi:10.3762/bjoc.10.298

• Ocimum basilicum L. essential oil and its β-cyclodextrin (β-CD) complex have been investigated with respect to their stability against the degradative action of air/oxygen and temperature. This supramolecular system was obtained by a crystallization method in order to achieve the equilibrium of complexed

• . essential oil in comparison with the corresponding β-CD complex. For the first time, the protective capability of natural β-CD for labile basil essential oil compounds has been demonstrated. Keywords: basil; β-cyclodextrin; GC–MS analysis; nanoencapsulation; Ocimum basilicum L. essential oil; thermal and

Synthesis of an organic-soluble π-conjugated [3]rotaxane via rotation of glucopyranose units in permethylated β-cyclodextrin

• Jun Terao,
• Yohei Konoshima,
• Akitoshi Matono,
• Hiroshi Masai,
• Tetsuaki Fujihara and
• Yasushi Tsuji

Beilstein J. Org. Chem. 2014, 10, 2800–2808, doi:10.3762/bjoc.10.297

• -phenylene) and oligothiophene with a pseudo-linked [3]rotaxane structure by full rotation of glucopyranose units via a flipping (tumbling) mechanism in the π-conjugated guest having two permethylated β-cyclodextrin units at both ends. We also succeeded in the synthesis of an organic-soluble fixed [3

• ; permethylated cyclodextrin; [3]rotaxane; Introduction Insulated molecular wires (IMWs) [1][2], which feature π-conjugated polymer chains covered by protective sheaths, have attracted considerable attention as next-generation mono-molecular electronic devices because of their potential conductivity and

• luminescent properties [3][4][5]. Cyclodextrin (CD) derivatives are widely used as a protective sheath for the synthesis of IMWs because they are easily obtainable and efficient in the inclusion of various polymers into their cavity via hydrophobic interactions in water [6][7]. General methods for the

Binding mode and free energy prediction of fisetin/β-cyclodextrin inclusion complexes

• Bodee Nutho,
• Wasinee Khuntawee,
• Chompoonut Rungnim,
• Piamsook Pongsawasdi,
• Peter Wolschann,
• Alfred Karpfen,
• Nawee Kungwan and
• Thanyada Rungrotmongkol

Beilstein J. Org. Chem. 2014, 10, 2789–2799, doi:10.3762/bjoc.10.296

• to investigate the preferential binding mode and encapsulation of the flavonoid fisetin in the nano-pore of β-cyclodextrin (β-CD) at the molecular level using various theoretical approaches: molecular docking, molecular dynamics (MD) simulations and binding free energy calculations. The molecular

• complexes. In addition, the quantum mechanics calculations with M06-2X/6-31G(d,p) clearly showed that both solvation effect and BSSE correction cannot be neglected for the energy determination of the chosen system. Keywords: cyclodextrin; fisetin; flavonoid; MM-PBSA; molecular dynamics simulation; QM-PBSA

• cell defense and cell protection from oxidative conditions [15]. Though several pharmaceutical uses of fisetin are possible, the application is frequently confined by its low water solubility (<1 mg/g) [16]. β-Cyclodextrin (β-CD, Figure 2) is a cyclic oligosaccharide composed of seven α-D-glucopyranose

Preparation and evaluation of cyclodextrin polypseudorotaxane with PEGylated liposome as a sustained release drug carrier

• Kayoko Hayashida,
• Taishi Higashi,
• Daichi Kono,
• Keiichi Motoyama,
• Koki Wada and
• Hidetoshi Arima

Beilstein J. Org. Chem. 2014, 10, 2756–2764, doi:10.3762/bjoc.10.292

Removal of volatile organic compounds using amphiphilic cyclodextrin-coated polypropylene

• Ludmilla Lumholdt,
• Sophie Fourmentin,
• Thorbjørn T. Nielsen and
• Kim L. Larsen

Beilstein J. Org. Chem. 2014, 10, 2743–2750, doi:10.3762/bjoc.10.290

• , F-59140 Dunkerque, France 10.3762/bjoc.10.290 Abstract Polypropylene nonwovens were functionalised using a self-assembled, amphiphilic cyclodextrin coating and the potential for water purification by removal of pollutants was studied. As benzene is one of the problematic compounds in the Water

• organic compounds are known to form stable inclusion complexes with cyclodextrins. Six different amphiphilic cyclodextrin derivatives were synthesised in order to elucidate whether or not the uptake abilities of the coating depend on the structure of the derivative. Headspace gas chromatography was used

• water was obtained as de-ionised water. Preparation of amphiphilic cyclodextrin-coated polypropylene Pieces of PP were cut into suitable sizes, washed in warm ethanol and dried prior to use. Coating solutions consisting of 1 mg/mL of amphiphilic CD derivative and ethanol/water ratios of either 100/0, 80

Anomalous diffusion of Ibuprofen in cyclodextrin nanosponge hydrogels: an HRMAS NMR study

• Monica Ferro,
• Franca Castiglione,
• Carlo Punta,
• Lucio Melone,
• Walter Panzeri,
• Barbara Rossi,
• Francesco Trotta and
• Andrea Mele

Beilstein J. Org. Chem. 2014, 10, 2715–2723, doi:10.3762/bjoc.10.286

• .10.286 Abstract Ibuprofen sodium salt (IP) was encapsulated in cyclodextrin nanosponges (CDNS) obtained by cross-linking of β-cyclodextrin with ethylenediaminetetraacetic acid dianhydride (EDTAn) in two different preparations: CDNSEDTA 1:4 and 1:8, where the 1:n notation indicates the CD to EDTAn molar

• -linked polymers; cyclodextrin nanosponges; diffusion; HRMAS NMR spectroscopy; TEM; Introduction Cyclodextrin nanosponges (CDNS) are a novel, promising class of nanoporous, three-dimensional polymers with interesting properties of sorption of both organic and inorganic species [1][2][3]. Indeed, several

• synthesis consists of the condensation of OH groups of the glucose units of cyclodextrin (CD) with a suitable, poly-functional cross-linker agent, generally an activated derivative of a tetracarboxylic acid, such as ethylenediaminetetraacetic acid dianhydride (EDTAn) [12], pyromellitic anhydride (PMA), or a

Linear-g-hyperbranched and cyclodextrin-based amphiphilic block copolymer as a multifunctional nanocarrier

• Yamei Zhao,
• Wei Tian,
• Guang Yang and
• Xiaodong Fan

Beilstein J. Org. Chem. 2014, 10, 2696–2703, doi:10.3762/bjoc.10.284

• achieve controlled drug release. An amphiphilic, triblock polymer (ABC) with hyperbranched polycarbonsilane (HBPCSi) and β-cyclodextrin (β-CD) moieties were first synthesized by the combination of a two-step reversible addition-fragmentation transfer polymerization into a pseudo-one-step hydrosilylation

• exhibit controlled drug release based on the diffusion release mechanism. The novel multifunctional nanocarrier may be applicable to produce highly efficient and specialized delivery systems for drugs, genes, and diagnostic agents. Keywords: amphiphilic block copolymer; cyclodextrin polymer

• goal of this research is to engineer a multifunctional nanocarrier for addressing the above issues simultaneously. Specifically, a novel ABC based on the linear-hyperbranched-cyclodextrin (CD) ternary system (Scheme 1A–C) was designed, which can self-assemble into the core–shell structured micelles

A green approach to the synthesis of novel phytosphingolipidyl β-cyclodextrin designed to interact with membranes

• Yong Miao,
• Florence Djedaïni-Pilard and
• Véronique Bonnet

Beilstein J. Org. Chem. 2014, 10, 2654–2657, doi:10.3762/bjoc.10.278

• time in cyclodextrin chemistry via solvent-free substitution of aminocyclodextrin followed by the use of a new, more environmentally friendly peptide coupling agent known as COMU (1-cyano-2-ethoxy-2-oxoethylidenaminooxy)dimethylaminomorpholinocarbenium hexafluorophosphate). Finally, by optimized

• (ethyl (hydroxyimino)cyanoacetate), has been reported as a greener, safer and more efficient peptide coupling reagent [12]. It was decided that COMU would be used as a peptide coupling reagent in the modification of cyclodextrin using the described conditions in previous studies [9]. The carboxyl group

• (yield = 80%, see Scheme 1). Indeed, COMU is an efficient peptide coupling reagent and can be used in the synthesis of cyclodextrin derivatives. Insertion of fatty acid chain In previous work, the synthesis of the reaction of permethylated 6-amino-6-deoxy-β-cyclodextrin and vinyl ester catalyzed by

Cyclodextrin-grafted polymers functionalized with phosphanes: a new tool for aqueous organometallic catalysis

• Jonathan Potier,
• Stéphane Menuel,
• David Mathiron,
• Véronique Bonnet,
• Frédéric Hapiot and
• Eric Monflier

Beilstein J. Org. Chem. 2014, 10, 2642–2648, doi:10.3762/bjoc.10.276

• CNRS 3517, 33 rue St Leu, 80039 Amiens, France 10.3762/bjoc.10.276 Abstract New cyclodextrin (CD)-grafted polymers functionalized with water-soluble phosphanes were synthesized in three steps starting from polyNAS. Once characterized by NMR spectroscopy and size-exclusion chromatography, they were

• used as additives in Rh-catalyzed hydroformylation of 1-hexadecene. The combined supramolecular and coordinating properties of these polymers allowed increasing the catalytic activity of the reaction without affecting the selectivities. Keywords: biphasic catalysis; cyclodextrin; hydroformylation

• compartments [6]. We especially developed biphasic catalytic systems in which cyclodextrin (CD) derivatives acted as interfacial additives [7][8]. These torus-like macrorings proved to be appropriate to supramolecularly recognize C8–C10 alkenes within their cavity and convert them into their corresponding

Improving ITC studies of cyclodextrin inclusion compounds by global analysis of conventional and non-conventional experiments

• Eléonore Bertaut and
• David Landy

Beilstein J. Org. Chem. 2014, 10, 2630–2641, doi:10.3762/bjoc.10.275

• Eleonore Bertaut David Landy Univ Lille Nord de France, F-59000 Lille, France ULCO, UCEIV, F-59140 Dunkerque, France 10.3762/bjoc.10.275 Abstract The study of 1:1 cyclodextrin inclusion compounds by isothermal titration calorimetry was explored in a theoretical and experimental point of view to

• stability, enthalpy, or solubility. Keywords: cyclodextrins; global analysis; inclusion compounds; isothermal titration calorimetry; non-conventional experiments; Introduction The stability and thermodynamics of cyclodextrin inclusion compounds in solutions may be investigated with various analytical

• limited. As a consequence, most of these methods have not been applied to cyclodextrin complexes. Moreover, not all the non-conventional experiments have been described to date. Finally, while titration efficiency has been thoroughly studied [7][18][19], few is known about the efficiency of non

Synthesis of a resin monomer-soluble polyrotaxane crosslinker containing cleavable end groups

• Ji-Hun Seo,
• Shino Nakagawa,
• Koichiro Hirata and
• Nobuhiko Yui

Beilstein J. Org. Chem. 2014, 10, 2623–2629, doi:10.3762/bjoc.10.274

• -soluble PRX crosslinker can be applied to design degradable photosetting plastics potentially used in the industrial or biomedical field. Keywords: α-cyclodextrin; composite resin; disulfide; polyrotaxane; Vickers hardness; Introduction Polyrotaxane (PRX) is a supermolecule containing host molecules

• , e.g., α-cyclodextrin (α-CD), threaded on a linear guest molecule, e.g., poly(ethylene glycol) (PEG) [1]. The threaded α-CD molecules are known to be reversibly disassembled when a cleavable end-capping group was introduced in the PEGs, and the cleavable reaction was triggered by proper signals [2][3