Recent applications of porphyrins as photocatalysts in organic synthesis: batch and continuous flow approaches

• Rodrigo Costa e Silva,
• Luely Oliveira da Silva,
• Aloisio de Andrade Bartolomeu,
• Timothy John Brocksom and
• Kleber Thiago de Oliveira

Beilstein J. Org. Chem. 2020, 16, 917–955, doi:10.3762/bjoc.16.83

• overcome these issues, and leads to a drastic reduction of reaction time, lower photocatalyst loadings, minimization of the formation of byproducts [2] and uses visible light, which is considered a clean reagent [4]. Overall, visible light combined with organic photocatalysts such as porphyrinoids, make

• platform for dual catalysis due to their ability to promote both metallocatalysis and photocatalysis in a one-pot system [36][37][38][39]. Martin and co-workers carried out the C–O bond cleavage of alcohols using a cobalt porphyrin under visible light irradiation and a carbon monoxide atmosphere (Scheme 11

• highly regioselective photoinduced hydro-defluorination of perfluoroarenes with RhIII(TSPP) [38]. The oxidative addition of the perfluoroarene to the metal complex furnished the active rhodium aryl complex intermediate, which led to the product after visible light irradiation. The hydro-defluorination

Cation-induced ring-opening and oxidation reaction of photoreluctant spirooxazine–quinolizinium conjugates

• Phil M. Pithan,
• Sören Steup and
• Heiko Ihmels

Beilstein J. Org. Chem. 2020, 16, 904–916, doi:10.3762/bjoc.16.82

• irradiation with visible light, as is exemplarily shown for the spiroindolinonaphthoxazine 1a (Scheme 1) [15]. The merocyanine form 1aMC essentially possesses a planar structure, and because of the extended π system, the absorption maximum is significantly red-shifted in comparison to the closed form (e.g

• extended π system or an intramolecular charge transfer (ICT). This property may allow to use visible light with longer wavelength to induce the ring-opening reaction, which would be favorable, e.g., for biological applications. The stilbene etheno bridge, however, may also lead to an intricate photochromic

Photocatalytic deaminative benzylation and alkylation of tetrahydroisoquinolines with N-alkylpyrydinium salts

• David Schönbauer,
• Carlo Sambiagio,
• Timothy Noël and
• Michael Schnürch

Beilstein J. Org. Chem. 2020, 16, 809–817, doi:10.3762/bjoc.16.74

• , electrophilic alkyl radicals were used in several transformations, such as electrophilic cross couplings under nickel catalysis, either with boronic acids [35] or different (aryl)halides [36][37][38]. Furthermore, visible light-promoted uncatalyzed electron transfer via the formation of electron donor–acceptor

Recent advances in photocatalyzed reactions using well-defined copper(I) complexes

• Mingbing Zhong,
• Xavier Pannecoucke,
• Philippe Jubault and
• Thomas Poisson

Beilstein J. Org. Chem. 2020, 16, 451–481, doi:10.3762/bjoc.16.42

• ; reduction; Introduction For a decade, the realm of catalysis has known a significant renewal with the rise of photocatalysis [1]. The fact that a reaction can be carried out, and, more specifically, catalyzed in the presence of visible light and a photosensitive catalyst (organic or organometallic

• organic molecules absorb light in the UV region (UV-A, UV-B, or UV-C), selectivity was a key point to address in photochemistry and photocatalysis using visible light tackled this issue. Moreover, the use of inexpensive and energy-efficient visible light-emitting diodes (LEDs) was an impressive

• , photocatalysis appeared as an interesting alternative to catalyze such transformations, and copper-based catalysts provided interesting reactivities. In 2012, the Reiser group reported a visible light-driven coupling reaction of olefin derivatives with bromo- and iodoalkanes using the Sauvage catalyst as a Cu(I

Photophysics and photochemistry of NIR absorbers derived from cyanines: key to new technologies based on chemistry 4.0

• Bernd Strehmel,
• Christian Schmitz,
• Ceren Kütahya,
• Yulian Pang,
• Anke Drewitz and
• Heinz Mustroph

Beilstein J. Org. Chem. 2020, 16, 415–444, doi:10.3762/bjoc.16.40

• proceeds. Several UV and visible light sensitive compounds in conjunction with or without Cu(II) complexes were used to initiate and control the photo-ATRP process (Scheme 9) [130][131][132][133][134][135][136][137]. In the absence of these photoactive materials, the direct irradiation of Cu(II) was

Visible-light-induced addition of carboxymethanide to styrene from monochloroacetic acid

• Kaj M. van Vliet,
• Nicole S. van Leeuwen,
• Albert M. Brouwer and
• Bas de Bruin

Beilstein J. Org. Chem. 2020, 16, 398–408, doi:10.3762/bjoc.16.38

• glycine and diethyl malonate, are based on nucleophilic substitution of the chlorine [6][7][8][9][10]. In an attempt to find new synthetic applications of monochloroacetic acid we turned our attention to photoredox catalysis. We were inspired by the rebirth of visible light photoredox catalysis, induced

• by the work of Yoon, Stephenson and MacMillan [11]. By selective excitation of an organic or organometallic dye by visible light a species is formed that can act as a single-electron oxidant and single-electron reductant. In this way reactive radical intermediates can be formed catalytically in situ

• , Kokotos and co-workers published a visible light photoredox catalyzed lactone formation from iodoacetic acid and alkenes [29] (Scheme 1). In addition, it has been shown that monochloroacetic acid can be reduced by hydrated electrons [30][31]. The group of Goez developed a strategy for the photoredox

Room-temperature Pd/Ag direct arylation enabled by a radical pathway

• Amy L. Mayhugh and
• Christine K. Luscombe

Beilstein J. Org. Chem. 2020, 16, 384–390, doi:10.3762/bjoc.16.36

• radical; visible light; Introduction π-Conjugated polymers are of significant interest as they have the potential to combine the mechanical flexibility and affordability of synthetic polymers with the optical and electronic properties of semiconductors. One of the limitations to this field’s continued

• the polymerization conditions, no polymerization occurred (Table 1). Additionally, the reaction was completely inhibited when run in the dark. These results indicate that visible light may be responsible for radical generation in the polymerization. To further investigate the possibility of a radical

• mechanism has been recently supported by 13C and 2H KIE experiments for the arylation of benzo[b]thiophene, although at C3 [13]. In contrast to these pathways, the radical trap and dark experiments reported above indicate a hybrid Pd(I) radical species induced by visible light is involved in the catalytic

Recent developments in photoredox-catalyzed remote ortho and para C–H bond functionalizations

• Rafia Siddiqui and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 248–280, doi:10.3762/bjoc.16.26

• issue to the scientific community. In this context, visible light-induced photoredox catalysis, which is thought to be an abundant, inexpensive, renewable, and nonpolluting chemical transformation, has attracted increasing attention during the past years due to the extraordinary competence and

• = C, B, N, O, S) bonds for architecturally simple, yet challenging molecules, which are otherwise highly difficult or impossible to be formed by other methods. These practices count on the competence of metal complexes and organic dyes to convert visible light into chemical energy via SET events

• ]. In photoredox catalysis, visible light gets absorbed by the photocatalyst (PC), which transitions into a photoexcited state (*PC) that can undergo either energy transfer or redox pathways. As can be seen in Figure 4, the redox pathway consists of reductive and oxidative quenching pathways

Potent hemithioindigo-based antimitotics photocontrol the microtubule cytoskeleton in cellulo

• Alexander Sailer,
• Franziska Ermer,
• Yvonne Kraus,
• Rebekkah Bingham,
• Ferdinand H. Lutter,
• Julia Ahlfeld and
• Oliver Thorn-Seshold

Beilstein J. Org. Chem. 2020, 16, 125–134, doi:10.3762/bjoc.16.14

• hemithioindigo-based indanone-like tubulin inhibitors (HITubs) and optimised their cellular potency as antimitotic photopharmaceuticals. These HITubs feature reliable and robust visible-light photoswitching and high fatigue resistance. The use of the hemithioindigo scaffold also permitted us to employ a para

• , all-visible-light photoswitching. Results and Discussion Design strategy for HTIs The HTI-based colchicinoid HOTubs (e.g., HOTub-31) that we previously explored had the HTI photoswitch embedded inside a methoxylation pattern, such that one isomer obeyed the structure–activity relationship (SAR) of

Light-controllable dithienylethene-modified cyclic peptides: photoswitching the in vivo toxicity in zebrafish embryos

• Sergii Afonin,
• Oleg Babii,
• Aline Reuter,
• Volker Middel,
• Masanari Takamiya,
• Uwe Strähle,
• Igor V. Komarov and
• Anne S. Ulrich

Beilstein J. Org. Chem. 2020, 16, 39–49, doi:10.3762/bjoc.16.6

• -closed isomer, while irradiation with visible light (>400 nm) converts the ring-closed isomer back to the ring-open photoform (Figure 1B), thereby affecting the structure and flexibility of the immediate molecular surrounding. We have constructed a number of DAE-containing peptides by incorporating a DAE

Starazo triple switches – synthesis of unsymmetrical 1,3,5-tris(arylazo)benzenes

• Andreas H. Heindl and
• Hermann A. Wegner

Beilstein J. Org. Chem. 2020, 16, 22–31, doi:10.3762/bjoc.16.4

• isomerization can be reversed either by irradiation with visible light (ca. 450 nm) or thermally, upon heating. The thermal back-isomerization rate can be controlled by various factors: Functional group substitutions on the phenyl rings determine the thermal half-lives of (Z)-ABs [1]. For example, o-fluoro

Synthesis and characterization of bis(4-amino-2-bromo-6-methoxy)azobenzene derivatives

• David Martínez-López,
• Amirhossein Babalhavaeji,
• Diego Sampedro and
• G. Andrew Woolley

Beilstein J. Org. Chem. 2019, 15, 3000–3008, doi:10.3762/bjoc.15.296

• ; azonium; molecular switches; ortho substitution; photoisomerization; photoswitch; visible light; Introduction The application of photoswitches to control biological targets has been a driving force for the development of photoswitches that operate at wavelengths that are compatible with cells and tissues

Design, synthesis and investigation of water-soluble hemi-indigo photoswitches for bioapplications

• Daria V. Berdnikova

Beilstein J. Org. Chem. 2019, 15, 2822–2829, doi:10.3762/bjoc.15.275

• that allowed to obtain an RNA-binding hemi-indigo derivative with photoswitchable fluorescent properties. Keywords: hemi-indigo; molecular switches; photochromism; photoswitching; visible light; water solubility; Introduction The application of organic photochromes in biological systems is fraught

• beyond 3000 years have been achieved [14]. Unlike most of the widely applied photochromes (spiropyrans, spirooxazines, chromenes, dithienylethenes, etc.), both forms of hemi-indigo absorb in the visible light region. Therefore, photochemical switching does not require the use of the UV light, which is of

Chemical tuning of photoswitchable azobenzenes: a photopharmacological case study using nicotinic transmission

• Lorenzo Sansalone,
• Jun Zhao,
• Matthew T. Richers and
• Graham C. R. Ellis-Davies

Beilstein J. Org. Chem. 2019, 15, 2812–2821, doi:10.3762/bjoc.15.274

• the cis-4FAB configuration (thermal half-life > 12 days at 37 °C in physiological buffer) and cis–trans photostationary states above 84%. Furthermore, the well-separated n–π* absorption bands of trans- and cis-4FAB allow facile photoswitching with visible light in two optical channels. A convergent 11

• . Keywords: acetylcholine receptors; bidirectional; photoswitchable drug; tetrafluoroazobenzene; visible light; Introduction Starting in 1937, azobenzenes (ABs) have attracted much attention because they undergo a photoreversible chemical transformation of the thermodynamically favored trans configuration

A combinatorial approach to improving the performance of azoarene photoswitches

• Joaquin Calbo,
• Aditya R. Thawani,
• Rosina S. L. Gibson,
• Andrew J. P. White and
• Matthew J. Fuchter

Beilstein J. Org. Chem. 2019, 15, 2753–2764, doi:10.3762/bjoc.15.266

• demonstrate slow thermal Z–E relaxation and the potential to switch with red light, while the o-fluoro compounds reported by Hecht and co-workers [13][14] offer excellent two-way isomerization with visible light and the longest thermal half-life reported for an azobenzene molecule (≈700 days at 25 °C) to date

A photochemical determination of luminescence efficiency of upconverting nanoparticles

• Baptiste Amouroux,
• Clément Roux,
• Jean-Claude Micheau,
• Fabienne Gauffre and
• Christophe Coudret

Beilstein J. Org. Chem. 2019, 15, 2671–2677, doi:10.3762/bjoc.15.260

• diamminetetrakis(thiocyanato)chromate(III)), photochromic dyes have been proposed for such a purpose, mainly from the azobenzene, fulgide or diarylethene families [22]. The latter two are particularly attractive for visible light wavelengths above 400 nm. However, their use is conditioned by their availability and

• attenuated as it crosses the colloidal suspension. Therefore, UCNPs are excited over the entire portion of the 976 nm laser beam that crosses the sample: the resulting visible light source can be considered as a cylinder having for base, the laser section, and for length, the laser path through the cuvette

Probing of local polarity in poly(methyl methacrylate) with the charge transfer transition in Nile red

• Aydan Yadigarli,
• Qimeng Song,
• Sergey I. Druzhinin and
• Holger Schönherr

Beilstein J. Org. Chem. 2019, 15, 2552–2562, doi:10.3762/bjoc.15.248

• particular, the spatial distribution of the dielectric constant measured for thin PMMA films was described using NR as a reported dye [15]. Because NR is (i) a photostable dye, (ii) possesses convenient optical properties, such as excitation with visible light, and fluorescence, which does not overlay with

In search of visible-light photoresponsive peptide nucleic acids (PNAs) for reversible control of DNA hybridization

• Lei Zhang,
• Greta Linden and
• Olalla Vázquez

Beilstein J. Org. Chem. 2019, 15, 2500–2508, doi:10.3762/bjoc.15.243

• , artificial probes activated by visible-light irradiation are highly desired in biological applications. Here, we report two novel types of visible-light photoswitchable peptide nucleic acids (PNAs) based on the molecular transducers: hemithioindigo and tetra-ortho-fluoroazobenzene. Our study reveals that the

• tetra-ortho-fluoroazobenzene–PNA conjugates have promising properties (fast reversible isomerization, exceptional thermal stability, high isomer conversions and sensitivity to visible-light irradiation) as reversible modulators to control oligonucleotide hybridization in biological contexts. Furthermore

• first compounds here reported, may find applications in different fields such as chemical biology, nanotechnology and materials science. Keywords: azobenzene; hemithioindigo; peptide nucleic acid (PNA); photoswitch; visible-light irradiation; Introduction Light-driven control of oligonucleotide

Photochromic diarylethene ligands featuring 2-(imidazol-2-yl)pyridine coordination site and their iron(II) complexes

• Andrey G. Lvov,
• Max Mörtel,
• Anton V. Yadykov,
• Frank W. Heinemann,
• Valerii Z. Shirinian and
• Marat M. Khusniyarov

Beilstein J. Org. Chem. 2019, 15, 2428–2437, doi:10.3762/bjoc.15.235

• irradiation (313 nm, toluene, c = 3.4 × 10−5 M). Inset: fatigue resistance upon multiple subsequent irradiation with UV (365 nm) and visible light (green LED) in acetonitrile. Molecular structure of complexes 8 (top) and 9 (bottom) at 100 K. The H atoms are omitted for clarity; the thermal ellipsoids are

Targeted photoswitchable imaging of intracellular glutathione by a photochromic glycosheet sensor

• Xianzhi Chai,
• Hai-Hao Han,
• Yi Zang,
• Jia Li,
• Xiao-Peng He,
• Junji Zhang and
• He Tian

Beilstein J. Org. Chem. 2019, 15, 2380–2389, doi:10.3762/bjoc.15.230

• ring-closed photoisomer [28]. The absorption band at 550 nm remained unchanged after 3 min of irradiation as the photostationary state (PSS) was reached. The absorption spectra of the ring-opened isomer could be fully recovered upon visible light irradiation (4 min), suggesting a photocycloreversion or

• ring-opening process from the ring-closed photoisomer to the original ring-opened photoisomer. The photo fatigue resistance of Glyco-DTE was then examined at 550 nm via an alternate irradiation with UV and visible light at room temperature. The ring-closing/opening cycles of Glyco-DTE could be repeated

• several times in buffer solution without obvious degradation (Figure 1B), demonstrating the robustness of Glyco-DTE. Figure 1C shows the photoswitching of emission spectra of Glyco-DTE (1 × 10−5 mol/L) in PBS buffer upon alternating UV and visible light irradiation at room temperature. Upon excitation

Excited state dynamics for visible-light sensitization of a photochromic benzil-subsituted phenoxyl-imidazolyl radical complex

• Yoichi Kobayashi,
• Yukie Mamiya,
• Katsuya Mutoh,
• Hikaru Sotome,
• Masafumi Koga,
• Hiroshi Miyasaka and
• Jiro Abe

Beilstein J. Org. Chem. 2019, 15, 2369–2379, doi:10.3762/bjoc.15.229

• Abstract Visible-light sensitized photoswitches have been paid particular attention in the fields of life sciences and materials science because long-wavelength light reduces photodegradation, transmits deep inside of matters, and achieves the selective excitation in condensed systems. Among various

• switching speed of PIC opened up various potential applications, no photosensitivity to visible light limits its applications. In this study, we synthesized a visible-light sensitized PIC derivative conjugated with a benzil unit. Femtosecond transient absorption spectroscopy revealed that the benzil unit

• acts as a singlet photosensitizer for PIC by the Dexter-type energy transfer. Visible-light sensitized photochromic reactions of PIC are important for expanding the versatility of potential applications to life sciences and materials science. Keywords: biradical; energy transfer; photochromism

Mono- and bithiophene-substituted diarylethene photoswitches with emissive open or closed forms

• A. Lennart Schleper,
• Mariano L. Bossi,
• Vladimir N. Belov and
• Stefan W. Hell

Beilstein J. Org. Chem. 2019, 15, 2344–2354, doi:10.3762/bjoc.15.227

• open forms with rather low emission efficiency. The photoswitching kinetics was studied at several wavelengths with UV and visible light. New diarylethenes underwent ring-closure reactions by irradiation with UV light (365 nm, 405 nm), and the reversible ring-opening by irradiation with visible light

• (470 nm, 530 nm). The on-switching of fluorescence due to the ring-closure reaction was observed also with visible light of 470 nm (to an extent of 10% for compound SyOTh1) and attributed to the Urbach tail effect. Due to a high degree of fluorescence modulation (>270), good fatigue resistance and

• in RESOLFT microscopy. Urbach tail effect Under irradiation with visible light, most DAEs show complete conversion into the OF, because OFs do not absorb at wavelengths corresponding to the absorption band of the CF. However, compound SyOTh1 presented a remarkably “low” value of αCF→OF [470 nm] = 0.9

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• ’-dCF3bpy)PF6 (1) undergoes photoexcitation with visible light to form the highly oxidizing excited state ·Ir(III) 2. Then, SET from copper carboxylate 4, derived from carboxylic acid 3 with the Cu(II) catalyst to ·Ir(III) 2 provides Cu(III) carboxylate 5, or in the dissociated form, a carboxyl radical and

• efficient method to access ortho-CF3 acetanilides and anilines (Scheme 66b). Recently, Wang and co-workers [127] reported a visible-light-induced Pd-catalyzed ortho-trifluoromethylation of acetanilides. Without the need of an external photocatalyst and additive, various N-substituted anilides and

Aggregation-induced emission effect on turn-off fluorescent switching of a photochromic diarylethene

• Luna Kono,
• Yuma Nakagawa,
• Ayako Fujimoto,
• Ryo Nishimura,
• Yohei Hattori,
• Toshiki Mutai,
• Nobuhiro Yasuda,
• Kenichi Koizumi,
• Satoshi Yokojima,
• Shinichiro Nakamura and
• Kingo Uchida

Beilstein J. Org. Chem. 2019, 15, 2204–2212, doi:10.3762/bjoc.15.217

• changed to blue with increasing the absorption band at 587 nm of the closed-ring isomer 1c, then by visible light irradiation the color disappeared and reproducing the absorption spectra at 285 nm of 1o. The cyclization and cycloreversion reactions of 1 were measured in THF and methanol. The results were

• nm) and AS ONE Handy UV Lamp SLUV-4 (λ = 365 nm) were used. For visible light irradiation, a 500W USHIO SX-UI501XQ Xenon lamp attached with Toshiba color filters (Y-48, Y-44, and UV-29) was used. The Gaussian09 program package [32] was used for geometry optimizations with DFT for ground states and

Azologization and repurposing of a hetero-stilbene-based kinase inhibitor: towards the design of photoswitchable sirtuin inhibitors

• Christoph W. Grathwol,
• Nathalie Wössner,
• Sören Swyter,
• Adam C. Smith,
• Enrico Tapavicza,
• Robert K. Hofstetter,
• Anja Bodtke,
• Manfred Jung and
• Andreas Link

Beilstein J. Org. Chem. 2019, 15, 2170–2183, doi:10.3762/bjoc.15.214

• stilbene motive of selected stilbene 2c by a diazeno group, because photoisomerization of azo dyes was anticipated to proceed fast and reversible by application of UV irradiation and visible light, respectively in this analogue. 5-Diazenylnicotinamide 11 was synthetically accessible in two steps through

• UV irradiation of 365 nm. The photoisomerization could be reversed by exposure to visible light, i.e. 452 nm, albeit the PSS at 452 nm still comprised about 25% of (Z)-11 as determined by HPLC analysis using UV–vis detection at the isosbestic points (Table 2). Light of 500 nm could also reverse

• ), respectively. Visible light radiation of 630 nm (red), 500 nm (green) and 452 nm (blue) was derived from a Paulmann FlexLED 3D strip. All compounds were irradiated in solution, using spectrophotometric grade solvents. Photoisomerization and UV–vis spectra measurement was conducted in quartz cuvettes at room