A comprehensive review on electrospun nanohybrid membranes for wastewater treatment

• Senuri Kumarage,
• Imalka Munaweera and
• Nilwala Kottegoda

Beilstein J. Nanotechnol. 2022, 13, 137–159, doi:10.3762/bjnano.13.10

• predominant PEMs [13]. Zhang et al. developed nanohybrid PVDF membranes by incorporating zeolite with enhanced thermal and electrochemical performance for lithium-ion batteries [14]. ENHs have also been used as a heterogeneous catalyst in indole synthesis by Savva et al. by incorporating gold nanoparticles

• metals and other cations, electrospun membranes have been recognized as a promising solution. Most metal ion removing membranes interact with the targeted ions through ionic interactions via functional groups, such as hydroxy groups, carboxyl groups, amino groups, and ester groups, on the membrane

• surface. Hence, a high surface area and the ability to generate abundant functional group at the surface of the membrane makes electrospun membranes the perfect candidate for metal ion removal. CS is one of the most commonly used electrospun natural polymers in heavy metal ion removal. Amine functional

Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

• Viet Van Pham,
• Hong-Huy Tran,
• Thao Kim Truong and
• Thi Minh Cao

Beilstein J. Nanotechnol. 2022, 13, 96–113, doi:10.3762/bjnano.13.7

• cell of rutile SnO2, a Sn4+ ion is bonded to six oxygen ions, and every oxygen atom is coordinated by three Sn4+ ions, forming a (6, 3) coordination structure [44]. When SnO2 materials are prepared as thin films with two to eight layers the bandgap is larger than that of bulk SnO2 and decreases with

• predominantly point defects, that is, defects associated with one lattice point, such as cation or oxygen ion vacancies. OVs determine the physical and chemical properties of metal oxides. Figure 4a shows the natural crystal structure of SnO2 synthesized by vapor transport [48]. The (110) plane of rutile SnO2

Effect of lubricants on the rotational transmission between solid-state gears

• Huang-Hsiang Lin,
• Jonathan Heinze,
• Alexander Croy,
• Rafael Gutiérrez and
• Gianaurelio Cuniberti

Beilstein J. Nanotechnol. 2022, 13, 54–62, doi:10.3762/bjnano.13.3

• either solid-state gears or molecular gears, which are created by top-down approaches (e.g., using focused ion beams [23] or electron beams [24][25] to etch the substrate) or bottom-up approaches such as chemical synthesis [26][27]. The ultimate goal for those miniaturized gears is to implement nanoscale

Sputtering onto liquids: a critical review

• Anastasiya Sergievskaya,
• Adrien Chauvin and
• Stephanos Konstantinidis

Beilstein J. Nanotechnol. 2022, 13, 10–53, doi:10.3762/bjnano.13.2

• electric fields, the latter being generated by the negative voltage applied to the cathode, allow for trapping the plasma electrons near the target surface to enhance gas ionization in that region. Consequently, the ion flux towards the target and the corresponding cathode current is significantly

• unit time (e.g., nanometers per minute) in sputtering-related publications, in the case of SoL, it might be better to present the deposition rate as a flux of particles or a mass deposited onto the liquid surface per unit time. The sputtering process itself is characterized by the so-called ion-induced

• sputtering yield, which represents the probability of sputtering a given number of target atoms for one incident plasma ion. The plasma ion (e.g., Ar+), accelerated towards the surface of the sputter target by the negative potential applied to the cathode, transfers its momentum to the surface atoms, which

Topographic signatures and manipulations of Fe atoms, CO molecules and NaCl islands on superconducting Pb(111)

• Carl Drechsel,
• Philipp D’Astolfo,
• Jung-Ching Liu,
• Thilo Glatzel,
• Rémy Pawlak and
• Ernst Meyer

Beilstein J. Nanotechnol. 2022, 13, 1–9, doi:10.3762/bjnano.13.1

• [47] operated in the frequency-modulation mode (resonance frequency f0 ≈ 25 kHz, spring constant k ≈ 1800 N/m, quality factor Q ≈ 14000, and oscillation amplitude A ≈ 0.5 Å). The tip mounted to the qPlus sensor consists of a 25 μm-thick PtIr wire, shortened and sharpened with a focused ion beam. A

Design aspects of Bi₂Sr₂CaCu₂O_8+δ THz sources: optimization of thermal and radiative properties

• Mikhail M. Krasnov,
• Natalia D. Novikova,
• Roger Cattaneo,
• Alexey A. Kalenyuk and
• Vladimir M. Krasnov

Beilstein J. Nanotechnol. 2021, 12, 1392–1403, doi:10.3762/bjnano.12.103

• on a flat portion of Bi-2212 surface, followed by argon-ion etching of the unprotected parts of Au and Bi-2212, the deposition of insulating SiO2 or CaF2 layers and a lift-off of the photoresist at the line. The depth of Bi-2212 etching at this stage (dm ≈ 200–400 nm) defines the height of mesas and

• photolithography and argon-ion etching. Mesa structures are formed at the overlap between the line and the electrodes, as indicated in Figure 1a. Figure 2a,b shows current–voltage (I–V) characteristics of mesas of whisker- and crystal-based devices, respectively. The I–V curves are fairly similar. They contain

Measurement of polarization effects in dual-phase ceria-based oxygen permeation membranes using Kelvin probe force microscopy

• Kerstin Neuhaus,
• Christina Schmidt,
• Liudmila Fischer,
• Wilhelm Albert Meulenberg,
• Ke Ran,
• Joachim Mayer and
• Stefan Baumann

Beilstein J. Nanotechnol. 2021, 12, 1380–1391, doi:10.3762/bjnano.12.102

• microscopy; oxygen permeation; Introduction Acceptor-doped cerium dioxide, where cerium is partially substituted by cations of lower valence (most prominently Gd3+), is a fluorite material with a very high oxide ion conductivity at comparably moderate temperatures (around 600 °C). It has already been in

• focus of research for roughly 50 years [1]. The ion conductivity is combined with a moderate electron conductivity, which strongly depends on the oxygen partial pressure [2][3][4]. These features make ceria an interesting material for high-temperature industrial applications, for example, as oxygen

• spinel or perovskite phase applicable in membrane reactors for partial oxidation reactions. Dual-phase membranes with FeCo2O4, or its iron-rich pendant Fe2CoO4, and Gd-doped ceria as an ion conductor have already been successfully applied as oxygen permeation membranes with high permeability in the

Chemical vapor deposition of germanium-rich CrGe_x nanowires

• Vladislav Dřínek,
• Stanislav Tiagulskyi,
• Roman Yatskiv,
• Jan Grym,
• Radek Fajgar,
• Věra Jandová,
• Martin Koštejn and
• Jaroslav Kupčík

Beilstein J. Nanotechnol. 2021, 12, 1365–1371, doi:10.3762/bjnano.12.100

• species, Ar+ ion sputtering was used. The initial atomic elemental ratio was [Cr]/[Ge]/[O] = 1:7.33:11.61; after 90 s of Ar+ ion sputtering the ratio was [Cr]/[Ge]/[O] = 1:4.41:2.43. The presence of oxygen indicated oxidation after the experiment. The [Cr]/[Ge] atomic elemental ratio of 1:4.41 was

• transfer single NWs onto contact lithographic pads (Supporting Information File 1, Figure S9) to measure their conductivity. The NWs, however, turned out to be fragile and were destroyed when an attempt was made to cut them from the tungsten tip using a focused ion beam (FIB). Therefore, a method to

• with the Ga+ focused ion beam (FIB), gas injection system (GIS), and nanomanipulator OmniProbe 400 (Oxford Instruments) with a tungsten tip. The nanomanipulator enabled a direct contact of single as-grown NWs. The current–voltage (I–V) characteristics were measured using a Keithley 237 source

Cantilever signature of tip detachment during contact resonance AFM

• Devin Kalafut,
• Ryan Wagner,
• Maria Jose Cadena,
• Anil Bajaj and
• Arvind Raman

Beilstein J. Nanotechnol. 2021, 12, 1286–1296, doi:10.3762/bjnano.12.96

• of a sample [6] and observe subsurface features in some biological and electronics samples [7][8][9][10][11][12]. PFM can measure piezoelectric and ferroelectric properties of a sample [13][14][15][16]. ESM can measure the ion diffusion in battery materials [4][17][18][19]. These different AFM

Plasmon-enhanced photoluminescence from TiO₂ and TeO₂ thin films doped by Eu³⁺ for optoelectronic applications

• Marcin Łapiński,
• Jakub Czubek,
• Katarzyna Drozdowska,
• Anna Synak,
• Wojciech Sadowski and
• Barbara Kościelska

Beilstein J. Nanotechnol. 2021, 12, 1271–1278, doi:10.3762/bjnano.12.94

• background subtraction and the least-square Gaussian–Lorentzian – GL(30) curve fitting algorithm. Calibration of obtained spectra to the binding energy of 285 eV for C 1s was conducted. Additionally, a built-in Ar ion gun was used to etch the surface of the films. To obtain depth profiles of the chemical

Electrical, electrochemical and structural studies of a chlorine-derived ionic liquid-based polymer gel electrolyte

• Ashish Gupta,
• Amrita Jain,
• Manju Kumari and
• Santosh K. Tripathi

Beilstein J. Nanotechnol. 2021, 12, 1252–1261, doi:10.3762/bjnano.12.92

• , researchers have been developing polymer electrolytes (solid/gel) as an alternative to commercial liquid-based electrolytes which are suitable for electrochemical devices, such as Li-ion batteries, solar cells, fuel cells, and supercapacitors [1][2][3][4][5]. The main aim is to increase the amorphous content

• in the polymer which assists in the rapid ion motion while keeping its mechanical stability. The second aim is to increase the ionic conductivity of the electrolytes, which is generally insufficient for practical applications in electrochemical energy storage devices. Hence, different kinds of

• predominantly crystalline PVdF phase and an amorphous HFP phase, which provides necessary mechanical strength and good ion transport matrix. Magnesium-based electrochemical devices are emerging as an alternative to lithium-based devices [26][27][28][29][30]. Magnesium can be an alternative due to its

A review on slip boundary conditions at the nanoscale: recent development and applications

• Ruifei Wang,
• Jin Chai,
• Bobo Luo,
• Xiong Liu,
• Jianting Zhang,
• Min Wu,
• Mingdan Wei and
• Zhuanyue Ma

Beilstein J. Nanotechnol. 2021, 12, 1237–1251, doi:10.3762/bjnano.12.91

• related to nanotechnology, such as ion separation and drug discovery, should be investigated and developed. Schematic representation of the definition of slip lengths: (a) no-slip, (b) true slip length, (c) apparent slip length, and (d) effective slip length. Figures 1a–c were redrawn from [49] and Figure

Two dynamic modes to streamline challenging atomic force microscopy measurements

• Alexei G. Temiryazev,
• Andrey V. Krayev and
• Marina P. Temiryazeva

Beilstein J. Nanotechnol. 2021, 12, 1226–1236, doi:10.3762/bjnano.12.90

• parachuting and sticking (Figure 2a). Figure 2a and Figure 2b show the top of a micropipette, which is a probe in scanning ion conductance microscopy [25]. From Figure 2b, we can estimate that the diameter of the intact micropipette at its most protruding part is about 100 nm. To do this, we need to make a

Morphology-driven gas sensing by fabricated fractals: A review

• Vishal Kamathe and
• Rupali Nagar

Beilstein J. Nanotechnol. 2021, 12, 1187–1208, doi:10.3762/bjnano.12.88

• by applying it to the random movement of a metallic ion in a low concentration of electrolyte near a negatively charged electrode [52]. The process resulted in a tree-like scale-invariant structure [52][53]. Figure 2b demonstrates the growth mechanism of a fractal proposed by DLA. Theories of non

Irradiation-driven molecular dynamics simulation of the FEBID process for Pt(PF₃)₄

• Alexey Prosvetov,
• Alexey V. Verkhovtsev,
• Gennady Sushko and
• Andrey V. Solov’yov

Beilstein J. Nanotechnol. 2021, 12, 1151–1172, doi:10.3762/bjnano.12.86

• , novel techniques exploiting the irradiation of nanosystems with collimated electron and ion beams have been developed [2][3]. One of these techniques is electron beam lithography (EBL), which is similar to conventional optical lithography but relies on the change of solubility after electron exposure of

• . Electron impact-induced fragmentation experiments performed for a number of precursor molecules revealed [43][44][45] that the sum of partial cross sections of ionization resulting in the emission of positive ion fragments exceeds significantly (by an order of magnitude) the cross section of ionization

Self-assembly of amino acids toward functional biomaterials

• Huan Ren,
• Lifang Wu,
• Lina Tan,
• Yanni Bao,
• Yuchen Ma,
• Yong Jin and
• Qianli Zou

Beilstein J. Nanotechnol. 2021, 12, 1140–1150, doi:10.3762/bjnano.12.85

• advances in the field of amino acid self-assembly. In this review, we highlight the latest advances in amino acid self-assembly. These self-assembly methods mainly focus on single amino acid self-assembly, modified amino acid self-assembly, amino acid and metal ion coordination self-assembly, and amino

• assemblies at the nanoscale. This component exhibits regular aggregate properties through hydrogen bonding and ion interaction, which are highly similar to those of amyloid components, suggesting that it may be associated with the etiology of amyloid-related diseases. Besides, the resulting structure is as

• characteristics compared to the common noncovalent interactions in self-assembly, such as hydrophobic interactions, van der Waals force, hydrogen bonds, ion attraction, and π–π stacking [57]. Cystine (Cys) can provide carboxyl and amino groups with which it can coordinate with equimolar amounts of cadmium ions

First-principles study of the structural, optoelectronic and thermophysical properties of the π-SnSe for thermoelectric applications

• Muhammad Atif Sattar,
• Najwa Al Bouzieh,
• Maamar Benkraouda and
• Noureddine Amrane

Beilstein J. Nanotechnol. 2021, 12, 1101–1114, doi:10.3762/bjnano.12.82

• prepared the initial structure of the π-SnSe by using experimentally determined atomic coordinates of the π-SnS system by replacing the S ion with Se ions due to the equivalent cubic analog of the π-SnS system [46]. Regarding the crystal structure of π-SnSe, Golan and his team, in 2016, first designated

An overview of microneedle applications, materials, and fabrication methods

• Zahra Faraji Rad,
• Philip D. Prewett and
• Graham J. Davies

Beilstein J. Nanotechnol. 2021, 12, 1034–1046, doi:10.3762/bjnano.12.77

• biotherapeutics, drugs, and vaccines through the skin. A wide range of microneedle structure, design, geometry, and microneedle array densities is manufactured using different rapid prototyping and microfabrication technologies such as deep reactive ion etching (DRIE) [2], lithography [3], hot embossing [4], and

• injection moulding [61], wet chemical etching [75], reactive ion etching [2][76], hot embossing [4][5], laser drilling [77], lithography plus electroforming [78][79], drawing lithography [80][81], two-photon polymerization [5][82], and 3D printing [83][84]. To date, DRIE of silicon; micromoulding

• mask which must be compensated for in the pattern design. Anisotropic etching uses either EDP (ethylenediamine pyrocatechol), hydrazine-based solutions or, most commonly, potassium hydroxide solution. Deep reactive ion etching of silicon is an increasingly common process, performed in a low-pressure

Progress and innovation of nanostructured sulfur cathodes and metal-free anodes for room-temperature Na–S batteries

• Marina Tabuyo-Martínez,
• Bernd Wicklein and
• Pilar Aranda

Beilstein J. Nanotechnol. 2021, 12, 995–1020, doi:10.3762/bjnano.12.75

• systems, but the current lithium-ion battery technology may face limitations in the future concerning the availability of raw materials and socio-economic insecurities. Sodium–sulfur (Na–S) batteries are a promising alternative energy storage device for small- to large-scale applications driven by more

• , lithium-ion batteries (LiBs) are undoubtedly the most important mobile electrical energy storage devices. Nevertheless, they have some critical limitations such as high cost, low resource availability, as well as access and safety concerns [1][5][6]. Therefore, new promising batteries based on widely

• available anode and cathode materials are sought. Table 1 lists some abundant metals as anode materials with high capacity and reduction potential values that are explored in metal-ion batteries [7][8][9]. Besides sodium as alternative anode material, also sulfur as abundant cathode material has emerged due

A Au/CuNiCoS₄/p-Si photodiode: electrical and morphological characterization

• Adem Koçyiğit,
• Adem Sarılmaz,
• Teoman Öztürk,
• Faruk Ozel and
• Murat Yıldırım

Beilstein J. Nanotechnol. 2021, 12, 984–994, doi:10.3762/bjnano.12.74

• great attention due their unique electronic, magnetic, optical, and gas sensing properties. Spinel compounds can be employed in data storage applications, lithium-ion batteries, gas sensors, and medical diagnostics [1][2]. Spinels have a cubic crystal structure with the general chemical formula AB2X4

Is the Ne operation of the helium ion microscope suitable for electron backscatter diffraction sample preparation?

• Annalena Wolff

Beilstein J. Nanotechnol. 2021, 12, 965–983, doi:10.3762/bjnano.12.73

• commonly used approach is the focused ion beam (FIB) polishing. Unfortunately, artefacts that can be easily induced by Ga FIB polishing approaches are seldom published. This work aims to provide a better understanding of the underlying causes for artefact formation and to assess if the helium ion

• microscope is better suited to achieve the required mirror-flat sample surface when operating the ion source with Ne instead of He. Copper was chosen as a test material and polished using Ga and Ne ions with different ion energies as well as incident angles. The results show that crystal structure

• interaction volume, a steady-state condition of ion impurity concentration and number of induced defects is reached. The EBSD measurements and Monte Carlo simulations indicate that when this steady-state condition is reached more quickly, which can be achieved using high-energy Ne ions at a glancing incidence

Uniform arrays of gold nanoelectrodes with tuneable recess depth

• Elena O. Gordeeva,
• Ilya V. Roslyakov,
• Alexey P. Leontiev,
• Alexey A. Klimenko and
• Kirill S. Napolskii

Beilstein J. Nanotechnol. 2021, 12, 957–964, doi:10.3762/bjnano.12.72

• direct-writing using electron beam lithography [11][12] or ion beam milling [13][14]) are limited by the ensemble area and expensive in mass production, but allow one to precisely tune the parameters of an array (a geometry of individual electrodes and the distance between them) over a wide range. An

• mechanical polishing or ion etching and subsequent re-deposition of the current collector. It is worth noting that a great number of Au electrodes within the array is extremely important for a practical application of NEAs under the kinetic control of a target electrochemical process. In this case, the

In situ transport characterization of magnetic states in Nb/Co superconductor/ferromagnet heterostructures

• Olena M. Kapran,
• Roman Morari,
• Taras Golod,
• Evgenii A. Borodianskyi,
• Vladimir Boian,
• Andrei Prepelita,
• Nikolay Klenov,
• Anatoli S. Sidorenko and
• Vladimir M. Krasnov

Beilstein J. Nanotechnol. 2021, 12, 913–923, doi:10.3762/bjnano.12.68

• were used for the calibration of the etching rates of the films. MLs are patterned into micrometer-scale bridges with multiple contacts using photolithography and reactive ion etching. A scanning electron microscopy (SEM) image of one of the studied samples is shown in Figure 1a. Control of the

Modification of a SERS-active Ag surface to promote adsorption of charged analytes: effect of Cu²⁺ ions

• Bahdan V. Ranishenka,
• Andrei Yu. Panarin,
• Irina A. Chelnokova,
• Sergei N. Terekhov,
• Peter Mojzes and
• Vadim V. Shmanai

Beilstein J. Nanotechnol. 2021, 12, 902–912, doi:10.3762/bjnano.12.67

• inversion. This is a key factor for the oligonucleotide detection with Cu2+-modified SERS substrates. The spectrum detection after Cu2+ treatment, followed by washing (which was not working for CuTSPP4), supports that and can be explained by a low Cu2+ ion concentration created by a residual PEI–copper

• microscope in PeakForceQNM mode with recording the adhesion force maps and topographic images. SERS measurements were carried out by using a scanning probe Raman microscope “NanoFlex” (Solar LS, Belarus). The source of excitation at 488.0 nm was an argon ion laser (Melles Griot, USA). Excitation and

• ) were used as a probe analyte. The solutions were drop-cast onto the substrate (ca. 100 µL/cm2), and dried at room temperature. In the case of metal ion addition, 5 mM of the corresponding sulfate was added to the analyte solution. SERS acquisitions parameters The SERS spectra were obtained in back

Comprehensive review on ultrasound-responsive theranostic nanomaterials: mechanisms, structures and medical applications

• Sepand Tehrani Fateh,
• Lida Moradi,
• Elmira Kohan,
• Michael R. Hamblin and
• Amin Shiralizadeh Dezfuli

Beilstein J. Nanotechnol. 2021, 12, 808–862, doi:10.3762/bjnano.12.64

• specific ion channel blockers. They concluded that the simultaneous entry of Ca2+ ions is an indication that the acoustic pressure leads to diffusion of Ca2+ ions through the cell membrane pores [204]. The fact that the intracellular Ca2+ ion concentration depends on the extracellular Ca2+ ion