Nanostructured germanium deposited on heated substrates with enhanced photoelectric properties

• Ionel Stavarache,
• Valentin Adrian Maraloiu,
• Petronela Prepelita and
• Gheorghe Iordache

Beilstein J. Nanotechnol. 2016, 7, 1492–1500, doi:10.3762/bjnano.7.142

• transmission electron microscopy (HRTEM) investigations of the Ge:SiO2 thin films deposited on Si substrates at 500 °C are presented. Selected area electron diffraction (SAED) (Figure 2a) and HRTEM (Figure 2b) demonstrate the <112> orientation of Ge-nps. The HRTEM image in Figure 2c shows the spatial

• annealing temperature increases. The shift of peaks position is widely debated in scientific literature and it is partly attributed to the decomposition of the mixed oxide of Ge and Si, (Ge,Si)O2, which helps to reduce tensile strain in the layer [30][33]. In Figure 2, the results of high resolution

Polystyrene-block-poly(ethylene oxide) copolymers as templates for stacked, spherical large-mesopore silica coatings: dependence of silica pore size on the PS/PEO ratio

• Roberto Nisticò,
• Giuliana Magnacca,
• Sushilkumar A. Jadhav and
• Dominique Scalarone

Beilstein J. Nanotechnol. 2016, 7, 1454–1460, doi:10.3762/bjnano.7.137

• characterization High-resolution transmission electron microscopy (HRTEM) was used to evaluate the pore size and morphology of mesoporous silica films after the removal of the polymer templates. Micrographs were obtained by using a JEOL 2010 instrument (300 kV) equipped with a LaB6 filament. For the specimen

Fabrication and characterization of branched carbon nanostructures

• Sharali Malik,
• Yoshihiro Nemoto,
• Hongxuan Guo,
• Katsuhiko Ariga and
• Jonathan P. Hill

Beilstein J. Nanotechnol. 2016, 7, 1260–1266, doi:10.3762/bjnano.7.116

• MWCNTs, namely Baytubes©. Other workers have shown using high resolution transmission electron microscopy (HRTEM) that Baytubes© are parallel-walled in long closed sections and that they are strong and relatively pure [27]. They form around a catalyst and are supplied as loosely agglomerated pellets

Photocurrent generation in carbon nanotube/cubic-phase HfO₂ nanoparticle hybrid nanocomposites

• Protima Rauwel,
• Augustinas Galeckas,
• Martin Salumaa,
• Frédérique Ducroquet and
• Erwan Rauwel

Beilstein J. Nanotechnol. 2016, 7, 1075–1085, doi:10.3762/bjnano.7.101

• the point-to-point resolution was ≈1 Å in STEM mode. High resolution transmission electron microscopy (HRTEM) carried out on the same microscope at 200 kV provided a point-to-point resolution of 2.4 Å. Electron energy loss spectroscopy (EELS) was acquired in STEM mode with an Enfinium spectrometer at

Orientation of FePt nanoparticles on top of a-SiO₂/Si(001), MgO(001) and sapphire(0001): effect of thermal treatments and influence of substrate and particle size

• Martin Schilling,
• Paul Ziemann,
• Zaoli Zhang,
• Johannes Biskupek,
• Ute Kaiser and
• Ulf Wiedwald

Beilstein J. Nanotechnol. 2016, 7, 591–604, doi:10.3762/bjnano.7.52

• transmission electron microscopy (HRTEM); nanoparticles; reflection high-energy electron diffraction (RHEED); solid-phase epitaxy; texture; Introduction Due to their attractive catalytic properties for oxygen reduction reactions (ORR) [1][2] as well as their high magnetocrystalline anisotropy energy density

• pulsed laser deposition (PLD), served as reference samples. The structural properties were probed in situ, particularly texture formation and epitaxy of the specimens by reflection high-energy electron diffraction (RHEED) and, in case of 3 nm nanoparticles, additionally by high-resolution transmission

• electron microscopy (HRTEM) after different annealing steps between 200 and 650 °C. The L10 phase is obtained at annealing temperatures above 550 °C for films and 600 °C for nanoparticles in accordance with previous reports. On the amorphous surface of a-SiO2/Si substrates we find no preferential

Ultrastructural changes in methicillin-resistant Staphylococcus aureus induced by positively charged silver nanoparticles

• Dulce G. Romero-Urbina,
• Humberto H. Lara,
• J. Jesús Velázquez-Salazar,
• M. Josefina Arellano-Jiménez,
• Eduardo Larios,
• Anand Srinivasan,
• Jose L. Lopez-Ribot and
• Miguel José Yacamán

Beilstein J. Nanotechnol. 2015, 6, 2396–2405, doi:10.3762/bjnano.6.246

• induced by AgNPs, which were investigated using various electron microscopy techniques, such as high resolution transmission electron microscopy (HRTEM), high angle annular dark field scanning transmission electron microscopy (HAADF-STEM), scanning electron microscopy (SEM), and energy dispersive X-ray

Heterometal nanoparticles from Ru-based molecular clusters covalently anchored onto functionalized carbon nanotubes and nanofibers

• Deborah Vidick,
• Xiaoxing Ke,
• Michel Devillers,
• Claude Poleunis,
• Arnaud Delcorte,
• Pietro Moggi,
• Gustaaf Van Tendeloo and
• Sophie Hermans

Beilstein J. Nanotechnol. 2015, 6, 1287–1297, doi:10.3762/bjnano.6.133

• nanocarbon surface. In the case of Ru–Pt species, anchoring occurs without reorganization through a ligand exchange mechanism. After thermal treatment, ultrasmall (1–3 nm) bimetal Ru–Pt nanoparticles are formed on the surface of the nanocarbons. Characterization by high resolution transmission electron

• transmission electron microscopy (HRTEM) and high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) using aberration-corrected transmission electron microscopy (AC-TEM). HRTEM images of nanoparticles derived from cluster 4 reveal that they are not well crystallized (Figure 4a

• microscopy (HRTEM) and high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) confirms their bimetal nature on the nanoscale. The obtained bimetal nanoparticles supported on nanocarbon were tested as catalysts in ammonia synthesis and are shown to be active at low temperature

High photocatalytic activity of V-doped SrTiO₃ porous nanofibers produced from a combined electrospinning and thermal diffusion process

• Panpan Jing,
• Wei Lan,
• Qing Su and
• Erqing Xie

Beilstein J. Nanotechnol. 2015, 6, 1281–1286, doi:10.3762/bjnano.6.132

• using field emission scanning electron microscopy (FESEM, Hitachi S-4800) and transmission electron microscopy (TEM, TecnaiTM G2F30, FEI), X-ray diffraction (XRD, Cu Kα, λ = 1.5406 Å), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS, Kratos AXIS

The convenient preparation of stable aryl-coated zerovalent iron nanoparticles

• Olga A. Guselnikova,
• Andrey I. Galanov,
• Anton K. Gutakovskii and
• Pavel S. Postnikov

Beilstein J. Nanotechnol. 2015, 6, 1192–1198, doi:10.3762/bjnano.6.121

• ). In the darkfield image, the nanocrystals are indicated by bright areas. In the high-resolution transmission electron microscopy (HRTEM) image, the atomic planes of the iron crystal lattice are clearly visualized. The NPs are mostly uniform in size with an average core particle diameter of 21 nm with

Transformation of hydrogen titanate nanoribbons to TiO₂ nanoribbons and the influence of the transformation strategies on the photocatalytic performance

• Melita Rutar,
• Nejc Rozman,
• Matej Pregelj,
• Carla Bittencourt,
• Romana Cerc Korošec,
• Andrijana Sever Škapin,
• Aleš Mrzel,
• Srečo D. Škapin and
• Polona Umek

Beilstein J. Nanotechnol. 2015, 6, 831–844, doi:10.3762/bjnano.6.86

•  5A) it is apparent that the hydrothermal conditions are more severe and lead to rougher nanoribbon surfaces. An investigation with high resolution transmission electron microscopy (HRTEM) (Figure 5B) revealed that nanoparticles with a trapezoidal shape were formed on the surfaces of the nanoribbons

Palladium nanoparticles anchored to anatase TiO₂ for enhanced surface plasmon resonance-stimulated, visible-light-driven photocatalytic activity

• Kah Hon Leong,
• Hong Ye Chu,
• Shaliza Ibrahim and
• Pichiah Saravanan

Beilstein J. Nanotechnol. 2015, 6, 428–437, doi:10.3762/bjnano.6.43

• field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), BET surface area, UV–vis diffuse reflectance spectra (UV-DRS), Raman and photoluminescence (PL) analyses. The simple and smart synthesis anchored well the deposition

Morphology, structural properties and reducibility of size-selected CeO_2−x nanoparticle films

• Maria Chiara Spadaro,
• Sergio D’Addato,
• Gabriele Gasperi,
• Francesco Benedetti,
• Paola Luches,
• Vincenzo Grillo,
• Giovanni Bertoni and
• Sergio Valeri

Beilstein J. Nanotechnol. 2015, 6, 60–67, doi:10.3762/bjnano.6.7

• structure by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). The thermal stability of the NPs was investigated by XPS. The aim of this work is to investigate the fundamental relationship between NPs chemical and physical properties, in order to improve the

Carbon nano-onions (multi-layer fullerenes): chemistry and applications

• Juergen Bartelmess and
• Silvia Giordani

Beilstein J. Nanotechnol. 2014, 5, 1980–1998, doi:10.3762/bjnano.5.207

• -resolution transmission electron microscopy (HRTEM) has been widely employed to visualize CNOs and to study the mechanisms of CNO formation and their structural properties. Raman spectroscopy is another useful technique for the structural characterization of CNOs and corroborates the basic graphitic

• ), when referring to CNOs. In this review article, we have usually included the diameter of the utilized CNO nanomaterial, together with their fabrication method. If there are any divergent structural properties from the common definition of CNOs observed, we have included this information as well. High

Synthesis of Pt nanoparticles and their burrowing into Si due to synergistic effects of ion beam energy losses

• Pravin Kumar,
• Udai Bhan Singh,
• Kedar Mal,
• Sunil Ojha,
• Indra Sulania,
• Dinakar Kanjilal,
• Dinesh Singh and
• Vidya Nand Singh

Beilstein J. Nanotechnol. 2014, 5, 1864–1872, doi:10.3762/bjnano.5.197

• /Sn) from 1 to 10. The irradiated films were characterized using Rutherford backscattering spectroscopy (RBS), atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). A TEM image of a cross section of the

Synthesis, characterization, and growth simulations of Cu–Pt bimetallic nanoclusters

• Subarna Khanal,
• Ana Spitale,
• Nabraj Bhattarai,
• Daniel Bahena,
• J. Jesus Velazquez-Salazar,
• Sergio Mejía-Rosales,
• Marcelo M. Mariscal and
• Miguel José-Yacaman

Beilstein J. Nanotechnol. 2014, 5, 1371–1379, doi:10.3762/bjnano.5.150

• characterized by transmission electron microscope (TEM) and high resolution transmission electron microscopy (HRTEM) by using a JEOL 2010F operated at 200 kV. The STEM images were recorded in a Cs-corrected JEOL JEM-ARM 200F operated at 200 kV. HAADF STEM images were obtained with a convergence angle of 26 mrad

Effects of the preparation method on the structure and the visible-light photocatalytic activity of Ag₂CrO₄

• Difa Xu,
• Shaowen Cao,
• Jinfeng Zhang,
• Bei Cheng and
• Jiaguo Yu

Beilstein J. Nanotechnol. 2014, 5, 658–666, doi:10.3762/bjnano.5.77

• the S-M sample, transmission electron microscopy (TEM) observation is carried out. As shown in Figure 3a, the S-M sample is composed of nanoparticles with an average particle size of about 30 nm. The high-resolution transmission electron microscopy (HRTEM) image in Figure 3b clearly shows the lattice

Chemi- vs physisorption in the radical functionalization of single-walled carbon nanotubes under microwaves

• Victor Mamane,
• Guillaume Mercier,
• Junidah Abdul Shukor,
• Jérôme Gleize,
• Aziz Azizan,
• Yves Fort and
• Brigitte Vigolo

Beilstein J. Nanotechnol. 2014, 5, 537–545, doi:10.3762/bjnano.5.63

• min, 10 min and 15 min (Scheme 1). After treatment, the obtained functionalized samples (f-SWNT-5min, f-SWNT-10min and f-SWNT-15min) were analyzed by dispersion tests, high resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and TGA–MS. Figure 1 shows photographs of the

• the G+ band. For high resolution transmission electron microscopy (HRTEM) observations, SWNTs were dispersed in ethanol in a sonication-bath for a few minutes and deposited on a holey carbon copper grid (300 mesh). A Philips CM 200 apparatus was used at an operating voltage of 200 kV. About 10 zones

Plasma-assisted synthesis and high-resolution characterization of anisotropic elemental and bimetallic core–shell magnetic nanoparticles

• M. Hennes,
• A. Lotnyk and
• S. G. Mayr

Beilstein J. Nanotechnol. 2014, 5, 466–475, doi:10.3762/bjnano.5.54

• transmission electron microscopy (HRTEM) investigation was done using a probe-Cs corrected FEI Titan3 G2 60-300 microscope operating at 300 kV acceleration voltage. Energy dispersive X-ray (EDX) analysis was performed by using a FEI SuperX detector with high visibility low-background FEI holder. The data was

• welded bellow to allow for a displacement of the sputter gun under UHV conditions. All particles generated with the present setup were analyzed after transport through air. Scanning electron microscopy (SEM) studies were performed with a Zeiss Ultra 55 (acceleration voltage U = 15 kV). High resolution

Oriented attachment explains cobalt ferrite nanoparticle growth in bioinspired syntheses

• Annalena Wolff,
• Walid Hetaba,
• Marco Wißbrock,
• Stefan Löffler,
• Nadine Mill,
• Katrin Eckstädt,
• Axel Dreyer,
• Inga Ennen,
• Norbert Sewald,
• Peter Schattschneider and
• Andreas Hütten

Beilstein J. Nanotechnol. 2014, 5, 210–218, doi:10.3762/bjnano.5.23

• stages of the growth process using transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), electron energy loss spectroscopy (EELS) and electron diffraction measurements. Results In this bioinspired synthesis, stoichiometric Co2FeO4 discs of hexagonal, diamond

Preparation of NiS/ZnIn₂S₄ as a superior photocatalyst for hydrogen evolution under visible light irradiation

• Liang Wei,
• Yongjuan Chen,
• Jialin Zhao and
• Zhaohui Li

Beilstein J. Nanotechnol. 2013, 4, 949–955, doi:10.3762/bjnano.4.107

• successfully prepared via a facile two-step hydrothermal process. The as-prepared samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). Their photocatalytic performance

• Bruker D8 Advance X-ray diffractometer with Cu Kα radiation. The transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM) images were measured by a JEOL model JEM 2010 EX instrument at an accelerating voltage of 200 kV. The powder particles were supported on a

Low-dose patterning of platinum nanoclusters on carbon nanotubes by focused-electron-beam-induced deposition as studied by TEM

• Xiaoxing Ke,
• Carla Bittencourt,
• Sara Bals and
• Gustaaf Van Tendeloo

Beilstein J. Nanotechnol. 2013, 4, 77–86, doi:10.3762/bjnano.4.9

• the formation of a novel stripe-patterning of nanoclusters on the surface of the CNTs, which may open up new prospects of nanostructuring for applications in nanodevices dependent on the distribution of metal clusters. High-resolution transmission electron microscopy (HRTEM) and high-angle annular

Physics, chemistry and biology of functional nanostructures

• Paul Ziemann and
• Thomas Schimmel

Beilstein J. Nanotechnol. 2012, 3, 843–845, doi:10.3762/bjnano.3.94

• (SHIM). Remarkable also are the breakthroughs in structural insight due to the advent of Cs-corrected high-resolution transmission electron microscopy (HRTEM) [3][4] or spectroscopic imaging in scanning TEM (STEM) [5]. Related to facilities, certainly the worldwide impressive progress of synchrotron

Magnetic-Fe/Fe₃O₄-nanoparticle-bound SN38 as carboxylesterase-cleavable prodrug for the delivery to tumors within monocytes/macrophages

• Hongwang Wang,
• Tej B. Shrestha,
• Matthew T. Basel,
• Raj K. Dani,
• Gwi-Moon Seo,
• Sivasai Balivada,
• Marla M. Pyle,
• Heidy Prock,
• Olga B. Koper,
• Prem S. Thapa,
• David Moore,
• Ping Li,
• Viktor Chikan,
• Deryl L. Troyer and
• Stefan H. Bossmann

Beilstein J. Nanotechnol. 2012, 3, 444–455, doi:10.3762/bjnano.3.51

• revealed by high-resolution transmission electron microscopy (HRTEM) (Figure 1c and Figure 1d), the SN38 loaded Fe/Fe3O4 nanoparticles are crystalline with distinct lattice fringes. Figure 2 shows the powder X-ray diffraction (XRD) pattern of SN38-loaded Fe/Fe3O4 magnetic nanoparticles. Highly crystalline

Template-assisted formation of microsized nanocrystalline CeO₂ tubes and their catalytic performance in the carboxylation of methanol

• Jörg J. Schneider,
• Meike Naumann,
• Christian Schäfer,
• Armin Brandner,
• Heiko J. Hofmann and
• Peter Claus

Beilstein J. Nanotechnol. 2011, 2, 776–784, doi:10.3762/bjnano.2.86

• diameter of ca. 0.75 µm, composed of nanocrystalline agglomerated ceria particles were thus obtained. The 1-D ceramic ceria material was characterized by X-ray diffraction, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), UV–vis and photoluminescence

Simulation of bonding effects in HRTEM images of light element materials

• Simon Kurasch,
• Jannik C. Meyer,
• Daniela Künzel,
• Axel Groß and
• Ute Kaiser

Beilstein J. Nanotechnol. 2011, 2, 394–404, doi:10.3762/bjnano.2.45

• Theoretical Chemistry, University of Ulm, 89069 Ulm, Germany 10.3762/bjnano.2.45 Abstract The accuracy of multislice high-resolution transmission electron microscopy (HRTEM) simulation can be improved by calculating the scattering potential using density functional theory (DFT) [1][2]. This approach accounts