Realizing active targeting in cancer nanomedicine with ultrasmall nanoparticles

• André F. Lima,
• Giselle Z. Justo and
• Alioscka A. Sousa

Beilstein J. Nanotechnol. 2024, 15, 1208–1226, doi:10.3762/bjnano.15.98

• demonstrated enhanced efficacy in both cell-line-derived and patient-derived in vivo tumor xenograft models (Figure 3D). 5.2 RGD peptide ligands/integrin receptors Liang et al. prepared luminescent AuNCs coated with c(RGDyC) in a one-pot synthesis (Figure 4A) [122]. The peptide comprised two functional parts

• ) Preparation of AuNCs through a one-pot synthesis with c(RGDyc) peptides. The targeted AuNCs were evaluated as radiotherapy sensitizers in tumor-bearing mice. (B) Biodistribution, including tumor accumulation, of targeted vs non-targeted AuNCs. (C) Photographs of dissected tumor tissues following treatment. (D

Laser synthesis of nanoparticles in organic solvents – products, reactions, and perspectives

• Theo Fromme,
• Sven Reichenberger,
• Katharine M. Tibbetts and
• Stephan Barcikowski

Beilstein J. Nanotechnol. 2024, 15, 638–663, doi:10.3762/bjnano.15.54

In situ magnesiothermic reduction synthesis of a Ge@C composite for high-performance lithium-ion batterie anodes

• Ha Tran Huu,
• Ngoc Phi Nguyen,
• Vuong Hoang Ngo,
• Huy Hoang Luc,
• Minh Kha Le,
• Minh Thu Nguyen,
• My Loan Phung Le,
• Hye Rim Kim,
• In Young Kim,
• Sung Jin Kim,
• Van Man Tran and
• Vien Vo

Beilstein J. Nanotechnol. 2023, 14, 751–761, doi:10.3762/bjnano.14.62

• nanoparticles and a carbon matrix using a hydrothermal route has been reported, and the enhancement in the electrochemical performance of Ge@C electrodes was demonstrated [33]. In this work, a one-pot synthesis route has been followed to prepare a Ge@C composite using an in situ magnesiothermic reduction of

Quercetin- and caffeic acid-functionalized chitosan-capped colloidal silver nanoparticles: one-pot synthesis, characterization, and anticancer and antibacterial activities

• Akif Hakan Kurt,
• Elif Berna Olutas,
• Fatma Avcioglu,
• Hamza Karakuş,
• Mehmet Ali Sungur,
• Cansu Kara Oztabag and
• Muhammet Yıldırım

Beilstein J. Nanotechnol. 2023, 14, 362–376, doi:10.3762/bjnano.14.31

• Medical Informatics, Faculty of Medicine, Duzce University, 81620 Duzce, Türkiye Department of Interdisciplinary Neuroscience, Graduate Education Institute, Bolu Abant Izzet Baysal University, 14030 Bolu, Türkiye 10.3762/bjnano.14.31 Abstract The presented study comprises the one-pot synthesis and the

• (P. aeruginosa and E. coli) and Gram-positive (S. aureus and S. epidermidis) bacteria was determined, and dose-dependent antibacterial effects were found. Keywords: Ag NPs; anticancer and antibacterial effects; caffeic acid; chitosan; one-pot synthesis; quercetin; U-118 MG and ARPE-19 cells

• first time the one-pot synthesis of Ch/Q- and Ch/CA-Ag NPs and their biological properties (anticancer and antibacterial). Ag NPs have been prepared and characterized by UV–vis, FTIR, and TEM measurements. In another study of ours, Lomustine, a common drug against glioblastoma cancer, was applied at a

Electrocatalytic oxygen reduction activity of AgCoCu oxides on reduced graphene oxide in alkaline media

• Iyyappan Madakannu,
• Indrajit Patil,
• Bhalchandra Kakade and
• Kasibhatta Kumara Ramanatha Datta

Beilstein J. Nanotechnol. 2022, 13, 1020–1029, doi:10.3762/bjnano.13.89

• electrocatalyst. Results and Discussion The microwave-assisted one-pot synthesis connecting graphene oxide (GO) nanosheets with bi- and trimetallic precursors under alkaline conditions is presented in Figure 1. GO serves as functional network and conducting matrix, while PVP acts as structure-directing agent

Gold(I) N-heterocyclic carbene precursors for focused electron beam-induced deposition

• Cristiano Glessi,
• Aya Mahgoub,
• Cornelis W. Hagen and
• Mats Tilset

Beilstein J. Nanotechnol. 2021, 12, 257–269, doi:10.3762/bjnano.12.21

• iodides [48]. For the triazolium salt the two alkylation reactions were carried out together in a one-pot synthesis [36]. The resulting salts were then reacted with silver oxide to generate the respective Ag(I) NHC complexes. Upon the addition of 1 equiv of gold precursor Au(SMe2)Cl in situ, a

Fabrication of Ag-modified hollow titania spheres via controlled silver diffusion in Ag–TiO₂ core–shell nanostructures

• Bartosz Bartosewicz,
• Malwina Liszewska,
• Bogusław Budner,
• Marta Michalska-Domańska,
• Krzysztof Kopczyński and
• Bartłomiej J. Jankiewicz

Beilstein J. Nanotechnol. 2020, 11, 141–146, doi:10.3762/bjnano.11.12

• carbon template was used in a one-pot synthesis of uniform TiO2–Ag hybrid HSs [16], and of Ag/AgCl modified self-doped TiO2 HSs [17]. Finally, polymer spheres were used as hard-templates in a multistep fabrication of tri-modified TiO2 HSs (Ag–C/N–TiO2) [18], and of silver/TiO2 HSs [19]. Many papers

Green and scalable synthesis of nanocrystalline kuramite

• Andrea Giaccherini,
• Giuseppe Cucinotta,
• Stefano Martinuzzi,
• Enrico Berretti,
• Werner Oberhauser,
• Alessandro Lavacchi,
• Giovanni Orazio Lepore,
• Giordano Montegrossi,
• Maurizio Romanelli,
• Antonio De Luca,
• Massimo Innocenti,
• Vanni Moggi Cecchi,
• Matteo Mannini,
• Antonella Buccianti and
• Francesco Di Benedetto

Beilstein J. Nanotechnol. 2019, 10, 2073–2083, doi:10.3762/bjnano.10.202

• Haën AG), thiourea SC(NH2)2 (TU, Merck), and ethylene glycol (EG, 99%, Alfa Aesar). The solvothermal approach used in this work exploits TU as a sulfide source in a one-pot synthesis with the solvent and the metal salts similar to the synthesis of FeS2 and Cu2ZnSnS4 [35][45] nanopowders. In a two-neck

Growth dynamics and light scattering of gold nanoparticles in situ synthesized at high concentration in thin polymer films

• Corentin Guyot,
• Philippe Vandestrick,
• Ingrid Marenne,
• Olivier Deparis and
• Michel Voué

Beilstein J. Nanotechnol. 2019, 10, 1768–1777, doi:10.3762/bjnano.10.172

• less control over shape and the size of the NPs. In an isotropic film prepared from a homopolymer, we can expect the NPs to be spherical but their growth mechanisms are not yet completely understood and still subject to investigations. Nevertheless, this method, also known as one-pot synthesis, is

Upcycling of polyurethane waste by mechanochemistry: synthesis of N-doped porous carbon materials for supercapacitor applications

• Christina Schneidermann,
• Pascal Otto,
• Desirée Leistenschneider,
• Sven Grätz,
• Claudia Eßbach and
• Lars Borchardt

Beilstein J. Nanotechnol. 2019, 10, 1618–1627, doi:10.3762/bjnano.10.157

• materials that were applied in supercapacitor electrodes. In detail, a mechanochemical solvent-free one-pot synthesis is used and combined with a thermal treatment. Polyurethane is an ideal precursor already containing nitrogen in its backbone, yielding nitrogen-doped porous carbon materials with N content

pH-mediated control over the mesostructure of ordered mesoporous materials templated by polyion complex micelles

• Emilie Molina,
• Mélody Mathonnat,
• Jason Richard,
• Patrick Lacroix-Desmazes,
• Martin In,
• Philippe Dieudonné,
• Thomas Cacciaguerra,
• Corine Gérardin and
• Nathalie Marcotte

Beilstein J. Nanotechnol. 2019, 10, 144–156, doi:10.3762/bjnano.10.14

• ), where C6H11O4N represents the deacetylated unit, C8H13O5N the acetylated unit and C3H6O3 the lactate ion. Preparation of mesostructured silica materials Mesostructured hybrid silica materials were prepared following a one-pot synthesis approach. The concentration of OC and TEOS were fixed with respect

Hybrid Au@alendronate nanoparticles as dual chemo-photothermal agent for combined cancer treatment

• Anouchka Plan Sangnier,
• Romain Aufaure,
• Laurence Motte,
• Claire Wilhelm,
• Erwann Guenin and
• Yoann Lalatonne

Beilstein J. Nanotechnol. 2018, 9, 2947–2952, doi:10.3762/bjnano.9.273

• strategy to increase the PTT efficiency is the combination with magnetic hyperthermia [28], or with chemotherapy [29][30]. Using a one-pot synthesis strategy, we developed Au@alendronate NPs for a combined application of the antitumor activity of alendronate and an efficient gold-mediated PTT. We further

• a one-pot synthesis by simply mixing, in water, gold ions and alendronate molecules as reductant, coating and therapeutic agent. The synthesized Au@alendronate NPs maintain the alendronate antitumor activity, which is greatly improved under NIR laser radiation. These results pave the way for an

Controllable one-pot synthesis of uniform colloidal TiO₂ particles in a mixed solvent solution for photocatalysis

• Jong Tae Moon,
• Seung Ki Lee and
• Ji Bong Joo

Beilstein J. Nanotechnol. 2018, 9, 1715–1727, doi:10.3762/bjnano.9.163

• well as the crystalline properties and performance enhancement of TiO2 photocatalysts calcined at different temperatures. Keywords: mixed solvent; one-pot synthesis; photocatalysts; rhodamine B degradation; sol–gel synthesis; spherical TiO2 particles; Introduction Titanium dioxide (TiO2) is a widely

Nanocomposites comprised of homogeneously dispersed magnetic iron-oxide nanoparticles and poly(methyl methacrylate)

• Sašo Gyergyek,
• David Pahovnik,
• Ema Žagar,
• Alenka Mertelj,
• Rok Kostanjšek,
• Miloš Beković,
• Marko Jagodič,
• Heinrich Hofmann and
• Darko Makovec

Beilstein J. Nanotechnol. 2018, 9, 1613–1622, doi:10.3762/bjnano.9.153

• magnetic nanoparticles are decorated with the PMMA chains that provide colloidal stability in the polymer solution, and secondly, the PMMA matrix is formed simultaneously in a one-pot synthesis. The nanocomposites were precipitated from the colloidal suspension and comprehensively characterized. In the

Understanding the performance and mechanism of Mg-containing oxides as support catalysts in the thermal dry reforming of methane

• Nor Fazila Khairudin,
• Mohd Farid Fahmi Sukri,
• Mehrnoush Khavarian and
• Abdul Rahman Mohamed

Beilstein J. Nanotechnol. 2018, 9, 1162–1183, doi:10.3762/bjnano.9.108

• unstable when the catalyst was exposed to an excessively long treatment time. Wang et al. [119] prepared and analyzed a MgO-SBA-15 catalyst via two different methods, which are the one-pot synthesis method and impregnation method as shown in Figure 9a. As a result, the catalyst prepared using the one-pot

• synthesis showed a better order of MgO-coated sample in the mesostructure of SBA-15, a larger BET surface area, and formed more basic sites compared to the conventional impregnation method. The authors further impregnated the basic sites with nickel metal and tested it in DRM. The MgO-coated Ni/SBA-15

Sugarcane juice derived carbon dot–graphitic carbon nitride composites for bisphenol A degradation under sunlight irradiation

• Lan Ching Sim,
• Jing Lin Wong,
• Chen Hong Hak,
• Jun Yan Tai,
• Kah Hon Leong and
• Pichiah Saravanan

Beilstein J. Nanotechnol. 2018, 9, 353–363, doi:10.3762/bjnano.9.35

• -driven photocatalysis. Prasannan and Imae reported a simple and facile one-pot synthesis of fluorescent CDs from orange waste peels using the hydrothermal carbonization method. As prepared CDs were combined with zinc oxide (ZnO) to degrade naphthol blue–black azo dye under UV irradiation, and the

Co-reductive fabrication of carbon nanodots with high quantum yield for bioimaging of bacteria

• Jiajun Wang,
• Xia Liu,
• Gesmi Milcovich,
• Tzu-Yu Chen,
• Edel Durack,
• Sarah Mallen,
• Yongming Ruan,
• Xuexiang Weng and
• Sarah P. Hudson

Beilstein J. Nanotechnol. 2018, 9, 137–145, doi:10.3762/bjnano.9.16

• and urea during the one-pot synthesis enhances the luminescence of the generated C-dots. Moreover, the prepared C-dots have a high distribution of functional groups on their surface. In this work, C-dots proved to be a suitable nanomaterial for imaging of bacteria and exhibit potential for application

Near-infrared-responsive, superparamagnetic Au@Co nanochains

• Varadee Vittur,
• Arati G. Kolhatkar,
• Shreya Shah,
• Irene Rusakova,
• Dmitri Litvinov and
• T. Randall Lee

Beilstein J. Nanotechnol. 2017, 8, 1680–1687, doi:10.3762/bjnano.8.168

• explored the optical properties of the Au-coated magnetic Co nanochains. Consequently, there have been no reports characterizing both the optical and the magnetic properties of this unique class of nanomaterial. In the present investigation, we describe a one-pot synthesis of magnetic Au@Co nanochains

Fully scalable one-pot method for the production of phosphonic graphene derivatives

• Kamila Żelechowska,
• Marta Prześniak-Welenc,
• Marcin Łapiński,
• Izabela Kondratowicz and
• Tadeusz Miruszewski

Beilstein J. Nanotechnol. 2017, 8, 1094–1103, doi:10.3762/bjnano.8.111

• energy of 0.014 eV. Keywords: functionalized graphene; graphene oxide; one-pot synthesis; phosphonic derivatives; reduced graphene oxide; Introduction Graphene oxide (GO) with its multifunctionality attracts interest in different fields of science. The chemical nature and reactivity of GO have been

• ]. Conclusion The development of industrially applicable methods for the production of graphene derivatives will pave the way for a wider spectrum of applications. In this paper, a simple one-pot synthesis approach for the functionalization of a graphene derivative was presented. The method benefits from the

Structural properties and thermal stability of cobalt- and chromium-doped α-MnO₂ nanorods

• Romana Cerc Korošec,
• Polona Umek,
• Alexandre Gloter,
• Jana Padežnik Gomilšek and
• Peter Bukovec

Beilstein J. Nanotechnol. 2017, 8, 1032–1042, doi:10.3762/bjnano.8.104

• ramsdelitte MnO2 with 1 × 2 tunnel structure could be also used for this purpose. Nanoflakes of this material, arranged in the yolk–shell secondary structure, can be prepared through a simple one-pot synthesis of the precursor solution irradiated with UV light. The incorporation of cobalt into the structure

Synthesis of graphene–transition metal oxide hybrid nanoparticles and their application in various fields

• Arpita Jana,
• Elke Scheer and
• Sebastian Polarz

Beilstein J. Nanotechnol. 2017, 8, 688–714, doi:10.3762/bjnano.8.74

• , bulk quantities of GSs are required. So, for the synthesis of graphene–NP hybrid systems, in most cases, top-down approaches have been used. Different architectures of graphene–NP hybrids can be prepared by this one-pot synthesis method [71]. In another process for the synthesis of graphene–NP hybrids

Straightforward and robust synthesis of monodisperse surface-functionalized gold nanoclusters

• Silvia Varela-Aramburu,
• Richard Wirth,
• Chian-Hui Lai,
• Guillermo Orts-Gil and
• Peter H. Seeberger

Beilstein J. Nanotechnol. 2016, 7, 1278–1283, doi:10.3762/bjnano.7.118

• . The synthesis of small, surface-functionalized gold nanoclusters is greatly dependent on the reaction conditions. Here, we describe a straightforward, efficient and robust room temperature one-pot synthesis of 2 nm gold nanoclusters using thioglucose as a reducing and stabilizing agent, which was

• dynamic light scattering (DLS) (Figure S4, Supporting Information File 1). The one-pot synthesis of Glc-NCs is independent on the temperature between 0 and 90 °C (Figure S5, Supporting Information File 1). The Glc-NCs are more stable than nanoclusters that were stabilized with cetyltrimethylammonium

• L929 cells. Surface functionalization of Glc-NCs with biomolecules opens opportunities for drug delivery applications. A) One-pot synthesis of Glc-NCs at room temperature; B) UV–vis spectra of freshly synthesized Glc-NCs and after three days are indicative of stable particles; C) high-resolution TEM

Synthesis, characterization and in vitro effects of 7 nm alloyed silver–gold nanoparticles

• Simon Ristig,
• Svitlana Chernousova,
• Wolfgang Meyer-Zaika and
• Matthias Epple

Beilstein J. Nanotechnol. 2015, 6, 1212–1220, doi:10.3762/bjnano.6.124

• metal compositions with silver/gold molar ratios of ranging from 90:10 to 10:90. The one-pot synthesis in aqueous medium can easily be modified to gain control over the final particle diameter and the stabilizing agents. The purification of the particles to remove synthesis by-products (which is an

The distribution and degradation of radiolabeled superparamagnetic iron oxide nanoparticles and quantum dots in mice

• Denise Bargheer,
• Artur Giemsa,
• Barbara Freund,
• Markus Heine,
• Christian Waurisch,
• Gordon M. Stachowski,
• Stephen G. Hickey,
• Alexander Eychmüller,
• Jörg Heeren and
• Peter Nielsen

Beilstein J. Nanotechnol. 2015, 6, 111–123, doi:10.3762/bjnano.6.11

• ) fluorescence were synthesized as described in [29]. This was done as a one-pot synthesis using a mixture of hexadecylamine (HDA), trioctylphosphine oxide (TOPO), and trioctylphosphine (TOP) as a stabilizing solvent, following the techniques described by Mekis [44]. As the core size of Qdots is directly related

Inorganic Janus particles for biomedical applications

• Isabel Schick,
• Steffen Lorenz,
• Dominik Gehrig,
• Stefan Tenzer,
• Wiebke Storck,
• Karl Fischer,
• Dennis Strand,
• Frédéric Laquai and
• Wolfgang Tremel

Beilstein J. Nanotechnol. 2014, 5, 2346–2362, doi:10.3762/bjnano.5.244

• ]. These inorganic Janus particles consisting of two different core materials are obtained either via a seed-mediated route using performed seeds or as a one-pot synthesis. However, in both cases the heterogeneous nucleation of a second or third component is taking place, limiting these techniques to